ActiveX Objects Don't Run Code When Clicked after installing SP3 for 2007

I have an application that I built using Excel 2013 for a client who uses Excel 2007. Up until mid-December of last year, the application ran fine on the client's machines. Today we found that their version does not work - specifically,
clicking an ActiveX command button does not result in code running. Of course, we double-checked to make sure macros were enabled etc. We tested other files and got the same result. We tried running them off of thumb drives, to no avail. We
then learned from their IT guy that a MS security patch, 2984942, was installed on 12/12. Has anyone experienced any issues running VBA code in either 2007 or 2013 after installing that patch? What am I missing?
Thanks in Advance.
Bugless

Similar Messages

After installing SP3 for BO XI R1 - Crystal Reports taking forever to run.

Hello,
We are running BO XI R1 SP3. Ever since installing SP3 a number of our scheduled Crystal Reports are taking forever to run. The Business Objects server resources are okay, CPU never really gets above 50% so I figure perhaps it's our SQL Server.
We run SQL 2005 and CPU on that hovers around 30%, we've got 4 2.6GHz CPUs with 16GB of RAM. Looking in SQL Server activity monitor the reason the reports are taking some time is that the wait types are generally CXPACKET.
For example a report used to process in a minute however after installing SP3 the report now takes several hours. Since we've 4 CPU's on our SQL Server activity monitor creates four sessions for the report to try and process it in parallel. However all of those four sessions have a wait type of CXPACKET. This I understand is related to parallelism and people have said to reduce that so nothing runs in parallel.
However I should not have to do that as things used to run just fine, there is no physical reason (i.e. RAM / CPU / HDD) that reports are locked waiting in SQL server. Has anyone else had this issue or have any suggestions on how to fix please?
Kind regards,
Chris Rutherford

XIR2 has two different redistributable MSI packages. One is compatable with 1.1 framwork applications and the other is compatable with 2.0 framework applications.
try downloading the SP3 MSIs from [here|https://smpdl.sap-ag.de/~sapidp/012002523100009656792008E/crxir2sp3_net_si.zip]
this will have both MSIs
- CrystalReports11_5_NET.msi (for 1.1fwk applications)
- CrystalReports11_5_net_2005.msi (for 2.0fwk applications)
rename the CrystalReports11_5_net_2005.msi to CrystalRedist115_x86.msi and replace the existing file in the Bootstrapper folder path
Uninstall the last install, rebuild and try your Click-Once install again. This time you should have the 11.5.3700.0 runtime.
Dan

When trying to download an APP, it's requesting answers to 3 security questions and it hangs up the iPad when clicking the drop down for the questions...any ideas?

When trying to download an APP, it's requesting setup for answers to 3 security questions and it hangs up the iPad when clicking the drop down for the questions...any ideas?

Had to do a hard reboot on the iPad and we were able to get the questions to pop up. Now it's just slow downloading the apps.

I receive the following error message when trying to install QuickTime for Windows "Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory."

I recieve the following error message when trying to install Quicktime for Windows "Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory." I just trying to get the latest version of iTunes. Thanks

"Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory."
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

After installing "Java for OS X 2013-004" update, Java apps don't work anymore as expected

After installing "Java for OS X 2013-004" update, Java apps don't work anymore as expected.
Windows of Swing apps don't display all GUI elements.
After replacing System/Library/Java from a Time MAchine Backup, everything works normal again.
Is this update corrupted?

"avoid using Java in a web browser at all,..."
Good advice.
"...old Java apps/applets that aren't written to modern specs ..."
The stand-alone Java Swing applications, that don't display their GUI elements after installing this update, have been written according to modern standards. With Oracle Java7, and with Java6 from Apple prior to this update, they run absolutely flawlessly.
This is absolutely Apple's fault.

Error code 213.11 after installing trial version of Photoshop Elements

I keep getting Error Code 213.11 after installing the trail verison of Photoshop Elements. What or how can I fix this.

THANKS FOR YOUR QUICK ANSWER, UNFORTUNATELY THIS IS ALL FOREIGN TO ME, i TRIED FIDNING THE FLEX NET FOLDER AND COULDN'T FIND IT. dO YOU KNOW OF ANY OTHER SOFTWARE THAT ALLOWS YOU TO EASILY PUT YOUR PHOTOS INTO ALREADY EXISTING DIGITAL FRAMES, NOT A DIGITAL FRAME FOR YOUR COMPUTER, BUT WILL LET YOU ADD YOUR OWN FRAMES AND INSERT PHOTOS INTO THEM. i'M AT A WIT'S END ON WHAT TO DO, I'VE TRIED GIMP AND PAINT.NET AND WATCHED VIDEOS ON HOW TO DO THIS AND IT IS NOT ALLOWING ME TO DO IT LIKE IT SHOWS. iS THERE SOME OTHER FORMAT THAT THE DIGITAL EFFECTS FRAMES SHOULD BE IN OR THE PHOTOS, i'M LOSING IT I'VE SPENT COUNTLESS NIGHTS AND CAN'T FIND AN EASY PROGRAM TO LET ME DO THIS. THANKS FOR ANY HELP YOU CAN GIVE ME. LORI

Mail app quits when opened after installing Mavericks. I reinstalled and still the same. I noticed the mail app icon has not changed to the new icon in Mavericks. Any suggestions?

Mail app quits when opened after installing Mavericks. I reinstalled and still the same. I noticed the mail app icon has not changed to the new icon in Mavericks. Any suggestions?

I also forgot to note that this problem also persists with the new iBooks application. I cannot get past the 'Get Started' screen or access the iBooks Store. Again, all top bar menus are unresponsive.
DT

ITunes can't not recognized ipod nano5 when I after installing 10.5.1.42

iTunes can't not recognized ipod nano5 when I after installing 10.5.1.42

used the following prompts:
netsh winsock reset catalog
netsh int ip reset reset.log hit
And it work properly.
Thanks a lot !

HT3910 I am selling my Macbook Air 2008 and need to reformat it back to it's factory settings. I've been reading the help but I don't seem to have a re-install drive for the USB port. Is this something post 2008 or can I get one from somewhere?

I am selling my Macbook Air 2008 and need to reformat it back to it's factory settings. I've been reading the help but I don't seem to have a re-install drive for the USB port. Is this something post 2008 or can I get one from somewhere?

Hey Stella,
Welcome to Apple Support Communities, and thanks for the question! I'd read through the following article before selling your Mac - it'll include instructions on how to reformat your hard drive:
What to do before selling or giving away your Mac
http://support.apple.com/kb/HT5189
All the best,
David

Run code when a radio button is clicked

I have a radio group with various radio buttons in there
named date, time,
reg etc
When I click on a button I need the following:
Which radio button was pressed
The value of that button eg date, time, reg etc
Then run some code (I will use the value to run a MYSQL
query)
The idea is to be able to sort a table based on the header
that was clicked.
Cheers
SteveW

Thanks for the help so far.
I am using dreamweaver 8. ASP VBScript
I would rather not use javascript as our operators have PDA's
and we are
trying to use the same interface for everyone.
What I am trying to do is re-sort a Table by either reg,
date, user order
etc. by clicking on the radio buttons.
The table is populated with MYSQL have a look at
http://80.5.54.164/swiff/contact.asp
user 1 password 1
Unless there is another way to achieve this
Cheers
SteveW
"bregent" <[email protected]> wrote in
message
news:elithk$a5n$[email protected]..
> >Then run some code (I will use the value to run a
MYSQL query)
>
> >The idea is to be able to sort a table based on the
header that was
> >clicked.
>
> Are you trying to sort the table by resubmitting a new
sql query, or sort
> the
> table client side? I would suggest the latter.
>

Photoshop Elements 11 - I was given this as a gift. I cannot get it to install. Nothing comes up to run and when clicking on the file there is no setup

I've tried installing Photoshop elements 11. It does not automatically start up. When clicking on the folder there is no setup. Help. Am I not doing something?

Uninstall and download from here:
Download Photoshop Elements products | 13, 12, 11, 10

I don't see the message "click to install missing plugins" when new ones are required.

Firefox 6 and above does not display "click to install missing plugins" message when I visit AT&T game page. How do I fix this?
Regards,
Dan
[email protected]

Thanks for your reply. Both values are false.

Missing plugin for Quicktime but when click on install missing plugin, it says is updated. Cannot hear sound on my work sms site any longer.

On work sms text site - sound no longer is available. It indicates missing plugun for Quicktime. When clicking on the tab to install missing plugin, Firefox appears to install. Upon checking, all plugins are up to date but sound still no longer works.

The longer this thread continues, the more ancillary comments you throw in that aren't directly pertinent to your problem with your DVR software not working with Firefox 4.0. Sorry, I don't intend to continue with this discussion.
I do agree that ''something'' needs to be done better with regards to plugins for Firefox, but I do disagree with you as to whose responsibility that ''something'' is.

I get an error code when trying to install un update for my photosmart printer

I have a Photosmart 5520 and I updated to a windows 8.1. When trying to install an update for my printer, I get an error code saying unable to update

Hi cjrf,
Thanks for the reply with the error code. I am going to post you a document below. Let me know if this works for you and I will continue to help if need be.
Also, are you experiencing any issues with your Photosmart 5520? Are you unable to perform an action?
Error code
I hope this helps, good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Unable to reinstall OS X Mountain Line Apple ID and Password verified but when click to install ID and Password reappear.

Re-installation of OS X Mountain Line.
Apple ID and Password is verified and correct installation disk is indicated.
After click on "INSTALL" Apple ID and Password verificatrion re-appears.
I've changed ID and Password but to no avail am I allowed to continuie installation.
What is possible going on ?????

Eric,
None of this has worked.
My Apple ID and password work with everything else. I have a good Internet connection. No Firewall active from my IMac.
LIke I said, I haven't installed anything recently and FaceTime ver. 1.0.5 on OS X 10.6.8 was working fine prior to yesterday.
I restarted my IMac to run Mavericks and FaceTime 3.0 under OS X 10.9.4 is working and I was able to login and use FaceTime on Mavericks with no problem.
For some unknown reason FaceTime on IOS and on my Mac were asking me to login into FaceTime when I haven't had to do this for quite sometime.
Older FaceTime 1.0.5 all of a sudden has decided to be a problem with login on my IMac under Snow Leopard.
The only thing left I am going to try is the two-step Apple ID verification process where I can use a app specific password, but Apple makes you wait three days before completing the two-step verification.
If this doesn't work, then I do not know what will solve this issue and now I made my Apple ID login process more complicated than I really wanted it to be.
I purposely stayed away from using the two-step ID verification login.

ActiveX Objects Don't Run Code When Clicked after installing SP3 for 2007

Similar Messages

Maybe you are looking for