ActiveX problem in windows 7 64 bit version...

I have x64 bit windows 7 version operating system i used my all report as printmode="Activex"
1. http://i41.tinypic.com/k9861g.png
Check this URL.
I just want to know after installed the printconrol.dll, how the printcontrol.dll get registered / also in register
entry.
Let me know the procedure...
2.i hAVE INSTALLED THIS Crystal Reports Basic for Visual Studio 2008 x64 Redistributable Package (64 bit) IN MY
WINDOWS 7 64 BIT VERSION ON MY LOCAL PC WHICH HAS NO INTERNET ACCESSS
FROM THIS LINK
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap
(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes
%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636
453735364436323635373233443330333033303331333633343335333033303336%7D.do
YOU HAVE SHOWN HOW TO REGSITER FOR vs2010..
regsvr32 "%programfiles(x86)%SAP BusinessObjectsCrystal Reports for .NET Framework 4.0CommonCrystal Reports
2011crystalreportviewersActiveXControls
BUT IM NOT FINDING THE PATH LIKE the above TO REGISTER MY PRINTCONTROL.DLL IN WIN7 64BIT AFTER INSTALLING Crystal
Reports Basic for Visual Studio 2008 x64 Redistributable Package (64 bit)
so would you please tell me how the above location comes for you..? to REGISTER DLL for us we are not getting the
location in my pc.
3. I COPIED PRINCONTROLL.DLL IN D: drive of win 7 64bit THEN I USED rEGSVR32 D:PRINTCONTROL.DLL IT SHOW DLL
REGSITER succesfully on clicking print button in CR toolbar the print dilogues comes get disapper?let me know whats
the problem. I applied the same pocedure on windows xp machine it works fine..
4. I have printcontrol.dll in downloaded prgram file. I just want to register the dll, it is no registering, please
let me know how to register.
thanks lot to Ludek Uher and Don Williams hows support are very good.. I hope i will get all the aboves in details

1) After Installing this software https://smpdl.sap-ag.de/~sapidp/012002523100009351332008E/CRBasicVS2008_redist_x64.zip what i have to do let me know other steps and will active x print control works or i have to do some more things...
2) i asked you above if i have internet in win 7 64 bit pc on clicking print button it shows me this dialogue
http://i41.tinypic.com/k9861g.png
after clicking Install Printcontrol.dll  it goes to C:\Windows\Downloaded Program Files so how it register i want to know..?
2 point is my important want....
Thanks for your quick reply
Edited by: Priya_here on Nov 16, 2011 6:14 PM

Similar Messages

  • Lightroom 3.2 Installation Problem on Windows 7 64-bit

    Lightroom 3.2 Installation Problem on Windows 7 64-bit
    I can't install Lightroom 3.2 (German) on my computer (Windows 7 Professional 64-bit).
    While copying the extracted program files the following error message appears:
    An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
    I found out that other users had the same problem, and couldn't find a solution.
    Perhaps it is a Microsoft .NET Framework related problem. But after installing .NET Framework 4 nothing changed.
    Thanks for ideas to solve the problem.

    Thanks for your advice, Mr. McLion.
    I downloaded the 3.4.1 version and started the installation as administrator. Unfortunately the same error message occured again.
    Then I tried to install the 32-bit version (although I prefer a 64-bit program on a 64-bit operating system). A similar error message appeared at the same point of installation progress, but with another combination of numbers and letters in brackets.

  • TS3918 I am experiencing this problem on Windows 7 64 bit.  Any suggestions would be appreciated.

    I am experiencing aniTunes reinstall problem on Windows 7 64 bit.    I have uninstalled the iTunes product and reinstalled 11.02 for windows 7 64 bit but can't get iTunes going again.  The first error message I get is: "The file "iTunes Libirary.itl" cannot be read because it was created by a newer version of iTunes".  The next error message I get is:  "There is a problem sending the command to the program."  Any suggestions on what to do next would be appreciated. ( I would have posted this in Windows area had I been given a choice.)

    I believe that message can sometimes be a sign of a corrupt library file, unless of course you've tried to downgrade to an older build of iTunes. Restore it as described in this post.
    tt2

  • ITunes for Windows 7, 64-bit version not connecting to iPod

    Hi, everyone! I'm having problems connecting my iPod Touch to iTunes version 11.0.1.12. I'm running Windows 7, 64-bit version on my PC. Whenever I open iTunes with my iPod Touch connected to my PC, iTunes immediately gives me the following error message:
    "This iPod cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes."
    This confuses me because I already have the 64-bit version for Windows 7 installed on my PC. I've already uninstalled and reinstalled the 64-bit version three times; however, I'm still getting the same error message whenever I connect my iPod Touch and open iTunes.
    Any help would be greatly appreciated. Thanks!

    now nothing happens when I connect the iPod by USB - it's not even charging.
    Do you have a laptop, Nin?
    If so, the following document might be of some assistance with that:
    [iPod not recognized when connected to Windows laptop over USB|http://support.apple.com/kb/TS1401]
    (That issue seems to match your recognition and charging symptoms.)

  • No LaserJet M1319f software bundle for Windows 7 (64 bit) version.

    Does anyone know if HP is going to have the entire software bundle for the HP LaserJet M1319f Multifunction Printer under the Windows 7 (64 bit) version? After updating my software,firmware and drivers for my new Win7-64bit pc I realized there was no software bundle installed. The drivers installed and I can print but no other software. It looks like they have it for the Win7-32bit and I tried to install it just to see if it would work and of course in errored out incompatible. Any information would be appreciated.  

    Below is a link to the HP site to download the printer software for Win 7x64. You will also notice an option to download a printer firmware update that is available for this model printer.
    I hope this helps..
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=3547...
    Dave M.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution.
    I am an HP employee.

  • Compatibility of Quicktime and Windows Vista 64 Bit Version

    I am currently using Win Vista Home Premium 32 bit. However, I'd like to try the 64 bit version (which I have).
    I see the latest version of Itunes is compatible with Windows Vista 64 bit versions. However, that does not appear to be the case with Quicktime. Can anyone confirm this?
    If Quicktime is not compatible with Vista 64 bit, is the so called Quicktime Alternative a viable solution?

    Hi,
    bellow is the link for the latest software download for win vista :
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=2100&lc=en&cc=us&dlc=en&sw_lang=&product=3053...
    I work for HP but my posts and replies are my own.
    Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"

  • IPhone 3GS SYnc problems with Windows 7 64 Bit

    I am having sync problems with windows 7 64 Bit.
    The iPhone syncs a few tracks then hangs, a few minutes later itunes tells me the iphone has timed out.
    Anyone have any ideas about this. I have tried different USB ports, cleaned the apple USB cable contacts with Servisol, restored the iPhone and reinstalled itunes.
    iPhone and iTunes are latest versions.
    Thanks
    Joe

    "Try this connect the iPhone, let the mtp driver installation fail, then go into the device manager and uninstall the unknown mtp device. If you then scan for new hardware from the device manager it should recognize the iPhone & update the driver."
    Ok here's what I did:
    1) Connect the iPhone (iTunes had been installed)
    2) No MTP driver installation is happening as Windows detects iPhone successfully
    3) Open Device Manager
    4) There seems to be 2 drivers for iPhone that are active now, although I still can't see which one is the MPT driver you're referring to.
    One of them sits under Portable Devices: "Apple iPhone". If I view the details of this driver, it lists the following files:
    - C:\Windows\system32\DRIVERS\UMDF\WpdMtpDr.dll
    - C:\Windows\system32\DRIVERS\winusb.sys
    - C:\Windows\system32\DRIVERS\WUDFRd.sys
    - C:\Windows\system32\WpdMtp.dll
    - C:\Windows\system32\WpdMtpUS.dll
    The other one sits under Universal Serial Bus controllers: "Apple Mobile Device USB Driver". And as indicated by Joe above, it lists the following files when I view the Details:
    - C:\Windows\system32\Drivers\usbaapl64.sys
    - C:\Windows\system32\usbaaplrc.dll

  • Oracle database 11g release 2 installation problem on windows 7 (64-bit)

    First of all my windows is not genuine, but on my friend's desktop oracle download and installation  worked fine, he chose "create and configure database" options, and it works very well on his desktop, though his windows is also illegitimate. In my case, when I select "Create and configure database" option and pressed 'next",
    (Go to my blog to see it with snapshots: Computer Science: Oracle database 11g release 2 installation problem on windows 7 (64-bit))
    it asks to select class, I select "Desktop class" and pressed "next". The moment I pressed "next", the whole setup thing disappeared like it was never started. I searched for all possible reasons for why its not getting installed on my laptop, I used registry cleaner s/w,  deleted 25 GB of data to create free space if it were the problem, increased the virtual memory to increase the space for RAM, I did almost everything to get this setup working, but I found no success with the "Create and Configure database" option
    and
    then
    I chose a "database software only" option and chose to store in a folder w/o spaces. This way, I got database s/w only and then later I found "Database configuration Assistant (DBCA)"  from windows START button and clicked to create and configure database manually. The steps are pretty much interactive and doesn't involve much brainstorming.
    The values I filled for
    1) Global Database Name :  orcl
    2) System Identifier : orcl
    3) I chose common password for both SYS and SYSTEM
    4) while on Enterprise Manager Configuration step, It asked me to create and configure listener in oracle home, so for that too, I typed "netca" in windows START menu and clicked it. There I added a listener.
    5) I chose a Storage area which was the Oracle-home itself i.e. where our installation files goes , in my case it is : C:\oracle_base\product\11.2.0\dbhome_1\oradata
    6) Then after few more nitty-gritty clicks, we are set to go !
    Finally to write SQL code and to create your first TABLE , type "sqlplus" in windows "START" menu and click it when it appears. A command-prompt like window appears , which will ask you for username and password, so here they are :
    Username : sys/ as sysdba
    Password : (its the one you created in step 3 stated above )
    After this you are ready to write your first SQL command.

    Is this your solution to your original post at Oracle database 11g release 2 installation on windows 7 (64-bit) ?
    Pl be aware that you should not create any custom objects in SYS or SYSTEM schema - you should create any such objects in a separate custom schema.
    About Database Administrator Security and Privileges

  • For the 2013 versions of macbook pro should I purchase 32 bit windows or 64 bit version to be able to install it on macbook and use windows with bootcamp?

    for the 2013 versions of macbook pro should I purchase 32 bit windows or 64 bit version to be able to install it on macbook and use windows with bootcamp?

    Then you might check at any of the other university book stores or software stores or any computer store in town for the 64-bit version.
    If you want to use the 32-bit version from the school (you probably get it for free or very cheap) then you could purchase Parallels and run it as a virtual machine concurrently with OS X. There are some caveats:
    1. You have to purchase Parallels (there may be an academic discount.) List is $79.95.
    2. Your computer needs minimally 4 GBs of RAM, but realistically 8 GBs would be better.
    3. Parallels creates a pseudo-drive on your hard drive. It could easily require 50 GBs of disk space.
    Accommodating these might be more costly than buying 64-bit Windows 7. And, if you look online you may find them with an academic discount (or may be able to order it through the school.)

  • How can I reinstall Bluetooth drivers after loading windows 7 64 bit version on my 2010 iMac?

    I have just uninstalled windows 7 32 bit version which I have been using for ages and upgraded to the 64 bit version. I did this from the windows partition in my bootcamp divided hard drive. I then reinstalled the drivers using the application DVD which came with my machine but the Bluetooth driver is missing. One thought I have is whether I would be able to use the driver DVD which came with my 2011 MacBook Air (which has been running fine on windows 64bit version since I bought it)
    Would this work or any other ideas?

    moirl wrote:
    5.  I can not get anything off the Blackberry (photos etc.).
    As was stated above:
    1. Go to Options >> Media Card (or Memory)
    (some themes or BlackBerrys may call this "Settings >> Media Card")
    2. Check the following settings (if they are not listed this way, then change to reflect the following:
    a) Media Card Support: On
    b) Mass Storage Mode Support: On
    c) Auto Enable Mass Storage: Yes
    3. Save the settings and exit
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Adobe Acrobat Standard 9.3.1 loads pages very slowly with Windows XP 64 bit version

    Our company has purchased Dell Precision T3500 workstations with Intel XEON processor and 6 Gb of RAM. The operating system is Windows XP 64-bit version. The systems came with Adobe Acrobat Standard 9.3.1. Each one of these workstations load PDF files into Acrobat very slowly. Does anyone have a answer why?

    Quote
    Originally posted by Some1ne
    Here's a step-by-step description of how to install the RealTek RTL8169/8110 driver, as the process isn't quite as straightforward as it should be:
    1.  Download the Windows AMD64 Drivers available here:
    http://www.realtek.com.tw/downloads/downloads1-3.aspx?series=16&Software=True
    2.  Extract the files in the archive to somewhere like c:\win64drivers\ethernet
    3.  Once inside Win XP 64, do the following:
    a.  Click Start -> Settings -> Control Panel -> System -> Hardware -> Device Manager
    b.  Go down to the "Other Devices" section (they'll have yellow ?'s)
    c.  Right click on the ethernet controller and click "Update Driver"
    d.  Click "Install from a list or specific location (Advanced)"
    e.  Click "Dont search.  I will choose the driver to install."
    f.  Double click the "Network Adapter" entry, and then click "Have Disk..."
    g.  Select the directory which you extracted the driver files to
    i.  You will get messages saying that Windows cannot verify that the driver matches your hardware, and that the driver is not WHQL certified.  Ignore these and click "Continue"/"Install Anyways" and your RealTek RTL8169/8110 ethernet adapter will spring to life
    after i have done this the pc just stops. and if i reboot it stops at the loading screen :/ can you tell me whats wrong i got a k8t neo serie card and windows 64 bit edition
    edit: i did it :D works now

  • I have Windows XP, 32 bit version 2002 Svc Pack 2 and when trying to download iTunes 10.5 I am getting the following "The older version of Bonjour cannot be removed.  Contact your tech."  I've tried a good number of remedies to no avail.  Can anyone help?

    I have Windows XP, 32 bit version 2002 Svc Pack 2 and when trying to download iTunes 10.5.1 I am getting the following "The older version of Bonjour cannot be removed.  Contact your technical support."  I've tried a good number of remedies to no avail.  Can anyone help?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If you are running 64-bit Windows and the above steps haven't helped try installing the version of iTunes that can be downloaded from this support document. iTunes 12.1 for Windows (64-bit — for older video cards)
    If you still have no luck try reinstalling iTunes 12.0, links in the user tip.
    tt2

  • I want bootcamp windows7 support software for MacBook Air (mid 2011) , if any one has a windows 7 (32 Bit) version

    I want bootcamp windows7 support software for MacBook Air (mid 2011) , if any one has a windows 7 (32 Bit) version? Please advise. Thanks in Advance.

    Hi Syednz,
    If you are looking for the BootCamp Support Software for your MacBook Air, you may find the following articles helpful:
    Boot Camp: System requirements for Microsoft Windows operating systems
    http://support.apple.com/kb/HT5634
    Apple Support: Boot Camp Support Software 4.0.4326
    http://support.apple.com/kb/DL1636
    Regards,
    - Brenden

  • Installing oracle 9i database in windows x 64 bit version

    Friends, I face difficulties in installing oracle 9i database in windows x 64 bit version 2003 server. The same had worked well with 32 bit version. I could install database and work in the same system in command prompt but the same could not be connected from sqlplus moreover DPCA,Netconfiguaration assistant all are not coming in the graphical way and i couldnt able to connect from the network. which brings ora-06413 error.
    please help me to get installed oracle 9i database in windows 2003 server 64 bit version.

    Go Through Below link
    >>>http://www.oracle.com/technology/software/products/oracle9i/index.html

  • Windows-7 64 bit version

    I am about to download Windows-7 64 bit version on a separate partition as a dual-boot system. Will Adobe Premiere Elements 7 work if I install it there? (Will I find my edites, etc.?) Thanks.

    That is probably a very wise decision, even if your CPU would handle 64-bit. I'm a firm believer in waiting until SP-1 for a given OS, before adopting it. There are too many horror stories in my past. I also do not bother doing any beta testing, as I need all of my computers for work.
    With new technology, both software and hardware, there are dangers being out on the "cutting edge." This is often "blood" on that edge, and I do not want it to be mine.
    Good luck when you build, or buy. So far, the reports on Win7 RC seem very favorable. Here's hoping that it will be the best release of an OS by MS in many decades.
    Hunt

Maybe you are looking for