ActiveX problem

hello
I'm afraid there was huge amount of such questions, but having spent half an hour in Google, I didn't find the real solution
so, that's my problem:
having tried to get "Replace inline" script from there http://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&extid=1046463# , I extracted the archive into "where-I-should" folder, went to window>automation>etc., clicked on the script and got a message "ActiveX component can't create object (run-time error 429)"
as I think, I need to get this script registered, but I never did that kind of things in InD, just .dll's (not .VPB)
can anybody help?
thanks in advance
P.S. I use InD CS3, the way to the folder is C:\Program Files\Adobe\Adobe InDesign CS3\Scripts\Scripts Panel\Version 4.0 Scripts

hi
you can't use it with ID CS3 because it is only for ID 2.0.2
robin
www.adobescripts.com

Similar Messages

ActiveX problems after upgrading to 7.0

I upgraded from 6.1 to 7.0. I kept the 6.1 version intact. Afterwards the ActiveX functions did not work in either version. For example, the 3D plots within Labview did not work. I had to uninstall 7.0 and reinstall 6.1 for it all to work again. Any comments?

Greg McKaskle wrote in message news:<[email protected]>...
> > I upgraded from 6.1 to 7.0. I kept the 6.1 version intact.
> > Afterwards the ActiveX functions did not work in either version. For
> > example, the 3D plots within Labview did not work. I had to uninstall
> > 7.0 and reinstall 6.1 for it all to work again. Any comments?
>
> I suspect that this isn't a general ActiveX problem, but a problem with
> the specific 3D graph control. I don't really know why that happened,
> but the first thing to do would be to install 7.0, on a safe machine and
> see if other ActiveX, such as to Excel, or dropping the calendar control
> works or not. You might then want to search the support site and see if
> this is alr
eady known, otherwise contact them and see if they can help
> you debug it.
>
> Greg McKaskle
Here is a simple test I would do if I fall into such a problem.
I would install LabVIEW Express(7.0)on a windows 2000 machine (a clean
machine would be prefereable).
Then drop a automation open function. Create a Control and then select
an ActiveX class to the Microsoft Common Dialog Control Version 1.0
type library.
Select the CommonDialog (MSComDilg.CommonDialog.1) object.
You can select any of the objects depending on the type library
choosen.
Now go back to the diagram and drop the property node. Connect the
property node and take care the error handling. Now by selecting
different properties, one ata time you can check if there is any error
returned.
Repeat the same procedure with LV 6.1.
If there is an error returned in one property when using LabVIEw
Express but it works fine with LV6.1, then probably this is to be
reported to an Application engineer of NI.
Good luck

ActiveX problems with 3.0.F.2 (fwd)

This is the message I sent to tech support. Has anyone else seen this
type of thing? Any suggestions (even half-baked) would be appreciated.
-- Adam
---------- Forwarded message ----------
Date: Tue, 17 Mar 1998 13:48:17 -0600 (CST)
From: Adam Mckee <[email protected]>
To: [email protected]
Subject: ActiveX problems
Product: Forte
Version of Forte: 3.0.F.2
Server OS: HPUX
Client OS: NT/Win 95
DBMS: Oracle
Reproducible(?): Yes
Brief description of issue:
I have experienced problems using ActiveX controls. I have tried several
controls, including:
o Microsoft Forms 2.0 SpinButton
o Microsoft Forms 2.0 CheckBox
o Microsoft Forms 2.0 EditBox
o AddSoft Gantt/OCX
o Sheridan MonthView
o Sheridan DayView
o Sheridan DateCombo
o Microsoft Calendar Control
(specifically mentioned in a Forte technote)
I have experienced problems with all of these controls. With the Sheridan
DateCombo, the Forte environment crashes when I attempt to drop the
control into a form using the "Insert Control..." button. Before the
environment crashes, I get a series of informational and error dialog
boxes as follows:
o error: unexpected exception -10737415717
o error: The Error Manager stack is empty (repeated 3 times)
o information: the workspace is now read-only because the
repository is disabled.
o error: Exception escaped from terminating task CW.Display
o ERROR: TMgr.Terminate: fatal error terminated partition
With all the other controls I tried, the ActiveX support appears to work
properly until I attempt to bind an instance of the olegen-generated
class to the control itself in the window's Init() method:
--- MyWindowClass.Init() ----
super.Init();
myActiveXControl = new();
After this has been done, the Forte environment may "hang" when I interact
with the control at run-time. For example, each time a generate a mouse
event inside the control, I risk hanging the Forte environment. I might
be able to interact with the control 50 times before the environment
hangs, or it might hang after a single mouse click. Until the crash/hang
occurs, the ActiveX support appears to work properly: I am able to trap
mouse events, and interact with the control using the provided interface.
Any help or advice you can offer would be appreciated. I would be happy
to provide any additional information you may require.
-- Adam McKee

I don’t recall any problems importing to “selected item’ which I always use so I define where it goes and what it’s called.
Do you have Aperture’s Activity Window open so you can see where it is hanging up? Is it just busy generating Previews etc.? I know it sounds more serious than just ‘busy’ but would be interesting to know what it’s doing then.
After these problems, assuming that previews and thumbnails are generated correctly, it may be a good precaution to restart Aperture while holding down the OPTION and COMMAND keys so you can Repair Permissions or Repair the database. Even rebuilding the database is fairly quick if those first two options are ineffective.

ActiveX problem in windows 7 64 bit version...

I have x64 bit windows 7 version operating system i used my all report as printmode="Activex"
1. http://i41.tinypic.com/k9861g.png
Check this URL.
I just want to know after installed the printconrol.dll, how the printcontrol.dll get registered / also in register
entry.
Let me know the procedure...
2.i hAVE INSTALLED THIS Crystal Reports Basic for Visual Studio 2008 x64 Redistributable Package (64 bit) IN MY
WINDOWS 7 64 BIT VERSION ON MY LOCAL PC WHICH HAS NO INTERNET ACCESSS
FROM THIS LINK
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap
(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes
%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636
453735364436323635373233443330333033303331333633343335333033303336%7D.do
YOU HAVE SHOWN HOW TO REGSITER FOR vs2010..
regsvr32 "%programfiles(x86)%SAP BusinessObjectsCrystal Reports for .NET Framework 4.0CommonCrystal Reports
2011crystalreportviewersActiveXControls
BUT IM NOT FINDING THE PATH LIKE the above TO REGISTER MY PRINTCONTROL.DLL IN WIN7 64BIT AFTER INSTALLING Crystal
Reports Basic for Visual Studio 2008 x64 Redistributable Package (64 bit)
so would you please tell me how the above location comes for you..? to REGISTER DLL for us we are not getting the
location in my pc.
3. I COPIED PRINCONTROLL.DLL IN D: drive of win 7 64bit THEN I USED rEGSVR32 D:PRINTCONTROL.DLL IT SHOW DLL
REGSITER succesfully on clicking print button in CR toolbar the print dilogues comes get disapper?let me know whats
the problem. I applied the same pocedure on windows xp machine it works fine..
4. I have printcontrol.dll in downloaded prgram file. I just want to register the dll, it is no registering, please
let me know how to register.
thanks lot to Ludek Uher and Don Williams hows support are very good.. I hope i will get all the aboves in details

1) After Installing this software https://smpdl.sap-ag.de/~sapidp/012002523100009351332008E/CRBasicVS2008_redist_x64.zip what i have to do let me know other steps and will active x print control works or i have to do some more things...
2) i asked you above if i have internet in win 7 64 bit pc on clicking print button it shows me this dialogue
http://i41.tinypic.com/k9861g.png
after clicking Install Printcontrol.dll it goes to C:\Windows\Downloaded Program Files so how it register i want to know..?
2 point is my important want....
Thanks for your quick reply
Edited by: Priya_here on Nov 16, 2011 6:14 PM

LabVIEW, LabJack, activex problem

Hello,
I have a problem
running a LabJack vi with LabVIEW 7.1 but only in one of the user accounts on my
computer. I have a computer that has two
user accounts. There is no problem with account “A”, but when I log into
account “B” and load the LabJack vi I get the message “Control can not be
loaded” on the Front Panel. The name of
the LabJack vi is AISample.vi. I believe
this is an Activex vi and in the system32 folder there is a file called
ljackuwx.ocx. I have run “regsvr32
ljackuwx.oxc” but that did not fix the problem. Please let me know how to fix this problem.
Thank You,
Gary

See the following:
http://www.labjack.com/forums/index.php?showtopic=2669

RT 6.03 and ActiveX problem

If a have installed RT 6.03 the ActiveX does not work (I select activeX
in a container but I dont see anything on it). If remove RT the ActiveX work
fine.
I need solution.
Thanks.

I have install the DAQ 6.9.1 SP2 and my problem fixed.
Thanks.
"Lab Viewer" wrote in message
news:506500000005000000BD6A0000-1016899309000@exchange.ni.com...
> As RT FAQ states (
> href="http://amp.ni.com/niwc/labviewrt/lvrt_faq.jsp?node=2381#8">What
> are the programming differe...
), ActiveX is not supported (being a Windows-specific
> functionality).
>
> Hope this helps

Excel ActiveX Problem

Hello All,
I think every body knew that If I move spreadsheet ActiveX control from one version to other. It will not work and we need to reconnect.
I built an application, which can be used in several countries and mostly I am facing the problem with ActiveX. Because of version change.
Now even we are thinking not to give Microsoft office to the customer to reduce the cost of machine.
So is there any LabVIEW internal tool, which can used to design as Excel and use. It is so important that not to use any ActiveX control of Microsoft.
Please let me know, if any body knows,
Thanks,

LVTestek wrote:
Hello All,
I think every body knew that If I move spreadsheet ActiveX control from one version to other. It will not work and we need to reconnect.
I'm not sure that everybody knows that, and I'm not quite sure I actually understand what you're saying here. Yes, if the ActiveX interface changes then you need to update the code to reflect the API change. I don't understand what you mean by "reconnect".
Now even we are thinking not to give Microsoft office to the customer to reduce the cost of machine.
So is there any LabVIEW internal tool, which can used to design as Excel and use. It is so important that not to use any ActiveX control of Microsoft.
The only thing that NI has available is the Report Generation Toolkit, but that requires Office in order to work. I do recall people asking about an interface to Open Office, but I don't recall how far any kind of development has gone related to that. You can do a search for "Open Office" and see what's available. What are you trying to create? Are you trying to create spiffy reports, or just saving data? If it's the latter you can probably get away with simply writing text files using the Write to Spreadsheet File VI or the Write to Measurement File VI.

ActiveX problems???

Hi all,
My mom just got a mac recently and she hates it. She states "it's not for business applications" and thinks the OSX versions of Office are a joke. Anyway, my problem is that she needs to access a remote desktop terminal via internet explorer for her work and she needs ActiveX to do so (which to my knowledge isn't available to Mac users). Does anyone know a workaround?

"...she needs to access a remote desktop terminal via internet explorer..."
Sounds to me like she's locked in to Windows. Install Windows on the Mac using Boot Camp.
Unfortunately ActiveX is not an open standard/protocol, but one that requires Internet Explorer. Her complaint is really with Microsoft, but good luck convincing her of that.

Re: ActiveX problems with 3.0.F.2 (fwd)

Forte has very specific requirements for ActiveX controls. We found out the
hard way that Forte does not support the use of all ActiveX controls.
Here is some information I received from Mark Cooper at Forte:
With a bit more digging I found that ActiveX controls are required to adhere
to two restrictions in the Forte environment. ActiveX controls are required
to provide a single interface (and cannot include irrelevant nested
interfaces) and must implement Apartment model threading (technote 11344).
You can use the OLE-Com Object Viewer to determine whether a control
fulfills both of these requirements.
Hope this helps. As I understand it, a future release (3G or 4???) will have
better support of ActiveX controls. But in the mean time you are stuck to
these limitations.
Regards,
Jason Carpenter
CSC Consulting & Systems Integration
[email protected]
3811 Turtle Creek Blvd.
20th Floor
Dallas, TX 75219
214.520.0555

Forte has very specific requirements for ActiveX controls. We found out the
hard way that Forte does not support the use of all ActiveX controls.
Here is some information I received from Mark Cooper at Forte:
With a bit more digging I found that ActiveX controls are required to adhere
to two restrictions in the Forte environment. ActiveX controls are required
to provide a single interface (and cannot include irrelevant nested
interfaces) and must implement Apartment model threading (technote 11344).
You can use the OLE-Com Object Viewer to determine whether a control
fulfills both of these requirements.
Hope this helps. As I understand it, a future release (3G or 4???) will have
better support of ActiveX controls. But in the mean time you are stuck to
these limitations.
Regards,
Jason Carpenter
CSC Consulting & Systems Integration
[email protected]
3811 Turtle Creek Blvd.
20th Floor
Dallas, TX 75219
214.520.0555

ActiveX problem again!

Hi, all
previously I asked a question about "control can not be loaded" problem with MS treeview. by registering mscomctl.ocx, this problem's solved. But now I met another problem:
I made an executable with installer, and installed it on another clean computer. Even I did the registering(that computer has the ocx installed), the control still can not be loaded. I did the registering before the installation and restarted the computer before I ran the program.
Anyone can tell me what I should do?
Thanks a lot.

Hi,
You also have to register nicont.dll and nicontdt.dll. (At least, this
helped at my system.) This should be done by the installer, but it is not.
It is best to make an .exe from a vi that registers these dll's. Then you
can execute this exe automatically after the installer is finished.
Regards,
Wiebe.
"inhaler" wrote in message
news:[email protected]..
> Hi, all
>
> previously I asked a question about "control can not be loaded"
> problem with MS treeview. by registering mscomctl.ocx, this problem's
> solved. But now I met another problem:
>
> I made an executable with installer, and installed it on another clean
> computer. Even I did the registering(that computer has the ocx
> installed), the cont
rol still can not be loaded. I did the registering
> before the installation and restarted the computer before I ran the
> program.
>
> Anyone can tell me what I should do?
>
> Thanks a lot.

Word 2013 ActiveX problem

When I try to add an ActiveX control to a word document I get the error message:
The program used to create this object is Forms.
That program is either not installed on your computer or is not responding.
To edit this object, install Forms or ensure that any dialog boxes in Forms are closed.
FM20.dll is present in c:\windows\syswow64\
Reference to Microsoft Forms 2.0 Object Library is set.
ActiveX control works ok in Excel 2013.

Hi,
Thanks for your question. We have noticed that Macro/Active X control might not be working after installing the latest Office updates.
We have submitted this issue through our internal channel, and Microsoft is working on this. We'll let you know if we have any updates on this.
For now, please try the workaround that shared by our MVP <Hans Vogelaar> in
above link, and see if it works for you:
"Quit all Office applications.
Start Windows Explorer.
Select the system drive (usually C:).
Use the Search box to search for *.exd
Delete all found files."
Thank you for your understanding and patience.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

ActiveX problem after Reader upgrade

(apologies up front that I am new to this)
I have a four year old Dell PC running on XP SP3 (with Kaspersky 2011 and I think IE7). In response to an upgrade pop-up (which has been popping up every time I switch on for ages), I upgraded to the latest Adobe Reader. But now Flash doesn't work. I uninstalled then reinstalled using tools downloaded from the Adobe site, but I get a message after download saying "ActiveX Control for Flash Player could not be registered".
I have looked at some Forums and tried the suggested basics incl changing the IE Internet Options to medium security and disabling Kaspersky. But I still get the same message. I haven't been brave enough to try the ACL tool or anything that requires a back-up.
I can't see any Flash-enabled web content, which is pretty frustrating. And the kids are moaning that they can't watch YouTube (so there is a silver lining...!)
Does anybody have any ideas, please? Will switching to Firefox or Google Chrome help? Are there any downloadable software fixes?
Many thanks indeed.
Adrian
Tunbridge Wells, UK

What is your operating system? Reader XI version?
What exactly means "cannot"?

I can´t open my place at Intelbras by Mozila, it is not compatible, Activex problems...What may I do ?

I have worked with mozila firefox last 10 years.
Now i need work inside Intelbrás, at my space, to see my security cams system, and i can´t because has no compatibility.
so, i am using both Mozilla, and, IExplorer to see my remote control cameras
using Internet Explorer I just Habilie the Activex Control to acess my Intelbras space, before using the first time, i just desabilite the Activex controls, so IE accept normally the site.
Please help me to use Mozzila there, I don´t wan´t to work with IE
thks
Aleida

ActiveX is an Internet Explorer plugin system and does not work on other browsers such as Firefox. If the site requires ActiveX you will need to use Internet Explorer to use that site.

Datasocket ActiveX problem

I have an issue with the standard Datasocket VI's that come with Labview 8.2.1. Datasocket has an ActiveX component which should theoretically act the same as the canned VI's. I wanted to test the ActiveX functionality so that a fellow programmer could pass/receive data from my Labview program into his Visual C++ program. I will use the Datasocket Read/Write vi's and he could use the ActiveX components in C++.
I'm using the 'DS 3D Graph Reader.vi' and 'DS 3D Graph Writer.vi' from the examples as the base to test out ActiveX. I spent most of a day trying to get the reader portion to read the standard output of the Writer. I kept ending up with an array of the correct size with all zeros instead of the data. If I switched the reader back to the canned vi, it worked fine. No matter how I configured the ActiveX settings, I could not read the data.
Then I modified the Writer to use ActiveX to write data to the server instead of the Datasocket Write vi. Once I did this, I can read the data using either ActiveX or the standard Datasocket Read vi.
What I can't figure out is why the write portion makes a difference. This is my first time using Datasocket, but not ActiveX, which I've used to communicate with Windows components and devices many times in the past. The documentation included with the Datasocket ActiveX is pretty sketchy and missing several settings which are available (the Sync settings and the Buffered settings).
I've attached the vi's I modified to try out. Make sure to start the Writer first.
Thanks in advance!
Tom
Attachments:
DS 3D Graph Reader.vi ‏54 KB
DS 3D Graph Writer.vi ‏49 KB

Thanks, guys.
No joy, unfortunately.
I tried 'Datasocket Open' outside the loop and then closing it when quitting, but I'm still having the same issue: an ActiveX read cannot see the data, but a DS Read can.
I've attached the new 'DS 3D Graph Writer' vi and the 2 subvi's, though Labview should have been able to find them - they're from the standard example vi.
I don't see how to configure the Datasocket Server. Diagnostics lets me see the 3dgraph folder with the 'data' item in it, but not modify it's characteristics in any way.
Any other suggestions?
Attachments:
DS 3D Graph Writer.vi ‏52 KB
create waveform.vi ‏30 KB
Launch DS Server if Local URL.vi ‏30 KB

Is it an ACTIVEX problem?

I have a Flash movie on a Dreamweaver page. I'm assuming it's
the only way to publish a FLASH site. I'm not a coder by any means
and am having diffuculty with this. The page loads without the
movie.
I have uploaded the html page as index.html. I have also
uploaded the AC_RunActiveContent.js page.
My site is the following: wwww.speakrecordings.com
Is there something I'm doing wrong and a fairly simple way to
fix it? I have 3 sites I have to upload, all FLASH. Will I be
running into this problem each time?
I'd appreciate any and all help, THANK YOU!

ealdahondo wrote:
> I have uploaded the html page as index.html. I have also
uploaded the
> AC_RunActiveContent.js page.
> My site is the following: wwww.speakrecordings.com
The problem is that the link to AC_RunActiveContent.js is
incorrect, but perhpas this was caused by how you set up your site.
The link is:
<script src="../Scripts/AC_RunActiveContent.js"
type="text/javascript"></script>
When accessed via your home page, it is trying to go up a
level, and you cannot go up a level when your already at the top
level of the site.
This issue could be due to have you have your site set up.
Many web hosts give you FTP access to a root folder and then within
that folder is a folder that contains all the publicly available
files, that is where your home page is located (index.html?). If
you set up your site to point to the parent folder of the publicly
available files (one level up from the web files), then Dreamweaver
will create the folder that the AC_RunActiveContent.js file is
stored (in a Scripts folder). If you were to drag that Scripts
folder into the web folder, then Dreamweaver should ask you to
update the paths, have it do so, then upload the Scripts folder in
the web folder. The end result should have AC_RunActiveContent.js
at the folowing location, which it isn't currently at:
http://www.speakrecordings.com/scripts/AC_RunActiveContent.js
Please note that if you add another Flash movie to your page,
then Dreamweaver will recreate the Scripts folder at the root of
the site defined within Dreamweaver, and you'll either have to
update the paths or redo the steps above.
You can prevent the issue by having two sites defined, one
that points to the root folder of your ftp account, and one that
points to the web folder, and that second site is the one that you
should do all of your editing of your web pages.
Danilo Celic
|
http://blog.extensioneering.com/
| WebAssist Extensioneer
| Adobe Community Expert

ActiveX problem

Similar Messages

Maybe you are looking for