Activing Mighty Mouse "Zoom using" and "Scrolling options" prefs

According to:
http://www.apple.com/mightymouse/software.html
there should be "Zoom using scroll ball... " and "Scrolling options" popups in Mouse preferences, but I only see:
I'm running 10.4.7 and ran the Mouse software installer. How do I get these additional options to appear?
PowerBook G4/1.67 GHz Mac OS X (10.4.7) 7200rpm 100 GB HD, 2 GB RAM

The 10.4.8 update adds the scroll-wheel zooming
feature for all mice.
Really? It hadn't done so on my Mac. I ran the usual privileges, etc., routines beforehand. I can't even recall it being mentioned in the release notes or their detailed specs. http://docs.info.apple.com/article.html?artnum=304200
Anway, 10.4.8 didn't affect a change to the keyboard/mouse pref on my PPC so I used Pacifist to get at the additional MM features.

Similar Messages

Mouse Control Panel Looses scroll options and multi-button options

Hello-
I just bought the new Magic Mouse. Once it is paired with my bluetooth the mouse works fine but the Mouse control panel looses the secondary button and scroll options. Mouse will not scroll normally or momentum scrolling. As well the Bluetooth control pane does not show mouse battery level reading, and there is no Mouse name. What's happening here??
G5 PowerMac with 10.5.8 and normal wired extended keyboard.
Thanks,
Kevin

Hi,
Good to hear it's Ok and hopefully all the malware has been removed.
All the best,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Difference between Apple Mighty Mouse MB112LL/A and MB112LL/B?

What's the difference between the wired Apple Mighty Mouse MB112LL/A and MB112LL/B?

I did a search for "MB112LL/A" on the Apple support website:
[http://support.apple.com/kb/index?page=search&product=&q=MB112LL/A]
As you can see, it comes up in several pages giving information about the Mac Mini and MacBook, where it's given as the part number for the Apple Mouse in the "Options" section, under "Configure-To-Order." A search for MB112LL/B turns up no results of this sort.
Furthermore, the Apple Online Store sells the /B part but not the /A part. So it seems logical to assume that the /A is offered only as a CTO part, and the /B is a standalone part.
Like I said, I'm not sure that the difference is the configure-to-order status. It's just an educated guess.

To offer integrated forms, so like Jotform, there are templates that can be used and upload options to FTP client as well as other built in widgets.

To offer integrated forms, so like Jotform, there are templates that can be used and upload options to FTP client as well as other built in widgets.

What you need is merged help.
You generate a parent and all the child projects. You always install the parent and then whichever child projects you require. The TOC, search and index automatically adjust. See the pages on my site.
Note though that many people take another view to your Product Development. Show all the help and then people see information about something and realise they need it!
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

My adobe is now making my mouse zoom instead of scroll. This was working perfectly yesterday. How do I change it back

My adobe is now making my mouse zoom instead of scroll. This was working perfectly yesterday. How do I change it back?

What is "My Adobe"? Did you try to reboot your system?

Keyboard and the magic mouse cannot using and pairing in win7

keyboard and the magic mouse cannot using and pairing in win7
already install boot camp in win7 but can using in OSX

thanks I tried re installing the drivers (which were working fine before this windows update) but unfortunately it did not work. I can not access my bluetooth settings at al in windows yet it works fine on the mac side of things (I'm using them to type this)

Best Practice regarding using and implementing the pref.txt file

Hi All,
I would like to start a post regarding what is Best Practice in using and implementing the pref.txt file. We have reached a stage where we are about to go live with Discoverer Viewer, and I am interested to know what others have encountered or done to with their pref.txt file and viewer look and feel..
Have any of you been able to add additional lines into the file, please share ;-)
Look forward to your replies.
Lance

Hi Lance
Wow, what a question and the simple answer is - it depends. It depends on whether you want to do the query predictor, whether you want to increase the timeouts for users and lists of values, whether you want to have the Plus available items and Selected items panes displayed by default, and so on.
Typically, most organizations go with the defaults with the exception that you might want to consider turning off the query predictor. That predictor is usually a pain in the neck and most companies turn it off, thus increasing query performance.
Do you have a copy of my Discoverer 10g Handbook? If so, take a look at pages 785 to 799 where I discuss in detail all of the preferences and their impact.
I hope this helps
Best wishes
Michael Armstrong-Smith
URL: http://learndiscoverer.com
Blog: http://learndiscoverer.blogspot.com

Can bluetooth mighty mouse be used with windows XP?

i installed XP with bootcamp, and my mighty mouse worked the install of windows and everything, until i actuallly got into windows... any ideas?

It works fine. After setup (use 0000 as pas code) the bluetooth device, you can use it. Upon logging in to the XP, just click once using mouse and then mouse will start working.
However, not all the functions for mighty mouse (like horizontal scrolling, side button etc) works in WinXp side.

Zoom using Command&Scroll Wheel suddenly not working

I was always able to zoom in and out by holding Command and using the mouse scroll ball. Now suddenly that does not work (I have to use CmdOption+or -).
I can't see anything in SysPref that would affect this.
Anyone have any idea?

No, but you're a genius and I'm an idiot. At the bottom of that screen is a "Zoom using scroll bar while holding -- key" check box that I must have unchecked at some point. I guess I wasn't really all over Preferences after all. Thanks for pointing me in the right direction.

Mighty Mouse (wireless) will only scroll up & not down

Has anyone come across an issue like this, I think it is hardware, but thought I would ask around first?
I tried using our 2nd wireless mighty mouse that is paired with the iMac and that worked correctly (scroll both up and down) when paired with my MacBook Pro. However, when I re-paired the mouse in question, it still only scrolls up.
Any thoughts are greatly appreciated.
Thank you

Hi bbwc-
Greetings and welcome to the Apple boards
You must clean said mouse: How to clean your Mighty Mouse
Luck-
-DaddyPaycheck

Mighty Mouse/ OS Tiger and Apple Studio Display

Not really sure that this topic should go here or in the studio area, but here goes. A few months back I updated my G5 to apple OS X 10.4.x. Up until that point, I had a USB mightly mouse plugged into my 17" apple studio display and could restart my system with no issues.
After updating to 10.4.x, when I boot my system, the USB mightly mouse acts only as a USB mouse and is very sensitive to movement. When I move the mouse a small amount, the point zips across the entire screen.
Once the system is up - if I unplug the mouse from the display and replug it in, then it works correctly and is not sensitive - that is, it acts like it should with the settings I have setup for "speed" in the control panel.
I have searched high and low for others with the same issue and have come up empty. Anyone with any ideas?
Thanks
Brian

To clarify, upon restarting, the system sees the mouse as a two button USB mouse. Once the system is up, when I unplug the mouse and plug it bak in, the keyboard/mouse control panel, switches to reflect that this is a USB mightly mouse with all the various options.
This same behavior occurs when I use the USB port on the front of the G5's case.
Currently under the System Information ( apple in the upper left corner of the screen ), the system lists the mouse as an Apple Opticl Mouse, version 1.08
Thanks

Windows 7 and Wireless Mighty Mouse, Wireless Keyboard and sound problem

Hi,
I just installed Windows 7 x64 Ultimate on my iMac 24" white ( OS X Leopard 10.5 ). Surprisingly, it installed without any problems. The only problems I have now are the Wireless Mighty Mouse and the Wireless Keyboard ( alu ).
After I installed Windows I inserted the Leopard Instal DVD and installed Boot Camp. I got a message right away saying that: "This program has known compatibility issues...". I clicked Run program and continued. Soon I got the same warning, but this time not for Boot Camp, but Intel Chipset Device Software. I clicked Run program yet again and it continued installing. Then I got a different warning: "Service KeyAgent' failed to start. Verify that you have sufficient privileges to start system services." I clicked Ignore and installation continued. I got another "Service Mac HAL' failed to start. Verify that you have sufficient privileges to start system services." warning, clicked Ignore again and after that it finished soon and I restarted the computer.
When I came back into Windows there was no Apple folder anywhere or any sign that I have just installed Boot Camp ( should there be? )
I installed Boot Camp Update 2.1 for Windows XP ( because Vista x64 version wouldn't start ) and basically I got the same warnings I did when I installed Boot Camp from the Leopard DVD ( described above ). I also tried to instal Boot Camp Update 2.2 for Windows, but it didn't start. I also downloaded Bluetooth Update 1.0, but all I got was a message saying: "This update is not intended for this computer and will not be installed.".
There is also no sound.
This is basically it, I really hope some of you who run Windows 7 with wireless keyboards and mice can help me, because I desperately need this to work ( I use a Windows only program for school ).
PS. I have a 2007 iMac 24" white and while it is not on the we're-not-supporting-that list for the infamous Windows 7 Boot Camp update, all other iMacs from its generation are. Any ideas?

Found a solution for the "Boot Camp x64 is unsupported on this computer model" message. Here is the link: http://www.techulous.com/hardware/how-to-apple-boot-camp-64-bit-for-windows-7-on -unsupported-macs.html
Everything works ( for ) now. Yay!

(Mighty) Mouse with Windows7 and BootCamp

Hi,
I am trying to get my Mighty Mouse running on Windows7 using Bootcamp. I have read several threads but it still does not work!
What is more problematic: I am using my old USB mouse from my Quicksilver mac (a "Pro Mouse" - transparent look), and even here I cannot manage to get the right click enabled properly...
When I click on the "Add Bluetooth device" button in the system settings, the mighty mouse is found, but the installation is not finished and I am not able to right click on it (because of the problems with the existing USB mouse), in order to change some settings of it ... if that would be possible..
Any ideas?
PS:
iMac (2007), Snow Leopard, BootCamp says version 4.0 (from Windows System Control)

Found some hint in the web that fixed my issue:
http://maclord.ozarweb.com/mevzu/resolved-apple-magic-mouse-problem-on-windows/
It seems as if I really had to remove the mouse in MacOS from the bluetooth device list.

AVRCP Buetooth issues with Mighty Mouse interference (?) and SONY CMT-HX5BT

Hello:
Just got a SONY Bluetooth enabled mini stereo system (CMT-HX5BT). Knowing my iMac with OS X 10.4 doesn't support AVRCP Bluetooth (another issue entirely!) I downloaded the Softstick Audio Gateway for Mac. This will allow me to play my iTunes music on the SONY stereo. However, when the Mighty Mouse is switched on, the playback is exceptionally fragmented and almost non-existent except very short bursts. When the MM is switched off everything works wonderfully.
I am hoping that whomever is responsible for BT in general did think that BT Mice would be used at the same time as stereos/headphones. Hopefully this is an issue with something other than BT in general such as Softstick, the MM, or OS X. Any ideas?
Does anyone think upgrading to Leopard, and using the operating system's built -in AVRCP support be better than a third party application? Although I haven't found conclusive proof that OS X 10.5 actually has AVRCP support either. Does this mean Logitech will be getting my business as I switch back to a regular radio frequency cordless mouse?
Thanks for any suggestions.

Thanks for your answer, no problem... it's OK
why don't you try with OS X 10.5... I guess the A2DP is built in Leopard (natively)
Today I saw the CMT-HX5BT at the local shop, they obviously have no clue about its functionality with a Mac, but that mini hifi looks great and it's not even that expensive...
maybe I should buy it anyway...

Zoom used to Scroll down Screen Shot

Can you use the Zoom effect to scroll down a screen shot? And
how?

Hi SM6601
As far as my knowledge extends, a Zoom Area will only magnify
a portion of the screen as displayed. However, theoretically, and I
have not tested this, If you place a Zoom Area over a FMR then that
scrolling portion of the SWF should be displayed.
Give it a try and let me know please.

Activing Mighty Mouse "Zoom using" and "Scrolling options" prefs

Similar Messages

Maybe you are looking for