Activites after source system refresh

Hi all,
we made source system refresh recently.
When iam running INIT I am not able to get the data ,but in rsa3 data it is available
Now  I am not able to retrive the data from source system for SD data sources like 2LIS_02_ITM.
Can any one tell me what type of activities i need to do after source system refresh for LO data sources.
Thank
Pruthvi

Hi Pruthvi,
As you mentioned about refresh, it would be a system other than Production system.
Delta Loads:
1. Whenever a refresh happens from the production, the delta pointers are disturbed.
2. You need to re initialize the delta pointer for the DS you mentioned.
3. If it is for the testing purpose of the Delta functionality, you may intialize the delta pointer 1st and then ask for postings of data in the ECC side.
4. Once the postings are done, you would see data in Delta Queue in RSA7 in source system.
5. Now run the Delta InfoPackage so as to fetch this data from the Delta Q of SS to the BW system.
Full Loads
1. If you are expecting a full load (Historical data), you need to first fill the Setup tables (in Background only) in the SS.
2. Once the Setup table fill job is completed in SS, you may execute a Full InfoPackage in order to get this full load.
Let me know if this helps..
-Bhushan.

Similar Messages

  • Source System Refresh with BW system Connected

    Hi SDN Gurus,
    We are doing a source system refresh for CRM 5.0 Production to CRM Quality.My question is the source system of the BW system will be Changed and the BW Quality will have old data. What are the Post Activities which needs to be done in BW 7.0 system after the CRM system is refreshed.
    So that the Quality BW system which will be now Production can have fresh data from Production System of CRM.
    Thanks and Regards
    Vishwanath

    Hi Ravi,
    Thanks for the same.
    I have another issue. My CRM Reports BI 7.0 is being displayed in Enterprise Portal, We have defined variables for user entry and they can select the values from the selection screen of the variable.
    Let's say we have 80 thousand records and we have variable let's say Client Name, where the user wants to select his client name and display records for that client. The Screen shows him only 72 rows of data i.e nearly 1000 records of Client Name. But we have nearly 20000 client names, and only 1000 client names are being displayed to select from. If he does a filter (eg: A, it displays all the names starting with A, but when we say B or C*, though the data is available in the ODS table, those client name is not displayed in the Screen.
    My question is how to Display all the Values or atleast when he gives A* or B* or Z* it should display those Names, so that he can see the records for those client Name.
    I have done all sorts of R&D to achieve this but in Vain.
    Please help me to sort this.
    Thanks and Regards
    Vishwanath

  • No Idocs were getting generated after the system Refresh

    Hello Experts,
    Recently my Sand box system has been refreshed with the Development system. (Its a system refresh and hence all the objects were also copied like Development).
    After the refresh, we have performed the below activities --
    BDLS to change the logical system
    Maintained the LS in WE20
    Partner Profiles from WE21 with proper settings with respect to the new logical system name. (Sand box).
    RFC to myself source system and to the Flat File.
    While executing a test load from Flat File the system is not able to generate any IDOCS in the system and failing with
    "No Idocs generated; file system
    Diagnosis
    No IDocs have been created. With file systems as source systems, the IDocs are created in BI. As this did not happen, it is probable that there was a short dump in BI.
    I dont see any short dumps in ST22 for this load and also any logs in SM21.
    Any idea why the system is not able to generate IDOCS in the system?
    We are planning to connect R/3 sandbox to BI sandbox once the Flat file load is running fine.
    Thanks for your answers.
    Raman

    Hi ,
              Hi
    BD87 Update Idocs manually.
    1. When you look in the Monitor screen for the first time on a day you mostly will see some Loads that have yellow traffic lights. When you click on the lowest line of the Load (with the time of Load start) you will get the next popup screen:
    2. Here you can click on the "Yes" button. The Load specification window (right side of the screen) will now be filled with data.
    3. You can now start the manual processing of the IDocs. You go to the "Details" tabpage of the right window. You right click on the line with the red traffic light stating "Request IDoc : IDoc ready to be transferred to application" on the "Details" tab page of the Load. In the option menu that appears choose the option "Update manually in OLTP" (click it).
    4. You will get to the next screen (which is in fact a transaction in the source system (SAP R/3) where you can update the IDoc that is send by the source system)
    5. Now click the "Excecute" button on the left of the screen (or press the F8 button on your keyboard). You will get to the next screen:
    6. This states that the IDoc has been passed through to BW. You return to BW by clicking the "Back" button (or pressing the F3 button on your keyboard) twice. After the first time you will see the previous screen and after that the Monitor screen again.
    7. You will now see that the Status of the Load has turned to yellow or green. When it is yellow you will have to wait a little time (the execution of the Load in BW is still running) and by clicking "Refresh Details" button on the left upper side of the screen (or pressing the F8 button on your keyboard) you will see the Load turn green.
    Regards,
    Rahul.

  • DS-BW:Data load called from BW failed after Source System program_id change

    Hi,
    In my BW 7.0 instance I have Data Services 3.2 as source system.
    Some time ago I have changed instance of Data Services I am connecting to - I just changed PROGRAM_ID in RFC connection parameters for that source system.
    Since that time when I am trying to execute infopackage to call a job I am getting following error:
         OCI call <OCISessionBegin> for connection <xxxxxxx> failed: <ORA-01017: inv
    where <xxxxxx> is Oracle database connection name for Data Services instance I connected originally.
    What can be reason for that?
    Regards,
    ak

    In Data Services Server Manager on DS box there were configurations for job server I connected originally and for the other job server. After removing original config it works fine.
    ak

  • Extraction failing after source system and client copy

    Hi all,
    We refreshed our source QA system with a copy of production.  And basically tried to "restore" the connection from our BW QA system.  Some of the datasources can be extracted from BW, others fail with an error of "No transfer structure is available for InfoSource 0COSTCENTER_ATTR in the source system".
    Trying to do the same thing with RSA3 in the source system, works fine.
    The strange thing is it works for some objects but not others.
    here's what we did:
    1. System copy from R3 Prod to R3 QA
    2. Client copy with R3 QA client 300 -> 200
    3. Restore connectivity in BW QA to the R3 QA system (Using RSA1 -> Source  System -> Restore)
    4. Now some objects can be extracted in BW, others fail as I mentioned above.
    I have regenerated the transfer structures in BW and R3. 
    All of these objects that don't work seem to work in RSA3 on the R3 system but not in RSA1 on BW.
    All the SAP documentation is geared to copying the R3 source system and then restoring connectivity between BW and R3.  I don't think any of it involves copying the client in the R3 source system - which might be causing our problems.
    We are using an SAP delivered PDF and note 886102 mainly for direction.
    SAP PDF is "How to... System Copy in SAP Business Intelligence System Landscapes".
    Does anyone have any ideas?
    Thanks,
    Kevin

    Hi,
    can you isolate somehow the kind of DataSource which works and those who don't?
    Master data / transactional or client dependent and not, delta or full....
    To which R/3 client is your BW connected? when you succeed loading the data, is it coming from the right client?
    RSA3: do you run it specifying your BW client in the target sys field? does it make a difference if yes or if not?
    Are your RFC connections and partner profiles all right?
    Check some IDOCs sent by BW received in R/3 and vice-versa (RSSEND, RSINFO, RSRQST..). Load a hierarchy (via IDOC)... verify that your IDOC have the correct partner settings....
    let us know
    Olivier.
    Message was edited by:
            Olivier Cora

  • DTP error after QA system refresh

    Hello Experts,
    Whenever we refresh our QA system[with Production data], the DTP's and the 7.0 datasources always point to the Production R3 system and not the QA R3 system. Is there a program available to correct this like we have in BW 3.x?
    Thanks
    Arvind

    Hi,
    Your basis should change the source system settings, connect to your Q r/3 but not P r/3. How about change source system connection, change IP to Q r/3 and then replicate & reactivate all datasources?
    Also you can have a look at BDLS:
    BDLS
    Re: Question on BDLS
    Regards,
    Frank

  • Lost Transport Import History after the system refresh

    Hi,
    We forgot to take the backup of the TPALOG table before the system refresh. We refreshed our testing system from production system. Right now we donu2019t have the old import history for the testing system. We played with TPALOG table and TPALOGHDR to synchronize TPALOG table with ALOG*  files. But we are not able to do that. I remember we had synchronized the TPALOG table with ALOG* files in the past. Please advise for any function/program to achieve this. Thanks.
    Thanks.
    Raj.

    Hello Raj,
    The mechanism behind the import history is that STMS will look in table TPALOGHDR to check if the time frame for which the import history is called, is between STARTTIME and ENDTIME.
    If it is, it will use the entries in table TPALOG.
    If not, it will read the ALOGxxxx files on /usr/sap/trans/log and update table TPALOG.
    Modifying the ENDTIME in TPALOGHDR will force reading the ALOG files again and will update the internal table TPALOG. In most cases,using the first date you find in the ALOG file that covers the missing transport.
    To reduce the possibility of competing accesses to the action log you can select a system-specific name. For this purpose, set the tp parameter ALLLOG in the STMS transport tool as global and with value:
    ALLLOG = ALOG$(syear)$(yweek).$(system)
    This will create system dependant ALOG files like, ALOG0318.D01
    It should be noted that : The import history in TMS is only available for periods after the last copy of a system. The reason for this is, that TMS needs some information about the ALOG files which are stored
    in the database. During a database copy, this information is destroyed and there is no possibility to restore this data.
    Best Regards
    Niraj

  • Restore transfer rules after source system deletion

    Hello,
    due to several reasons I had to cut source system assignment.
    The source system is now new connected to BW.
    My transfer rules and datasources are lost.
    Is there a programm, t-code, ....available to restore that stuff?
    Points will be assigned.
    Best regards.
    Pascal

    Hello,
    Just go to transaction rsa13 right-click over your source system and choose "Restore"
    Diogo.

  • HP2000 issues after doing system REFRESH and everytime it does UPDATES

    Every time I have updates on my laptop HP 2000 bf69wm I have major issues.  It happened again today I did the updates and then I cannot access anything on the internet.  I get the spinning circle of death and no pages load.  I did a system REFRESH which states it will not affect your personal stuff.  Well great my pics are all intact however my Windows Office programs are GONE!!! I had to pay to put that on my computer and now they are gone!!!  I got this laptop as a Christmas gift from my parents because my Toshiba is falling apart literally it is duct taped together.  However the Toshiba still has less issues than this laptop does and it is brand new.  So now do I honestly have to pay for Windows office again.  It was a one time download so I cannot just download it again and I need it for my college classes.  It is awesome to have a brand new laptop that only works when it feels like it and gives me more stress than it helps.  Can someone please help me on what the deal is with this and also why I keep getting a message saying my usage is at 100%?  I can be in my email and it tells me I am running at too much  blah blah blah.  So what is the purpose of the laptop if I cannot use it?  If I had known it was this bad I would have returned it but too late now.  PLEASE HELP!?!?!?!?!?

    Hello xopixiegirlox,
    Please call in and speak to a representative. 
    If you live in the US, contact HP Here.
     If you are in another part of the world, start Here.
    Please let me know if the rep was able to take care of your issues. 
    Good luck!
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Source system refresh after initial download

    Hi Group,
         i finished my initial download of BP's, Products, Pricing and Org structure from R3 to CRM. now Delta load is active. my client is planning on doing Refresh on R3 system this week. what will happen to CRM after R3 refresh? does CRM system also need to be refreshed? what happens to delta load that is active before refresh? please let me know the consequenses???

    Hi Anu
    The consequnces depend on the way you refresh your data.
    If you delete all the data programatically in R/3 then the delta will not be trigerred.
    But you need to do the Initial download again as the mapping data between the CRM and R/3 might be lost and might not be correct even if it is retained.
    Regards
    Jay.

  • Pre-activities in source system before export

    Hello  Experts,
    Please share reason why following activities needs to be done before export:-
    1) No switching of operating modes takes place while a system is being copied
    2)  No upgrade-prepare is performed
    3) No incremental conversion is in progress
    4) No canceled or pending update requests should be in the system.
    Thanks
    S.BASIS

    Hi
    Refer below for details;
    When operation modes are switched (based on the definition from its time table), the work processes (WP) are redistributed in the active instance.
    This means, when WP used as a dialog process (DIA), it can be switched for use as a background process  (BGD) or vice-versa, i.e. depends on the WP type defined in Operation mode.
    While switching Ops Mode, WP may not be switched immediately instead WP is set to be switched when next possible ( if WP is busy in its current status, with either DIA or BGD) but this switch is more risk and or possible to get into error mode while system (means, WP) is busy with its export or upgrade activity. So SAP advise to deactivate Ops. Mode switch.
    Best Regards
    Swami

  • Source System Problem after System Refresh

    Hi,
    We have R/3 4.7 Test source system created in our SCM 2007 Test System. The source system check was OK.
    The R3 Test system was refreshed with Production data few days back and now my source system is not working. When i perform Source System check it says:
    BI unknown in source system
    BI IDoc type ZSSB006 is not the same as source system IDoc type
    I performed following steps in R3 Test system after its system refresh:
    1. Created logcal system and created RFC.
    2. Created port in trx we21.
    3. Created partner profile in trx we20.
    4. For the outbound parameter RSSEND, I had to create idoc type that should be same as in my SCM system i.e. ZSSB006.
    5. Created idoc type using trx we30 as a copy of RSSEND and added entry in table EDIMSG. Now, i could also create outbound parameter RSSEND with idoc type ZSSB006.
    After performing the above steps i also replicated the datasources for the R3 Test source system, but its still showing above error.
    I also checked the RSBASIDOC table in SCM test system. It has correct entry for my source system. But there is no such entry in RSBASIDOC table in the R3 test system.
    Someone pls help me.
    Regards,
    Chintan

    Hi Chintan,
    Can you please check IDOC in your Target system. It should be the same type. Better you do the Partner profile steps.
    Also please check have correctly created the idoc in Inbound or Outbound.
    Consider the case like if its exist in BW as Out bound then its connected to Inbound IDOC of R/3 and vice a versa.
    Please elaborate your refresh activites. Normally IDOC setting never get changed in you refresh activites.
    Just check your BW system patch level and search for Notes.
    Regards,
    Mahesh

  • Source System Problem after system refresh in RSA1 trx

    Hi,
    We have R/3 4.7 Test source system created in our SCM 2007 Test System. The source system check was OK.
    The R3 Test system was refreshed with Production data few days back and now my source system is not working. When i perform Source System check it says:
    BI unknown in source system
    BI IDoc type ZSSB006 is not the same as source system IDoc type
    I performed following steps in R3 Test system after its system refresh:
    1. Created logcal system and created RFC.
    2. Created port in trx we21.
    3. Created partner profile in trx we20.
    4. For the outbound parameter RSSEND, I had to create idoc type that should be same as in my SCM system i.e. ZSSB006.
    5. Created idoc type using trx we30 as a copy of RSSEND and added entry in table EDIMSG. Now, i could also create outbound parameter RSSEND with idoc type ZSSB006.
    After performing the above steps i also replicated the datasources for the R3 Test source system, but its still showing above error.
    I also checked the RSBASIDOC table in SCM test system. It has correct entry for my source system. But there is no such entry in RSBASIDOC table in the R3 test system.
    Someone pls help me.
    Regards,
    Chintan

    Hi
           Need to restore the All Dalaload connection settings after refresh the system which either R/3 or SCM.
    RSA1 -> select the Source system -> Right click -> Restore , It'll ask the connecon paramters like RFC , method of activations. Then check the connection test of the Source system .
    Check the the note for further  info...
    Note 886102 - System Landscape Copy for SAP BW and NW BI
    Hope halp you...
    Regards,
    Sureshram

  • Activitis in satellite Systems after Refresh

    Dears,
    In our landscape we have Three system in which Quality system is refreshed every third month with Production system.Now issue is we have completed solman implementation in this landscape with these three systems as satellaite and system refresh needs to be done next week.
    Now I want to know what activities i should in quality so that it could work properly after refresh in solman like in system montoring,service desk and all activities.
    Users and RFC's will be saved by exporting them.Now except it what should be done.
    Shivam

    Our experience was that there were usually problems with the connections with Solution Manager, even if they were saved and restored.  The best approach we found was after the system refresh, we would delete the generated RFC's and user-id's in the SolMan system and in the QA system.  We would also delete the entries for the systems in transaction SMT1.  Then, we would go back to transaction SMSY and regenerate the RFC connections.  Afterward, the configuration in STMS would be checked and redistributed across the transport domain.

  • Java Dispatcher Down but Server0 and SDM up after system refresh

    Hello,
    I have done system refresh from PRD to QAS of CRM system - dual stack.Once after the system refresh ABAP is up and running fine but Java is down (Only Dispatcher is down. Both SDM and Server0 are running fine).
    I have followed Note 609603 - Problems with Multiple NICs and SAP J2EE Engine and have given the correct host name but the no luck..
    std_dispatcher.out says the following error:
    Cannot attach to the Message Server. Can't open port [3925] on host [<Source Host Name>/Source IP Address].
    Could you please let me know if I need to do any changes in the Config tool?
    Thanks,
    Subbu

    HI,
    IN DB restore the hostname of java system stored in profiles would be your PRD.
    Go to Configtool in Edit mode -- cluster --> change the hostnames in Instance profile -- and under other files like bootstrap etc whereever you find PRD hostname.
    And otherwise for JAVA system you should use export/import option.
    Regards,
    Tajinder

Maybe you are looking for