Activities are getting queued in CBS

Activities are getting queued in CBS instead of being processed and we have request processing mode as ON, don't know why. Can anyone help?
Thanks in Advance.
Rajat

Hi,
Try to find out the log from the CBS GUI.
You may get some clue from there
AM

Similar Messages

Release activitis are not build in CBS, sending an empty archive

I have created an activity and released from the NWDS Development Configuration.
Now from the consolidation i have imported .Assembled and moved this to test but my changes are not moved to the test system.
Then i started to dig in to this issue and I found this log in consolidation CBS make details as below :
Analyze dabendencies to predecessor activities... started at 2008-05-12 23:30:36.618 GMT
            Analyzing predecessors in compartment "xxxxx.com_abc_1"
         No dabendencies to predecessor activities found.
         Analyze dabendencies to predecessor activities... finished at 2008-05-12 23:30:36.700 GMT and took 82 ms
          Analyze versions... started at 2008-05-12 23:30:36.700 GMT
          List Active Versions Rabort: "HTTP/1.1 207 Multi-Status" finished at 2008-05-12 23:30:36.879 GMT and took 179 ms
            < IGNORE > 'xxxxx.com/ab/test' DC
            < IGNORE > 'xxxxx.com/ab/test1 DC
            < IGNORE > 'xxxxx.com/ab/test2' DC
            < IGNORE > 'xxxxx.com/ab/test3' DC
        Analyze versions... finished at 2008-05-1223:30:36.889 GMT and took 189 ms
         Analyze activities... started at 2008-05-1223:30:36.889 GMT
            Loading component definitions
            Removing component "xxxxx.com/ab/test1" from request 1297. A component with this name has not yet
            been created or activated.
            Removing component "xxxxx.com/ab/test2" from request 1297. A component with this name has not yet
            been created or activated.
            Removing component "xxxxx.com/ab/test3" from request 1297. A component with this name has not yet
            been created or activated.
            No components to be build in compartment " xxxxx.com_abc_1"
           Analyze activities... finished at 2008-05-12 23:30:36.917 GMT and took 28 ms
           Calculate all combinations of components and variants to be built...
           ===== Pre-Processing ===== finished at 2008-05-12 23:30:36
Please help me , I am badly stuck here.
Thanks in advnace.
Peter

We have the same issue and are currently troubleshooting. Here are some related threads I have found.
Automatic Deployment in NWDI not working
Re: SDM deploy not needed'
CBS build not needed
SAP Notes:
793935
Our NWDI is at a lower SPS level than our deploy-to systems. I hope that is not our issue...

Activation Requests are in Queue

Hi Experts,
I had checked-in an activity and it has been pushed for activation. But in the CBS, the activation request is queued for a day. So I again created an activity to activate both of these.
but they were not activated even the NWDI Server has been restarted. When I go to TCS/Deployer, I got upto now no information about the build request is available message.
Still these activities are in Queue. can anybody help me out to fix this issue?
Thnx and Regards
Prabhakaran

I believe this thread is closed, but I would like to share my solution for the benefit of others.
When I faced the same problem, I noticed that in Visual Admin the CBS service was stopped. I simply started it (Right Click > Start) and the queues got cleared.
Hope this helps.
Thanks,
Deepak

Email gets queued, but not sent until I login to my account on the server.

This is very strange. Let me explain.
1. Snow Leopard Server 10.6.2 running on an iMac.
2. I have the Mail Service running on the server. I can receive emails without problems.
3. Using my Snow Leopard Server email account, I attempt to send an email to another account (e.g. a mac.com email account).
4a. If I am actively logged into my Snow Leopard Server account *on the iMac* (e.g. via VNC, as long as my desktop is active), the email will arrive successfully. Here are the mail.log messages:
postfix/smtpd\[69030]: connect from \[External Host Address]
postfix/smtpd\[69030]: 942814AD55B: client=\[External Host Address], sasl_method=CRAM-MD5, sasl_username=MyUserName
postfix/cleanup\[69037]: 942814AD55B: message-id=<[email protected]e. com>
postfix/qmgr\[65313]: 942814AD55B: from=<[email protected]>, size=604, nrcpt=1 (queue active)
postfix/smtpd\[69040]: connect from localhost\[127.0.0.1]
postfix/smtpd\[69040]: C611B4AD568: client=localhost\[127.0.0.1]
postfix/cleanup\[69037]: C611B4AD568: message-id=<[email protected]e. com>
postfix/smtpd\[69040]: disconnect from localhost\[127.0.0.1]
postfix/qmgr\[65313]: C611B4AD568: from=<[email protected]>, size=1043, nrcpt=1 (queue active)
postfix/smtp\[69038]: 942814AD55B: to=<[email protected]>, relay=127.0.0.1\[127.0.0.1]:10024, delay=0.25, delays=0.1/0.01/0/0.14, dsn=2.0.0, status=sent (250 2.0.0 Ok: queued as C611B4AD568)
postfix/qmgr\[65313]: 942814AD55B: removed
postfix/smtp\[69042]: C611B4AD568: to=<[email protected]>, relay=smtp-mx005.mac.com\[17.148.17.5]:25, delay=0.48, delays=0/0.1/0.14/0.23, dsn=2.5.0, status=sent (250 2.5.0 Ok, envelope id [email protected])
postfix/qmgr\[65313]: C611B4AD568: removed
4b. If, however, my Snow Leopard Server account is either logged out, or even just "fast user switched" to the Login Window, the email gets queued, but not sent to the external email address. I get the following four messages in the mail.log file:
postfix/smtpd\[69030]: connect from \[External Host Address]
postfix/smtpd\[69030]: B5F574AD582: client=\[External Host Address], sasl_method=CRAM-MD5, sasl_username=MyUserName
postfix/cleanup\[69037]: B5F574AD582: message-id=<[email protected]e. com>
postfix/qmgr\[65313]: B5F574AD582: from=<[email protected]>, size=604, nrcpt=1 (queue active)
4c. The instant I login to my machine at home (e.g. via VNC), the email finishes processing. The below messages are logged, and my external email account receives the email:
postfix/smtpd\[69160]: connect from localhost\[127.0.0.1]
postfix/smtpd\[69160]: 20B244AD5B0: client=localhost\[127.0.0.1]
postfix/cleanup\[69037]: 20B244AD5B0: message-id=<[email protected]e. com>
postfix/smtpd\[69160]: disconnect from localhost\[127.0.0.1]
postfix/qmgr\[65313]: 20B244AD5B0: from=<[email protected]>, size=1043, nrcpt=1 (queue active)
postfix/smtp\[69038]: B5F574AD582: to=<[email protected]>, relay=127.0.0.1\[127.0.0.1]:10024, delay=74, delays=0.1/0/0/73, dsn=2.0.0, status=sent (250 2.0.0 Ok: queued as 20B244AD5B0)
postfix/qmgr\[65313]: B5F574AD582: removed
postfix/smtp\[69163]: 20B244AD5B0: to=<[email protected]>, relay=smtp-mx006.mac.com\[17.148.17.6]:25, delay=0.49, delays=0.09/0.01/0.15/0.25, dsn=2.5.0, status=sent (250 2.5.0 Ok, envelope id [email protected])
postfix/qmgr\[65313]: 20B244AD5B0: removed
I'm very much at a loss here. It's as if the act of logging out (or fast user switching to the Login Window) suspends some process that is required for my email to process. But .... why?
Any ideas? Any additional information I can provide to help figure this out? Fwiw, I used to run Tiger Server (never tried Leopard Server) and never had this problem.
Rob

Looks to me like the anti-virus scanner, amavis. The clue is the line:
postfix/smtp[69038]: 942814AD55B: to=<[email protected]>, relay=127.0.0.1\[127.0.0.1\]:10024, delay=0.25, delays=0.1/0.01/0/0.14, dsn=2.0.0, status=sent (250 2.0.0 Ok: queued as C611B4AD568)
where the 10024 is the default port that Amavis runs on. Postfix is configured to pass mail through this port, and queues the mail until Amavis is available.
My guess, therefore, is that Amavis is set to run under your account rather than under the system, which is why it only runs when you're logged in. Off hand I have no idea how you managed this and that makes it hard to work out how to fix it. I'd start by looking for org.amavis.amavisd.plist in /System/Library/LaunchDaemons, /Library/LaunchDaemons and ~/Library/LaunchDaemons (it should be in the former, but if its in the latter that could explain it.

Task activities not getting generated properly in BPEL

I am using the Jdev 11g TP3 (from OTN). Installation went through fine. However I observed a interesting issue with HumanTask/BPEL and I was wondering if someone faced similar such problems before, if so, how to rectify the issue. Here is the description of the issue:
1. Created a Empty SOA composite project
2. Dragged and dropped BPEL Process in the component palette. Designed a Asynchronous process.
3. Dragged and dropped a HumanTask. Did not expose as an composite. Designed a single approver workflow. In the project schema, choose the schema from BPEL input.
4. Wired BPEL to HumanTAsk
5. In the BPEL flow, I dragged the HumanTask to the flow. Everything appears to be correct. I clicked on "Ok" after associating with BPEL variable.
Now when I examine the BPEL flow, a scope before the BPEL switch is empty. There are no BPEL activities generated. This is a very simple case of BPEL and HumanTask and I am not sure as to why the tasks not getting generated properly in BPEL flow.
Has anyone experienced this issue or any ideas as to why this could happen?

After going through the exercise several times, I finally found out the reason as to why the BPEL activities are not getting generated. In the Human task form for the title, since it is a fixed string in my case I put something like the one given below:
Title : "APPROVE ORDER"
When you have fixed string within double quotes it does not generate BPEL activities correctly. You can try and u will see the problem.
My real question is should not throw proper error message when you try to drag and drop the HumanTask to BPEL flow.

Attachments still getting queued for a long time

Others have probably observed as well that after the forum upgrade, attachments are still getting queued for a long time, e.g. the attachment in this post has been queued for almost two hours:
http://forums.adobe.com/thread/433930?tstart=0
(The attachment posted 9:56 AM PDT, it's now 11:49 AM PDT.)
Is there an ETA on a fix for this? If it's going to be awhile, can attachments just be disabled until it's fixed?

In lieu of working attachments, I prefer recommending www.pixentral.com, for a couple of reasons:
- The camera icon is limited to 2 MB, while Pixentral has a larger limit. For the metadata issues I often address, I of course want to see the original. And not only is it inconvenient for the original poster to resize the image to upload it, but many Photoshop Elements users have difficulty resizing the pixel dimensions of photos.
- When a 2 MB image is inserted with the camera icon, the Jive software inserts a link to the original 2 MB image and relies on browser-side image resizing, slowing down everyone's page downloads. For an example:
http://forums.adobe.com/message/2000474#2000474
Here's the HTML:
<a href="http://forums.adobe.com/servlet/JiveServlet/showImage/4336/skin91.jpg">
<img alt="skin91.jpg" class="jive-image-thumbnail jive-image" onclick=""
src="http://forums.adobe.com/servlet/JiveServlet/downloadImage/4336/skin91.jpg" width="620"/>
</a>
The SRC URL refers to the full 2 MB image.

More than one Spaces are getting trimmed on BizTalk BAM portal

Hi All,
We are implementing BAM at our customer place , we observed ,if any field contains more than one space in input file then these spaces are getting trimmed in single space,however it is correctly sitting in the BAMPrimaryImport database
For example if input file ,which is processing through BizTalk, and if any field which value is "AB CDE" (field contain three space here ) then in portal it is appearing as
"AB CDE" (Only one space here) by default
I am not sure how theses values are displayed in portal and how to relove this default behiaver of BAM Portal, if somebody have faced this situation then i will appreciate your help please
Thanks
Yash

Well then I guess it's a Portal issue (yes you already knew that!) :-)
I know not everybody agrees with me, but the way I look upon it, the Portal should not be used as a product, but merely as a testing tool and inspiration as to what one can build on top of ones BAM activities. In other words, if you need to present your
BAM data to users, you should build your own; Pivot Tables, Reporting Services, ASP.NET Web sites etc. etc. on top of it.
Don't know if this is true, but I've heard that the BAM portal was a beta-product that shipped for the first time with BizTalk Server 2006 without being completed, and no code changes has taken place since.
Morten la Cour

Messages are getting lost during server restart

Hi,
we have a clustered environment.
soa_server1, soa_server2, soa_server3 and osb_server1, osb_server2, osb_server3
Queues are configured on each server.
Overall process flow is (JMS Queue (configrued in soa_server1) --> BPEL --> mediator -->JMS (configrued in osb_server1) --> proxyService --> Target System.
When there is a need to bounce the server (start / stop) ; and to make sure messages are not lost during server bounce.
we are following the below procedure for server start
1) pause soa_server1 queues then bounce soa_server1
2) pause soa_server2 queues then bounce soa_server2
3) pause soa_server3 queues then bounce soa_server3
We are observing there is a message lost after server bounce...
thanks in advance
anvv sharma

Are you using XA connection factory? If no then this may cause message loss. It is also considered a best practice to configure error queue for JMS queues to avoid message loss (as a precautionary measure).
How did you find that messages are getting lost?
Regards,
Anuj

Get-queue command in exchange 2013

I want to know what is the new velocity option means when we type get-queue command in exchange 2013.
1dentity
DeliveryType Status MessageCount Velocity RiskLevel OutboundIPPool
XMAIL02\74177
SmtpDeliv... Ready 0            0        Normal    0
XMAIL02\75312
SmtpDeliv... Ready 0            0        Normal    0
XMAIL02\75378
SmtpDeliv... Ready 0            0        Normal    0
XMAIL02\75404
SmtpDeliv... Ready 0            0        Normal    0
XMAIL02\75429
SmtpDeliv... Ready 0            0        Normal    0
XMAIL02\75443
SmtpDeliv... Ready 0            0        Normal    0
XMAIL02\75446
SmtpDeliv... Ready 5            0        Normal    0
XMAIL02\75473
SmtpDeliv... Ready 0            0        Normal    0
XMAIL02\75486
SmartHost... Ready 0            0        Normal    0
XMAIL02\75494
SmtpDeliv... Ready 0            0        Normal    0
XMAIL02\75495
SmtpDeliv... Ready 0            0        Normal    0
XMAIL02\75496
SmtpDeliv... Ready 0            0        Normal    0
XMAIL02\75524
SmartHost... Ready 0            0        Normal    0
XMAIL02\75810
SmtpDeliv... Ready 0            0        Normal    0

Hello,
Please see below:
http://technet.microsoft.com/en-us/library/bb125022(v=exchg.150).aspx#RatesAndVelocity
Exchange 2013 measures the rate of messages entering and leaving a queue and stores these values in queue properties. You can use these rates as an indicator of queue and transport server health. The properties are:
IncomingRate   This property is the rate that messages are entering the queue.
This value is calculated from the number of messages entering the queue every 5 seconds averaged over the last 60 seconds. The formula can be expressed as (i1+i2+i3+i4+i5+i6)/6,
where in = the number of incoming messages in 5 seconds.
OutgoingRate   This property is the rate that messages are leaving the queue.
This value is calculated from the number of messages leaving the queue every 5 seconds averaged over the last 60 seconds. The formula can be expressed as (o1+o2+o3+o4+o5+o6)/6,
where on = the number of outgoing messages in 5 seconds.
Velocity   This property is the drain rate of the queue, and is calculated by subtracting the value of IncomingRate from the value
ofOutgoingRate.
If the value of Velocity is greater than 0, messages are leaving the queue faster than they are entering the queue.
If the value of Velocity is equals 0, messages are leaving the queue as fast as they are entering the queue. This is also the value you'll see when the queue is inactive.
If the value of Velocity is less than 0, messages are entering the queue faster than they are leaving the queue.
At a basic level, a positive value of Velocity indicates a healthy queue that's efficiently draining, and a negative value of Velocity indicates a queue that isn't efficiently draining. However, you also
need to consider the values of the IncomingRate, OutgoingRate, and MessageCount properties, as well as the magnitude of the Velocity value for the queue. For
example, a queue that has a large negative value of Velocity, a largeMessageCount value, a small OutgoingRate value, and a large IncominRate value are accurate
indicators that the queue isn't draining properly. However, a queue with a negative Velocity value that's very close to zero that also has very small values for IncomingRate, OutgoingRate,
andMessageCount doesn't indicate a problem with the queue.

Highjump Messages are Getting error response from Peoplesoft

Hi,
We are on PT 8.52 and 9.1 PeopleSoft FSCM. We have integration with highjump for our supply chain operations.
We are getting below error message occasionally on highjump and the message will be sent to PeopleSoft if you resubmit that same message again from HJ.
A COM error occurred running the execute function in the [XmlLinkSend.XmlSend]
COM object to process the [XML Send AdvLink Work Queue] event.
Exception number (0x80040001).
Return Code (0001).
Source [XmlLinkSend.XmlSend].
Description [An er E_04001 O2012101811:00:10.855S
1SMGR 000
Any info on why these errors are coming on highjump logs will be appreciated.
Thanks

Hi surya,
You are saying 1122124 is IDOC numner & its not relevant to this idoc.
What it means,can u explain??? Actually there will be a chance an IDOC can mapped to N no of documents. This mapping will done through a BADI internally.
Regards
KER

We are getting the following error "Complete allocation structure GA"

Hi,
Please help on the below issue:-
We are carrying settlement of order (Period end activities ) for CO88 . We are getting the following error complete allocation structure GA.
Please guide us.
Regards
Srinivas

Hi,
Go to Allocation structure and maintain the Source and Settlement cost element for various cost groups in the structure.
And maintain this Allocation Structure in the settlement profile for your Production/Process orders.
Regards
Balaji

We are getting LDAP response read timed out, timeout used:15000ms oid ovd

Hi All,
We are having this in prod environment
We are getting a lot of these:
2012-09-12 14:43:52,097 [[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'] ERROR NamingException: [LDAP: error code 1 - LDAP Error 1 : LDAP response read timed out, timeout used:15000ms.]
2012-09-12 14:44:24,720 [[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'] ERROR NamingException: [LDAP: error code 1 - LDAP Error 1 : LDAP response read timed out, timeout used:15000ms.]
2012-09-12 15:09:57,206 [[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] ERROR NamingException: [LDAP: error code 1 - LDAP Error 1 : LDAP response read timed out, timeout used:15000ms.]
2012-09-12 15:25:12,029 [[ACTIVE] ExecuteThread: '23' for queue: 'weblogic.kernel.Default (self-tuning)'] ERROR NamingException: [LDAP: error code 1 - LDAP Error 1 : LDAP response read timed out, timeout used:15000ms.]
OID/OVD is apparently not doing well!
Regards,
PraveenSharma

Hi,
OID log:
[2012-09-12T11:27:24+02:00] [OID] [NOTIFICATION:16] [] [OIDLDAPD] [host: br2lfauth2p.intern.uc.se] [pid: 26857] [tid: 8] [ecid: 004mNrBiy2p9Pdw6wFnZ6G0006Zd007WLb,0] ServerWorker (REG):[[
BEGIN
ConnID:1076930 mesgID:915 OpID:914 OpName:modrdn ConnIP:::ffff:172.30.18.198 ConnDN:cn=oam,ou=ucsystemaccounts,dc=uc,dc=se
[gsldmda_ModifyDN]:ORA-60 ORA-00060: deadlock detected while waiting for resource
ORA-06512: at line 1
encountered
END
Regards,
PraveenSharma

Why are "gets" performed only through the primary?

Say, I have a partitioned cache -- two JVMs (JVM1 and JVM2) and two objects (A and B) such that A is primary on JVM1 and backup on JVM2 and B is primary on JVM2 and backup on JVM1.
When a client-application on JVM1 performs a "get" to get B, why is the data fetched from JVM2 (i.e. the primary of B)? Why isn't the data fetched from the backup of B which is also the same JVM (JVM1) that the client-application is on?
Is it because "gets" like "puts" get queued? If so, do the gets get queued in the same queue as the puts?

962776 wrote:
Say, I have a partitioned cache -- two JVMs (JVM1 and JVM2) and two objects (A and B) such that A is primary on JVM1 and backup on JVM2 and B is primary on JVM2 and backup on JVM1.
When a client-application on JVM1 performs a "get" to get B, why is the data fetched from JVM2 (i.e. the primary of B)? Why isn't the data fetched from the backup of B which is also the same JVM (JVM1) that the client-application is on?
Is it because "gets" like "puts" get queued? If so, do the gets get queued in the same queue as the puts?The backups do not service requests because they would possibly respond with stale data, and also because during failover after node failures the backup may not exist at all or have partial data, or are simply being recreated in a new place.
Also, before 3.5 backups could even be in a partially updated state in certain time points as multi-entry operations in the same cache the entries were backed up independently, which would make multi-entry reads much more complicated or even impossible to correctly service from the backup.
Best regards,
Robert

Bcc- create Initial deployment is getting queued up.

Hi All,
my initial bcc- create Initial deployment is getting queued up and is listed in plan. I have selected flag agents only deployment. Any pointers how can i start this deployment initiated. When i look into the DeploymentServer, i can see a snapshot initialised and Current statte : DONE_STOP.
Thanks in advance.
Alphonsa

First check if your agent is not having any errors and agent status is healthy. Assuming you have switching data-source deployment setup, you should also check the data-sources for all the agents in the Admin Console to see if they are pointing to the same data-source (switching A or switching B). In case you have just one agent then see if your deployment can proceed by changing the data-source form A to B or vice-versa. If you still face issue, try checking the logs for any errors related to DeploymentServer and DeploymentFulfiller.

Not all fields are getting updated in transformation

Dear all,
Please help me in the following issue:
I have the following scenario:
DSO1 and CUBE1. From DSO1 to CUBE1 I have transformation. Fields are mapped one to one.
Some of the fields are getting updated in transformation (22 fields) and some of them are not updated in transformation. (2 - storage location and steel grade).
The fields exist in DSO 1 but don't go into cube.
I did the following:
1. deleted transformation and dtp, recreate = > not working
2. copied the cube, and create new transformation and DTP...not working.
Any help would be appreciated
Thank you
Ramona

Hi Ramona,
Storage location (standard infoobject 0STOR_LOC) has plant as compunding object, check whether this is the issue ? (may be check with Steel grade infoobject also).
Else, do some RSRV checks on the DSO and Infoobject, if it doesn't bring up any issue, raise a message with SAP.
Check your BW Support Pack level , is it the latest ? Give more details about the scenario ?
Cheers,
CK

Activities are getting queued in CBS

Similar Messages

Maybe you are looking for