Activities at the time of Closing Plant.

Can you tell me what activities are generally involved at the time of closing plant and also these data should be transfered to new plant.
I know some of the functions need to do....
fixed assets - ( intra-co move / interco move / write off).
close Open accounts.
finances = cost centres? etc close off periods
Create new cost centers / OHG's
Enter new Overhead rates
Enter activity rates for new cost centers
Closing and Creation of new work centers
Mark materials for deletion in old plants
Move assets record from old to new plant
can any one please elaborate the above functions how we will do.
Please give me brief description.
Cheers,
Ravi

Hi Ravi,
I think you should ask this question to the [ERP Financials - Controlling|SAP ERP Financials - Controlling; forum also to get the better replies.
Else you can refer this [link |http://sap.ittoolbox.com/groups/technical-functional/sap-log-mm/plant-lock-1395165?cv=expanded]also.
Regards,
Shyamal

Similar Messages

  • Monitoring activities from the Time Capsule

    I have my TC since the first shipping of Apple and I'm searching for a way to see if there is any activity at all with the HD. I'm concern about a security issue, even if I use WPA2 Personal with time access control and a different psswd for the drive, the HD in the TC is still spinning while my computers are down. I took back the setting to "Flash On Activity" and the light is flashing all the time. The logs don't indicate access by another computer then the ones I authorized.
    Thanks for the help.

    You can chose between "Always on" (default value) or "Flash on activity" with Airport utility (TC version) in the manual setup under "Airport" view at Time Capsule tab there is a "option" button. There is also some optional parameters there.
    Thanks for the observation, I'll check again after an hour if the disk is still spinning.

  • How to free the memory after closing JavaFX Stage?

    I am creating a JavaFx application which contain a button. When I click on that button, it opens a new stage containing a table with thousands of data. It's working fine. But the problem is, when I close the Stage of that table, memory is not getting free by the application i.e. everytime when I open the new stage for table then memory is get increased. Is there any issue with JavaFX? or I have to do something else?
    I have tried to set everything null at the time of closing of that stage but still memory is not getting free.
    My button click code is :
    btn.setOnAction(new EventHandler<ActionEvent>() {
                @Override
                public void handle(ActionEvent event) {
                    Stage stage = new Stage();
                    Table1Controller controller = (Table1Controller) Utility.replaceScene("/tablesample/Table1.fxml", stage);
                    controller.init(stage);
                    stage.setTitle("Sample");
                    stage.setWidth(583.0);
                    stage.setHeight(485.0);
                    stage.initModality(Modality.APPLICATION_MODAL);
                    InputStream in = TableSample.class.getResourceAsStream("icon_small.png");
                    try {
                        stage.getIcons().add(new Image(in));
                    } finally {
                        try {
                            in.close();
                        } catch (IOException ex) {
                    stage.show();
    Utility.replacescene method : It loads the scene from given fxml and set to stage. At final It return controller object for that scene.
    public static Initializable replaceScene(String fXml, Stage mystage) {
            InputStream in = null;
            try {
                FXMLLoader loader = new FXMLLoader();
                in = Utility.class.getResourceAsStream(fXml);
                loader.setLocation(Utility.class.getResource(fXml));
                loader.setBuilderFactory(new JavaFXBuilderFactory());
                AnchorPane page;
                try {
                    page = (AnchorPane) loader.load(in);
                } finally {
                    in.close();
                Scene scene = new Scene(page);
                mystage.setScene(scene);
                return loader.getController();
            } catch (Exception ex) {
                return null;
        }Thanks

    Is there any issue with JavaFX? or I have to do something else?It's likely an issue with your application code (though it could be a bug in the JavaFX platform too).
    Either way debugging most memory issues in JavaFX (except for ones the graphics card texture related) is the same as debugging them in Java - so just use standard Java profiling tools to try to track down any memory leaks you have.
    Such work is as much an art as a science and takes some experience to get right, so grab your detective cap, download and use the tools linked and try and track it down:
    http://stackoverflow.com/questions/6470651/creating-a-memory-leak-with-java
    http://resources.ej-technologies.com/jprofiler/help/doc/indexRedirect.html?http&&&resources.ej-technologies.com/jprofiler/help/doc/helptopics/memory/memoryLeak.html
    http://www.ej-technologies.com/products/jprofiler/overview.html (recommended tool).
    http://visualvm.java.net/
    http://netbeans.org/kb/articles/nb-profiler-uncoveringleaks_pt1.html
    http://www.ibm.com/developerworks/library/j-leaks/ (this link is really old and somewhat outdated but explains some of the underlying concepts better than some newer articles I found).

  • My iPod touch 4 home key not responding half of the time

    My iPod touch 4 home key is not responding half of the time when closeing apps and when iPod is asleep

    You can try the standard fixes:
    - Reset. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    -  Restoring from backup
    - Restoring to factory defaults/new iPod.
    - If under waranty, try to get it fixed/replace under the warranty.
    - FIX for iPod Touch Home Button: Apple Support Communities

  • Wrong combination of Plant and Co code at the time of PO creation

    Dear all,
    At the time of creating PO when I am entering Plant and Company code system is not giving any error message if I am entering other Co code , i.e. Co code which is not assigned to the plant. I want an error message in case of maintaining wrong combination of plant and Co code.
    Any suggestion ??
    Reward assured for helpful answer.
    Thx and regds
    Amitava

    Go to SPRO - MM - Purchasing - Environment Data - Define Attributes of System Messages - System Messages
    Then maintain system messages 00 06 167 and then set as E (error) in category field.
    Reward if useful

  • How do I "save tabs and quit" in this new version of Firefox, as I did in the older version? I want to be able to see the same websites open from the last time I closed the computer.

    In an earlier version of Firefox, when I went to close it, I would get a prompt "save tabs and quit?" that allowed me to see the same websites open from the last time I closed the computer. Where is that feature on the new version of Firefox?

    Firefox 4 and later versions save the previous session automatically, so there is no longer need for the dialog asking if you want to save the current session.<br />
    Use "File > Exit" or "Firefox > Exit" (Mac: "Firefox > Quit Firefox") if you want to restore multiple windows or otherwise have problems with restoring tabs.<br />
    You can use "History > Restore Previous Session" to get the previous session at any time.<br />
    You may need to click the orange/gray Firefox button to see History.<br />
    There is also a "Restore Previous Session" button on the default <b>about:home</b> Home page.<br />
    Using the "Show my windows and tabs from last time" setting is a more reliable way to restore session data.
    * [http://kb.mozillazine.org/Menu_differences Firefox/Tools > Options] > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"

  • TS3694 I bought the iphone 5 has not been one week do not understand why the home key of the time activities at stops working, not crash or fall. hope its help, probably due to software, not hardware failure, what do I do now?

    I bought the iphone 5 has not been one week do not understand why the home key of the time activities at stops working, not crash or fall. hope its help, probably due to software, not hardware failure, what do I do now?

    Restore iPhone with current iTunes on computer. See if better. If still problem, make Genius reservation or set up Service and take or send to Apple for resolution. Of if easier for you, take receipt and iPhone, box and everything and return to where you bought it.

  • Info Record create at Plant level at the time of PO

    HI,
    Is the system create the Inforecord at plant level not at P.Org level.Problem is system can create the Inforecord at P.Org Level.
    If possibility that system create the Inforecord at plant level at the time of create the P.O.
    What  setting need to configure in the system.
    Thanks & Regards,
    Andra

    Hi,
    Go in transaction OMF0 and change the condition control as plant level
    for all those plants where the info records should be maintained at
    plant level. This will solve your problem.
    regards,
    JP

  • Firefox opens all the popup windows closed last time

    I open Firefox. Then a window and then tabs. Now some of the sites like bank sites open popups, sometimes more than one, to let users login. Also some of the sites like Opensubtitles.org open Ad popups. So it becomes numerous pop-ups even if the browsing duration is as short as 1 hour.
    I simply click those popup windows by clicking on the X button. There's no File->Exit and neither is there a File->Exit for the parent tab unless I want to exit from the Firefox itslef.
    So, after I close final/last tab of Firefox and eventually exit, then most of the times when I reopen Firefox it opens all the popups I had opened again. Even if the last tab to be closed was entirely unrelated to any of those pop-up windows or parent tabs.

    Make that "Firefox ->Preferences -> General -> When Firefox starts: "Show my windows and tabs from last time" is not selected as this is not the default.
    Basically this setting will make Firefox start with whatever windows and tabs that were last open when a user closes Firefox by way of File ->Quit/Exit as if Firefox was never closed.

  • Is it possible to add all the time I spent on activities in one calendar?

    I have set up iCal so that there are different calendars for each project that I am doing. Is there a way to automatically sum up the time that I spent on all the activities within that calendar? It would make my life easier because I can then tell a client quickly how much time I have spent on their account within a certain time-frame.
    I suspect this would require a script rather than something straight out of iCal?

    Clearly, the easiest and most reliable mechanism for logging time associated with projects in iCal is to use TimeLog 3 from mediaatelier. The release of Mac OS X 10.5 in near future will require and update to TimeLog 4, but that update will be free to registered TimeLog 3 users.

  • Fan on all the time even with apps closed

    why is fan on all the time even with apps closed?

    try an SMC reset: http://support.apple.com/kb/HT3964

  • Can I release all the activites  at a time?

    Hi Experts,
      I am have 50 activities in transport studio of NWDS which are supposed to move to test system. so can I select all the activities and release at at time from studio .
    Regards
    Sridhar

    Hi Sridhar,
    Yes, you can select multiple activities in the studio and release them together.
    But, be aware: if you select too may activities to release, your studio can run out of memory! Unfortunally I do not know the boundary for how many to select.
    Hope this helps.
    Regards,
    Alain.

  • I've just bought a MacBook Pro The system won't recognise the serial number even tho I've typed it in carefully several times The helpline is closed Any ideas?

    I've just bought a MacBook Pro The system won't recognise the serial number which I've copied very carefully several times from the underside of the computer
    The helpline is closed Any ideas? I don't know what the operating system is - how do I find that out?

    What are you trying to do?
    The operating system can be found by going to the Apple menu and selecting "About this Mac"
    Under "Mac OS X" should be the Version 10.6.x, clicking Software Update will update the operating system via the internet.

  • Im trying to restore my iphone 3gs to its factory setting at the same time updating to a newer version 6.1.2. while restoring, itunes states"We're sorry, we are unable to continue with your activition at this time." i cant open my phone, what does it mean

    Im trying to restore my iphone 3gs to its factory setting at the same time updating to a newer version 6.1.2. while restoring, itunes states"We're sorry, we are unable to continue with your activition at this time." i cant open my phone, what does it mean

    99.9% of the time, the cause of this issue is the fact the phone was jailbroken/hacked to unlock it for use on networks other than the network the phone was originally locked to. Apple maintains a database of officially unlocked iPhones, and when Apple's servers detect phones such as yours, activation stops & you get the message you got.
    So, either get a sim card from the carrier your phone was originally locked to, or get it officially unlocked, because it appears that it was not officially unlocked.

  • Can't reopen Itunes once it has been closed without computer restart.  Can't acces Itunes store 3/4 of the time.  Itunes won't recognize Ipod Touch 5  Help?!

    Since my Itunes was updated I have had nothing but problems.  When I open Itunes, the majority of the time I can not access the itunes store, though I can occasionally.  I have good internet connection.  I followed Itunes help associated with that and even downloaded the latest version of my graphics card.   Then if I close out of Itunes and go back to reopen it will not reopen at all.  The only way I can reopen it is by restarting my computer.  The other thing is that I have a brand new Ipod touch and Itunes does not recognize it.  Help!!!   I hate Itunes 11.0!!   If I didn't already have 7 Ipods and a song library of 6000, I would walk away from apple right now!!!   

    Okay for my issue I ended up calling Apple Support and getting a solution!   Yahoo!  It appears to be working properly without having to go back to the old version of Itunes, as was suggested by someone in this forum.   I have Windows 7, and they did suggest to makes sure my Windows 7 was updated, along with my Video Card.   The tech had me uninstall Itunes and Reinstall it, however she stressed to me that if it was not uninstalled in the proper order, Itunes still would not work after the re-install.  
    The proper order to uninstall Itunes from the add or remove programs, is:
    1st Itunes
    2nd Quicktime
    3rd Apple Software Update
    4th Apple Mobile Device
    5th Bonjour
    6th Apple Aplication Support
    Following the uninstall I shut the computer off completely for one minute, then powered it back up, and went to www.itunes.com to reinstall the software.   Seems to be working now, with my Windows 7, without having to revert back to the old version of itunes.  

Maybe you are looking for