Activities in Finance that involves moving of customer numbers

Hi,
I would like to know what are the activities in SAP that are involved with transferring of customers numbers ?
We are having some business shifts that we are renumbering our customer numbers from non-standard numbering to a standard numbering range of XX-series. Apart from AR balance transfer what else should be taken care of from finance ?

Hi bmjunar,
Here are some general links that might be helpful as you try to use Softmotion and SolidWorks:
http://zone.ni.com/devzone/cda/tut/p/id/9566
http://www.ni.com/virtualprototyping/training.htm
Best Regards,
Michael B.
Applications Engineer

Similar Messages

How can I access files that I moved from an older MacBook Pro to a newer one via Firewire and Migration assistant. The files show up on the new MacBook but cannot be opened. Thanks!

How can I access files that I moved from an older MacBook Pro to a newer one via Firewire and Migration assistant? The files show up on the new MacBook but cannot be opened. Thanks!

Get info then check permissions then add your curent user name (it was probably different on old Mac) and give your username full read/write permissions.

Is there anyway to print an ibook - was told I could add a link to the ibook that would send the customer to my web site where they could print it?

Is there anyway to print an ibook -
was told I could add a link to the ibook that would send the customer to my web site where they could print it?
I was told a customer could not print an ibook that they purchased?
Trying to figure out a way for them to purchase a book that they need to fill in information.
or download to their computers and print.
Any suggestions.... I have called and emailed - but can't get an answer
I have 5 books I would like to do this with.
<E-mail Edited by Host>

BlueEyesinLA wrote:
Is there anyway to print an ibook -
Not as such. You would have to put a pdf version on your web site for download, which the reader would then have to print for himself. A pdf version might look rather different than the epub or .ibooks version, you would have to try that yourself to see how much.

Hi I seemed to have picked something on my MacBook Pro that hits me with a survey that involves winning a new iPhone 5 or iPad. Is there anything you can advise to get rid of whatever it is?

Hi Anybody
I seemed to have picked something on my MacBook Pro that hits me with a survey that involves winning a new iPhone 5 or iPad. Is there anything you can advise to get rid of whatever it is? Bear in mind I am a greenhorn with regard to computers!
Computer: 2.8 GHz intel core 2 Duo MacBook Pro computer with Mac OS X Lion 10.7.5
I did download clamXav software as someone on line recommended it which duly scanned my computer and located some infected files. However, I don't know how to select these files to delete them. Does anyone know an idiot's guide for this software?
Regards Art4

Quit Safari.
Hold the shift key down and relaunch Safari.
Reset Safari.
Click Safari in the menu bar.
From the drop down select "Reset Safari".
Uncheck the box next to " Remove saved names and passwords".
Click "Reset".
Empty Caches
Safari > Preference > Advanced
Checkmark the box for "Show Develop menu in menu bar".
Develop menu will appear in the Safari menu bar.
Click Develop and select "Empty Caches" from the dropdown.
Turn off Extensions if any, and launch Safari.
Safari > Preferences > Extensions

Moving tabs from one window to another makes the new window vanish. I have hot corners enabled so when I move up to the right corner of my display I can see all my open windows but when I click on the tab that I moved to make it its own window it vanishes

Moving tabs from one window to another makes the new window vanish. I have hot corners enabled so when I move up to the right corner of my display I can see all my open windows but when I click on the tab that I moved to make it its own window it vanishes

I came up with an alternative solution.
Instead of actually trying to move the JInternalFrame from one JDesktopPane to another, I added a single, maximized JInternalFrame to the left side. When one of the right side frames is to be docked, I merely copy its ContentPane to the single JInternalFrame on the left, set the original to be non-visible, and adjust the properties of the JSplitPane to make the "docked" frame appear.
When the "close" button on the docked frame is pressed, I simply undo this procedure to "undock" the frame and redisplay it on the right-hand side (with its content intact from the docked frame, but in its original position).

Is there a way make a full width menu that opens with a custom icon like the link below?

I've been trying to make a hamburger menu that just has a custom icon to open revealing the sections of my site with links.
Huge. Digital agency. Digital business, design, marketing, technology
Anybody got any tips?
Thanks

You can use a lightbox composition

Table that links vendor and customer

hi
is there any table that links vendor and customer, for example theres a vendor zz400, he can be a customer as well
do you know in which table we can find that?

Hi
Go through the link given below :
Configuration for vendor as well as customer
With Regards
Sandeep

What r the steps that involve while v r using DBCONNECT AND UDCONNEC

Hi All,
What r the steps that involve while v r using DBCONNECT AND UDCONNECT AND IN WHICH DIFFERENT SCENARIOS V USE THEM.
REGARDS
KK

Hi,
To Configure UD Connect on the J2EE Server for JDBC Access to External Databases;
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/58f4db47-0501-0010-a2bf-ff01b150fdff
To create Driver on JDBC side
http://help.sap.com/saphelp_nw70/helpdata/en/b0/6e62f30cbe9e44977c78dbdc7a6b27/frameset.htm
Configuring the BI Java Connectors
http://help.sap.com/saphelp_nw70/helpdata/en/43/e35b3315bb2d57e10000000a422035/frameset.htm
Then to extract data use this...
Before you can transfer data from UD Connect sources into BI, you have to generate the metadata (the information about the source object and source object elements) in BI, in the form of a DataSource with a function module for extraction.
If your dataflow is modeled with objects based on the old concept (InfoSource 3.x, transfer rules 3.x, update rules 3.x), you can generate a DataSource 3.x for transferring data into BI from a database source system.
Prerequisites
You have modeled the InfoObjects that you want to use in the InfoSource and the data target or InfoProvider according to the UD Connect source object elements.
Note the following background information:
Using InfoObjects with UD Connect
Data Types and Their Conversion
Using the SAP Namespace for Generated Objects
Procedure
You are in the Modeling InfoSource tree of the Administrator Workbench. First create in InfoSource and activate the communication structure. Then generate the generic DataSource using the wizard in the InfoSource maintenance.
1. Choose InfoSources ® Your Application Component ® Context Menu (right mouse click) ® Create InfoSource.
2. Select the type of the InfoSource.
3. Under InfoSource, enter the technical name of the InfoSource, and assign a description and choose Continue.
The system creates an InfoSource and shows it in the InfoSource tree under your application components.
4. In the context menu of the InfoSource, choose Change .
The communication structure maintenance screen appears.
5. Using the previously modeled InfoObjects, create the communication structure (see Communication Structure).
6. Save and activate your communication structure
7. In the dialog box that follows you will be asked whether you wish to activate the dependent transfer program. Choose No.
8. In the InfoSource menu, choose Extras ® Create BW DataSource with UD Connect.
You get to the dialog box where you can assign a UD Connect source object to a DataSource and then generate the DataSource with the extractor. The fields for the DataSource are already being displayed in the table on the left side of the screen. The fields have the same name as the InfoObjects that you have used in the InfoSource.
9. Select the RFC Destination for the J2EE Engine.
Make sure that the local server is running. If the local server is running and you cannot open the table for RFC destinations, start the local server again.
10. Choose the UD Connect Source in which the data that you wish to access is located.
All available sources that are connected to the J2EE Engine are provided for selection in the input help. n instances are available per adapter.
11. Select the UD Connect Source Object.
All available source objects that are available in the selected UD Connect source are provided for selection in the input help. Source objects can be multi-dimensional storage or relational objects.
The system generates the name of the DataSource in the namespace 6B.
The DataSource is then replicated in BI.
The myself system is assigned to the InfoSource as source system as well as the DataSource.
The system generates a proposal for the transfer rules.
Since the DDIC structure and the function module are located in the SAP namespace, the following entries can be requested during generation:
Developer and object key or
Developer key or
Object key and
Transport request
If you do not make the requested entries, the generated infrastructure is not usable.
14. Change or complete the transfer rules as needed. For example, if a source object element is not assigned to a unit InfoObject, you can determine a constant for the unit, such as EUR for 0LOC_CURRCY (local currency).
15. Save and activate your transfer rules.
Recognizing Manual Entries
You can enter and change the RFC Destination, UD Connect Source and UD Connect Source Object manually. In order to validate these entries and the ones that depend on them, choose Recognize Manual Entries. For example, if you change the selected RFC destination, all of the field contents (US Connect Source, UD Connect Source Object, list of the source object elements) are invalid. If you choose Recognize Manual Entries, the dependent field contents are initialized and have to be maintained again.
Result
You have created the InfoSource and DataSource for data transfer with UD Connect. In the DataSource overview for the myself system, you can display the DataSource under the application components Non-Assigned Nodes.
When modeling InfoObjects in BI, note that the InfoObjects have to correspond to the source object elements with regard to the type description and length description. For more information about data type compatibility, see Data Types and Their Conversion.
The following restrictions apply when using InfoObjects:
Alpha conversion is not supported
The use of conversion routines is not supported
Upper and lower case must be enabled
These InfoObject settings are checked when they are generated.
Based on the large number of possible UD Connect sources, the most diverse data types are possible in the output system. For this reason, a compatibility check is made at the time of generation of the UD Connect DataSource that is based on the type information supplied by the source systems. This attempts to decrease the probability of errors during the extraction process.
(Refernce:SAP Notes)
Hope this helps,
regards
CSM Reddy

How can I get 10.8 to recognize my home folder that was moved to another drive?

I installed an SSD in my MacBook Pro a while back and replaced the optical drive with a regular SATA hard drive and moved my user folder to the larger drive. Unfortunately, Moutain Lion didn't like that, I can no longer log in to my account (I am assuming the relocated user folder is the problem, perhaps it is not?). Has anyone else encountered this problem?

Are you able to log into the machine with a different account (like an administrator account)? If so, open Directory Utility (/System/Library/CoreServices/Directory Utility.app) and go to the "Directory Editor" tab, and select your user in the list on the left (the one that you moved to the second drive). What is the value for "NFSHomeDirectory" for that user? The upgrade to OS X Mountain Lion could have reset this value (since having home directories on drives other than the boot drive (I think) isn't supported). Have you tried reapplying the procedure you used to move your home folder to the secondary drive prior to the upgrade?

Hello my creative cloud icon shows a red download error tag that states to contact customer support. Please advise

My creative cloud icon shows a red download error tag that states to contact customer support. Every app appears to be updated
Is this a bug. Should I be concerned?

NObody can tell you anything without exact system information and other technical details.
Mylenium

I have a MAC, Ive just installed OS10.10.3 operating system in it and I can't open Photoshop. This is a wide spread problem that involves Java and Photoshop software. Since you produce both these products , I turn toward you to direct me to the best "Fi

I have a MAC, Ive just installed OS10.10.3 operating system in it and I can't open Photoshop. This is a wide spread problem that involves Java and Photoshop software. Since you produce both these products , I turn toward you to direct me to the best "Fix"?

Go here Mac OS X Yosemite (10.10) compatibility FAQs | CC

I keep getting "error occurred while attempting to import file *******. The disc your are attempting to use is full." I have an external hard drive that I moved files over to, but apparently they're also still on my hard drive? HELP!

I keep getting "error occurred while attempting to import file *******. The disc your are attempting to use is full." I have an external hard drive that I moved files over to, but apparently they're also still on my hard drive? HELP!

So you have backed up the content of the computer's hard drive, too?
That usually is a great idea since it is possible to lose use of the system
if parts of it have accidentally been removed or get over-written, or the
main system files get corrupted, when the hard disk drive gets too full.
If you have not trashed the originals of your created content, that remain
after you made copies on an external hard drive or other device, then
that is what you'd have to do to reclaim the capacity still in use by them.
What are specifications of the hard disk drive? The unused capacity
verses the used, in GB? If the hard drive has less than 15 to 20%
free or unused capacity, you could run into trouble. Mine are 40-50%
unused hard drive space, so ample room is available for automatic
Virtual Memory to use that capacity as temporary swap file space.
This is helpful when the computer could use more physical RAM
memory capacity, but doesn't have it. Or if the RAM is maxxed out
and you can't add any more. Virtual Memory is part of OS X and the
system automatically can use as much as is available, but it is better
to be sure there is plenty of resources available to include chip RAM
as well as unused or free hard drive capacity for use as VM.
If for some reason your files in Trash won't go away when you empty
it, you may have to restart. Be sure you have not included any System
files in the content in the Trash, or the Mac may not start up later on.
You may have to boot the computer from the install-restore OS X DVD
and run Repair Disk from its version of Disk Utility, to be sure it's OK.
I'm guessing that by now you know enough about the vintage system
in the older hardware to figure it out, so I won't write about it now.
In any event... hopefully you can simply trash the files, but check them
carefully, & you may need to remove (copy to archive first) even more.
Good luck & happy computing!

[svn] 3687: Add some messaging tests for scenarios that involve subscribing to a destination , disconnecting from the channel currently being used and resubscribing to the destination .

Revision: 3687
Author: [email protected]
Date: 2008-10-16 11:23:39 -0700 (Thu, 16 Oct 2008)
Log Message:
Add some messaging tests for scenarios that involve subscribing to a destination, disconnecting from the channel currently being used and resubscribing to the destination. There is an issue that is causing the streaming/multipleDisconnectsResubscribesTest.mxml test to fail that I will log a bug for.
Added Paths:
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/longpolling/
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/longpolling/disconnectResubscribeJMSTest.mxml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/longpolling/disconnectResubscribeTest.mxml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/longpolling/multipleDisconnectsResubscribesTest.mxml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/polling/
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/polling/disconnectResubscribeJMSTest.mxml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/polling/disconnectResubscribeTest.mxml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/polling/multipleDisconnectsResubscribesTest.mxml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/streaming/
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/streaming/disconnectResubscribeJMSTest.mxml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/streaming/disconnectResubscribeTest.mxml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/streaming/multipleDisconnectsResubscribesTest.mxml

Revision: 3687
Author: [email protected]
Date: 2008-10-16 11:23:39 -0700 (Thu, 16 Oct 2008)
Log Message:
Add some messaging tests for scenarios that involve subscribing to a destination, disconnecting from the channel currently being used and resubscribing to the destination. There is an issue that is causing the streaming/multipleDisconnectsResubscribesTest.mxml test to fail that I will log a bug for.
Added Paths:
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/longpolling/
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/longpolling/disconnectResubscribeJMSTest.mxml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/longpolling/disconnectResubscribeTest.mxml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/longpolling/multipleDisconnectsResubscribesTest.mxml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/polling/
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/polling/disconnectResubscribeJMSTest.mxml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/polling/disconnectResubscribeTest.mxml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/polling/multipleDisconnectsResubscribesTest.mxml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/streaming/
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/streaming/disconnectResubscribeJMSTest.mxml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/streaming/disconnectResubscribeTest.mxml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/streaming/multipleDisconnectsResubscribesTest.mxml

Can't use songs that i moved onto a new computer

my family recently bought a new computer because the old one was having problems and we were afraid it would stop working, so i used a jump drive to take all of my purchased music from the itunes on my old computer and i put it all on the new one. i successfully synced everything onto my ipod, but i had to have the jump drive that i moved everything with plugged in. if i try to listen to or use anything without the jump drive the computer wont let me use it because it cant find the original file. i don't want to have to rely on the jump drive to use any of my itunes library, so how so i keep the computer from needing it plugged in to use the songs?

theres not a consolidate library choice under the library section in the file menu. and what does consolidating do?

TS1559 My 4th generation iPod touch is not allowing me turn both my WiFi ans Bluetooth on. I can't do anything that involves internet, not even downloading apps, which is decieving...

My 4th generation iPod touch is not allowing me turn both my WiFi ans Bluetooth on. I can't do anything that involves internet, not even downloading apps, which is decieving...

Sounds like this problem:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem.
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar

Activities in Finance that involves moving of customer numbers

Similar Messages

Maybe you are looking for