Activities post System copy  - SAP CRM 5.0

Dear All,
We were having a 3 system (SAP CRM 5.0 SP8) landscape. CRM Dev(CRD), CRM Q (CRQ) & CRM P (CRP) on Oracle 10 and HP UX 11. We have the JDI 7 SP8 instance connected to the CRM dev systemand all the 3 systems were configured as the run time systems in the JDI.
Now we have added a new tier for the Intergation testing called CRM
IST viz CRI there by coming into 4 system landscape (CRD, CRQ, CRI,
CRP). The CRI server is a copy of the CRP box and has been just installed and given to us. We need to do all the post installation activities.
Can you please provide us the proper documentation/ccokbook/check points so as to what all steps to be carried out after this system copy. It would be highly appreciated if you can give us a proper documents & links. We need to give the system to the consultants and before that we need to carry out all the post refresh activities, please help us in this urgently.
Thanks in advance.
Awaiting response.
Thanks & Warm Regards,
Rajeet Mathur.

Check
http://service.sap.com/systemcopy
and use both guides for NW2004s/7.0 ABAP and Java.
Markus

Similar Messages

  • Call to Web Sevice in External (non SAP) system from SAP CRM

    Hi,
    I have to make a call to External system from SAP CRM 5.0 system. The external system will provide a sample webservice which SAP will try to initiate
    Can you please tell me:
    1. What settings/object needs to be maintained in SAP in order to make this call.
    2. how I can make a call to this Web-Service from a BADI and pass the values to web service and also capture the returning value.
    Please explain in detail
    Thanks,
    Mike

    Hi Oliver,
    I have gone through the documentation and had been able to create a proxy object, uploaded the WSDL file (from local directory) and created logical port,
    However, when testing the service, I didn't received a sucess message but
    <CX_AI_SYSTEM_FAULT>
      <CODECONTEXT>Local</CODECONTEXT>
      <CODE>ERROR_WEBSERVICE_RUNTIME_INIT</CODE>
      <ERRORTEXT>Error when instantiating the Web service runtime (Error when initializing SOAP client application: ' error_text' )</ERRORTEXT>
      <LANGUAGE />
      </CX_AI_SYSTEM_FAULT>
      </cls:CX_AI_SYSTEM_FAULT>
    What might be the Problem ?

  • Call to Web Sevice in external system from SAP CRM

    Hi,
    I have to make a call to External system from SAP CRM 5.0 system. The external system will provide a sample webservice which SAP will try to initiate
    Can you please tell me:
    1. What settings/object needs to be maintained in SAP in order to make this call.
    2. how I can make a call to this Web-Service from a BADI and pass the values to web service and also capture the returning value.
    Please explain in detail
    Thanks,
    Mike

    Mike,
    You should honestly search the SDN site for consuming web services with ABAP.  There are some good examples.
    However the general procedure is easy:
    1.  Generate an ABAP proxy using the WSDL provided to you by the external program
    2.  Configure an HTTP destination for the server of the web services (needed for HTTPS calls)
    3.  Configure the logical port for the web service using lpconfig
    4.  Write the abap code to call the webservice via the proxy.  Works very similar to FM call in my opinion.
    To expose a webservice(bapi being called from outside) you need to do a little more work
    1.  Create a web services for the RFC enabled function module via SE80
    2.  Use wsadmin and wsconfig to make the service available
    3.  Publish the service out to the UDDI as needed.
    Once again this code is pretty well documented in the standard help and SDN.  Do a simple search on ABAP proxies and you will find what you need.
    Take care,
    Stephen

  • Call to webservice External (non sap) system from SAP CRM

    Hi,
    I have to make a call to External system from SAP CRM 5.0 system. The external system will provide a sample webservice which SAP will try to initiate
    Can you please tell me:
    1. What settings/object needs to be maintained in SAP in order to make this call.
    2. how I can make a call to this Web-Service from a BADI and pass the values to web service and also capture the returning value.
    Please explain in detail
    Thanks,
    Mike

    Hi,
    Check this
    Calling web service from ABAP - version 4.6C

  • XI 3.0 post system copy issue

    Hi Experts,
    We are using XI 3.0 on Windows and MSSQL platform, i have made system copy sucessfully from production system with process of DB restore for ABAP and Java Import, the new server is up and running both abap and java.
    Problem : In the newserver when i execute the tcode sxmb_ifr it takes me to production server url and not the new server hostname url.
    when i tried the http://newserver hostname.com:50000 it works fine. but from this url except home page every other link like exchaneprofile, SLD,IR and ID links still points to the production server host name.
    Please look at the following post installation activities i have performed till now in new serverand please guide where else i have to change the host name in the new server.
    Note: i did not cange the logical system assignment in scc4, beacuse i was not sure about the other problems we may face after directly assigning new logical system to the productive client in new server.
    1. Run installation check: Administration u2192 System administration u2192 Administration u2192
    Installation Check (transaction SM28).
    2. Configure the Workbench Organizer (SE06) with the option Database Copy. This
    releases all transport, repair, and customizing requests that have not been released in
    the source system.
    3. Configure STMS
    4. In transaction RZ70, change the value for the host and the gateway service in the group box
    Transport Information
    5. Change the pipeline to the Integration Server by running transaction SXMB_ADM   -> Configuration -> Integration Engine Configuration
    6. Open Visual Administrator -> Change the new host name in the following
                    services -> Jcorfcprovider all the services
                     services -> SLD Suppiler            
    7. Host name Change in SLDAPICUST
    Note: In the SAP system copy guide it says me to chane few parameters in exchange profile but when i go through the url http://newserver hostname.com:50000/exchangeProfile it takes me to production server, is there any option to change the exchange profile parameters ?
    Please help me.
    Thanks
    Sonali
    Subject modified
    Read the "Rules of Engagement"
    Edited by: Juan Reyes on Oct 31, 2008 9:48 AM

    Hi,
    the explanation of some of the thing you have written is clearly that the AII-Properties of the XI system have still not been switched.
    The properties must be changed once - afterwards the URL to the exchange profile and all other URLs should become valid.
    The key is therefore to change the exchange profile. Try please the to access the exchange profile by using the ip address or the fully
    qualified name of the new server http://<newserver>:<port>exchangeProfile/connection.jsp
    Did I get it right - you are redirected to the URL http://<oldserver>:<port>exchangeProfile/connection.jsp ?
    Regards
    Frank

  • What are the drawbacks of implementing QAS (Quick Address System) with SAP CRM

    Hi,
    What are the drawbacks of implementing QAS (Quick Address System) for duplicate address management in SAP. QAS is a third party software that deals with duplicate address in the system.
    Thanks in advance...

    Hi Peter,
    You can refer the CRM installation guide which has all the details including the post installation steps you require:
    You can refer to CRM installation guide in SAP Service Market Place,which would also guide you about post-installation steps.
    Please go through the below link:
    service.sap.com/instguides> SAP Business Suite Solutions>SAP CRM--> SAP CRM 7.0
    Hope this helps.
    Regards
    Yogesh

  • System Copy SAP NetWeaver Process Integration 7.1 documentation incorrect

    I am trying to a Homogeneous System Copy on PI 7.1 SP07.  I don't want to do a
    Copying the Primary Application Server Instance Only
    Because (as the documentation says) "As of SAP NetWeaver based on kernel 7.1, you can copy a primary application server instance only. With this procedure you can move a primary application server instance to a different host within your system."
    I don't want to move my system to another system.  I just want to do a Database refresh. That option is not available when I run SAPINST.
    I see the option for database refresh in the manual, but it's not a sapinst selection
    6.3Copying the Database Only u2013 Refresh
    With this procedure you can refresh the content of an existing database without having to copy the primary application server instance and to reinstall additional applications servers.
    I'm using the latest SAPINST and I have the correct DVD from Service Marketplace. 
    This database refresh option appears in both the "distributed system" selection under system copy --> target --> distribute system.
    "SAP NetWeaver Process Integration -> Software Life-Cycle Options --> System Copy -->  Target System --> Distributed System --> Based on AS ABAP and AS Java --> Database Refresh or Move".
    Is that the correct choice?  Why is the documentation wrong?
    "SAP NetWeaver Process Integration 7.1 including Enhancement Package" and "System Copy for SAP NetWeaver Process Integration 7.1".  So it must be correct (I think).
    I do see the database refresh option under the "

    Thanks for the reply.  So I would do this:
    "Copying the Primary Application Server Instance Only
    Because (as the documentation says) "As of SAP NetWeaver based on kernel 7.1, you can copy a primary application server instance only. With this procedure you can move a primary application server instance to a different host within your system."
    and then do the "database refresh" option under "distributed systems"?
    Is that correct?

  • Homogenous System Copy SAP 4.7, Oracle 9.2.0.7

    hi
    I have SAP 4.7, Oracle 9.2.0.7 system on windows.
    I need to perform a system copy of this to QAS System.
    I need some dcouments/procedure to do the same.
    Since it is a very old version, so i am not able to find any document.
    Please assist.

    Hi,
    1. http://www-03.ibm.com/systems/storage/disk/pdf/DS6K_SYS_CLONING_white_paper_093005.pdf
    2. http://service.sap.com/osdbmigration
    3. http://service.sap.com/notes -->547314 - FAQ: System Copy procedure
    Regards,
    Srini Nookala

  • Post System Copy Process

    Hello,
    We are getting ready to install new servers and we will be performing a homogenous copy process to the new servers which will have new names and ID on the network. We would like to run the new servers side by side with the current system so we can test. My questions are:
    1) With the systems running on the network together and we are ready to cut over to the new servers, would I just need to backup and restore the DB to the new DB server? Or do I have to go through the whole system copy process again?
    2) The first process we are using the R3Load because we have SQL 2000/Windows 2000. I understand the System Copy process with the Export file and then the migration (import) file, but do all of the post processes that are involved according to the System Copy guide have to be implemented again if I am able to simply restore the DB after doing the inital copy as described above?
    3) Any thoughts to how I can accomplish running the servers together for awhile for testing then cutting over to the new ones? Any quick notes from the field that would help make this easier?
    Thank you all so much,
    Jason

    >ERROR => DpHdlDeadWp: W14 (pid 3018) died http://dpxxdisp.c 14531
    the Work process are getting terminated.
    can you please paste full log from dev_w0 and dev_disp and std*
    >we upgraded the new kernel
    why don't you use the same kernel as same as source system?
    cheers,
    -Sunil

  • Synchronisation Points Post System Copy

    Hi Gurus,
    Can anyone pl. provide inputs on :
    - What is Synchronisation Point after System Copy ?
      i.e. Say if ECC PROD system is copied to ECC QAS. After this what steps   ( High Level Overview ) needed to ensure that 
      connected systems perform ok ?
    Any / ALL Inputs are welcome and highly appreciated.
    Many Thanks,
    Best Regards,
    - Ishan

    Post system copy steps are defined on the system copy guide.
    Also theres lots of information about this already.
    Please do some research before posting.
    Regards
    Juan

  • Query Designer Issues Post System Copy

    Hi All -
    We have just performed a system copy from our production to our QA systems.  Now, when we trying to view a report from Query Designer in our QA environment, we are being prompted for a username and password - which is trying to log in to our production environment!  (I know this because I locked myself out of production trying to log in via our QA Query Designer).  We've done all the BDLS runs, updated the RSLOGSYSDEST table poer OSS note 524554, and also updated the tRFC port in WE20.  What do we need to do to be able to run a query out of the BW QA system?
    Thanks for the assistance.
    Abby

    Hi Abby,
    Once you execute the query from designer you will get one URL generated in the explorer address bar here you will have to change the name of your production app server with quality app server then report will be executed on quality server.
    But this is temporary solution, you will have to check with your basis team regarding this and they will have to change some setting in system table and next time onward the system will pick proper URL.
    Regards,
    Durgesh.

  • SAP ECC 6.0 EHP5 with Opentext VIM 7.0 - Question on System Copy / Refresh

    Hi
    We are planning to perform a system refresh of our QA systems (platform: Windows / SQL 2005).  The ECC system has Opentext Vendor Invoice Management 7.0 on it.
    I was looking for some documentation explaining the Pre and / or Post system copy (refresh) activities specific to Opentext VIM, but could find none so far.
    I have tried on Opentext website, SAP SMP and Google.
    Are there any VIM specific tasks for system copy ?
    Is there any documentation that you can lead me to ?
    Any help / lead is appreciated.
    thanks
    Sree

    There shouldn't be any specific procedures for the system copy as there is OpenText VIM add-on installed on the system. As the add-on's are stored in the database you just need to restore the database and do the post refresh activities.
    RB

  • Upload of Campaign and Leads from flat file into SAP CRM system

    Hi Gurus,
    We need to upload Campaign and Leads from our legacy systems to SAP CRM systems. The source data will be available in the form of flat files (tab delimited)
    Please let me know the possible ways of doing this.
    Reward points are assured.
    Thanks in advance.

    Hi
    you can use external list management functionality in CRM 5.0 useing the flat file tab delimited you can upload the contacts and create business partners followed by lead transaction types with business partners created and also external list management will allow you to create target groups for executing the campaigns in SAP CRM
    please do reward points if helpful
    regards
    Dinaker vikas

  • System Copy for SAP Netweaver 2004 ABAP and Java

    Dear Friends,
    We are planning to do System copy for CRM 4.0 (ABAP+Java) from PROD to Quality.
    Production has following
    Production
    CRP (ABAP+JAVA, Oracle 10g)
    CR1 (Java Standalone, CRM Applications, Oracle 10g)
    CR2 (Java Standalone, CRM Applications, Oracle 10g)
    Test
    CRT (ABAP+JAVA, Oracel 10g)
    CR1 (Java Standalone, CRM Applications, Oracle 10g)
    As per my understanding perfrom System Copy in two methods
    1. Using Offline backup of CRP from the Split Mirror backup.
    2. Export of the CRP from the Split Mirror backup.

    If you have Split Mirror available you could definitely use it. Redirected restore or export/import are the alternatives.You could also use file copy (system offline is preferred).
    BMG

  • BDLS Conversion after System Copy fails

    Hi All,
    We are doing a Homogeneous System Copy on a AIX 5.3/Oracle 10.2.0.4/ SAP ERP 6.0 environment.
    After the system copy we had to run BDLS to convert logical system names in tables. Except for 3 tables namely EDPP1, TBD05 and TBD06 the BDLS run was successful.
    We tried to convert the logical system names in these tables by running BDLS for these tables individually however they failed again.
    The error was - "Error in field of table. Manual correction required"
    I checked SAP Note 121163 and it is mentioned in this note -
    "If the new logical system name already exists in the system, it can cause errors for tables in which the logical system is key field or
    unique index (for example, COFIO1). In this case the number of converted entries is smaller than the number of selected entries."
    And in this case a manual post-processing is required. How do I go about doing this manual post-processing?
    1. Should I maintain these directly at the table level - which is cumbersome as there are a lot of entries?
    2. Or using a small ABAP program?
    Please let me know if any other information is required frommy side.
    Thanks, Dibya

    Hi,
    Yes ofcourse, you need to check all settinfs, once you copy teh system you are going loose all RFC's and Source and Destinations ectc, so adject all that settings.
    See the following  SAP Notes:
    SAP Note 886102 - System Landscape Copy for SAP NetWeaver BW
    SAP Note 325470 - Activities after client copy in BW source systems
    SAP Note 325525 - Copying and renaming systems in a BW environment
    SAP Note 1333302 - Special procedure for BW system copy
    SAP Note 996238 - Dump 'RFC connection error' after BW system copy
    Search for PDF in SDN
    How Tou2026System Copy in SAP Business Intelligence System Landscapes
    Thanks
    Reddy

Maybe you are looking for