Activity failed for BPM DC

Hi,
I am using CE 7.11 and I have created a BPM DC. I do not find any problem while building are deploying. But, when i activate this DC, its not getting activated, in the build log it is showing that DC is broken. any idea where i am going wrong?
Thanks in advance.
Prasanthi.

Hi,
I guess when saying the build is working you mean the local build, right? When activating an activity this is triggering a central build on CBS. Due to configuration differences, it might occur that a central build is failing. So, as one of the earlier repliers mentioned, it is important to post the build error happending during activation. Could you do so?
Best regards,
Stefan

Similar Messages

  • IMessage Activation Failing for Google Apps Hosted Email Addresses

    I'm having failuers when I try to add additional emails addresses to iMessage on iOS 7.0.4.  It appears that the failure has to do with email being hosted on non-primary systems.  example:
    [email protected]  verifies
    [email protected]  failes  MX record says google.com
    [email protected] verifies
    [email protected] which is hosted on prodigy servers, failes. MX record resolves to prodigy.net
    Is there a work around for this.  resending the validation email doesn't seem to make a difference.

    This was entirely my fault.  I had two different AppleIDs with which I was trying to use the same email address.

  • Check In failed for the activity

    Hi,
        Here we have developed a Webdynpro application through JDI. We have created an activity for the application. The application is working fine, but we are facing the problem with the check in. It is saying check in failed for the activity. Below are the deatils about the exception occured while check in.
    13:31:51.546  UPLOAD  (FAILED: Upload file content on repository failed)  Create.wdview.xlf   (C:\Documents and Settings\Suresh.Bachimanchi\.dtc\4\DCs\company\example\_comp\src\packages\com\abc\example\vac\create\Create.wdview.xlf)
    13:31:51.546  CHECKIN  (FAILED: Upload file content on repository failed)  ExampleApp  (act_w_test_example_2e_com_FPM_DEV_dev_inactive_u_cmsuser_t_2006_10_09_12_46_38_GMT_6ba2c1c6-6897-4411-ab2c-808649ab567c)
    Regards
    Suresh

    Hi,
    Refer to the flwg link,
    http://help.sap.com/saphelp_nw04/helpdata/en/21/1cdf3f3e054e1de10000000a155106/content.htm
    Hope it helps.
    Regards
    Srinivasan T

  • HT5624 when I turn my iMassage on it will go to activation mode  for along time and then fails Whats teh problem ?!!

    when I turn my iMassage on, it will go to activation mode for a long time and then fails. Whats the problem ?!!

    Do you have a texting plan and are you connected to data when you try to activate? Check this support document for trouble with activating iMessage. http://support.apple.com/kb/TS4268

  • Dbus[359]: [system] Activation via systemd failed for unit 'dbus-org.b

    from  journalctl -b, I get some warning messages like this.
    Oct 26 12:52:48 myhost dbus-daemon[359]: dbus[359]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
    Oct 26 12:52:48 myhost dbus[359]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
    Oct 26 12:52:48 myhost dbus-daemon[359]: dbus[359]: [system] Activation via systemd failed for unit 'dbus-org.bluez.service': Unit dbus-org.
    Oct 26 12:52:48 myhost dbus[359]: [system] Activation via systemd failed for unit 'dbus-org.bluez.service': Unit dbus-org.bluez.service fail
    Oct 26 12:52:48 myhost pulseaudio[1234]: [pulseaudio] bluetooth-util.c: org.bluez.Manager.ListAdapters() failed: org.freedesktop.systemd1.Lo
    Oct 26 12:52:49 myhost rtkit-daemon[1235]: Successfully made thread 1260 of process 1260 (/usr/bin/pulseaudio) owned by '1000' high priority
    Oct 26 12:52:49 myhost rtkit-daemon[1235]: Supervising 2 threads of 2 processes of 1 users.
    Oct 26 12:52:49 myhost pulseaudio[1260]: [pulseaudio] pid.c: Daemon already running.
    I want to disalbe bluez.service,but failed,
    #systemctl disable dbus-org.bluez.service
    Failed to issue method call: No such file or directory
    I have no bluetooth device in my laptop, how to resolve this porblem?
    Thanks in advance.
    Last edited by eastpeace (2012-10-26 06:12:53)

    AND additional information
    # systemctl status dbus-org.bluez.service
    dbus-org.bluez.service
          Loaded: error (Reason: No such file or directory)
          Active: inactive (dead)

  • HT3939 how to know the carrier for iphone 5 if its showing activation failed please insert a sim card

    how to know the carrier of iphone 5 if its showing activation failed please insert a sim card and i don't know what sim card goes in it and if it is cdma or gsm.
    i stuck on this step. i can't go further it just shows imei and meid number but iccid is displayed unknown. please help me to move further. thank u.

    contact apple.

  • Portmap translation creation failed for udp src inside dst inside

    Hi!
    I have a problem with allowing traffic to UC500 subnets on ASA 5505 inside interface.
    My asa is a main router with addres 192.168.1.1
    UC500 voip box is connected to ASA's inside interface through UC500 WAN port with UC500 with 192.168.1.2 address.
    Firewall and NAT on UC500 is disable
    UC500 sip traffic works fine. voipbox creates its subnets for data and voip - 192.168.10.0 and 10.1.1.0. another important address is 10.1.10.1 which is UC500 CUE.
    My problem is that from within ASA local network (192.168.1.0) i cannot reach UC500 subnets, neither can I reach ASA's local network from the UC subnets.
    the log says
    3
    Sep 07 2013
    00:21:49
    DC
    53
    PBXCUE
    32901
    portmap translation creation failed for udp src inside:DC/53 dst inside:PBXCUE/32901
    I tried exempting uc500 subnets on ASA but that didn;t work.
    Funny thing is that I CAN reach the UC500 subnets when connecting with VPN to ASA...
    Please help! I am not familiar with CLI.
    I configured static route to 10.1.10.0 and since then I was able to ping 10.1.10.1 thorugh ASA;s VPN.
    I would be grateful for ideas.
    Lukasz
    global (inside) 1 interface
    global (outside) 101 interface
    nat (inside) 0 access-list inside_nat0_outbound
    nat (inside) 101 0.0.0.0 0.0.0.0
    static (inside,outside) tcp interface https IIS https netmask 255.255.255.255  dns tcp 200 200 udp 200
    static (inside,outside) tcp interface www IIS www netmask 255.255.255.255  dns tcp 200 200 udp 200
    static (inside,outside) tcp interface smtp IIS smtp netmask 255.255.255.255  dns
    static (inside,outside) tcp interface pop3 IIS pop3 netmask 255.255.255.255  dns
    static (inside,outside) udp interface domain RenBetPBX domain netmask 255.255.255.255  dns
    static (inside,outside) udp interface 5061 RenBetPBX 5061 netmask 255.255.255.255  dns
    static (inside,outside) udp interface sip RenBetPBX sip netmask 255.255.255.255  dns
    static (inside,outside) tcp interface 13000 SQL 13000 netmask 255.255.255.255  dns
    access-group inside_access_in in interface inside
    access-group outside_access_in in interface outside
    route outside 0.0.0.0 0.0.0.0 x.x.x.x
    route inside PBXCUE-network 255.255.255.0 RenBetPBX 1
    timeout xlate 3:00:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    dynamic-access-policy-record DfltAccessPolicy

    Hello Julio!
    Thank you for your advice.
    I have managed to solve my main problem by reconfiguring my switches vlans - enabling trunk port configs for required ports and allowing them access to both vlans.
    Now I can see everything from all of my inside networks.
    I continue my ASA adventures - I have managed to configure L2TP client access for my windows users, RADIUS authentication for domain users and yesterday night I have managed to configure site to site VPN with my RV120W router.
    I am only an enthusiast but my recent successes have given me apetite for more...
    I keep reading forums and trying to solve most of my problems myself but I have faced another one now and thought that maybe you could give me another tip on where to look for the issue:
    I still have one problem with my L2TP VPN config - I have configured split tunnel on the group policy to tunnel only 192.168.1.0 network requests.
    access-list DefaultRAGroup_splitTunnelAcl standard permit 192.168.1.0 255.255.255.0
    My network at home is 192.168.2.0 but it still tunnels everything (when I check my ip after connecting to VPN my home laptop still identifies with ASA gateway(!) address .
    access-list outside_access_in extended permit icmp any interface outside object-group DM_INLINE_ICMP_1
    access-list outside_access_in extended permit tcp any interface outside object-group DM_INLINE_TCP_1
    access-list outside_access_in extended permit tcp any interface outside eq smtp
    access-list outside_access_in extended permit tcp any interface outside eq 8080
    access-list outside_access_in extended permit tcp any interface outside eq 23456
    access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_1 object-group DM_INLINE_NETWORK_1 any
    access-list outside_access_in extended permit tcp any interface outside eq 13000
    access-list outside_access_in extended permit tcp any interface outside range 8001 8016
    access-list outside_access_in extended permit tcp x.x.x.x 255.255.255.0 interface outside eq ssh
    access-list inside_nat0_outbound extended permit ip any 192.168.1.240 255.255.255.240
    access-list inside_nat0_outbound extended permit ip any PBXVOIP-network 255.255.255.0
    access-list inside_nat0_outbound extended permit ip any PBXCUE-network 255.255.255.0
    access-list inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 igolomska-network 255.255.255.0
    access-list inside_access_in extended permit udp object-group DM_INLINE_NETWORK_2 any object-group DM_INLINE_UDP_1
    access-list inside_access_in extended permit ip host IIS any
    access-list inside_access_in extended permit ip any any
    access-list inside_access_in extended permit ip host RBSTORE_NAS any
    access-list inside_access_in extended deny udp any any object-group DM_INLINE_UDP_2
    access-list inside_access_in extended permit tcp any any eq 5432
    access-list inside_access_in extended permit tcp any host PBXCUE eq www
    access-list inside_access_in extended permit tcp host PBXCUE any eq www
    access-list inside_access_in extended permit tcp host RBCAMSTORE_NAS host EXCH-MBX eq smtp
    access-list inside_access_in extended permit tcp host RBSTORE_NAS host EXCH-MBX eq smtp
    access-list inside_access_in extended permit tcp host RENBETUPS host EXCH-MBX eq smtp
    access-list inside_access_in extended permit tcp host RenBetPBX host EXCH-MBX eq smtp
    access-list DefaultRAGroup_splitTunnelAcl standard permit 192.168.1.0 255.255.255.0
    access-list outside_1_cryptomap extended permit ip 192.168.1.0 255.255.255.0 igolomska-network 255.255.255.0
    route print shows:
    and 192.168.1.240 is my VPN IP - its metric has higher priority than the local gateway.
    How do I change it?
    Active Routes:
    Network Destination        Netmask          Gateway       Interface  Metric
              0.0.0.0          0.0.0.0      192.168.2.1    192.168.2.126   4250
              0.0.0.0          0.0.0.0         On-link     192.168.1.240     21
          80.51.24.22  255.255.255.255      192.168.2.1    192.168.2.126   4251
            127.0.0.0        255.0.0.0         On-link         127.0.0.1   4531
            127.0.0.1  255.255.255.255         On-link         127.0.0.1   4531
      127.255.255.255  255.255.255.255         On-link         127.0.0.1   4531
          169.254.0.0      255.255.0.0         On-link     192.168.2.126   4506
      169.254.104.126  255.255.255.255         On-link     192.168.2.126   4506
      169.254.255.255  255.255.255.255         On-link     192.168.2.126   4506
        192.168.1.240  255.255.255.255         On-link     192.168.1.240    276
          192.168.2.0    255.255.255.0         On-link     192.168.2.126   4506
        192.168.2.126  255.255.255.255         On-link     192.168.2.126   4506
        192.168.2.255  255.255.255.255         On-link     192.168.2.126   4506
            224.0.0.0        240.0.0.0         On-link         127.0.0.1   4531
            224.0.0.0        240.0.0.0         On-link     192.168.2.126   4506
            224.0.0.0        240.0.0.0         On-link     192.168.1.240     21
      255.255.255.255  255.255.255.255         On-link         127.0.0.1   4531
      255.255.255.255  255.255.255.255         On-link     192.168.2.126   4506
      255.255.255.255  255.255.255.255         On-link     192.168.1.240    276
    ===========================================================================
    I am starting to feel like I am using a bit too much of your friendliness ...
    Best Regards and have a great day!
    Lukasz

  • Office 2013 pro plus activation fail on windows 8

    hi guys
    I have issue about getting Office 2013 pro plus activation fail on windows 8 via KMS server.
    When I test using KMS server via nslookup -type=srv _vlmcs._tcp all looks good with corporate KMS server.
    Activation fine with windows 7 environment
    Any idea
    This topic first appeared in the Spiceworks Community

    Hi
    We recommend you download it from the website and extract it again to make sure your source install is complete.
    Run setup.exe as administrator then try the install.
    If the issue persists, refer to the article on General troubleshooting for installing Office 2013 and Office 365:
    http://support.microsoft.com/kb/2822317
    Regards
    Tylor Wang
    TechNet Community Support
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Tacacs authentication fails for one user account for only one switch

    Hi,
    I am having an scenario, where as Tacacs authentication fails for one user account for only one switch.
    The same user account works well for other devices.
    The AAA configs are same on every devices in the network.
    Heres the show tacacs output from the switch where only one user account fails;
                  Socket opens:        157
                 Socket closes:        156
                 Socket aborts:        303
                 Socket errors:          1
               Socket Timeouts:          2
       Failed Connect Attempts:          0
            Total Packets Sent:       1703
            Total Packets Recv:       1243
              Expected Replies:          0
    What could be the reason ?
    No errors on ACS server; same rights had been given to the user account.
    Thanks to advise.
    Prasey

    Hi there,
    Does the user get authenticated in the ACS logs?
    reports and activity----> failed attempts
    ro
    reports and activity----->  passed authentications
    That will help narrow it down.
    Brad

  • Activation of the activity fails u0096 no source files in the active workspace

    Dear All,
    I’m working on a NWDI installation since last month. The NWDI server (NW2004s) has been installed and configured with the following parameters:
    Some Details:
    -     Java Stack on SPS 12
    -     No complete Developer Workplace, we only use the Studio (SPS 12)
    -     OS: WIN 2003
    -     DB: Oracle 10g
    -     SDK: 2 SDK, Standard Edition x64 1.4.2_15
    Installation Usages Types: DI, AS Java, EP Core, EP (EP for the Visual Composer)
    Performed configuration steps:
    -     adaptation of VM parameter in the Visual Admin
    -     patched the NWDI Server and the Studio from SPS 9 to support package stack 12 + available single patches
    -     run the template installer => NWA with type “DI Allinone – run all post installation Steps for DI, CBS, CMS, DTR”
    -     Oracle Parameters changed, User and Authorizations created and assigned (UME, J2EE Security roles, DTR => ACL List), SLD (Creation of a new Landscape), Configuration of the CBS with the VA
    -     Configuration of the Studio (SAP J2EE Engine (fill in the NWDI engine), Proxy Settings, Development Configuration Pool)
    Development Steps for an example:
    -     Creation of a new software product (SLD)
    -     Namespace reservation on SLD => Application Context Root, Development Component Name
    -     Created a Domain and a Track on CMS
    -     Attached all Software components to the track (my own dc, SAP-JEE, SAP_Buildt, SAP_JTechs)
    -     Check-In the Software Components on Transport studio => CMS
    -     Moved the development configuration into Studio
    -     Created a ear- and a web-project => Display a JSP File (It’s the same example like in the SAP Course TADM10)
    -     Check-in the activity under “Open activities” => Activate
    My problem appears during the check-in phase in the studio. I was able to check-In the source files in to the inactive Workspace on the DTR, but the activation of the activity fails. (I thought that the build process runs automatically after the activation - also the movement from the source files from the inactive to the active workspace?).
    I received no error message, but I can’t find any source files in active workspace. The activity seems to be pending. I locate the request in the CBS, the request state is “failed” regarding the request type “activate”.
    At the moment there is no separate runtime system assigned to the NWDI System.
    Questions:
    1.     Have I forgotten an important configuration step?
    2.     Can I use the NWDI Server also as a runtime environment (DEV System)?
    Please let me know if somebody has an idea.
    Thanks.
    Christoph

    Hello Michael,
    thanks a lot for your answer.
    I found the following error messages in the <b>request log</b>:
    <i>Calculate all combinations of components and variants to be built...
         "xxxtest.com/math/calc/webdc01" variant "default"
              "xxxtest.com/math/calc/webdc01" variant "default" cannot be built. Activation will fail.
              INVALID dependency is declared to public part: default.
              [DC 247 variant "default"][SC 65 "xxxtest.com_TASCHENRECHNER_1"] using [PP default of DC 6 at Build-Time Dependency]
         "xxxtest.com/math/calc/eardc03" variant "default"
              "xxxtest.com/math/calc/eardc03" variant "default" cannot be built. Activation will fail.
              The required Build Plugin "sap.com/tc/bi/bp/enterpriseApplication/enterpriseApplication" IS UNKNOWN. None of the compatments contains a suitable plugin for this component.
              [DC 248 variant "default"][SC 65 "sanofitest.com_TASCHENRECHNER_1"] using [BP sap.com/tc/bi/bp/enterpriseApplication/enterpriseApplication]
    Prepare build environment in the file system... started at 2007-09-04 06:13:54.316 GMT
    Prepare build environment in the file system... finished at 2007-09-04 06:13:54.316 GMT and took 0 ms
    ===== Pre-Processing =====  finished at 2007-09-04 06:13:54.332 GMT and took 406 ms
    Change request state from PROCESSING to FAILED
    ERROR! The following problem(s) occurred  during request processing:
    ERROR! The following error occurred during request processing:Activation failed due to component "xxxtest.com/math/calc/webdc01" variant "default". The component is BROKEN.
    ERROR! The following error occurred during request processing:Activation failed due to component "xxxtest.com/math/calc/eardc03" variant "default". The component is BROKEN.
    REQUEST PROCESSING finished at 2007-09-04 06:13:54.332 GMT and took 422 ms</i>
    The <b>Build Log</b> was empty.
    Thank you in advance.
    Best regards
    Christoph

  • Terminate:Activity failed; there is no back end error log. - Query Designer

    Hello all,
    Has anyone encountered this erro before while using query Designer. I am trying to drag an infoobject in the rows section and I get this STOP error in message section at the bottom.
    Terminate: Activity failed; there is no back-end error log [A006(R9E)]
    Diagnosis
    An error occurred in the back end.
    System Response
    An error occurred in the back end for which there is no error message. You cannot continue to work.
    Procedure
    Exit the Query Designer and correct the error on the back end.
    Then start the query designer again.
    Procedure for System Administration
    I dont get what is going wrong here,
    Thanks,

    hi,
         There may be some problems with the connectivity in the box which you have logged in or in the excel properties itself. Try to login again and see if the problem is resolved else contact the BASIS or admin.
    Thanks,
    vrrp.

  • Activation failed due to sructure generation error.-URGENT

    i tried to check in an activity but activation failed due to the foloowing error:PLEASE HELP VERY URGENT
    Development Component Build (2008-03-14 10:09:20)
      Component name: tablist
      Component vendor: worldbank.org
      SC compartment: worldbank.org_GDB_OPERATIONS_1
      Configuration: WAS_MIGATEST_D
      Location: WAS_MIGATEST_D
      Source code location: http://sapjdi01:50000/dtr/ws/MIGATEST/worldbank.org_GDB_OPERATIONS/dev/active/DCs/worldbank.org/tablist/_comp/
      DC root folder: /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/worldbank.org/tablist/_comp/
      DC type: Web Dynpro
      Host: sapjdi01
    DC Model check:
              [dcmake] All used DCs are available locally
              [dcmake] validating dependency to build plugin "sap.com/tc/bi/bp/webDynpro"
              [dcmake] validating dependency to  public part "default" of DC "sap.com/tc/cmi"
              [dcmake] validating dependency to  public part "default" of DC "sap.com/tc/ddic/ddicruntime"
              [dcmake] validating dependency to  public part "default" of DC "sap.com/tc/ddic/metamodel/content"
              [dcmake] validating dependency to  public part "default" of DC "sap.com/tc/wd/webdynpro"
              [dcmake] validating dependency to  public part "default" of DC "sap.com/tc/logging"
              [dcmake] validating dependency to  public part "default" of DC "sap.com/tc/wdp/metamodel/content"
              [dcmake] validating dependency to  public part "default" of DC "sap.com/com.sap.aii.proxy.framework"
              [dcmake] validating dependency to  public part "default" of DC "sap.com/com.sap.aii.util.misc"
              [dcmake] validating dependency to  public part "default" of DC "sap.com/com.sap.exception"
              [dcmake] validating dependency to  public part "default" of DC "sap.com/com.sap.mw.jco"
              [dcmake] validating dependency to  public part "pp_connserv" of DC "worldbank.org/connserv"
              [dcmake] DC model check OK
    Start build plugin:
              [dcmake] using build plugin: sap.com/tc/bi/bp/webDynpro
              [dcmake] starting build plugin from : /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/bi/bp/webDynpro/_comp/gen/default/public/webDynpro/
    Build Plugin 'WebDynproPlugin', Version 6.40 SP 19 (630_VAL_REL, built on 2006-10-27 02:01:51 CEST)
       development component:  tablist (worldbank.org)
          software component:  GDB_OPERATIONS (worldbank.org)
                    location:  WAS_MIGATEST_D
                        type:  Web Dynpro
               build variant:  default
             source location:  http://sapjdi01:50000/dtr/ws/MIGATEST/worldbank.org_GDB_OPERATIONS/dev/active/
           plugin start time:  2008-03-14 10:09:21 GMT+00:00
                     Java VM:  Classic VM, 1.4.2 (IBM Corporation)
    General options:
      convert *.xlf to *.properties: yes
      include sources for debugging: yes
    Source folder META-INF exists but is empty.
    Source folder src/configuration exists but is empty.
    Plugin initialized in 1.026 seconds
    Warning: Runtime dependency to connserv (worldbank.org) not allowed (incompatible runtime type).
    Preparing data context..
    No 'default' JDK defined, will use running VM.
    Data context prepared in 0.128 seconds
    Executing macro file..
      Using macro file:     /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/bi/bp/webDynpro/_comp/gen/default/public/webDynpro/macros/build.vm
      Creating output file: /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/worldbank.org/tablist/_comp/gen/default/logs/build.xml
    Macro file executed in 3 seconds
    Starting Ant..
      Using build file:     /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/worldbank.org/tablist/_comp/gen/default/logs/build.xml
      Using build target:   build
      Generation folder:    /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/t/013EC0ABDECC3015F13C417F5CBF217B
      Using Ant version:    1.5.4
    prepare:
         [mkdir] Created dir: /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/worldbank.org/tablist/_comp/gen/default/deploy
    compile:
         [ddgen]
         [ddgen] [Info]    Property deployment is true: Deployment information is provided!
         [ddgen] [Info]    Property sourcepath: /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/worldbank.org/tablist/_comp/src/packages
         [ddgen] [Info]    Property targetpath: /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/t/013EC0ABDECC3015F13C417F5CBF217B/gdd
         [ddgen] [Info]    Property archivename: worldbank.org~tablist
         [ddgen] [Info]    Property vendor: worldbank.org
         [ddgen] [Info]    Property dcname: tablist
         [ddgen] [Info]    Property language: Available languages are automatically determined!
         [ddgen] [Info]    Property addpaths ...
         [ddgen] [Info]       SapMetamodelWebdynproContent.zip - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/bi/extmm/_comp/gen/default/public/def/lib/model
         [ddgen] [Info]       SapMetamodelDictionaryContent.zip - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/bi/extmm/_comp/gen/default/public/def/lib/model
         [ddgen] [Info]       worldbank.orgconnservpp_connserv.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/worldbank.org/connserv/_comp/gen/default/public/pp_connserv/lib/java
         [ddgen] [Info]       exception.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/com.sap.exception/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]       SapDictionaryTypeServices.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/ddic/ddicruntime/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]       SapDictionaryTypesRuntime.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/ddic/ddicruntime/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]       jrfc.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/com.sap.mw.jco/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]       SapMetamodelWebdynproContent.zip - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/wdp/metamodel/content/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]       aii_proxy_rt.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/com.sap.aii.proxy.framework/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]       cmiapi.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/cmi/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]       webdynproadmin.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]       webdynprobasesrvc.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]       webdynproclientserver.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]       webdynpromodelimpl.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]       webdynpromodel_dynamicrfc.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]       webdynpropdfobject.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]       webdynproprogmodel.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]       webdynproruntime_designtime_coupling.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]       webdynproruntime_designtime_coupling_api.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]       webdynproruntime_repository.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]       webdynproruntime_repository_pmr.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]       webdynproservices.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]       SapMetamodelDictionaryContent.zip - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/ddic/metamodel/content/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]       aii_util_misc.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/com.sap.aii.util.misc/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]       logging.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/logging/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]       logging.perf.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/logging/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]    Initialize generation templates from configuration jar:file:/usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/bi/extddic/_comp/gen/default/public/def/lib/java/SapDictionaryGenerationCore.jar!/DictionaryGenerationConfigurationCompiled.xml
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/__Miga__Origin.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/PackagePointer.java
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/__Miga__Inves_Id.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/__Miga__Ccy_Code.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/__Miga__Subm_Type.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/__Miga__Uw_Upi.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/__Miga__Guar_Holder.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/__Miga__Conver_Type.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/__Miga__Doc_Num.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/__Miga__Sic_Cde.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/__Miga__Rcvr_Type.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/__Miga__Notif_Sndr.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/__Miga__Notif_Rcvr.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/__Miga__Modified_By.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/Symsgid.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/__Miga__Status_Type.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/Bapi_Msg.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/__Miga__Inves_Ty.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/__Miga__Reason_Dt.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/__Miga__Stl_Upi.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/Balmnr.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/__Miga__Notif_Id.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/Bapi_Line.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/__Miga__Frcast_Chk.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/__Miga__Migeo_Upi.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/__Miga__Waiv_Flag.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/__Miga__Item_Num.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/Symsgno.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/__Miga__Status_Categ.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/__Miga__Mngmt_Gr.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/__Miga__Reg_Num.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/__Miga__Stat_Chng_Dt.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/__Miga__Migaorg_Code.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/__Miga__Rcvr_Grp.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/__Miga__Commnt_Eventtype.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/Bapi_Param.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/__Miga__Doc_Typ.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/__Miga__Stl_Comment.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/__Miga__Src_Upi.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/__Miga__Notif_Eventtype.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/Bapi_Mtype.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/__Miga__Sndr_Type.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/Bapi_Fld.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/__Miga__Commnt_Doctype.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/__Miga__Cmmt_User.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/Symsgv.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/__Miga__Sme_Share.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/__Miga__Description.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/Balognr.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/Bapilogsys.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/__Miga__Amount.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/__Miga__Status.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/__Miga__Reason_Type.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/__Miga__Comment_Id.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/__Miga__Time_Stamp.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/__Miga__Reason.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/__Miga__Miga_Source.gsimpletype
         [ddgen] [Info]    Generating datatypes/org/wb/operations/stl/types/__Miga__S_Doc_Typ.gstructure
         [ddgen] [Error]   Structure org.wb.operations.stl.types.__Miga__Appl is not generated
         [ddgen] [Error]   BuiltIn Type or Simple Type expected
         [ddgen] [Info]    Catching throwable null
         [ddgen] [Info]    com.sap.dictionary.generation.ant.GenerationAntTaskError
         [ddgen]      at com.sap.dictionary.generation.ant.GenerationAnt.showCheckResult(GenerationAnt.java:171)
         [ddgen]      at com.sap.dictionary.tools.generation.Generation.generatePersistentStructure(Generation.java:480)
         [ddgen]      at com.sap.dictionary.tools.generation.console.GenerationConsole.generate(GenerationConsole.java:168)
         [ddgen]      at com.sap.dictionary.generation.ant.GenerationAnt.main(GenerationAnt.java:47)
         [ddgen]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         [ddgen]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
         [ddgen]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
         [ddgen]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
         [ddgen]      at java.lang.reflect.Method.invoke(Method.java:391)
         [ddgen]      at com.sap.dictionary.generation.ant.DDGenAntTask.execute(DDGenAntTask.java:219)
         [ddgen]      at org.apache.tools.ant.Task.perform(Task.java:341)
         [ddgen]      at org.apache.tools.ant.Target.execute(Target.java:309)
         [ddgen]      at org.apache.tools.ant.Target.performTasks(Target.java:336)
         [ddgen]      at org.apache.tools.ant.Project.executeTarget(Project.java:1339)
         [ddgen]      at com.sap.tc.buildplugin.techdev.ant.util.AntRunner.run(AntRunner.java:115)
         [ddgen]      at com.sap.tc.buildplugin.AbstractAntBuildAction.execute(AbstractAntBuildAction.java:65)
         [ddgen]      at com.sap.tc.buildplugin.AbstractPlugin.handleBuildStepSequence(AbstractPlugin.java:226)
         [ddgen]      at com.sap.tc.buildplugin.AbstractPlugin.performBuild(AbstractPlugin.java:202)
         [ddgen]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         [ddgen]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
         [ddgen]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
         [ddgen]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
         [ddgen]      at java.lang.reflect.Method.invoke(Method.java:391)
         [ddgen]      at com.sap.tc.buildtool.PluginCommunicator.maybeInvoke(PluginCommunicator.java:114)
         [ddgen]      at com.sap.tc.buildtool.PluginCommunicatorV2.communicate(PluginCommunicatorV2.java:42)
         [ddgen]      at com.sap.tc.buildtool.PluginHandlerImpl.handlePluginCommunication(PluginHandlerImpl.java:354)
         [ddgen]      at com.sap.tc.buildtool.PluginHandlerImpl.execute(PluginHandlerImpl.java:176)
         [ddgen]      at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1726)
         [ddgen]      at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1498)
         [ddgen]      at com.sap.tc.buildcontroller.CBSBuildController.build(CBSBuildController.java:727)
         [ddgen]      at com.sap.tc.buildcontroller.CBSBuildController.execCommand(CBSBuildController.java:503)
         [ddgen]      at com.sap.tc.buildcontroller.CBSBuildController.evalCmdLine(CBSBuildController.java:442)
         [ddgen]      at com.sap.tc.buildcontroller.CBSBuildController.run(CBSBuildController.java:314)
         [ddgen]      at com.sap.tc.buildcontroller.CBSBuildController.exec(CBSBuildController.java:252)
         [ddgen]      at com.sap.tc.buildcontroller.CBSBuildController.mainLoop(CBSBuildController.java:207)
         [ddgen]      at com.sap.tc.buildcontroller.CBSBuildController.main(CBSBuildController.java:168)
         [ddgen] ERROR: Unknown exception during generation null (com.sap.dictionary.generation.ant.GenerationAntTaskError)
         [ddgen] ERROR: Generation failed due to errors (3 seconds)
    Ant runtime 5.593 seconds
    Ant build finished with ERRORS
    [Error]   Generation failed!
    Error: Build stopped due to an error: [Error]   Generation failed!
    Build plugin finished at 2008-03-14 10:09:32 GMT+00:00
    Total build plugin runtime: 10.143 seconds
    Build finished with ERROR

    I think the "," that comes in the flat file. CHange the number fields in the file from ",". If it has 1000 separator remove them. You need not have them in the file. In your case i think the decimals are coming as ",". In that case change your user settings for decimal places and then try to load.
    Hope this helps

  • Activation Failed

    I have a library project and an External Library project, both which build successfully.  In fact the application that uses these runs successfully on one server.  These projects were built on an NWDI Track and there is an activity for each (Create Library and Create External Library).  Both activities are checked in and available in the activation view. 
    I first tried to activate the External Library as it has no predecessors.  The build was successful but the activation failed.  I thought maybe I needed to activate them at the same time so I tried to activate the Create Library - it has one predecessor (Create External Library) - I selected Activate with all Predecessors.  Still Fails.
    This is what the activation log says:
    REQUEST PROCESSING started at 2009-03-03 14:44:05.770 GMT
        ACTIVATION request in Build Space "JP1_EPPHASE1_D" at Node ID: 3,431,550
         [id: 270; parentID: 0; type: 4]
         [options: FORCE ACTIVATE PREDECESSORS, IGNORE COMPONENT INTERSECTION]
        Waiting for access: 4 ms
        ===== Pre-Processing =====  started at 2009-03-03 14:44:05.774 GMT
            List of requested for activation activities:
                'mc.com_TRACK_1' compartment
                    Edit XML Library
                        [ISN 217][created by M100236 at 2009-03-03 09:43:48.0][OID f2562c82b03211ddc1689ad54e639164]
                There is 1 activity in compartment mc.com_TRACK_1
                1 activity will be processed by this request
            Analyze dependencies to predecessor activities... started at 2009-03-03 14:44:05.783 GMT
                Analyzing predecessors in compartment "mc.com_TRACK_1"
                    2 not activated predecessors are detected
                    The following activities are being added to request:
                    "Create XML External Library"   [seq. no 145][created by M100236 at 11/11/08 2:05 PM][ID bdae3201b01311ddac1e9ad54e639164]
                    "Create XML Library"   [seq. no 146][created by M100236 at 11/11/08 3:21 PM][ID 5cedb8ccb02311dd9f7d9ad54e639164]
                    The following DC is to be added to compartment mc.com_TRACK_1:
                    "mc.com/xml_eLib"
            Analyze dependencies to predecessor activities... finished at 2009-03-03 14:44:05.811 GMT and took 28 ms
            Analyze versions... started at 2009-03-03 14:44:05.811 GMT
                List Active Versions Report: "HTTP/1.1 207 Multi-Status" finished at 2009-03-03 14:44:05.914 GMT and took 103 ms
                Resource "/SCs/mc.com/MC/_comp/TopLevelDCs/mc.com xml_eLib.dcref" is not relevant for DC build and will be ignored. Reason: Invalid DC URL '/SCs/mc.com/MC/_comp/TopLevelDCs/mc.com xml_eLib.dcref'. URL does not point to DCs root directory.
                Resource "/SCs/mc.com/MC/_comp/TopLevelDCs/mc.com xml_lib.dcref" is not relevant for DC build and will be ignored. Reason: Invalid DC URL '/SCs/mc.com/MC/_comp/TopLevelDCs/mc.com xml_lib.dcref'. URL does not point to DCs root directory.
                < IGNORE > 'mc.com/xml_eLib' DC
                Synchronize metadata for [mc.com/xml_elib] started at 2009-03-03 14:44:05.980 GMT
                    Verification of DL [ws/EPPHASE1/mc.com_MC/dev/active/] finished at 2009-03-03 14:44:05.997 GMT and took 7 ms
                    Verification of cache (level 2: Comparison of attributes) finished at 2009-03-03 14:44:06.009 GMT and took 12 ms
                Synchronize metadata for [mc.com/xml_elib] finished at 2009-03-03 14:44:06.009 GMT and took 29 ms
                < CREATE > 'mc.com/xml_elib' DC
                Synchronize metadata for [mc.com/xml_lib] started at 2009-03-03 14:44:06.033 GMT
                    Verification of DL [ws/EPPHASE1/mc.com_MC/dev/active/] finished at 2009-03-03 14:44:06.047 GMT and took 6 ms
                    Verification of cache (level 2: Comparison of attributes) finished at 2009-03-03 14:44:06.059 GMT and took 12 ms
                Synchronize metadata for [mc.com/xml_lib] finished at 2009-03-03 14:44:06.059 GMT and took 26 ms
                < CREATE > 'mc.com/xml_lib' DC
            Analyze versions... finished at 2009-03-03 14:44:06.059 GMT and took 248 ms
            Analyze activities... started at 2009-03-03 14:44:06.059 GMT
                Loading component definitions
                DC Metadata inconsistency detected: Registered DC vendor/name "mc.com/xml_elib" does not correspond to "mc.com/xml_eLib" declared in the DC definition
                Removing component "mc.com/xml_eLib" from request 270. A component with this name has not yet been created or activated.
                2 components to be build in compartment "mc.com_TRACK_1"
            Analyze activities... finished at 2009-03-03 14:44:06.077 GMT and took 18 ms
            Calculate all combinations of components and variants to be built...
            Analyze request DC BV... started at 2009-03-03 14:44:06.083 GMT
                    'mc.com/xml_elib' variant 'default'
                    'mc.com/xml_lib' variant 'default'
                    'mc.com/xml_lib' variant 'default' cannot be built. ACTIVATION will fail.
                    INVALID dependency is declared
                    DC 'mc.com/xml_lib' in SC 'mc.com_TRACK_1' USES Non-existing DC 'mc.com/xml_eLib' [public-part: XMLAssembly] AS Build-Time Dependency  [validity: USED COMPONENT OR PUBLIC PART IS UNKNOWN OR UNDEFINED]
            Analyze request DC BV... finished at 2009-03-03 14:44:06.118 GMT and took 35 ms
        ===== Pre-Processing =====  finished at 2009-03-03 14:44:06.120 GMT and took 346 ms
        Change request state from PROCESSING to FAILED
        Error! The following problem(s) occurred  during request processing:
        Error! The following error occurred during request processing:Activation failed due to component "mc.com/xml_lib" variant "default". The component is BROKEN.
    REQUEST PROCESSING finished at 2009-03-03 14:44:06.129 GMT and took 359 ms
    So I can understand there is a problem - but the activities are checked in and I cannot modify them so I am unsure how to fix this issue.  I thought maybe create a new activity and just checkin the project from scratch but that isn't an option as these are always seen as predecessors.  I really need to get these activated and released to the next server so any tips are appriciated.

    I did a sync on the Track and am now receiving a different error:
    REQUEST PROCESSING started at 2009-03-03 15:11:59.292 GMT
        ACTIVATION request in Build Space "JP1_EPPHASE1_D" at Node ID: 3,431,550
         [id: 273; parentID: 0; type: 4]
         [options: FORCE ACTIVATE PREDECESSORS, IGNORE COMPONENT INTERSECTION]
        Waiting for access: 16 ms
        ===== Pre-Processing =====  started at 2009-03-03 15:11:59.308 GMT
            List of requested for activation activities:
                'mc.com_TRACK_1' compartment
                    Create XML Library
                        [ISN 146][created by M100236 at 2008-11-11 15:21:14.0][OID 5cedb8ccb02311dd9f7d9ad54e639164]
                There is 1 activity in compartment mc.com_TRACK_1
                1 activity will be processed by this request
            Analyze dependencies to predecessor activities... started at 2009-03-03 15:11:59.312 GMT
                Analyzing predecessors in compartment "mc.com_TRACK_1"
                    1 not activated predecessor is  detected
                    The following activities are being added to request:
                    "Create XML External Library"   [seq. no 145][created by M100236 at 11/11/08 2:05 PM][ID bdae3201b01311ddac1e9ad54e639164]
                    The following 2 DCs are to be added to compartment mc.com_TRACK_1:
                    "mc.com/xml_elib"
                    "mc.com/xml_eLib"
            Analyze dependencies to predecessor activities... finished at 2009-03-03 15:11:59.339 GMT and took 27 ms
            Analyze versions... started at 2009-03-03 15:11:59.339 GMT
                List Active Versions Report: "HTTP/1.1 207 Multi-Status" finished at 2009-03-03 15:11:59.436 GMT and took 97 ms
                Resource "/SCs/mc.com/MC/_comp/TopLevelDCs/mc.com xml_eLib.dcref" is not relevant for DC build and will be ignored. Reason: Invalid DC URL '/SCs/mc.com/MC/_comp/TopLevelDCs/mc.com xml_eLib.dcref'. URL does not point to DCs root directory.
                Resource "/SCs/mc.com/MC/_comp/TopLevelDCs/mc.com xml_lib.dcref" is not relevant for DC build and will be ignored. Reason: Invalid DC URL '/SCs/mc.com/MC/_comp/TopLevelDCs/mc.com xml_lib.dcref'. URL does not point to DCs root directory.
                < IGNORE > 'mc.com/xml_eLib' DC
                Synchronize metadata for [mc.com/xml_elib] started at 2009-03-03 15:11:59.483 GMT
                    Verification of DL [ws/EPPHASE1/mc.com_MC/dev/active/] finished at 2009-03-03 15:11:59.497 GMT and took 7 ms
                    Verification of cache (level 2: Comparison of attributes) finished at 2009-03-03 15:11:59.516 GMT and took 19 ms
                Synchronize metadata for [mc.com/xml_elib] finished at 2009-03-03 15:11:59.516 GMT and took 33 ms
                < CREATE > 'mc.com/xml_elib' DC
                Synchronize metadata for [mc.com/xml_lib] started at 2009-03-03 15:11:59.541 GMT
                    Verification of DL [ws/EPPHASE1/mc.com_MC/dev/active/] finished at 2009-03-03 15:11:59.557 GMT and took 9 ms
                    Verification of cache (level 2: Comparison of attributes) finished at 2009-03-03 15:11:59.576 GMT and took 19 ms
                Synchronize metadata for [mc.com/xml_lib] finished at 2009-03-03 15:11:59.576 GMT and took 35 ms
                < CREATE > 'mc.com/xml_lib' DC
            Analyze versions... finished at 2009-03-03 15:11:59.576 GMT and took 237 ms
            Analyze activities... started at 2009-03-03 15:11:59.577 GMT
                Loading component definitions
                DC Metadata inconsistency detected: Registered DC vendor/name "mc.com/xml_elib" does not correspond to "mc.com/xml_eLib" declared in the DC definition
                Removing component "mc.com/xml_eLib" from request 273. A component with this name has not yet been created or activated.
                2 components to be build in compartment "mc.com_TRACK_1"
            Analyze activities... finished at 2009-03-03 15:11:59.587 GMT and took 10 ms
            Calculate all combinations of components and variants to be built...
            Analyze request DC BV... started at 2009-03-03 15:11:59.593 GMT
                    'mc.com/xml_elib' variant 'default'
                    'mc.com/xml_lib' variant 'default'
            Analyze request DC BV... finished at 2009-03-03 15:11:59.643 GMT and took 50 ms
            Prepare build environment in the file system... started at 2009-03-03 15:11:59.643 GMT
                Synchronize development configuration... started at 2009-03-03 15:11:59.644 GMT
                Synchronize development configuration... finished at 2009-03-03 15:11:59.646 GMT and took 2 ms
                Synchronize sources for [mc.com/xml_elib] started at 2009-03-03 15:11:59.649 GMT
                    Verification of DL [ws/EPPHASE1/mc.com_MC/dev/active/] finished at 2009-03-03 15:11:59.667 GMT and took 8 ms
                    Verification of cache (level 2: Comparison of attributes) finished at 2009-03-03 15:11:59.696 GMT and took 29 ms
                Synchronize sources for [mc.com/xml_elib] finished at 2009-03-03 15:11:59.696 GMT and took 47 ms
                Synchronize sources for [mc.com/xml_lib] started at 2009-03-03 15:11:59.722 GMT
                    Verification of DL [ws/EPPHASE1/mc.com_MC/dev/active/] finished at 2009-03-03 15:11:59.737 GMT and took 7 ms
                    Verification of cache (level 2: Comparison of attributes) finished at 2009-03-03 15:11:59.777 GMT and took 40 ms
                Synchronize sources for [mc.com/xml_lib] finished at 2009-03-03 15:11:59.778 GMT and took 56 ms
                Synchronize used libraries... started at 2009-03-03 15:11:59.793 GMT
                Synchronize used libraries... finished at 2009-03-03 15:12:00.665 GMT and took 872 ms
            Prepare build environment in the file system... finished at 2009-03-03 15:12:00.665 GMT and took 1 s 22 ms
        ===== Pre-Processing =====  finished at 2009-03-03 15:12:00.665 GMT and took 1 s 357 ms
        Waiting for access: 3 ms
        ===== Processing =====  started at 2009-03-03 15:12:00.669 GMT
            BUILD DCs
                'mc.com/xml_elib' in variant 'default'
                        'XML_Assembly' PP has been changed. Dependent DCs will be re-built.
                        'XML_Component' PP has been changed. Dependent DCs will be re-built.
                    The build was SUCCESSFUL. Archives have been created.
                'mc.com/xml_lib' in variant 'default'
                        'defLib' PP has been changed. Dependent DCs will be re-built.
                    The build was SUCCESSFUL. Archives have been created.
        ===== Processing =====  finished at 2009-03-03 15:12:11.953 GMT and took 11 s 284 ms
        ===== Post-Processing =====
        Waiting for access: 7 ms
        ===== Post-Processing =====  started at 2009-03-03 15:12:11.960 GMT
            Check whether build was successful for all required variants...
                "mc.com/xml_elib" in variant "default"   OK
                "mc.com/xml_lib" in variant "default"   OK
            STORE activation build results... started at 2009-03-03 15:12:11.961 GMT
                Update DC metadata... started at 2009-03-03 15:12:11.961 GMT
                    'mc.com/xml_elib' DC is CREATED
                    'mc.com/xml_lib' DC is CREATED
                Update DC metadata... finished at 2009-03-03 15:12:12.040 GMT and took 79 ms
                STORE build results... started at 2009-03-03 15:12:12.040 GMT
                ===== Post-Processing =====  finished at 2009-03-03 15:12:12.041 GMT and took 81 ms
                Change request state from PROCESSING to FAILED
                Error! The following problem(s) occurred  during request processing:
                Error! The following error occurred during request processing:I/O error:Failed to persist the assembly
    Assembly: [binary ID: [B@35193519]
         [bsID: 27, scID: 101, dcID: 304, bvID: 101, ppName: "XML_Assembly"archive type: "PP Archive", build number: 259]
         temporary location in: /usr/sap/JP1/DVEBMGS00/j2ee/cluster/server0/temp/CBS/1b/.B/259/DCs/mc.com/xml_elib/tmp of the PPBV
    Build Variant "default" of Compartment "mc.com_TRACK_1"
         [bvID: 101, scID: 101, required for activation: true] OF Build variant default of
    Development Component
         "mc.com/xml_elib" in compartment "mc.com_TRACK_1" attached to request 273
         [scID: 101, dcID: 304, parent dcID: 0, current state: OK, action: CREATED]
         Build Number: (last successful: 259, last known 259)
         Original Cause: PPA not found! Expected location:
    /usr/sap/JP1/DVEBMGS00/j2ee/cluster/server0/temp/CBS/1b/.B/259/DCs/mc.com/xml_elib/_comp/gen/default/public/XML_Assembly.ppa
            REQUEST PROCESSING finished at 2009-03-03 15:12:12.084 GMT and took 12 s 792 ms

  • Want to delete all the mails in the mail box configured for BPM Portal

    Hi All,
    Do you have idea to perform this activity.
    I want to delete all the mails in the Dev mail box configured for BPM Portal.
    Server and mailbox details as given below :
    Mail a/c = Y00123
    Mail server = sap.mail.com
    Thanks, Sanjay

    http://java.sun.com/developer/onlineTraining/JavaMail/contents.html
    http://www.jguru.com/faq/view.jsp?EID=17035
    if you know the password of the account, i think you can also access the mail using mail client, like you use outlook to deal with your company mail daily.

  • Activation Failure for Creative Suite 5.5 Web Premium Subscription

    Hi,
    Signed up for the subscription model a week ago and worked fine without issue; came in to work on Monday and was asked to activate photoshop; it failed but let me continue. Tried loading up photoshop again today but now it says can't continue without activating.
    Contacted customer support who took all of my details only to come to the conclusion that it was a technical issue and I had to ring technical support.
    Rung technical support and after a long conversation explaining the issue; them taking over and sharing my sceren came to the conclusion that even though I can't "ping activate.adobe.com" that I should re install the entire suite.
    I uninstalled the suite using the built in uninstaller. restarted. and then re installed. First use works fine; second use presents the activation error. Giving me the same error code before "194:104".
    I downloaded the Adobe support application which appears to have just read a bunch of log files and shows the same 194:104 error appearing throughout; trying to click on further details for any of these items just gives a 404 error.
    I uninstalled a further time (again using the proper uninstaller), restarted and re installed and fired up flash; let me in the first time and I went through to Help and clicked "Deactivate" and deactivated the entire suite; restarted flash and this time selected the 30 day trial. Yay. finally somthing that works!! After testing all the apps fire up again; I closed them all down and opened flash again this time entering my serial number.
    Again I got the activation failed (194:104) error and now I can't open anything again -- not even to de activate it;
    Still pinging "activate.adobe.com" or the "activate.wip4.adobe.com" results in a request timed out.
    I've tried turning off the firewall in OSX and disabling other network filtering tools, no change.
    I've tried logging in as a fresh user and still the same issue.
    Also tried booting into Safe mode to ensure nothing else was running and still get the same activation error and still no reply from activate.adobe.com
    So far; my only course of action is to uninstall again and select 30 day trial to avoid losing a full days work...
    Doncha just love DRM...
    Chris

    After 3 weeks I find it hilarious that something as simple as activation has taken this long to get to the point where _somebody_ is actually looking at it; The countless hours I've wasted talking to support asking me to uninstall, re install, re download, re dowload again, uninstall, reinstall, on hold etc etc has been absoltely rediculous. I said right from the first conversation "I've tried this on two completely seperate machine and it does the same thing, I think there's a problem with your server" and nobody listened until now; And even then the log files went missing, another week passed, then nothing again... not impressed with support at all!
    I just hope this can be resolved within the next couple of days as my trial period is now coming to an end and I'll not only be left with something I can't use but also paying for something I can't use either. Apparently I can't even cancel my subscription or else I won't be able to sign up again for the discounted yearly rate! Talk about holding me over a barrel...
    Very disapointed I couldn't have just gotten a new serial number or new account like I'd asked for when I first reported this and each and every time I was on the support calls; Not sure why I have to be the "guinnie pig" in sorting out this issue... an issue regarding basic activation; and companies wonder why we hate DRM; this is why. because when there's an issue the customer ends up being the one who loses out.
    Not trying to make this personal in any way; just a bit disgraced at a company as big as Adobe can fail so mierably at such a simple issue and take soooo long to fix it.
    A very annoyed customer,
    Chris

Maybe you are looking for

  • Windows 7 Update Error Code 800706f7

    I am unable to update Windows 7 Home Premium on this machine. Apparently the problem started in Dec. 2014, but I noticed it recently, when I started getting the messages that my Windows copy was not genuine. I have gone through all the suggestions po

  • I am currently using the iPhone 5 ( Verizon ) to text another non-smartphone ( AT

    As the question stated, that's pretty much the problem. At the end of most messages the receiving phone is getting messages with the @ sign at the end. Not sure exactly what the problem is. I appreciate the help greatly. Thanks!

  • Thread Process is exiting without completing the process in SharePoint 2010 webpart

    We have implemented simple thread to process to excel upload into SharePoint 2010 custom list. Thread process running in local SharePoint 2010 environment (OS -Windows 7). Once we deployed in SharePoint server, Thread process is exiting without compl

  • WSDL to ABAP in 620 versus WSDL to ABAP in 640

    Can I say that <b>If WAS 640:</b> Then its pretty staigtforward to convert the WSDL to ABAP via proxy object generation but <b>If WAS 620</b>: Then we need to write code in XSLT which will parse the WSDL to  build the SOAP message and then the output

  • Loading a module with the force flag in /etc/rc.conf

    I'm in a situation where I have to load a module forcing it (# modprobe -f coretemp) it make it work.  How can I do this in the module array in /etc/rc.conf or is it not possible?  I think that I can add a line to /etc/rc.local to do it.