Activity in Portal (partner determination)

Hi Guys,
I access to Portal to Activity management in Portal.
When I try to access to Create an activity and this activity has configured partner determination procedure. THe system run the determination and show the message " Partner available for selection ", but never show the windows for select the partner.
Any idea?
Regards,
Lyda

Run again the generation of screen for Portal in SAP CRM SPRO

Similar Messages

HEY GUYS!! SMALL QUESTION REGARDING PARTNER DETERMINATION IN AN ACTIVITY

FRIENDS,
I WANT THAT I SHUD BE ABLE TO ENTER THE BP NO OF THE ORG UNIT IN A PARTNER FUNCTION AND I AM ABLE TO DETERMINE THE EMPLOYEES RESPONSIBLE. FOR THIS I HAVE FOLLOWED THE PROCESS BELOW. BUT I HAVE BEEN UNABLE TO GET IT. PLZ HELP ME...............
Created a partner function responsible org unit with function category organization responsible and without relationship category
Created one access sequence responsible org unit  resp employee with source BP relationships and assigned the partner function responsible org unit in the source of this access sequence.
Assigned the partner functions responsible org unit and employee responsible to the partner det. Procedure.
Assigned the access sequence responsible org unit  resp employee to the partner function employee responsible.
Maintained blank access sequence for partner function responsible org unit as the org unit is not to be determined automatically.
In the Master data of the org unit maintained the employees under relationship has employee responsible.
NOW WHILE CREATING THE ACTIVITY AFTER GIVING THE BP NO. OF ORG UNIT FOR THE PART. FUNC. responsible org unit THE PARTNER FUNC EMPLOYEE RESP SHUD BE DETERMINED BUT ITS NOT HAPPENING.
I PROMISE THAT POINTS WILL BE GIVEN TO ALL THE HELPFUL ANSWERS
JAI

hi pratik,
let me further clarify my question,
I dont want to give my org units in the organization tab rather in one of the partner functions. That is why i created one partner function resp. org unit with category organization responsible. Then i have attached the employees under relationship 'employees responsible' to the org units. Then i assign the access sequence with source 'bp relationship' and source partner function 'resp org unit' to the partner function employee resp. in the partner determination procedure.
IN SHORT I AM TRYING TO GIVE ONE PARTNER FUNCTION MANUALLY AND TRYING TO DETERMINE THE PARTNER FUNCTIONS AUTOMATICALLY USING THE BP RELATIONSHIPS. please give me the way.
thanks,
jai.

Territory and partner determination procedure for employee responsible

Hi CRM team,
I have a little issue for you I'll be very thankfull if someone could help me.
There is the organisation of the territory management in the company I'm working for:
-Country
-Region
-sector
*each sector have a determination rule based on 1 condition "1 field from the BP Header (customer)"
*each sector have a position assigned to it. (Organisational model PPOMA_CRM) And there is 1 or 2 employee affected to each position..
*When creating an activity,*
*First thing I enter the Account (customer: activity partner)*
*I would like the system to determine the employee affected to the sector of the BP as the employee responsible.*
Any Idea?
For the moment, I'm searching in the partner determination procedure. But the standard access sequence Business Partner Relationships: Activity Partner -> User dont work.
There is some sitting from my IMG:
The partner fonction Employee Responsible is with
*fonction category: employee
*usage: CRM
*Relationship category: Is the employee responsible for
Partner determination procedure:
In the acces sequence, I put a dialogue seq 15 :
Business partner from territory
And in the detail on source, I put:
Fonct. categ. : Employee
Usage: CRM
It dosn't work...
I don't know if I'm am searching in the right place.
Could you help me with a solution to have the needed system behavior????
Thanks a lot for your time and your help.
Best regards,
Ahmed.

Hi Ahmed,
After created determination rules for territories have executed the report CRM_TERRMAN_PROC_REL for initial option?
Once territories and determination rules are created, you need to run the above report in Background(schedule a batch job) which will establish relationships between the territories and corresponding attributes. You need to run this report every time there is a change in determination rule of create/change territories.
This should resolve your problem
Regards,
Priyanka

"Partner Determination Steps for Customer Master" clarification

Hi,
Let me clear myself at the outset itself, that I searched SDN for my below mentioned query, however I could not find any answer to my satisfaction....here I am posting again
In "Partner Determination for Customer Master", the following steps are undertaken -
Step 1:
1.a.) Create New Partner Determination Procedure
1.b.) For each Partner Determination Procedure, different Partner Functions, which are applicable for that specific determination procedure, are assigned. (along with other properties like if the PF is mandatory, not modifiable )
Step2:
"Partner Determination Procedure Assignment", here we assign different Partner Determination Procedure to different Account Groups. In other words, indirectly, we assign the partner functions to account groups. Right? (Please correct me if I am wrong)
Step3:
"Partner Function". Here we define new partner functions, (which are used in Step 1...)
Step4:
"Account Group- Function Assignment" - Here we assign the Partner Functions to Account Groups
Now My Question
(A) Since the Partner Functions are assigned (via partner determination procedure) to account groups in Step 1, then why Partner Functions are assigned AGAIN to account groups in Step 4. What is the significance of this assignment in Step 4.
(B) Is there is particular sequence of Steps (1 to 5), one should follow when somebody has to create new customer account group and/or new partner function.
Thanking you all in advance.

Dear SR
Leave SAP Partner Determination screen for 2 minutes and first understand the logic
1. Create the new partner functions
2. Create the new determination procedure
3. Link the new partner functions to the new determination procedure and add mandatory, non modifiable ,optional creteria
4. Assign the new determination procedure to the document type or account group at appropriate level
This is essence and this is for all 8 levels like CMR,sales doc header,item etc
Now coming to your qn
When you define a new account group ( you might be aware account group controls partner functions of CMR) you will say that your new account group will carry out patner functions like SP,SH,BP,PY
That is ACCOUNT GROUPS function assignment
Whenever you create a new account group you will do field selection in OBD2 like suppress optional.reqd etc,create no ranges and assign no ranges and also mainly this activity partner determination
These are must settings for a new account group
AG is the german key for sold to party Partner determination procedure
This is step 1
Then in next step you will tell AG will carry out such and such partner functions Step 2 like mandatory not modifiable etc
Step 3 is link the AG to your account group
Step 4 is partner functions say if you want to create a new partner function say SB special stock partner
(in concept this is the firststep)
Step 5 is once again partner function account group assignment
So when you create a new partner function you will do step 4 first and step 5 and then 1 and 2 and 3
when you create a new account group you will do step 5 and then 1 and 2 and 3
Hope you understand now
Partner functions are relatives in your family
Say in a family we have Father ,mother sister, brother (these 4 partner functions)
This is called as Happy Family and this Happy Family is the Partner determination procedure in SAP
This Happy Family is linked to the account group
So Happy family means there are 4 partner functions
So whenever you create a CMR in the account group this father.mother,brother,sister will come as default
Suppose you add another partner function say Uncle
First you have to create uncle
Then you have to tell this account group will accept uncle
Then link the uncle in the happy family that is determination procedure of SAP along with the 4
Then assign happy family to the account group
Now when you create a CMR along with father.mother,brother,sister along with that uncle will also come
Regards
Raja

Partner determination procedure

Hi,
This is for the 1st time i am in this forum.
Could anyone tell about when the error comes (during creation of sales document-customer master record does not exist), though i have created my own partner determination procedure with new part functions & created cmr successfully too.
Regards,
Dash

Have you created Customer Master Data?
Steps to create Customer master data:
2.1.2 Process to Create Customer Master
2.1.2.1 Initial Screen of Customer Master Maintainance
Use
The purpose of this activity is to maintain Customer Master Data. Customer Master Can be created for Sales & Distribution, in which it will be possible to maintain General Data Tab & Sales Area Tab. Alternatively it is also possible to maintain Complete / FI, in which it is possible to maintain General Data, Company Code Data & Sales Area Data (Complete) or General Data & Company Code (F1)
Procedure
1. Access the activity using one of the following navigation options:
SAP Easy Access > Logistics > Sales and Distribution > Master Data > Business Partner > Customer > Create > Sales and Distribution / Complete
Transaction Code: VD01 / XD01
Fields to be maintained in Initial Screen (referring Complete):
Field Functionality
Account Group - Take a drop down & select appropriate Account Group (Say, Sold To Party)
Customer - Enter manually / Internal by system (Based on Configuration)
Company Code - Take a drop down
Sales Organization - Take a drop down
Distribution Channel - Take a drop down
Division - Take a drop down
A Customer can be created with reference to an existing Customer & necessary data can be changed.
Reference
Field - Functionality
Customer Enter manually
Company Code - Take a drop down
Sales Organization -Take a drop down
Distribution Channel - Take a drop down
Division - Take a drop down
2.1.2.2 General Data of Customer Master Maintenance
Use
The purpose of this activity is to maintain General Data. General Data is applicable to the customer centrally. Incase of extending Customer to another Sales Area, General data will remain the same.
Procedure
 Fields to be maintained are as under:
ADDRESS
Field - Functionality
Title Take a drop down
Name - Enter manually
Search Term - Enter Manually (Optional)
Street - Enter Manually (Optional)
House No - Enter Manually (Optional)
Postal Code - Enter manually
City - Enter manually
Country - Take a drop down
Region - Take a drop down
Control Data
Field - Functionality
Vendor - Enter Manually (Optional) To establish Customer Vendor Relationship.
Trading Partner - To be maintained incase of Inter-company Customer,
The above is for Illustration purpose. Please ensure to maintain the fields required.
2.1.2.3 Company Code Data of Customer Master Maintenance
Use
The purpose of this activity is to maintain Company Code Data. This is maintained by an FI person.
Procedure
 Fields to be maintained are as under:
Account Management
Field - Functionality
Recon. Account - Take a drop down (Mandatory)
Payment Transaction
Field - Functionality
Terms of payment - Take a drop down.
The above is for Illustration purpose. Please ensure to maintain the fields required.
2.1.2.4 Sales Area Data of Customer Master Maintenance
Use
The purpose of this activity is to maintain Company Code Data. This is maintained by an FI person.
Procedure
 Fields to be maintained are as under:
Sales
Field - Functionality
Sales Office - Take a drop down
Currency - Maintain the local / export currency.
Exch. Rate Type - Maintain M, incase of export / inter-company(if required) only.
Cust. Pric. Proc - This is maintained to pick the pricing procedure in Sales Order & Billing Document. It should always be maintained.
Customer Stat. Gr - This is recommended to be maintained to enable the data to flow to SAP standard report.
Shipping
Field - Functionality
Delivery Priority - Take a drop down & maintain the appropriate for Delivery purpose.
Order Combination - Maintain the tick
Shipping Condition - Take a drop down & maintain the appropriate for Delivery purpose.
Delivery Plant - Take a drop down & maintain the appropriate Plant.
Billing
Field - Functionality
Incoterm - Take a drop down & select. Maintain the Description manually.
Terms of payments - Take a drop down & select.
Account assignment Group - Take a drop down & maintain the appropriate. This is very important to be maintained, else it will give an error to release the billing document to accounting.
Tax - Take a drop down & select 0.
The above is for Illustration purpose. Please ensure to maintain the fields required.
Regards,
Rajesh Banka
Reward points if Helpful.

Partner Determination in PO and OBDLV

Hey @ all,
what I am trying to do right now is to implement a simple, customer specific partner determination procedure. For that I want to add a partner role and partner to an purchase order on header level.
The only place I found where I could add this partner is in BAPI_PO_CREATE1. But this BAPI is not used when I create a PO with the GUI (ME21N).
So do you have an idea, where I could add a an additional partner to the PO (User-Exit, Badi, Enhancement Spot ...)?
The same thing I want to do with the outbound delivery (VL01N). There is User-Exit MV50AFZ1 available. But there is the question: How do I add a partner within this user exit (structures to edit...).
Thanks for you help in advance,
Rolf
Edited by: Rolf Kasel on Mar 10, 2010 1:57 PM

Hi,
   If its specific to plant and vendor, then check whether the plant specific partner function has been activated.
   Go to MK02 - partner function and go to menu - extras - Add. purchasing data and check whether "Data retent. at plant level allowed" flag is marked as shown below.
   If so, go to menu - extras - Alternative data.
Click on partner details:
Here, system will show plant specific partners.
   Here, maintain the partner function PI for the plant and check the scenario again.
Another option would be to maintain the higher level search flag in the partner function configuration as highlighted below:
   Now, system will search partners at purchase organization level, if no partner function is found at plant level.
Regards,
AKPT

Unable to find any active legal regulations for determination proc. "TEST1"

Hi Guys
This is in regards to a Customs document for a Payment doc
We have just finished the configuration of the Finance integration which will stop blocked partners during the Payment run
Now when we create a Proposal in the Payment run in ECC, the same document gets transferred to GTS, now even though the SPL is active when we check the Log there is a message Unable to find any active legal regulations for determination proc
Upon further investigation of the customs document i found 2 things
1) In the Geography section Country of Departure is populated with US, but the Country of destination is blank, this might be a reason as the Legal regulation checks both the countries and then activate, any idea how i can get the same to populate?
2) If the above population does happen, from which partner type should it come from, as in my customs document only Vendor and Bank is there, in the PO customs document this is being populated properly
Any idea what is wrong here?
Thanks
Carl

Hi Dave
Thanks for answering again.
I have tried activating it at country level, country/country, country/group, Same result in case of all
As i know now since the Country of Destination is missing, it cannot activate the last two, but the same is also not working at country level.
So is there anyway to maybe have some partner function which can populate the Destination country.
Any other advice will be really helpful..
Thanks
Carl

Simple doubt in partner determination procedure

Hi gurus,
I have a problem with a partner determination procedure. I need that a marketing campaing has a partner determination procedure in which Responsible Person will be mandatory with two assignments.
In my partner determination procedure I select 2 as minumun value but the marketing campaing allows only one Responsible Person assigment.
It's possible to make a partner function mandatory with a minimun number of partners?
Thanks in advance.
Javier Merino

hi guys
i have a query regarding access sequence in partner determination in SAP CRM.problem is that when i am trying to create a partner determination procedure using access sequence
Business Partner Relationship->Activity Partner->User
having three partner functions :
Sales Prospect
Contact Person
Person Responsible
there is deadloack arising in contact person and person responsible i.e. partner function is not being determined using the above access sequence
i have maintained same relationship categories.please tell me whether deadlock is a problem or not because my main concern is when i am trying to run Lead using above mentioned partner determination procedure i am not able to run the LEAD.for instance ideally what should be happening is :
there are three blank boxes
one of contact person ,another of person responsible and finally of sales prospect.now since i have defined the BP relationship,so using above determination procedure what shoulod be happening is that if
m writing any BP no. in sales prospect then conatct person should be dispalyed automatically because of the relationship i have maintained in BP.
but its not happening ,i have to fill each entriers manually
please guide me to some solution
hoping of an immediate help to a silly problem which i guess m able to define appropriately
thanks & regards
ashish

HOW TO USE ZONE ADRC-REGIOGROUP for Partner determination in opportunity

Hi Everyone,
We have an issue link to partner determination.
We need to determine employee function from the address of the sold-to-party activity person function.
In fact the REGIOGROUP field within the selected address in the opportunity is what we need to determine the employee function.
In the meantime we created the attribute REGIOGROUP in the Tcode PPOMA_CRM and we assigned a value to an orgdata.
We couldn't find any rules or function or Badi that does the link between the regiogroup of the address of the activity person and the attribute with same regiogroup value in orgdata in order to have the employee that works in the regiogroup.
Do you have any clue about the way to use this regiogroup?
When we press F1 on the REGIOGROUP field here is documentation we have:
"Regional structure grouping
Regional structure grouping combines all elements of the regional structure (cities, streets, street sections). It is used, for example, for clerk determination."
Does anybody know how to make this clerk determination work? do you know where i could find information about it?
Many Thanks
Laurent Monza

Laurent,
You can implement the BADI COM_PARNTER_BADI and one of the methods
DETERMINATION_ADD_IN
Then you create a new access sequence that uses the exit as the source and assigned that to your partner determination procedure.
Good luck,
Stephen

Which access sequence of Partner determination should be used?

Now my company is upgraded from CRM 2.0c to CRM 5.0 HR1. I found the different result about partner determination on business activity (via transaction code: CIC0) between two version.
On CRM 2.0C
Tcode: CIC0
Enter sold-to party code: 5300001 as activity partner, Contact person:244 on 'BP searching' workspace. Then on 'Maintain Business Transaction' workspace will display 5300001 as activity partner and 244 as Contact person.
Configuration:
Partner Function: 00000015 Contact person (CRM) using Access sequence 0002
Access sequence 0002 from activity partner
Dialog seq:10 has partner origin COM_PARTNER_A Preceding document and mark 'Determine in incorrect source partner'.
Dialog seq:20 has partner origin CRM_PARTNER_D General business partner model and have origin details; Partner Function category '0006 Activity partner' and Usage 'CRM'.
CIC0 of CRM 5.0 HR1
Tcode: CIC0
Enter sold-to party code: 5300001 as activity partner, Contact person:244 on 'BP searching' workspace. Then on 'Maintain Business Transaction' workspace will display 5300001 as activity partner and 66 as Contact person (66 is the first contact person of sold-to party master record:5300001).
Configation:
Partner Function: 00000015 Contact person (CRM) using Access sequence 0002
Access sequence 0002 from activity partner
Dialog seq:10 has partner origin COM_PARTNER_A Preceding document and mark 'Allow Incorrect Source'.
Dialog seq:20 has partner origin CRM_PARTNER_D DO NOT USE - General business partner model and have details on the source; Partner Function category '0006 Activity partner' and Usage 'CRM'.
Dialog seq:30 has partner origin CRM_PARTNER_C Business Partner Relationship and have details on the source; Partner Function category '0006 Activity partner' and Usage 'CRM'.
Please suggest me which access sequence should be used for getting the correct contact person (result same as CRM 2.0C).
Thanks you so much for support.

Hi,
to you receive the same result also in CRMD_ORDER, or only in CIC0. Please keep in mind that there is a difference! In CIC0 no pop-ups for selecting partners is executed, so the first contact person is taken (note 487734 gives a modification. Also the partner function of ICAGENT is necessary within CIC0.
From the view of CRMD_ORDER the following access sequence should be used:
10 COM_PARTNER_A Preceding Document
20 CRM_PARTNER_A BP Relationships By Sales Organization + Wait Flag + Partner Function category '0006 Activity partner' and Usage 'CRM'.
30 CRM_PARTNER_C Business Partner Relationships + Partner Function category '0006 Activity partner' and Usage 'CRM'.
Hope that this information is helpful!
Regards, Gerhard

Partner Determination Problem in Sale Order..

Dear Gurus,
Sold-to Party : 6
Shipt-to Party : 7,8
When creating a sales order when I go for selecting a ship to party , in my case the Sold-to party has multiple ship to parties, then the system gives me this message
Top node 6 for ship to 7 not maintained / ship to is not
valid
Message no. 8W 321
Diagnosis
The top node check is activated in Customizing.
Note:
SP is created by using the account group : 0001
SH is created by using the account group : 0002
I couldn't be able to find where i made a mistake.
Thanks & Regards,
Venkatesh.S.P.

Dear Venkatesh,
Please go to Partner determination in the IMG >Sales and Distribution>Basic functions then go to Set Up Partner Determination for Customer here again you select your partner determination procedure then click on partner functions in procedure now system will Change view of the "Partner functions in procedure " screen here you remove the check in the Not modifiable check box for the Ship to party,Bill to party and payer partner functions.
Not modifiable check mark keep only for SP partner function.
Do the same process at all levels
Set Up Partner Determination for Sales Document
Set Up Partner Determination for Sales Document
Set Up Partner Determination for Delivery
Set Up Partner Determination for Billing Header
Set Up Partner Determination for Billing Item
I hope this will help you,
Regards,
Murali.

Purpose of partner determination procedure,text determination procedure,

hai sap-sd gurus please i would like to know the purpose of
1) parntern determination procedure.
2) out put determination procedure.
3) text determination porcedure.
if i want to do delivery split what r the configuration settings i have to do.
pls provide the all steps.
thanks&regards

Hi Sreenivas,
Partner determination use
In this activity, you define the rules that should be used to perform automatic partner determination.
1. Define the partner functions that differentiate the roles of
     partners in your system.
2. Define the partner determination procedure, and assign the key of the relevant partner object to this Procedure.
3. Assign the partner functions you define to the account groups.
Output Determination Purpose
The Output Determination component offers output functions for sales, shipping, transportation, and billing to help you manage sales transactions with your customers and within your company. You can create sales activity output (for example, customer telephone calls, mailing campaigns) and group output (for example, freight lists). Your company employees can send and receive output. Output is directly linked to the corresponding sales transaction (for example, the system automatically sends an order confirmation via Electronic Data Interchange (EDI) as soon as the employee
Texts Purpose in Sales and Distribution
In a business relationship, it is essential that business partners exchange information throughout the logistics chain. In sales and distribution, this exchange of information is supported by texts in master records and documents. You can maintain these texts for one particular customer or define them so that they can be used more flexibly.
Texts can be used in many areas of sales and distribution:
Sales notes for customers
Sales texts for materials
Explanations in order confirmations
Shipping instructions in deliveries
You can define as many text types as you require (sales texts, shipping texts, internal notes, supplement texts etc.) for master records and documents.
You can take the settings for the texts from Sales and Distribution Customizing under Text control.
Delivery split
Regarding Delivery split you can control through copy control routines in the VTLA transaction.
I hope it will help you,
Regards,
Murali.

How will i configure partner determination for customer master

how will i configure partner determination for customer master data.

hi
Check this
BUSINESS PARTNERS AND PARTNER DETERMINATION
In the partner determination procedure you can determine whether partner functions can or should occur in a partner object (Customer Master, Sales Document, Item Category etc.) For each object, in which partner function can be created, you can define partner procedures. This also means that
For Customer Master
For Sales Documents
For Sales Documents and Billing Documents: for items
We can define our partner determination procedure for each of these levels as shown below. In Blue are given the ones wherein the Partner Procedures are assigned to the Partner Objects
Customer Master Account Group
Sales Document Header Sales Document Type
Sales document Item Item Category in sales
Delivery Delivery Type
Billing Header Billing Type
Billing Item Billing Type
Sales Activity Sales Activity type
By assigning a procedure you determine for which account groups (for the customer master), which sales document types (for sales documents) and for which item categories this procedure would be valid.
In the partner determination procedure you can determine for each partner function
whether the partner function is an obligatory partner function
whether the partner function can be changed in the document
BUSINESS PARTNER FUNCTION
By assigning a business partner function to a partner you can determine which functions the partner fulfils in the business process. Partner Functions are classified using partner type. The partner type represents the roles played by the business partner within the business transaction.
Following partner functions exist in the standard process of Sales and Distribution
Partner Type Customer
Sold-to Party, Ship-to Party, Bill-to Party, Payer and Sold-to Party authorized to release against a contract. You can define the sold-to party authorized to release against a contract in the partner screen of a contract. This partner may only schedule orders with reference to this contract, even when he is not the sold-to party authorized against a contract.
Partner Type Contact Person
Contact persons are natural persons whom you must contact at the customers for business processing (e.g. purchasers) Contact person can be created directly in customer master record.
Partner Type Vendor
A forwarding agent is an example of a business partner on the credit side, who is included in a sales process. If you commission a particular forwarding agent for deliveries to a specific customer, you can define the forwarding agent in the customer master record as the partner.
The other possible partner functions on the credit side in the sale process are interpreters, auditors etc. The forwarding agent is an agent who performs transportation services. This includes organizing the shipment, delivery and receipt of the goods, arranging the carrier services and handling the customs issues.
Partner Type Personnel
Employee Responsible
Sales Personnel
You can enter an employee from your firm as the person responsible:
In the Customer Master If the employee is normally responsible for processing transactions with this customer.
In the Sales Document If the employee is responsible for processing the Business Transaction.
STEP WISE PROCESS FOR PARTNER DETERMINATION PROCEDURE
Sales and Distribution->Basic Functions->Partner Determination->set Up Partner Determination->Set up Partner Determination for Customer Master.
First go to OVT0 create customer account groups. Here you make new entries, click whether it is a one time customer, description. Also you can do the field selection here for general data, co. code data and sales area data.
Now go to IMG logistics general business partner customers control define & assign customer number ranges define the number. Here you range that you want and assign it to your customer account group.
Now go to VOPA here the selection will be on customer master, click on partner procedures, create the partner determination procedure. The following steps need to be done in partner determination area
Assign partner function to account group i.e SP,SH, BP, PY to account group (debit side ). Sales and Distribution->Basic Functions->Partner Determination->Assign Partner Functions on the debit side to account Groups.
Then create Partner Determination Procedure.
Assign the Partner Determination Procedure to Partner Function.
Then finally assign the Partner Determination Procedure to acc group.
Important Points in Business Partners and Partner Determination Procedure
Partner relationship maintained/defined in the customer master is proposed automatically in the document header when you create a sales document.
In customizing we can decide whether several partners can be assigned to one partner function in the customer master.
In sales documents, the system is configured so that only one partner can be assigned to each partner function.
We can define partners at item level in the sales documents.
Business Partners that are defined at the header level however cannot be changed at the item level.
You can prohibit anyone from changing a partner that has already been entered in a sales document.
It is also possible to manually change or enter the address of a partner, such as the Ship-to Party. This change does not affect the master record.

Problems with Partner determination in activities generated from call list

In our scenario we are using IC Win Client 5.0.
During the generation of the call list it to my understanding that when a call is scheduled for a Business Partner a corresponding activity is created and linked to the call. It is in this process that the partner determination procedure for the linked activity kicks in and should determine the BP from the sceduled call and fill the field 'Sold-to-Party' in the activity.
However this is not working!! I have tested basically all of the standard access sequences for the partner determination procedure and I haven't been able to do it.
By using standard access sequence 0019 I was able to determine the BP using the relationship, however when opening the generated activity an error ocurrs that states the following message: 'Only one partner function of function category Sold-to-Party is allowed'.
Whats really odd is that if we erase the Sold-to-party field leaving it blank and press enter, the contact person is filled in the same field! It seems like something is missing in the procedure or the way I use the access sequence.
Please help!
Thanks in advance,
Pedro

Pedro
For activities you should not determine SoldToParties, but rather Activity Partners. Please have a look at the standard partner schemes for activities, to see which partner functions are usually used for activities besides the activity partner.
If you have to use soldtoparty partner functions, please take into account that they have special checks enabled.
The system fills in the organization instead of the contact person, esp. if no contact person exists: In R/3 you can have non-reflexive partner functions, but in CRM these are not saved. Instead in partner determination if no target can be found the origined partner itself is used as a result. That is why the organization is put into the result instead of the contact person.
HTH - Kai

Employee responsible is not determined in partner determination- Transaction

Hi Experts,
Partner determaination in Activity. Eg : Sold to party :1001051, Employee id : 80007 and sales employee id: 80005.
under BP Sold 1001051 has relationship employee responsible 80007 relationship is maintained.
In the org model under the Sales org postion sales employee : 80005 is assigned.
we have created a partner determination procedure with partner functions 10 as Sales employee with category employee and relationship category as Bur011 as employee responsible and partner funciton 20 as employee with the same category and relationship category.
In the PDP we hace created acccess sequnece with 10 CRM_partner_org data with the rule configured to get the sales employee.
Access sequence 20 as CRM_Partner_business partner relationship to get the employee relationship from BP.
When we create the activity the partner determination is happening and under the partners tab we find the
sales employee = 80007
Employee = 80007
Now in the partner determination access sequnce 10 is not working, system is filling up the value of employee 80007 in the sales employee feild.
we have checked the rule and simulated the rule, we are getting the correct result of the postion and the agent -user assignment as 80005. but when we create a activity it is skipping access sequence 10 and by default fills up the value from the BP relationship Employee responsible 80007(employee) to the sales employee partner function.
If we are having 2 persons as employee in BP, the partners are filled twice. for example : Sold to party :1001051, Employee id : 80007, 80006 and sales employee id: 80005.
in Partner assignment block we are getting output as, it is not takind sales employee id 80005.
sales employee = 80006
sales employee = 80007
Employee = 80006
Employee = 80007
Please help me with a clue how to fix this issue.
Regards,
Karthik

Hi Karthik,
You can proceed with debugging the access sequences. The access sequences are hit via BADI : COM_PARTNER_DETERM and the implementation to chose is with the filter = source name.
Eg: CRM_PARTNER_DETERM_C for relationship based access.
/Hasan

Activity in Portal (partner determination)

Similar Messages

Maybe you are looking for