Activity Mangement - Unable to get Task as a follow up of Appointment
Hello,
I have a requirement wherein a Task should be created as a follow up to an Appointment.
Now, when i click on follow up button in an appointment, i am not able to find my Z task as a follow up transaction and hence cannot create the follow up task.
Do i have to mantain copy control for my Appointment/Task ?
Is it happening because some standard configuration that is missing?
Activity Mangement - Unable to get Task as a follow up of Appointment
Similar Messages
-
11gr2 Dataguard Active Standby - Unable to get Real-Time apply working
As above, I am unable to get real time apply to work WITHOUT it switching my standby back to MOUNT state. There does not seem to be anyting obvious from the broker, or alert logs.
On the Standby:
SQL> alter database recover managed standby database cancel;
Database altered.
SQL> alter database open read only;
Database altered.
SQL> select open_mode from v$database;
OPEN_MODE
READ ONLY
SQL> alter database recover managed standby database using current logfile disconnect;
Database altered.
SQL> select open_mode from v$database;
OPEN_MODE
MOUNTED
Primary:-
SQL> SELECT status, recovery_mode FROM v$archive_dest_status where dest_name = 'LOG_ARCHIVE_DEST_2';
STATUS RECOVERY_MODE
VALID MANAGED REAL TIME APPLY
Edited by: Imran on Apr 17, 2012 10:56 PMHello;
This is expected.
Works the same exact way on my system. How Redo Data is applied is set when the database is MOUNTED.
See - 6 Redo Apply Services
Data Guard Concepts and Administration 11g Release 2 (11.2) E10700-0
The document is vague on this at best, but think about the error you get if you try to start apply twice.
Data Guard Real-Time Apply FAQ [ID 828274.1]
Best Regards
mseberg
Edited by: mseberg on Apr 17, 2012 10:04 AM
h1. Test
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> alter database recover managed standby database cancel;
Database altered.
SQL> alter database open read only;
Database altered.
SQL> alter database recover managed standby database using current logfile disconnect;
Database altered.
SQL> select open_mode from v$database;
OPEN_MODE
READ ONLY WITH APPLY
SQL> So I get different results ??
Edited by: mseberg on Apr 17, 2012 10:40 AM
h2. Still more
I would like to change my answer. Based on my test and queries as shown below I believe REAL TIME apply is working. Note the last log says NO because its in progress.
Checking last sequence in v$archived_log
STANDBY SEQUENCE# APPLIED COMPLETIO
STANDBY 343 YES 16-APR-12
STANDBY 344 YES 16-APR-12
STANDBY 345 YES 16-APR-12
STANDBY 346 YES 16-APR-12
STANDBY 347 YES 17-APR-12
STANDBY 348 NO 17-APR-12
6 rows selected.
----------------Last log on Primary--------------------------------------|
MAX(SEQUENCE#)
348
1 row selected.Yes, I doubled check and it works on mine. I guess I read what I wanted to read.
All my Standby redo are setup correctly ( size and numbers )
READ ONLY WITH APPLYYour answer my be the Uwe answer at the end of this thread :
Enabling the Active Dataguard and Real Time Apply
Best Regards
mseberg
Edited by: mseberg on Apr 17, 2012 10:50 AM -
Hi Community
I have an issue on a live SP2013 farm that is really causing me grief. Although I ( Farm Admin) and my other users can follow items which are subsequently confirmed in our respective News Feeds -
none of my users are are actually getting emails notifications .
Alerts ( did) work fine.
I have written some PS to vew and set the SPS-EmailOptin for each user
$up[$upManagerAttribute].Value = $managerNTName
# check if the email check boxes are unchecked '1' then if so check all
write-host -fore white "User Profile for user"$NTName "Now has email opt in currently set to" $up[$upEmailOptin].Value
if ($up[$upEmailOptin].Value -gt 0)
$up[$upEmailOptin].Value = 0
write-host -fore white "User Profile for user"$NTName "Now has email opt in all checked."
Very few are unchecked. $up["SPS-PrivacyActivity"].Value = 4095 is set for all users as in
the the privacy settings on the newsfeed are all checked
For my currrent client I set up a development intranet which had the seperate web apps for the main portal and mysites. Test users were able to follow documents, sites without any problems. Before go live I was asked to accomodate a requirement
where there is only one web application (don't ask!) effectivley http://myintranet
so mysites sits under http://myintranet/mysites . I made the appropriate changes to my AutoSPInstaller scritpt and al appearedd l good : services , Service appplications, mysites are all started. I am using
the two app pool accounts one for the portal and one for mysites.
A quick look at the the releated threads on this forum indicated permssions could be DB permissions related tho I am not seeing anything in ULS to strongly point to this
$webApp = Get-SPWebApplication http://myintranet
$webApp.GrantAccessToProcessIdentity("mydomain\SP_ProfilesAppPool")
- checked and SPAcess Data is given to the mysites app pool accout to the portal web app .
I am seeing some odd errors in ULS
Ignoring the space ' critical' warning which I have flagged up to Ops and I doubt is my real problem. The errors I see that are related are :
System.IO.FileNotFoundException: The system cannot find the file specified. (Exception from HRESULT: 0x80070002), StackTrace:
at Microsoft.SharePoint.SPWeb.GetList(String strUrl)
at Microsoft.Office.Server.Microfeed.MBUtilities.GetPublishedFeedListPrivate(SPWeb web, String relativeUrl)
at Microsoft.Office.Server.UserProfiles.FollowedItem.CreateFollowedSite(SPWeb site, FollowedItemData data)
at Microsoft.Office.Server.UserProfiles.FollowedItem.Create(SPSite site, SPWeb existingWeb, Uri url, FollowedItemData data)
at Microsoft.Office.Server.UserProfiles.FollowedItem.RecreateByReferencedItem(SPSite site, SPWeb web)
at Microsoft.Office.Server.UserProfiles.FollowedContent.RefreshFollowedItem(FollowedItem item, SPS2SAppExecutionPolicy policy)
at Microsoft.Office.Server.UserProfiles.FollowedContent.Follow(Uri url, FollowedItemData data)
at Microsoft.Office.Server.UserProfiles.FollowedContentServerStub.InvokeMethod(Object target, String methodName, XmlNodeList xmlargs, ProxyContext proxyContext, Boolean& isVoid)
at Microsoft.SharePoint.Client.ServerStub.InvokeMethodWithMonitoredScope(Object target, String methodName, XmlNodeList args, ProxyContext proxyContext, Boolean& isVoid)
at Microsoft.SharePoint.Client.ClientMethodsProcessor.InvokeMethod(Object obj, String methodName, XmlNodeList xmlargs, Boolean& isVoid)
at Microsoft.SharePoint.Client.ClientMethodsProcessor.ProcessMethod(XmlElement xe)
and
5b93b0ef-b1ff-437d-b674-5285be9b9395 Stack trace:
at Microsoft.SharePoint.SPSite.InitUserToken(SPRequest request)
at Microsoft.SharePoint.SPSite.SPSiteConstructor(SPFarm farm, Guid applicationId, Guid contentDatabaseId, Guid siteId, Guid siteSubscriptionId, SPUrlZone zone, Uri requestUri, String serverRelativeUrl, Boolean hostHeaderIsSiteName, SPUserToken userToken, Boolean appWebRequest, String appHostHeaderRedirectDomain, String appSiteDomainPrefix, String subscriptionName, String appSiteDomainId, Uri primaryUri)
at Microsoft.SharePoint.SPSite..ctor(SPFarm farm, Uri requestUri, Boolean contextSite, Boolean swapSchemeForPathBasedSites, SPUserToken userToken)
at Microsoft.SharePoint.SPSite..ctor(SPFarm farm, Uri requestUri, Boolean contextSite, SPUserToken userToken)
at Microsoft.SharePoint.SPSite..ctor(String requestUrl)
at Microsoft.Office.Server.UserProfiles.SPS2SAppUtility.TryOpenWeb(Uri url, SPSite& site, SPWeb& web, Boolean& inSPContext)
at Microsoft.Office.Server.UserProfiles.SPS2SAppExecutionContext.InitializeForSite()
at Microsoft.Office.Server.UserProfiles.SPS2SAppExecutionContext.EnsureInitialized()
Also, I am testing with my account which does have all the mysites newsfeed options checked in the CA -> UPA ->"Manage User Profile"
Anybody seen this whilist I follow the where those exceptions take me.
Freelance consultantHi,
Thank you for your question. I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience. Thank you for your understanding and support.
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support -
I have "chatted" with customer service 5 different times. I was sent here. I have activated Photoshop Elements 9 on two different iMacs. They are both dead and I am unable to get it to activate on my newest computer. iMac. Can anybody help me?
Unfortunately, only adobe can help you with that, as most people here are just posters such as your self and don't work for adobe.
If you go here and use the Chat now button (bottom of page), they should get you up and running by resetting your activations.
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html -
I am receiving an Activation Error and unable to get into my phone.It's asking me to register my phone in the iPhone Developer program however I'm already registered. How do I move forward?
Hi, jsgladden.
Here is an article I would recommend when experiencing issues activating a device. The step referring to recovery mode usually resolves the issue.
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
To retrieve your data, you will need to restore from backup after processing these steps. Here is the article that walks you through restoring from either your iCloud or iTunes backup.
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Cheers,
Jason H. -
Hello,
I am new to ADF, I am trying to learn how to navigate from one page to another, the code that I have is simple, but it is not working, I specified the control flow rules in the adfc-config.xml and I even tried to specify the navigation rules in the faces-config.xml file, but it doesn't matter if I do it in one configuration file or another I get the same error. This is my first time working with ADF, I don't have formal training, just some video tutorial that I have seen on internet. I have previous experience with JSF, so I feel more comfortable writing the code for my program than using all the graphical tools (at least at this moment)
Any help to solve this problem will be highly appreciated.
This is my page1.jsf code:
<?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE html>
<f:view xmlns:f="http://java.sun.com/jsf/core" xmlns:af="http://xmlns.oracle.com/adf/faces/rich" xmlns:h="http://java.sun.com/jsf/html">
<af:document title="page1.jsf" id="d1" binding="#{backingBeanScope.backing_page1.d1}">
<af:form id="f1" binding="#{backingBeanScope.backing_page1.f1}"></af:form>
</af:document>
<h:head>
<title>First JSF Example</title>
</h:head>
<h:body>
<h3>ADF Hello World Example</h3>
<h:form>
What's your name?
<h:inputText value="#{backingBeanScope.backing_page1.message}"></h:inputText>
<h:commandButton value="Welcome Me" action="#{backingBeanScope.backing_page1.processPage1}"></h:commandButton>
</h:form>
</h:body>
</f:view>
This is my backing bean for page1:
package view.backing;
import oracle.adf.view.rich.component.rich.RichDocument;
import oracle.adf.view.rich.component.rich.RichForm;
public class Page1 {
private RichForm f1;
private RichDocument d1;
private String message;
public void setF1(RichForm f1) { this.f1 = f1; }
public RichForm getF1() {return f1;}
public void setD1(RichDocument d1) {this.d1 = d1;}
public RichDocument getD1() {return d1;}
public void setMessage(String msg) { this.message= msg; }
public String getMessage() { return this.message; }
public String processPage1()
System.out.println("++++++++++++++++++++++++++++++++++++++++++++++move to next page");
return "success";
This is my adfc-config.xml file:
<?xml version="1.0" encoding="UTF-8" ?>
<adfc-config xmlns="http://xmlns.oracle.com/adf/controller" version="1.2">
<control-flow-rule id="__5">
<from-activity-id>page1.jsf</from-activity-id>
<control-flow-case id="__6">
<from-action>#{backingBeanScope.backing_page1.processPage1}</from-action>
<from-outcome>success</from-outcome>
<to-activity-id>page2.jsf</to-activity-id>
</control-flow-case>
</control-flow-rule>
<managed-bean id="__2">
<managed-bean-name>backing_page1</managed-bean-name>
<managed-bean-class>view.backing.Page1</managed-bean-class>
<managed-bean-scope>backingBean</managed-bean-scope>
<!--oracle-jdev-comment:managed-bean-jsp-link:1page1.jsf-->
</managed-bean>
<managed-bean id="__1">
<managed-bean-name>backing_page2</managed-bean-name>
<managed-bean-class>view.backing.Page2</managed-bean-class>
<managed-bean-scope>backingBean</managed-bean-scope>
<!--oracle-jdev-comment:managed-bean-jsp-link:1page2.jsf-->
</managed-bean>
</adfc-config>
Finally this is my page2.jsf
<?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE html>
<f:view xmlns:f="http://java.sun.com/jsf/core" xmlns:af="http://xmlns.oracle.com/adf/faces/rich" xmlns:h="http://java.sun.com/jsf/html">
<af:document title="page2.jsf" id="d1" binding="#{backingBeanScope.backing_page2.d1}">
<af:form id="f1" binding="#{backingBeanScope.backing_page2.f1}"></af:form>
</af:document>
<!--oracle-jdev-comment:auto-binding-backing-bean-name:backing_page2-->
<h:body>
<h3>ADF Hello World Example PAGE2</h3>
</h:body>
</f:view>
This is the error that I get when I push the button on page1 and I try to navigate to page 2:
Target URL -- http://127.0.0.1:7101/EcatsADF12c-ViewController-context-root/faces/page1.jsf
<org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl> <ViewHandlerImpl> <_checkTimestamp> <TIMESTAMP_CHECKING_ENABLED_SHOULDNOT_IN_PRODUCTION>
<Apr 22, 2015 4:34:43 PM CDT> <Warning> <Socket> <BEA-000449> <Closing the socket, as no data read from it on 127.0.0.1:57,015 during the configured idle timeout of 5 seconds.>
<Apr 22, 2015 4:34:43 PM CDT> <Warning> <Socket> <BEA-000449> <Closing the socket, as no data read from it on 127.0.0.1:57,014 during the configured idle timeout of 5 seconds.>
<Apr 22, 2015 4:34:43 PM CDT> <Warning> <Socket> <BEA-000449> <Closing the socket, as no data read from it on 127.0.0.1:57,013 during the configured idle timeout of 5 seconds.>
<Apr 22, 2015 4:34:43 PM CDT> <Warning> <Socket> <BEA-000449> <Closing the socket, as no data read from it on 127.0.0.1:57,017 during the configured idle timeout of 5 seconds.>
<Apr 22, 2015 4:34:43 PM CDT> <Warning> <Socket> <BEA-000449> <Closing the socket, as no data read from it on 127.0.0.1:57,016 during the configured idle timeout of 5 seconds.>
++++++++++++++++++++++++++++++++++++++++++++++move to next page
<oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl> <DiagnosticsDataExtractorImpl> <createADRIncident> <incident 11 created with problem key "ADFC-02013 [ADFc]">
<oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl> <DiagnosticsDataExtractorImpl> <createADRIncident> <incident 12 created with problem key "ADFC-02013 [ADFc]">
<oracle.adf.view> <RichExceptionHandler> <_logUnhandledException> <ADF_FACES-60098:Faces lifecycle receives unhandled exceptions in phase INVOKE_APPLICATION 5>
oracle.adf.controller.activity.ActivityLogicException: ADFC-02013: Unable to get metadata for activity 'page2.jsf'.
at oracle.adfinternal.controller.util.Utils.createAndLogActivityLogicException(Utils.java:234)
at oracle.adfinternal.controller.engine.ControlFlowEngine.doRouting(ControlFlowEngine.java:1133)
at oracle.adfinternal.controller.engine.ControlFlowEngine.doRouting(ControlFlowEngine.java:979)
at oracle.adfinternal.controller.engine.ControlFlowEngine.routeFromActivity(ControlFlowEngine.java:551)
at oracle.adfinternal.controller.engine.ControlFlowEngine.performControlFlow(ControlFlowEngine.java:162)
at oracle.adfinternal.controller.application.NavigationHandlerImpl.handleAdfcNavigation(NavigationHandlerImpl.java:119)
at oracle.adfinternal.controller.application.NavigationHandlerImpl.handleNavigation(NavigationHandlerImpl.java:88)
at org.apache.myfaces.trinidadinternal.application.NavigationHandlerImpl.handleNavigation(NavigationHandlerImpl.java:50)
at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:130)
at javax.faces.component.UICommand.broadcast(UICommand.java:315)
at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:794)
at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:1259)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:1074)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:402)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:225)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:593)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:280)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:254)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:136)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:346)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:25)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:192)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:105)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:502)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:502)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:327)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:229)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:202)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:137)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:120)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:217)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:81)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:220)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3436)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3402)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.provider.WlsSubjectHandle.run(WlsSubjectHandle.java:57)
at weblogic.servlet.internal.WebAppServletContext.doSecuredExecute(WebAppServletContext.java:2285)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2201)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1572)
at weblogic.servlet.provider.ContainerSupportProviderImpl$WlsRequestExecutor.run(ContainerSupportProviderImpl.java:255)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:311)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:263)User, tell us your jdev version, please!
What is your goal?
What you have find had nothing to do with ADF. If you ent to learn adf then I recommend to work through find of the tutorials available on the jdev home page.
If adf is not your goal, you might want to use Trinidad and ask your question in their forum.
You might not like the declarative approach adf uses, but if you want to learn how to use adf, you have to understand how ADF works. Most can be done using java, but one you understand the framework you see the advantage.
Timo -
Unable to get Material No and Description from VBAP
Hi Gurus
Can anyone please help me to get material number and description from vbap table, The report is fine but I am unable to get material no and description.
regards
report ZCHGDOC_BY_SALES no standard page heading
line-size 132.
type-pools:
slis. " ALV types
Tables
tables:
cdhdr, " Change documents: Header
cdpos, " Change documents: Items
vbak, " Sales order: Header
mara, " Material No
user_addr, " User Address
vbap. " Contract order: Items
Types
types:
begin of ty_cdhdr,
objectclas like cdhdr-objectclas, " Object class
objectid like cdhdr-objectid, " Object value
changenr like cdhdr-changenr, " Document change number
username like cdhdr-username, " Changed by
udate like cdhdr-udate, " Changed on
utime like cdhdr-utime, " Changed at
tcode like cdhdr-tcode, " Transaction code
end of ty_cdhdr,
ty_it_cdhdr type ty_cdhdr occurs 0,
begin of ty_cdpos,
objectclas like cdpos-objectclas, " Object class
objectid like cdpos-objectid, " Object value
changenr like cdpos-changenr, " Document change number
tabname like cdpos-tabname, " Table name
tabkey like cdpos-tabkey, " Table key
fname like cdpos-fname, " Field name
chngind like cdpos-chngind, " Change indicator
value_new like cdpos-value_new, " New value of field
value_old like cdpos-value_old, " Old value of field
end of ty_cdpos,
ty_it_cdpos type ty_cdpos occurs 0,
begin of ty_dd03l,
tabname like dd03l-tabname,
fieldname like dd03l-fieldname,
as4local like dd03l-as4local,
as4vers like dd03l-as4vers,
rollname like dd03l-rollname,
end of ty_dd03l,
ty_it_dd03l type ty_dd03l occurs 0,
begin of ty_dd04t,
rollname like dd04t-rollname,
ddlanguage like dd04t-ddlanguage,
as4local like dd04t-as4local,
as4vers like dd04t-as4vers,
scrtext_l like dd04t-scrtext_l,
end of ty_dd04t,
ty_it_dd04t type ty_dd04t occurs 0,
begin of ty_kna1,
kunnr like kna1-kunnr, " Customer number
name1 like kna1-name1, " Customer name
end of ty_kna1,
ty_it_kna1 type ty_kna1 occurs 0,
begin of ty_user_addr,
bname like user_addr-bname, " user no
name_textc like user_addr-name_textc , " Username
end of ty_user_addr,
ty_it_user_addr type ty_user_addr occurs 0,
begin of ty_vbap,
matnr like vbap-matnr, " Material No
arktx like vbap-arktx, " Production Description
end of ty_vbap,
ty_it_vbap type ty_vbap occurs 0,
ty_text(500) type c,
ty_lines type tline,
ty_it_lines type ty_lines occurs 0,
begin of ty_merged,
vbeln like vbak-vbeln, " Sales order number
erdat like vbak-erdat, " Created on
auart like vbak-auart, " Order type
faksk like vbak-faksk, " Billing block in SD document
netwr like vbak-netwr, " Net value
waerk like vbak-waerk, " Currency
vkorg like vbak-vkorg, " Sales organisation
vtweg like vbak-vtweg, " Distribution channel
vkbur like vbak-vkbur, " Sales office
fkara like vbak-fkara, " Proposed billing type
kunnr like vbak-kunnr, " Sold-to party
bname like vbak-bname , " User No
xblnr like vbak-xblnr, " Reference
fbuda like vbkd-fbuda, " Date services rendered
username like cdhdr-username, " Changed by
udate like cdhdr-udate, " Changed on
utime like cdhdr-utime, " Changed at
tcode like cdhdr-tcode, " Transaction code
tabname like cdpos-tabname, " Table name
tabkey like cdpos-tabkey, " Table key
fname like cdpos-fname, " Field name
chngind like cdpos-chngind, " Change indicator
value_new like cdpos-value_new, " New value of field
value_old like cdpos-value_old, " Old value of field
scrtext_l like dd04t-scrtext_l, " Description of field
intnote type ty_text, " Internal note
hdrnote type ty_text, " Header note
name1 like adrc-name1, " Sold-to party name
matnr like vbap-matnr, " Material No
arktx like vbap-arktx, " Product Description
end of ty_merged,
ty_it_merged type ty_merged occurs 0,
begin of ty_vbak,
vbeln like vbak-vbeln, " Sales order number
erdat like vbak-erdat, " Created on
auart like vbak-auart, " Order type
faksk like vbak-faksk, " Billing block in SD document
netwr like vbak-netwr, " Net value
waerk like vbak-waerk, " Currency
vkorg like vbak-vkorg, " Sales organisation
vtweg like vbak-vtweg, " Distribution channel
vkbur like vbak-vkbur, " Sales office
fkara like vbak-fkara, " Proposed billing type
kunnr like vbak-kunnr, " Sold-to party
xblnr like vbak-xblnr, " Reference
objectid like cdhdr-objectid, " Change document object
end of ty_vbak,
ty_it_vbak type ty_vbak occurs 0,
begin of ty_vbkd,
vbeln like vbkd-vbeln, " Sales order number
posnr like vbkd-posnr, " Sales order item
fbuda like vbkd-fbuda, " Date services rendered
end of ty_vbkd,
ty_it_vbkd type ty_vbkd occurs 0.
Internal tables
data:
it_cdhdr type ty_it_cdhdr,
it_cdpos type ty_it_cdpos,
it_fieldcat type slis_t_fieldcat_alv,
it_kna1 type ty_it_kna1,
it_user_addr type ty_it_user_addr,
it_merged type ty_it_merged,
it_vbak type ty_it_vbak,
Material No
it_vbap type ty_it_vbap,
it_vbkd type ty_it_vbkd.
data:
wa_vbak type ty_vbak.
data:
st_tvariant like disvariant,
st_variant like disvariant.
constants:
co_as4local_a like dd03l-as4local " Active version
value 'A',
co_objectclas_verkbeleg like cdhdr-objectclas
value 'VERKBELEG',
co_posnr_initial like vbkd-posnr " Initial item number
value is initial,
co_posnr_initial_2 like vbap-posnr " Initial item number
value is initial,
co_save_u type c " User display variant
value 'U', " saving allowed.
co_trvog_0 like vbak-trvog " Sales order
value '0'.
data:
va_exit type c, " ALV display
va_tabix like sy-tabix.
selection-screen: begin of block b1 with frame title text-001.
select-options:
s_vkorg for vbak-vkorg OBLIGATORY, " Sales organisation
s_vkbur for vbak-vkbur, " Sales office
s_vtweg for vbak-vtweg, " Distribution channel
s_vbeln for vbak-vbeln, " Sales order number
s_usrnme for cdhdr-username, " Changed by
s_udate for cdhdr-udate. " Changed on
selection-screen: end of block b1,
begin of block b2 with frame title text-002.
parameters:
p_varint like disvariant-variant. " Display variant.
selection-screen: end of block b2.
Initialization
initialization.
Load display variant.
if not p_varint is initial.
move st_variant to st_tvariant.
move p_varint to st_tvariant-variant.
call function 'REUSE_ALV_VARIANT_EXISTENCE'
exporting
i_save = co_save_u
changing
cs_variant = st_tvariant.
st_variant = st_tvariant.
else.
clear st_variant.
st_variant-report = sy-repid.
endif.
at selection-screen on value-request for p_varint.
Provide display variant list for this program.
call function 'REUSE_ALV_VARIANT_F4'
exporting
is_variant = st_variant
i_save = co_save_u
importing
e_exit = va_exit
es_variant = st_tvariant
exceptions
not_found = 2.
if sy-subrc eq 2.
message id sy-msgid type 'S'
number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
else.
if va_exit eq space.
st_variant = st_tvariant.
p_varint = st_tvariant-variant.
endif.
endif.
At selection screen
at selection-screen.
Load display variant.
if not p_varint is initial.
move st_variant to st_tvariant.
move p_varint to st_tvariant-variant.
call function 'REUSE_ALV_VARIANT_EXISTENCE'
exporting
i_save = co_save_u
changing
cs_variant = st_tvariant.
st_variant = st_tvariant.
else.
clear st_variant.
st_variant-report = sy-repid.
endif.
Start of selection
Extract order details from VBAK
select vbeln erdat auart faksk netwr waerk vkorg vtweg vkbur fkara
kunnr xblnr
from vbak
into table it_vbak
where vkorg in s_vkorg
and vkbur in s_vkbur
and vbeln in s_vbeln.
if sy-subrc ne 0.
No data found for selection
message s001(zgen).
exit.
endif.
loop at it_vbak into wa_vbak.
va_tabix = sy-tabix.
wa_vbak-objectid = wa_vbak-vbeln.
modify it_vbak from wa_vbak
index va_tabix
transporting objectid.
endloop.
if sy-subrc ne 0.
No data found for selection
message s001(zgen).
exit.
endif.
loop at it_vbak into wa_vbak.
va_tabix = sy-tabix.
wa_vbak-objectid = wa_vbak-vbeln.
modify it_vbak from wa_vbak
index va_tabix
transporting objectid.
endloop.
Extract Change data
select objectclas objectid changenr username udate utime tcode
from cdhdr
into table it_cdhdr
for all entries in it_vbak
where objectclas eq co_objectclas_verkbeleg
and objectid eq it_vbak-objectid
and username in s_usrnme
and udate in s_udate.
if sy-subrc eq 0.
select objectclas objectid changenr tabname tabkey fname chngind
value_new value_old
from cdpos
into table it_cdpos
for all entries in it_cdhdr
where fname NE 'CMPRE_FLT'
and objectclas eq it_cdhdr-objectclas
and objectid eq it_cdhdr-objectid
and changenr eq it_cdhdr-changenr.
endif.
Extract customer details from KNA1
select kunnr name1
from kna1
into table it_kna1
for all entries in it_vbak
where kunnr eq it_vbak-kunnr.
---- Changes are made here -
Extract Material details from vbap
select matnr arktx
from vbap
into table it_vbap
for all entries in it_vbak
where
vbeln eq it_vbak-vbeln
and posnr eq co_posnr_initial.
-----------------End of Change ----------------------*
Extract Contract No from vbkd.
select vbeln posnr fbuda
from vbkd
into table it_vbkd
for all entries in it_vbak
where vbeln eq it_vbak-vbeln
and posnr eq co_posnr_initial.
perform merge_data tables it_cdhdr
it_cdpos
it_kna1
it_user_addr
it_merged
it_vbak
it_vbap
it_vbkd.
if it_merged[] is initial.
message s001(zgen).
exit.
endif.
Release memory no longer required.
free: it_cdhdr,
it_cdpos,
it_kna1,
it_user_addr,
it_vbak,
it_vbap,
it_vbkd.
Build field catalog for call to report function
perform build_field_catalog tables it_fieldcat.
Output report.
perform output_report tables it_fieldcat
it_merged.
*& Form merge_data
text
form merge_data tables pa_it_cdhdr type ty_it_cdhdr
pa_it_cdpos type ty_it_cdpos
pa_it_kna1 type ty_it_kna1
pa_it_user_addr type ty_it_user_addr
pa_it_merged type ty_it_merged
pa_it_vbak type ty_it_vbak
pa_it_vbap type ty_it_vbap
pa_it_vbkd type ty_it_vbkd.
Local internal tables
data:
lit_dd03l type ty_it_dd03l,
lit_dd04t type ty_it_dd04t.
Local work areas
data:
lwa_cdhdr type ty_cdhdr,
lwa_cdpos type ty_cdpos,
lwa_dd03l type ty_dd03l,
lwa_dd04t type ty_dd04t,
lwa_kna1 type ty_kna1,
lwa_user_addr type ty_user_addr,
lwa_merged type ty_merged,
lwa_vbak type ty_vbak,
lwa_vbap type ty_vbap,
lwa_vbkd type ty_vbkd.
Local variables
data:
lva_dd03l_tabix like sy-tabix,
lva_dd04t_tabix like sy-tabix.
Sort Data
sort pa_it_cdhdr by objectid changenr.
sort pa_it_cdpos by objectid changenr tabname tabkey fname.
sort pa_it_kna1 by kunnr.
sort pa_it_user_addr by bname.
sort pa_it_vbak by vbeln.
sort pa_it_vbkd by vbeln.
loop at pa_it_vbak into lwa_vbak.
clear lwa_merged.
Assign sales order fields to reporting work area
lwa_merged-vbeln = lwa_vbak-vbeln.
lwa_merged-erdat = lwa_vbak-erdat.
lwa_merged-auart = lwa_vbak-auart.
lwa_merged-faksk = lwa_vbak-faksk.
lwa_merged-netwr = lwa_vbak-netwr.
lwa_merged-waerk = lwa_vbak-waerk.
lwa_merged-vkorg = lwa_vbak-vkorg.
lwa_merged-vtweg = lwa_vbak-vtweg.
lwa_merged-vkbur = lwa_vbak-vkbur.
lwa_merged-fkara = lwa_vbak-fkara.
lwa_merged-kunnr = lwa_vbak-kunnr.
lwa_merged-bname = 1wa_user_addr-bname.
lwa_merged-xblnr = lwa_vbak-xblnr.
Assgin Material to reporting work area
lwa_merged-matnr = lwa_vbap-vbeln.
Get name of sold-to party from PA_IT_KNA1
clear lwa_kna1.
read table pa_it_kna1 into lwa_kna1
with key kunnr = lwa_vbak-kunnr
binary search.
lwa_merged-name1 = lwa_kna1-name1.
Get name from PA_it_user_addr
clear lwa_user_addr.
read table pa_it_user_addr into lwa_user_addr
with key = lwa_user_addr-bname
binary search.
lwa_merged-username = lwa_user_addr-name_textc.
Get business data from PA_IT_VBKD.
clear lwa_vbkd.
read table pa_it_vbkd into lwa_vbkd
with key vbeln = lwa_vbak-vbeln
binary search.
lwa_merged-fbuda = lwa_vbkd-fbuda.
Get Material Data
clear lwa_vbap.
read table pa_it_vbap into lwa_vbap
with key matnr = lwa_vbap-matnr
with key vbeln = lwa_vbak-vbeln
binary search.
lwa_merged-arktx = lwa_vbap-arktx.
Get internal note text for sales order
perform read_text using '0002'
'1'
lwa_merged-vbeln
'VBBK'
lwa_merged-intnote.
Get header note 1 text for sales order
perform read_text using 'Z002'
'1'
lwa_merged-vbeln
'VBBK'
lwa_merged-hdrnote.
Determine if change documents exist for sales order.
clear lwa_cdhdr.
read table pa_it_cdhdr into lwa_cdhdr
with key objectid = lwa_vbak-objectid.
if sy-subrc ne 0.
continue.
endif.
loop at pa_it_cdhdr into lwa_cdhdr
from sy-tabix.
lwa_merged-username = lwa_cdhdr-username.
lwa_merged-udate = lwa_cdhdr-udate.
lwa_merged-utime = lwa_cdhdr-utime.
lwa_merged-tcode = lwa_cdhdr-tcode.
clear lwa_cdpos.
read table pa_it_cdpos into lwa_cdpos
with key objectid = lwa_cdhdr-objectid
changenr = lwa_cdhdr-changenr
binary search.
loop at pa_it_cdpos into lwa_cdpos
from sy-tabix.
lwa_merged-tabname = lwa_cdpos-tabname.
lwa_merged-tabkey = lwa_cdpos-tabkey.
lwa_merged-fname = lwa_cdpos-fname.
lwa_merged-chngind = lwa_cdpos-chngind.
lwa_merged-value_new = lwa_cdpos-value_new.
lwa_merged-value_old = lwa_cdpos-value_old.
Get description for field - determine date element
clear lwa_dd03l.
read table lit_dd03l into lwa_dd03l
with key tabname = lwa_cdpos-tabname
fieldname = lwa_cdpos-fname
binary search.
lva_dd03l_tabix = sy-tabix.
if sy-subrc ne 0.
select single tabname fieldname as4local as4vers rollname
from dd03l
into lwa_dd03l
where tabname eq lwa_cdpos-tabname
and fieldname eq lwa_cdpos-fname
and as4local eq co_as4local_a.
if sy-subrc eq 0.
insert lwa_dd03l into lit_dd03l
index lva_dd03l_tabix.
endif.
endif.
If data element was found, get description
if not lwa_dd03l is initial.
clear lwa_dd04t.
read table lit_dd04t into lwa_dd04t
with key rollname = lwa_dd03l-rollname
ddlanguage = sy-langu
binary search.
lva_dd04t_tabix = sy-tabix.
if sy-subrc ne 0.
select single rollname ddlanguage as4local as4vers scrtext_l
from dd04t
into lwa_dd04t
where rollname eq lwa_dd03l-rollname
and ddlanguage eq sy-langu.
if sy-subrc eq 0.
insert lwa_dd04t into lit_dd04t
index lva_dd04t_tabix.
else.
lwa_dd04t-scrtext_l = 'Description for field not found'.
endif.
endif.
endif.
lwa_merged-scrtext_l = lwa_dd04t-scrtext_l.
append lwa_merged to pa_it_merged.
at end of changenr.
Only process field changes for this change document.
exit.
endat.
endloop.
at end of objectid.
Initialise work area so we know change document for order has
been processed.
clear lwa_merged.
Only process change documents for this sales order.
exit.
endat.
endloop.
endloop.
endform. " merge_data
*& Form build_field_catalog
text
form build_field_catalog tables pa_it_fieldcat type slis_t_fieldcat_alv.
data:
Local variable
lva_col_pos type slis_fieldcat_alv-col_pos,
Local structure
st_fieldcat type slis_fieldcat_alv.
lva_col_pos = 0.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'VBELN'.
st_fieldcat-ref_tabname = 'VBAK'.
st_fieldcat-ref_fieldname = 'VBELN'.
st_fieldcat-row_pos = '1'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'VKBUR'.
st_fieldcat-ref_tabname = 'VBAK'.
st_fieldcat-ref_fieldname = 'VKBUR'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '6'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'VKORG'.
st_fieldcat-ref_tabname = 'VBAK'.
st_fieldcat-ref_fieldname = 'VKORG'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '6'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'KUNNR'.
st_fieldcat-ref_tabname = 'VBAK'.
st_fieldcat-ref_fieldname = 'KUNNR'.
st_fieldcat-row_pos = '1'.
st_fieldcat-col_pos = lva_col_pos.
st_fieldcat-outputlen = '6'.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'NAME1'.
st_fieldcat-ref_tabname = 'KNA1'.
st_fieldcat-ref_fieldname = 'NAME1'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '15'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'MATNR'.
st_fieldcat-ref_tabname = 'VBAP'.
st_fieldcat-ref_fieldname = 'MATNR'.
st_fieldcat-row_pos = '1'.
st_fieldcat-col_pos = lva_col_pos.
st_fieldcat-outputlen = '6'.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'SCRTEXT_L'.
st_fieldcat-ref_tabname = 'DD04T'.
st_fieldcat-ref_fieldname = 'SCRTEXT_L'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '20'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'UDATE'.
st_fieldcat-ref_tabname = 'CDHDR'.
st_fieldcat-ref_fieldname = 'UDATE'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '10'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'USERNAME'.
st_fieldcat-ref_tabname = 'CDHDR'.
st_fieldcat-ref_fieldname = 'USERNAME'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '6'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'FNAME'.
st_fieldcat-ref_tabname = 'CDPOS'.
st_fieldcat-ref_fieldname = 'FNAME'.
st_fieldcat-row_pos = '4'.
st_fieldcat-outputlen = '8'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'CHNGIND'.
st_fieldcat-ref_tabname = 'CDPOS'.
st_fieldcat-ref_fieldname = 'CHNGIND'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '8'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'WAERK'.
st_fieldcat-ref_tabname = 'VBAK'.
st_fieldcat-ref_fieldname = 'WAERK'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '5'.
st_fieldcat-col_pos = lva_col_pos..
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'VALUE_NEW'.
st_fieldcat-ref_tabname = 'CDPOS'.
st_fieldcat-ref_fieldname = 'VALUE_NEW'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '20'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'VALUE_OLD'.
st_fieldcat-ref_tabname = 'CDPOS'.
st_fieldcat-ref_fieldname = 'VALUE_OLD'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '20'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
endform. " build_field_catalog
*& Form output_report
text
form output_report tables pa_it_fieldcat type slis_t_fieldcat_alv
pa_it_merged type ty_it_merged.
Local variables
data:
lva_formname type slis_formname,
lva_repid like sy-repid.
lva_repid = sy-repid.
lva_formname = 'ALV_USER_COMMAND'.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = lva_repid
i_callback_user_command = lva_formname
i_save = 'A'
is_variant = st_variant
it_fieldcat = pa_it_fieldcat[]
tables
t_outtab = pa_it_merged
exceptions
program_error = 1
others = 2.
endform. " output_report
*& Form alv_user_command
text
form alv_user_command using pa_ucomm like sy-ucomm
pa_selfield type slis_selfield.
Local work areas
data:
lwa_merged type ty_merged.
clear lwa_merged.
read table it_merged into lwa_merged
index pa_selfield-tabindex.
case pa_selfield-fieldname.
when 'VBELN'.
Contract Number
set parameter id 'AUN' field lwa_merged-vbeln.
call transaction 'VA03' and skip first screen.
S_BCE_68001393
when 'USERNAME'.
Username
set parameter id 'username' field lwa_merged-username.
call transaction 'S_BCE_68001393' and skip first screen.
when 'KUNNR'.
Customer number
set parameter id 'KUN' field lwa_merged-kunnr.
set parameter id 'VKO' field space.
set parameter id 'VTW' field space.
set parameter id 'SPA' field space.
call transaction 'XD03' and skip first screen.
endcase.
endform. " alv_user_command
*& Form read_text
text
form read_text using pa_id
pa_inline_count
pa_name
pa_object
pa_text.
Local internal tables
data:
lit_inlines type ty_it_lines,
lit_lines type ty_it_lines.
Local work areas
data:
lwa_lines type ty_lines.
Local variables
data:
lva_tdname like thead-tdname.
refresh: lit_inlines,
lit_lines.
lva_tdname = pa_name.
call function 'READ_TEXT_INLINE'
exporting
id = pa_id
inline_count = pa_inline_count
language = sy-langu
name = lva_tdname
object = pa_object
tables
inlines = lit_inlines
lines = lit_lines
exceptions
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
others = 7.
loop at lit_lines into lwa_lines.
concatenate pa_text
lwa_lines-tdline
into pa_text separated by space.
endloop.
endform. " read_text ENDLOOP.Hi
As per your code here:
"-------------- Changes are made here ----------------
*Extract Material details from vbap
select matnr arktx
from vbap
into table it_vbap
for all entries in it_vbak
where
vbeln eq it_vbak-vbeln
and posnr eq co_posnr_initial. " Here the condition specifies you want to select sales order items where there is no item number, which i beleive shouldnt be the case
" -----------------End of Change ----------------------
Try as below by commenting the Item Number is INITIAL condition:
select matnr arktx
from vbap
into table it_vbap
for all entries in it_vbak
where
vbeln eq it_vbak-vbeln.
"and posnr eq co_posnr_initial.
Regards
Eswar -
Am unable to get the data from Sys.databases when i use where condition for column owner_sid
Hi all,
Help me here when i try am unable to get a data,Can some one help me with a query to get.
If it cant be done can i know why..
select * from Sys.databases
where owner_sid='0x01'
What am trying is to get a login
names from syslogin
table with respect to Sid.
Select a.name,b.name,a.owner_sid from Sys.databases a
Join Syslogins b
on a.owner_sid = b.sid
where owner_sid like '0x01'
Thanks all in Advance.....Below are a couple of examples of how to accomplish the task. Note that SID is varbinary so the literal should not be enclosed in quotes.
SELECT
a.name AS DatabaseName
,b.name AS OwnerName
,a.owner_sid AS OwnerSID
FROM sys.databases a
JOIN sys.server_principals b ON
a.owner_sid = b.sid
WHERE owner_sid = 0x01;
SELECT
a.name AS DatabaseName
,SUSER_SNAME(owner_sid) AS OwnerName
,a.owner_sid AS OwnerSID
FROM sys.databases a
WHERE a.owner_sid = 0x01;
Dan Guzman, SQL Server MVP, http://www.dbdelta.com -
"unable to get printer status" and "server-error-not-accepting-jobs"
I've got an Intel Mac Pro with Tiger. When I accepted the latest update from Apple, I lost all my defined printers! I've re-added a local USB printer and a networked Laserjet - fine. But I also added a Phaser 850 color printer (networked) which used to work fine. It connects ok, and opens the printer queue window, but when it tries to print, it says "Unable to get printer status (server-error-not-accepting-jobs". The queue stays active (not stopped) but the jobs don't move. I've tried deleting the printer and re-making it - same deal. What's going on?
MikeHi Mike,
One think I really dislike about OSX is the Rocket Science needed to just Print!
Might try these two...
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
Might try Printer Setup Repair 5.1...
http://www.fixamac.net/software/index.html -
Unable to get LaserJet M175nw to print over network
I have just installed a new LaserJet 100 Pro M175nw printer on my network. However I am unable to get it to print via the network.
The printer is connected to a ethernet cable and configured with a static IP address on the network
I am using a Windows 7 computer for printing
All internal functions of the printer work correctly e.g. copy, reports
Printing works when connected via USB to a computer
When using the printer via the network:
Scanning works correctly
The embedded web mangement page for the printer works correctly
The HP Print & Scan Doctor diagnostics give the configuration all green ticks
Print jobs stay in the print queue until they change to an error status.
The printer does not seem to recognise the print job at all - no progress message indicating printing document on the console
If the printer is in sleep mode it does not wake up
Test print pages from the HP Installer, from the Windows Printer Property dialog, from Acrobat Reader and from MS Word all fail.
All symptoms remain the same when I turn off the Windows Firewall
Another HP LaserJet 2605dn printer on the network prints correctly on a different IP address but also using the RAW format on port 9100.
I have removed all drivers for other HP printers in case there was a conflict - no change after re-installing the software.
Can anyone suggest what I might have overlooked? Thanks for your help.
This question was solved.
View Solution.I am confused by your last statement, a TCP/IP is a network connection, which is why the universal print driver is suggested.
From what you have described, there is an issue with the print queue. Try running the Print and Scan Doctor :
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03286146
Also, I am not sure if you tried the PCL6 driver or not, but I would like you to at least try it so that I know what its behavior is.
Let me know how that goes and I will get right back with you!
-Spencer -
I just restored my phone, however I have to sign into icloud and the phone is set to the previous owner's email and password. I am unable to get in contact with them. What can I do?
Please help!Hello codyfromseminole,
After reviewing your post, I believe your device is under Activaltion Lock. The following article will provide you with more information about the feature:
iCloud: Activation Lock
With iOS 7 or later, Find My iPhone includes a feature called Activation Lock, which is turned on automatically when you set up Find My iPhone. Activation Lock makes it harder for anyone to use or sell your iPhone, iPad, or iPod touch if it’s ever lost or stolen.
With Activation Lock, your Apple ID and password are required before anyone can:
Turn off Find My iPhone on your device
Sign out of iCloud on your device
Erase and reactivate your device
Important: Make sure to remember your Apple ID and password, and that your password is unique and secure—someone else shouldn’t be able to guess it. For more information, see the Apple Support article Security and your Apple ID.
If you want to give away or sell your device, be sure to erase your content and settings (in Settings > General > Reset > Erase All Content and Settings). When you erase your content, Find My iPhone and Activation Lock are also turned off.
If you no longer have the device, follow the instructions to remove a device you no longer have. For more information, see the Apple Support article What to do before selling or giving away your iPhone, iPad, or iPod touch.
For more information about Activation Lock, see the Apple Support article Find My iPhone Activation Lock in iOS 7.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
ORA-30926: unable to get a stable set of rows in the source tables
hi,
I am loading data from source table to target table in a interface.
Using LKM incremental update .
In the merge rows step , getting the below error.
30926 : 99999 : java.sql.SQLException: ORA-30926: unable to get a stable set of rows in the source tables
please help as what should be done to resolve this.Below is the query in the merge step...
when i run from SQL also, same error
SQL Error: ORA-30926: unable to get a stable set of rows in the source tables
30926. 00000 - "unable to get a stable set of rows in the source tables"
*Cause: A stable set of rows could not be got because of large dml
activity or a non-deterministic where clause.
*Action: Remove any non-deterministic where clauses and reissue the dml.
merge into TFR.INVENTORIES T
using TFR.I$_INVENTORIES S
on (
T.ORGANIZATION_ID=S.ORGANIZATION_ID
and T.ITEM_ID=S.ITEM_ID
when matched
then update set
T.ITEM_TYPE = S.ITEM_TYPE,
T.SEGMENT1 = S.SEGMENT1,
T.DESCRIPTION = S.DESCRIPTION,
T.LIST_PRICE_PER_UNIT = S.LIST_PRICE_PER_UNIT,
T.CREATED_BY = S.CREATED_BY,
T.DEFAULT_SO_SOURCE_TYPE = S.DEFAULT_SO_SOURCE_TYPE,
T.MATERIAL_BILLABLE_FLAG = S.MATERIAL_BILLABLE_FLAG,
T.LAST_UPDATED_BY = S.LAST_UPDATED_BY
,T.ID = TFR.INVENTORIES_SEQ.NEXTVAL,
T.CREATION_DATE = CURRENT_DATE,
T.LAST_UPDATE_DATE = CURRENT_DATE
when not matched
then insert
T.ORGANIZATION_ID,
T.ITEM_ID,
T.ITEM_TYPE,
T.SEGMENT1,
T.DESCRIPTION,
T.LIST_PRICE_PER_UNIT,
T.CREATED_BY,
T.DEFAULT_SO_SOURCE_TYPE,
T.MATERIAL_BILLABLE_FLAG,
T.LAST_UPDATED_BY
,T.ID,
T.CREATION_DATE,
T.LAST_UPDATE_DATE
values
S.ORGANIZATION_ID,
S.ITEM_ID,
S.ITEM_TYPE,
S.SEGMENT1,
S.DESCRIPTION,
S.LIST_PRICE_PER_UNIT,
S.CREATED_BY,
S.DEFAULT_SO_SOURCE_TYPE,
S.MATERIAL_BILLABLE_FLAG,
S.LAST_UPDATED_BY
,TFR.INVENTORIES_SEQ.NEXTVAL,
CURRENT_DATE,
CURRENT_DATE
) -
Unable to get the customer profile in CSC .
Hi Guys,
I'm unable to get the selected customer profile in CSC when i make an AJAX call to some jsp.
Thanks,
AyanHi Kanth
"This page is not available because the necessary security providers have not been configured, or those configuration changes are pending and not yet activated. Please activate the changes and (if necessary) restart the Admin Server to make this page available"
any deployment did you done..did you release those changes...!!! can i ask to restart all the server components & try to login again in Console...!!!!. I hope if you restart one more time..it will set up..
please mark helpful if this helps out -
Unable to get the "Alerts" in the bi dashboard
Hi experts,
I am using Oracle business intelligence standard edition one version, I am using Delivers to send Email. I did all the configuration successfully and I am able send the email. But unable to get the "Alerts" anywhere in the dashboard after clicking save in Delivers.
Please help me to how to bring the "Alerts" highlighted in the BI Dashboard.
Regards,
RajHow about permission on Admin> Previlages > Manage Previlages > delivers make sure it for everyone
Also make sure you have _Delivers folder.
In order to get a list of all the ibots that are sent to you(Interactive Dashboard should be part of your Active Delivery Profile) create a section in your Dashboard and rename that section as _Delivers. That will show all the list of ibots. -
Phone unable to get Host Routing Tables
Hey,
I've been on with Rogers tech support for sometime today.
My originating issue was wireless wouldn't work and everytime i tried to scan for networks the bb would freeze and auto restart. I did a backup and wiped the device and wireless was working yet again.
But now i'm unable to get data services at all, apparently with rogers you're supposed to get EDGE and not edge. You're also supposed to have 8 entries in the Host Routing Table and i have none.
Rogers has wiped the handheld, reloaded all applications to barebones and still the issue persists.
Whenever i try to do a full restore it errors out at reloading WLAN Profiles and options.
Before all this started and it was wiped trying to view WIFI Options an error popped up "Uncaught Exception: padded byte out of range" now i remembered that from memory so the Uncaught part maybe wrong.
Really don't want to drop another $500 on a phone literally 2 years after i spent $400 for this thing.
Thanks
IanI should also add that i tried my dads sim card in my phone and same issue.
Radio Data Activation: Yes
Signal Level: -86dBm
Radio Access: EDGE
Network: Rogers Wireless
IP Address: 10.172.171.13
ICMP Ping Echo: Yes
BlackBerry Registration: No
Connected to BlackBerry: No
BlackBerry PIN-PIN: No
Server Name: GBISXNAC01S08
Email Address: <email address #1>
Connected to <email address #1>: No
Server Name: GBISXNAC01S08
Email address: <email address #2>
Connected to <email address #2>: No
PIN: 24a5d7dd
MSISDN: <my phone number>
Device Type: BlackBerry 8900
Application Version: v4.6.1.94
Platform Version: 4.2.0.69
Thanks
Ian
Maybe you are looking for
-
Hello, I have some problem in parsing Mircrosoft OpenXML file using Oracle 10g Release2 XML Parser for PL/SQL. I use dbms_xmlparser, dbms_xmldom, dbms_xslprocessor packages OpenXML file use "w:" as namespace, so every element has prefix "w:" like <w:
-
Table data in html from word doc
I have a nice looking invoice word doc I would like to use to make a apex report. The word doc has a table with all the numeric data for the invoice, pretty simple. I saved the word doc as html and used a program to strip all the excess html. I put t
-
How do you unload a movie clip after rolling off of a button? This is what I have written but it does not do this. The swf file stays showing after I roll off the button.... on (rollOver) { loadMovie("jeffWoodBioJeff.swf", "target"); on (rollOut) { r
-
Have Nikon 1J1 and want to open file in Raw?
I have Nikon 1J1 and I took pictures in Raw. When I went open file from my Adobe Elements 9 it said it cant open this file. Can someone tell he why and how to fix this? Do I need an update?
-
Change default email text when submitting a form
How do I amend the standard, default text that shows up after a user clicks the submit button of a form? Next to the XML-attachement, this is the standard text that currently shows up: "The attached file contains data that was entered into a form. It