Activity monitor does not show on all desktops/spaces

Hi,
I like to see what my processor load is and so I keep activity monitor running all the time, and I like to be able to see what's happening regardless of which Desktop/Space I'm working in at the time. So I right clicked the activity monitor in the dock and selected Options->All desktops. But although that works in the other apps I've tried, Activity monitor refuses to exist in more than one desktop. Anyone know what to do about it? It used to work in Snow Leopard, but isn't in Lion for me.
thanks!

It works for me with one quirk. If I go to empty Desktop 2 it appears, if I return to Desktop 1 it's hidden behind other windows.
Regards,
Captfred

Similar Messages

Activity monitor does not show processes

When I run activity monitor it will not show any activity. Also, it does not show system memory, disk activity, or network. I think that the CPU section it not running correctly, either. Any suggestions.

Nevermind..... I was using the activity monitor that transfered over from the powerbook!!

Is there any succesful answer to the many questions about not functioning wifi after installing mountain lion? Also when awakes after sleep MB frezees, wifi can´t get active, dock does not show, in general MB does´t respond. All this in mountain lion.

When awakes after sleep MB frezees, wifi can´t get active, dock does not show, in general MB does´t respond. All this after I installed an update of mountain lion.

Try starting up in Safe Mode and see if things are better.
http://support.apple.com/kb/ht1455

PMI Problem (End-to-End Monitor does not show data)

(End-to-End Monitor does not show data)
As I know that XML Messages Alerts T-code: SXMB_NOMI shows all alerts including errors as well I put date Range: 01-01-2008 to 01-08-2008 and filters for "Errors" system does show more then 300 errors
But problem in RWB - End-to-End Monitoring, when I click on display and date range 01-01-2008 to 01-08-2008 its give me graphical overview in right of window
and shows summary:
Errors:                     0 Average
Open                  904 Maximum
Successfully Completed         0 Minimum
Overall:                  904
I thing End-to-End Monitor doesn't get data from PMI...
why does't show any errors, which is shows in SXMB_MONI
Please tell me how to resolve that problem
Thanks in Advanced
Edited by: issue2008 issue on Aug 26, 2008 12:02 PM

Hi,
A destination pointing to the Integration Server is created on the J2EE engine to collect the data for the end-to-end monitoring. If this destination is incorrect or if there are several clients in the system of the integration server, the data may be sent to the incorrect client.
This might be a reason so you can implement the correction of the destination in a manual way as follows:
Open the J2EE visual administrator.
Select the Destination service.
Select the HTTP "pmistore" destination.
Enter the URL for the ICF service spi_gate of the Integration Server in the following form "http://<host>:<port>/sap/bc/spi_gate?sap-client=<xxx>", where 'host' denotes the host of the integration server, 'port' denotes the HTTP port, and xxx is the client of the Integration Server.
Thanks,
Hemant

IOS 7 Calendar Day View does not show any all-day events ?

Hi,
I realize that iOS 7 Calendar Day View does not show any all-day events.
Is this a bug ?
Any help given is much appreciated.
Thanks and Regards.

Mine brings me right up to the current time, or in the case of another day, it takes me to the first appointment of the day.

Tab navigation does not show at all in FP 10 it shows in FP9

Hi,
I have module that is loaded at runtime,
it has simple tab navigation with 3 children,
in FlashPlaer 9 Debug, tab navigation shows fine, even
thought for some reason it looks like linkbar :)
also numericStepper looks like inputBox and ComboBox has no
arrow, (they all look fine in FB 3.2)
in Flash player 10 tab navigation does not show at all, is
there any obvious thing that I am missing ?
I am guessing something terribly wrong with flex styles, but
I am not overriding any styles,
my environment :
vindows Vista 64 bit (although I use jvm 32)
project is build with latest flex sdk :flex_sdk_3.3.0.4589
P.S: I cant attach image here, so I will record video
tomorrow, if that will help.
thanks in advance
Levan

bump :)
anybody , please please :)

How do I eject a dvd that does not show on the desktop

How do I eject a dvd from the drive when it does not show on the desktop? I tried restarting and the drive makes noise but does not eject the dvd.

oldlarry wrote:
How do I eject a dvd from the drive when it does not show on the desktop? I tried restarting and the drive makes noise but does not eject the dvd.
Hold down the mouse button while restarting. This should eject any disc in the drive.

Downloading a dmg file shows in activity but does not show in downloads folder

downloading a dmg file shows in activity but does not show in downloads folder

Maybe
iOS: Unable to import photos to computer
Did it show before?
If you connect to another PC does the iPod show up in My Computer?
Have you installed only camera or scanner programs on your computer?

My ext HD Icon from a portioned drive does not show up on Desktop

I have an external hard drive with two partitions that both showed up on the the desktop. For some reason, one of the partitions stopped showing up on the desktop but does show up when viewed from finder, disk utility, etc.
I ran permissions, relaunched, etc. One of the partitions still does not show up- very frustrating. I looked at info, preferences, etc. and can't figure it out.
I plugged the hard drive into another computer and both show up there...
So any help will be greatly appreciated.
Skip

Hello markshepherd1,
Thanks for using Apple Support Communities.
According to the following article, when you're going through the process of burning a playlist to a disc, you have the option to select "Include CD Text".
If you’re creating an audio CD, choose your options:
Change the recording speed:
Choose an option from the Preferred Speed pop-up menu.
When you burn an audio CD, iTunes automatically uses the best recording speed for the CD. However, if your blank CD is rated for a slower speed than the maximum speed of your drive, or if you experience problems creating CDs, you may want to change the recording speed to match the CD’s rating.
Change the amount of silence between songs:
Choose an option from the Gap Between Songs pop-up menu.
Have all the songs on the disc play at the same volume:
Select Use Sound Check.
Include information that disc players in some vehicles can display:
Select Include CD Text.
iTunes 11 for Mac: Create your own CDs and DVDs
http://support.apple.com/kb/PH12148
Take care,
Alex H.

Satellite Pro U200 - External VGA monitor does not show any output

I have bought this device as used from ebay. It is working fine except that the External VGA connection does not work. I am using win 7 and have it does recognize the external display correctly and I can configure it as an extended display. However the external display does not show anything. The external VGA monitor is fine as it works with other Laptop machines. I have tried using UBUNTU Live CD on this machine and tried to make the external display work (and it can also recongize the external display and configure it) but there is no picture. I also connected the external display to the vga port and then re-booted the machine but still no picture. I have tried changing the bios settings for the display as well but all my actions point to a hardware fault.
I am not sure if it is a manufacturing fault ? Do you know if this issue has been reported earlier to you. Is there a product recall issued for this?
Please advise as I need to connect this external display but am sure that it is a hardware fault with your device.

Hi buddy,
Have you already tested it with factory settings? I mean the preinstalled Windows from Toshiba with all drivers and tools. If you have the Toshiba recovery disk you should boot from this disk and install Windows with all drivers and tools.
Furthermore you can switch between external and internal monitor using FN+F5 key combination. Does this work?

Batch Monitor Does Not Show Compressor Jobs

On one of my systems, Batch Monitor is not showing current compressor jobs, even though the jobs are running in the background -- and running and completing successfully. On the other systems, all jobs are shown in Batch Monitor as they are being compressed.
All processing is done on the local machine (no clusters). All jobs are submitted using the Compressor application....the jobs are basically conversions from one codec of QuickTime to another.
I saw a post regarding this issue, but it didn't appear to be resolved. Any suggestions?
G5 Quad Mac OS X (10.4.6)

So...guess what I learned?
How many cables do you have plugged into your monitor? The set came with a white and blue, and I plugged both in. Apparently, this causes the issue as the two cables are intended to provide dual screens.
Unplug the blue cable from both the computer and the monitor, and then press the "Windows" button with the letter p at the same time. Make sure "Computer only" is selected from the pop-up window, and press enter. This, according to an HP support tech, should fix the problem.
The instructions should make it more clear that both cables are not to be plugged in to a single monitor, but this may also be common sense to people who have experience with dual monitors.
I have not yet left my computer unattended to see if this fixes the problem, so let's keep our fingers crossed.

Shuffle does not show up on desktop or in iTunes

Older iPod Shuffle (2nd version) does not appear on desktop or in iTunes. It does play with earbuds attached so I know it is functioning.Have tried all the suggestions to no avail.
Thanks,
Pete

Are you using the USB cable that came with the shuffle? The 2nd gen shuffle uses the USB cable with a mini-dock at the shuffle end. The USB cable for the 3rd and 4th (current) gen shuffle does not work, because the connector is different.
If you are using the correct USB cable... The shuffle will not continously appear on the Mac's desktop unless it is set to Enable disk use. So "does not appear on desktop" may be OK.
It should appear in iTunes. The latest version of iTunes may hide the sidebar. To show the sidebar, from the iTunes menu bar, under View, select Show Sidebar. With the sidebar visible, the shuffle does not appear under DEVICES in the sidebar when connected?

HT204053 2nd SD Card does not show up on desktop with out Restarting computer.

I have iMac. I use 2 sets (A1-A2 and B1-B2) of dual SD cards for 2 videography cameras. A1 and A2 are identical. B1 and B2 are identical. Initally all SD cards showed up on desktop. They erased in Disk Utility when I'd downloaded the data. Then suddenly w/ no changes to computer or software, only 1 card would show up when I inserted it into the SD slot. If I insert 2nd card, nothing showed up on desktop, in finder or in disk utility. BUT, if I did a Restart, with the 2nd card in the slot, when the computer came back on, behold, there it was. I downloaded the contents, erased it in disk utility. I need to erase 4 32 Gb SD cards and erase them. I'm currently rebooting 3 times to accomplish this. It's a HUGE HUGE time sink to do this every time I want to download from cards. What's going on with the rebook solution? and how can I get back to better functioning? Solutions please. Thank you.

Are you using the USB cable that came with the shuffle? The 2nd gen shuffle uses the USB cable with a mini-dock at the shuffle end. The USB cable for the 3rd and 4th (current) gen shuffle does not work, because the connector is different.
If you are using the correct USB cable... The shuffle will not continously appear on the Mac's desktop unless it is set to Enable disk use. So "does not appear on desktop" may be OK.
It should appear in iTunes. The latest version of iTunes may hide the sidebar. To show the sidebar, from the iTunes menu bar, under View, select Show Sidebar. With the sidebar visible, the shuffle does not appear under DEVICES in the sidebar when connected?

Activity monitor is not showing any processes - why?

Hi there,
I have a new MBP which seems to get really hot for no reason. The CPU temperature is at 68-70°C constantly and I only have mail and firefox running. I opened the activity monitor to see what is taking so much effort and it is not showing me anything. Not a single process is listed. What am I doing wrong?
Thanks for your help!
Claudia

Has this been the case since you bought the computer
or did it once work? Is the computer quite new?
Have you made any changes to the original installed
software such as updates, installation of
third-party software, etc.?
The computer is brand new (bought it in December) and I don't think it ever worked.
Here are two things you might try:
A. Boot into safe mode. Does Activity Monitor work?
Tried it, didn't work.
B. Create a new temporary user account. Log into
that account. Does Activity Monitor work?
Did that. The activity monitor wouldn't work in the test account either.
On the off chance your copy of Activity Monitor is
corrupted you can replace it with a fresh one as
follows:
Restoring Lost OS X
Files
If you erase or otherwise "lose" an OS X system
application or utility (such as Mail or Disk Utility,
for example) you can restore them without having to
reinstall OS X.
Download the shareware utility Pacifist.
Read the documentation. Use Pacifist to extract a
fresh copy of the missing application from the file
archives on your OS X Installer disc. The file
archives are usually found on the installer disc in
the /System/Installations/ folder.
After restoring the application you need to reinstall
the OS X Combo Updater for the version of OS X you
currently have installed. This assures the new copy
of the application is updated to the current
version.
Lastly, it's a good idea to repair permissions.
Well, I downloaded Pacifist and replaced activity monitor and that finally did it. Thank you so much for that suggestion. I spend nearly two hours on the phone with Apple support this morning and they gave up on it. The only useful thing they could contribute is that the problem was probably created when I migrated everything from my PB to the new MBP. Anyways, problem solved. Thank you thank you thank you!
Best wishes,
Claudia
MacBook Pro 2.33 GHz Mac OS X (10.4.8)

Facebook activity feed widget not showing in Chrome - desktop site.

The Facebook activity feed is not working in chrome for a desktop site. It does show in chrome on a mobile phone... Is there a work around for this? Because, it does work on other browsers as well when you visit the desktop site. I have added http, https and not had http in the code as some others said that worked for them. But, it did not work for me. The site that it is not working on is www.mikemineo.com PLEASE HELP!

Hi
I checked the site in Chrome and I see the feeds shows up fine take a look :
I would suggest you to please try clearing browser cache and cookies and check if that helps.
Looking forward to your reply.
Regards
-Anshul

Activity monitor does not show on all desktops/spaces

Similar Messages

Maybe you are looking for