Activity monitor unable to execute queries againest the server?

2012 SQL Serevr SSMS
Activity monitor unable to execute queries againest the server?
any ideas???
ebro

Hi,
Please check if there are useful message in SQL error log. If there is lock the memory message was logged in the error log, you may enable
lock pages in memory option for the SQL Server service account and see how it works.
Also, apply the service pack and updates of SQL Server.
To enable the lock pages in memory option, please see:
Enable the Lock Pages in Memory Option (Windows)
http://msdn.microsoft.com/en-us/library/ms190730.aspx
Thanks.
Tracy Cai
TechNet Community Support

Similar Messages

Unable To Execute Files In The Temporary Directory. Setup Aborted. Error 5: Access Is Denied.

Hi Everyone,
Whenever I install some new software in my new laptop I get this error:-
Unable To Execute Files In The Temporary Directory. Setup Aborted. Error 5: Access Is Denied.
I have tried synchronizing the clocks but it doesn't remove the problem.
These softwares work on another laptop that i have, which also runs windows 7.
Can someone please tell me the solution as this is extremely urgent.
Thanks In Advance.
-Michael

In short:
============
My permissions were all fine, so if anyone has trouble resolving the issue after sorting permissions then make sure you try fully disabling your anti-virus / anti-spyware / firewall applications, because that was the cause for me.
In detail:
============
Problem:
Failed to install this application
- http://www.ssware.com/cryptoobfuscator/download.htm
- on Windows 8.1 x64
- Get error message "Unable To Execute Files In The Temporary Directory. Setup Aborted. Error 5: Access Is Denied."
First Candidate Solution
The issue turns out to NOT be security rights on the Temp folder
ESET Smart Security HIPS Advanced Memory Scanner is the cause
http://kb.eset.com/esetkb/index?page=content&id=SOLN2908&actp=search&viewlocale=en_US&searchid=1392804914417
Instead, I went and turned off all the ESS protections one by one and it turned out to be HIPS that is causing this false positive.
In fact, it is the Advanced Memory Scanner option under HIPS that is causing the error, while the application in question is legit (using Inno Setup and presumably trying to write to the user temp folder, not sure whether just logs or to execute from there)
Furthermore, Smart Security logs have no entries under HIPS even though I ticked "Log all blocked operations" under the HIPS "Advanced setup" - it was quite a journey to find out the cause :)
Thank you. I have the same OS and installed ESET Smart Security as well. And it is resolved now.
I just want to add, that by "Temporarily disable protection" and "Temporarily disable firewall", it doesn't work. You have to disable HIPS, as KristjanL said.

MapiExceptionMdbOffline: Unable to make connection to the server. (hr=0x80004005, ec=1142)

Hello,
We have 2 Exchange 2013 (build 712) servers in a DAG with distinct subnets. Cisco ASA in between was set to have no filtering between servers in subnet.
We cannot add database copies nor move mailboxes.
Tes-Mapiconnectivty fails with
unspaceId : e8a087f1-6197-48df-b094-d5c93a7b6070
Server      : CLI-SRV01
Database    : CLI-MDB01
Mailbox     : SystemMailbox{376e8d54-7154-484a-a0a3-58f22d73236f}
MailboxGuid :
IsArchive   :
Result      : *FAILURE*
Latency     : 00:00:00
Error       : [Microsoft.Exchange.Data.Storage.MailboxOfflineException]: Cannot open mailbox /o=First
              Organization/ou=Exchange Administrative Group
              (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=CLI-SRV01/cn=Microsoft System Attendant. Inner error
              [Microsoft.Mapi.MapiExceptionMdbOffline]: MapiExceptionMdbOffline: Unable to make connection to the
              server. (hr=0x80004005, ec=1142)
In event log:
The Microsoft Exchange Mailbox Replication service was unable to process jobs in a mailbox database.
Database: RDB
Error: MapiExceptionRecoveryMDBMismatch: Unable to open message store. (hr=0x80004005, ec=1165)
Diagnostic context:
    Lid: 55847   EMSMDBPOOL.EcPoolSessionDoRpc called [length=132]
    Lid: 43559   EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=248][latency=0]
Adding database copy fails with
The seeding operation failed. Error: An error occurred while performing the seed operation. Error: Failed to open a log truncation context to source server 'CLI-SRV02.CLI.ch'. Hresult: 0xc7ff07d7. Error: Failed to open a log truncation context because the
Microsoft Exchange Information Store service is not running. [Database: CLI-PFDB02, Server: CLI-SRV01.CLI.ch]
How can I further verify communication from CLI-SRV02 to CLI-SRV01 ?
Any help welcome
/Patrice

Hi,
Let's begin with the following similar thread:
http://social.technet.microsoft.com/Forums/en-US/b651d65c-92f3-460c-b555-247acb8e6fd7/recovered-exchange-2013-arbitration-system-mailboxes?forum=exchangesvravailabilityandisasterrecovery
It is the same error in the event log with you when moving mailboxes. And it can be resolved by recreating the mailboxes.
Additionally, to check the network connection between two servers, I recommend you use the network monitor to catch the package.
Thanks，
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Angela Shi
TechNet Community Support

Unable to find workbook in the server

When we run 3.x workbook in 7.0 we are getting the following pop-up 'Unable to find workbook in the server'. We were able to open the workbook in the 3.x. Did any one face the same issue.The trace showns authorization are good. Pls. Help!!

Hi,
on thing I noticed... SP 13 is not that stable...
Hint: ask your technical guys to implement support pack 14... I think your problem will be solved then... because you say you only have this problem since you upgraded...
Ciao
Joke

New Local Move Request - Error: MapiExceptionLogonFailed: Unable to make connection to the server.

I am in the process of doing a migration from SBS 2003 std. edition to SBS 2011 std. I am at the point the migrating mailboxes from the Exch 03 server to the Exch 2010 server. I initially received an error when selecting mailboxes that the mailbox
db on the Exch03 server did not exist. I followed the resolution steps from another forum post to add the Exch 2010 server to the "first administrative group" via the security tab and give full permissions. This solved that issue and
I was able to proceed through the wizard to actually create the local move request. However, after processing the request, I get the following error...
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:00:03
<username>
Failed
Error:
Mailbox database '0180b88c-0cb2-4b2f-981a-6bdaecc10fcb' is offline.
MapiExceptionLogonFailed: Unable to make connection to the server. (hr=0x80040111, ec=1010)
Diagnostic context:
    Lid: 13720   dwParam: 0x6D9      Msg: EEInfo: Flags: 0
    Lid: 11672   dwParam: 0x6D9      Msg: EEInfo: NumberOfParameters: 4
    Lid: 8856    dwParam: 0x6D9      Msg: EEInfo: prm[0]: Unicode string: ncacn_ip_tcp
    Lid: 8856    dwParam: 0x6D9      Msg: EEInfo: prm[1]: Unicode string: <Exch03server>.<domainname>.local
    Lid: 12952   dwParam: 0x6D9      Msg: EEInfo: prm[2]: Long val: -545057711
    Lid: 12952   dwParam: 0x6D9      Msg: EEInfo: prm[3]: Long val: 382312662
    Lid: 45169   StoreEc: 0x824
    Lid: 44273
    Lid: 59431   EMSMDB.EcDoConnectEx called [length=114]
    Lid: 34855   EMSMDB.EcDoConnectEx returned [ec=0x3F2][length=56][latency=4]
    Lid: 56945
    Lid: 59431   EMSMDB.EcDoConnectEx called [length=114]
    Lid: 34855   EMSMDB.EcDoConnectEx returned [ec=0x3F2][length=56][latency=4]
    Lid: 59505   StoreEc: 0x3F2
    Lid: 52465   StoreEc: 0x3F2
    Lid: 60065
    Lid: 33777   StoreEc: 0x3F2
    Lid: 59805
    Lid: 52209   StoreEc: 0x3F2
    Lid: 19778
    Lid: 27970   StoreEc: 0x3F2
    Lid: 17730
    Lid: 25922   StoreEc: 0x3F2
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&t=exchgf1&e=ms.exch.err.ExC2B9A8
Exchange Management Shell command attempted:
'<domainname>.local/MyBusiness/Users/SBSUsers/<username>' | New-MoveRequest -TargetDatabase 'Mailbox Database 2011012823'
Elapsed Time: 00:00:03
I have tested running the command from the EMS and get the following...
Mailbox database '0180b88c-0cb2-4b2f-981a-6bdaecc10fcb' is offline.
    + CategoryInfo          : NotSpecified: (0:Int32) [New-MoveRequest], RemoteTransientException
    + FullyQualifiedErrorId : AC277C79,Microsoft.Exchange.Management.RecipientTasks.NewMoveRequest
On the Exch03 Server I have verified/tested/done the following:
--Verified the Information Store Service is running
--Tested restarting the service
--Verified the Mailbox store is mounted
--Tested Dismounting and mounting
--Tested the Exch2010 mailbox db store is functioning properly by creating a test account and verifying w/ OWA.
--Verified routing group b/w servers
--verified network connectivity b/w servers
--Verified DNS is functioning properly on both servers
--Installed Exchange Server MAPI Client and CDO 1.2.1 on Exch2010 server.
--Tested rebooting both severs
I am at a loss. Any ideas would be greatly appreciated. I am unable to continue w/ the migration until I get past this step.

Hi,
Thank you for sharing the resolution.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Thanks Gen Lin-MSFT

Unable to automatically step into the server. the remote procedure cannot be debugged.

Hi,
I am trying to deploy report using ssis script c# code.I am using the proxy for ReportingService2010 and following code is giving the error.
code:
ReportingService2010 rs = new ReportingService2010();
rs.Credentials = System.Net.CredentialCache.DefaultCredentials;
rs.CreateFolder("MSI Report Demo", "/", null);
Error:
unable to automatically step into the server. the remote procedure cannot be debugged. This usually indicates that debugging has not been enabled on the server.
Please share the idea on it.
Thanks in advance.
-Gautam

just make a trust between to domain and it works .

Unable to execute Actions for the Existed Employees in the Upgrade Server

Hi,
We have Upgraded from ECC 5.0 to ECC 6.04
In ECC 6.04 we are unable to Execute further Actions for the Existed employees where as if we create New employee its allowing to execute Actions in the system.
Awaiting for your valuable suggestions.
Sai

Could you please provide more information on the error message while executing the action for exited employee ?
Thanks
Ravikumar

Activation is locked on my phone and the server is down

Find my phone is requiring that I activate with my apple id and password but it won't activate - keep getting a message that the server is down. Anyone know how to get my phone working?

Were you running iOS 7 beta? If so, as a developer you need to log into the Developer forum for assistance.
Not a developer and running iOS 7 beta? Then you've stolen Apple's software and will receive absolutely no assistance from this forum. Enjoy your iBrick!

Unable to execute queries

Hi ALL,
while trying to execute query, i get the following error message
Exception in BI runtime
Command type SWITCH_AXES of object not recognized
Parameter GENERAL_TEXT_ELEMENT not recognized; check your metadata
Initial cause
Message:
Error while loading the Web template "0ANALYSIS_PATTERN" (return value "4")
Need help
Regards
Sanju

Hi Malli,
Now I have the same error in web report.(BI system have SPS15)
I think, SPRO default web template settings for 7.0 ,
if i want to use SAP default template, no need to set the parameter of web template name into SPRO.
I used to do that, and got good result (BI system had around SPS7).
But, current BI system(SPS15) might need another settings.
Do you know more ?
Thanks in advance,
Kanako

Unable to activate debugging on the server

Hello,
At the Developer Studio at the J2EE Engine tab view there is an option to Enable debugging on the portal server (By right-clicking on server0).
The problem is that all this menue is shaded and unavailable to me. What should I do in order to be able to use the features ?

Sorry I said VA before - I meant go into the configtool.
In there click on your instance and the on the right pane click on the tab Servers Debug. The top option Debuggable has to be checked.
Hope this elps

Unable to alter the process. Unable to execute action start and stop

Hi,
I have setup a UCM CMS server on Linux. In the UCM instaance I setup If I go to Admin Server, the Genral configuration page contains no entry. While the file Config.cfg present in the directory Oracle/UCM/Server/Config/ contains all the entries I provided during the setup.
Now when I am trying to start/stop the UCM instance, it is giving me error " Request Failed : Unable to alter the process. Unable to execute action 'stop' on server 'EBIZ_UCM'." While If I try to restart the server using IdcServer present at the location Oracle/UCM/Server/bin/, it is getting started.
While clicking on the Component Manager, its giving error like :
" Unable to retrieve component data. Components.hda exists, but contains no data. ".
Please suggest.

I know this is an old thread, but I ran across this while having a similar problem. It turned out that I had started the admin server incorrectly (e.g. running /apps/oracle/ucm/server/admin/bin/IdcAdmin instead of /apps/oracle/ucm/server/admin/etc/idcadmin_start). Once I corrected that the problem went away.

I compressed Activity Monitor and deleted the compressed file in error. How do I get it back?

In trying to reduce my CPU load, I compressed the Activity Monitor. Before I can use the compressed file, I mistakenly deleted it and now when I try to open it, I get the dreaded spinning wheel. After a long wait, I forced quit.
What happened and how do I get Activity Monitor back?

Never tamper with programs which come with the system. You could try downloading and applying the 'combo updater':
http://support.apple.com/kb/DL1399
However this won't help if Activity Monitor hasn't been updated since the initial release, which may well be the case. In that event you will need to reinstall Snow Leopard from your original install disks and then apply the combo updater again.
Alternatively it may be possible to extract Activity Monitor from the installed disk by using Pacifist - no promises about that.

Why does my macbook pro keep showing me the force quit screen and states that there is not enough memory? The activity monitor shows that there is plenty of memory available.

The message displayed in the Force Quit Applications window says "Your Mac OS X startup disk has no more space available for application memory. The only applications that I have open are Safari and Finder and I am simply reading a discussion board.

It would appear that this error can be caused by an excessive system demand for swap space that exceeds the maximum allocation. Just try restarting the computer.
I found a possible solution for finding the cause of the error. Open Activity Monitor. Be sure you have the Real Memory column showing and the Processes dropdown menu set to All Processes. Select the Real Mem column and sort in descending order. Leave Activity Monitor open. The next time the error appears the application at the top of the column is the one causing the error.

ANN: SSAS Activity Monitor 1.0 released!

Hi All.
I hope notifications about new tools is not against rules here and I'd like to
just notify that we released for testing new SSAS tool - SSAS Activity Monitor.
What are happen behind the scenes of SSAS servers and how to analyze if your BI applications efficient or not? With SSAS Activity Monitor, we tried to answer some of the questions in this area, connected to analysis of overall server performance, sessions
and connections statistics and resource usage in time. To minimize impact of SSAS servers, we tried to get most of the information from minimal amount of server statistic queries and we bring it to you in convenient way - with rich UI.
Features
- Provides resource usage and activity information about the currently opened sessions and connections on the server. We do not try to present just plain table data. Instead, we try to present trends (increase/decrease), percentage values of CPU and per
second values which are not available in original server statistics.
- Complete Locks information. Among table data, locks are displayed on Activity Graph.
- Activity History. You run monitoring tool for a while and the tool decides which data points should be saved for future review. Based on CPU and other resources usage, SSAS Activity Monitor decides if current snapshot of server activity should be saved
or not. Developers and administrators can review such snapshots at any time later, via single mouse click on highlighted points (markers) in Activity History chart.
- Activity Graph. Sessions and connections in convenient live graph.
- Docked windows as the way to optimize analysis. Standard tabbed interface does not restrict you to show and analyze data from different servers side by side.
- Ability to kill sessions.
And more - under development...
We would love to hear any feedback, comments, etc. Welcome!
Our homepage: WWW. SSASTOOLS.COM
Best regards,
Matt

Hi MattStep,
Thank you for your informtion.
Regards,
Charlie Liao
TechNet Community Support

Os x Mavericks - Activity Monitor won't display

after I upgraded my Mac Mini to Mavericks, I am unable to display the Activity Monitor. I have run the disk utility to repair permissions, and I've verified the drive. I've looked in the console for any error messages related to the launch of Activity Monitor and found none. The top menu bar for the activity monitor appears, and I can select the pull-down menus. My Macbook Air successfully upgraded to Mavericks, and the activity monitor works there.
Can anyone offer some help on this? Thanks.

I've signed on with two different user id's and the activity monitor works perfectly. It must be something in this particular user id. Also, when I click on the Finder icon, the top bar greys out, but I can go to it and select "file - new finder window" and I get the finder window. What should I look for?

Activity monitor unable to execute queries againest the server?

Similar Messages

Maybe you are looking for