Activity planning error

Hi All,
I am facing a problem in KP26. I have defined a activity type and need to assign fixed price & variable price to the activity type. Accordingly i have assigned a fixed price for 10 HR & variable price for 15 HR and the per hour rate is 25Rs/HR.
During my costing run the planned price is getting picked accordingly (625 Rs), but during the production order processing only the variable price is getting displayed (375 Rs) as the total planned price.
Also if i maintain the activity type as only fixed 25 HRS, it is appearing in costing run(625 Rs), but not during production order processing (0 Rs).
If maintained as variable only it is appearing in both the cases.
Suggest a appropriate solution. Thanks in advance.
Regards,
Nishant Kansara

Hi Neelima,
I will again you the scenario in detail. I have done activity planning for a activity type 'Labour' and during the planning of that activity type in KP26 i need to assign fixed price & variable price to the activity type. Accordingly i have assigned a fixed price for 10 HR & variable price for 15 HR and the per hour rate is 25Rs/HR.
When i do a costing run CK11N the planned price is getting picked accordingly (625 Rs),for that activity type but during the production order processing only the variable price is getting displayed (375 Rs) as the total planned price on the production order.
Further if i maintain the activity type as only fixed 25 HRS, it is appearing in costing run(625 Rs), but not during production order processing (0 Rs). and If maintained as variable only it is appearing in costing run as well as on the production order.
I have also checked the following settings
Controlling -- prod.cost controlling -- cost object controling -- prod.cost by orders -- manufacturing orders
T.CODEs -- OPL1 for costing varient
OPN2 for valu.variant.
Hope this clarifies your doubt
Regards,
Nishant

Similar Messages

"no active plan version exists" while adding system in partner profile

Hi,
i am getting "no active plan version exists" while adding logical system in partner profile. while duble click on this it showing "set active plan version".
Can anyone answer me how to do the set active plan version. I asked my functional team and they didnt know how to set it.
Thanks,
Gowthaman.

Thanks Sonia,
in OOAP i could not able to edit so i maintained plan version in OOPV and in sm30 in table T77S0 maintained PLOGI group.
Now i am getting different error while creating partner profile in we20..
*Object type US, ID CENTRALADMIN unknown (please observe upper/lower case)*
    *Message no. E0624*
*Diagnosis*
    *Object CENTRALADMIN of type US is not known in the system.*
*Procedure*
    *Enter a valid object and check the type.*
    *Make sure upper case and lower case are used correctly.*

Active X Error when running web checkout/web reports

Hi,
I am installing BO Planning X1.5 against a SQL Server database.
However, I am getting an Active X error when trying to launch web checkout/web reports.
I get to the log on page and then get the error message:
"There was an error initializing the ActiveX client"
Do you know why this would be? (I am able to get to the web checkout/web reports from the server, however not on any client machine)
Thanks.

Hi Ravi,
from Note 917950:
Test Standard Web Template in BI (both directions)
This test will check the ABAP to Java and Java to ABAP communication. Additionally, this check will ensure that the new Java-based BEx Web runtime is working.
1. Run Report RS_TEMPLATE_MAINTAIN_70
2. Enter Template ID 0ANALYSIS_PATTERN
3. Choose Program / Execute
4. Choose Analyse / Validate
5. Choose Analyse / Execute in Debug Mode
A Web Browser is opened and you have to logon to the Portal. Finally, an empty Analysis Pattern (without data) should appear.
Error messages during executing Web Template
If only a blank screen or message "Access Denied" appears, see note 872043.
If message "Error while loading the Web template "0ANALYSIS_PATTERN" (return value "5")" appears, activate Content (see topic Additional Information below).
--> I think you have to activate the Content....
Activate Web Template of BI Content
Please perform the following steps to activate a Web Template of BI Content:
1. Logon to BI System
2. Start transaction Data Warehouse Workbench (transaction code RSA1)
3. Choose register Business Content (left pane)
4. Select Object Types
5. Expand BEx Web Template in tree (middle pane)
6. Double click on Select Objects
7. Choose 0ANALYSIS_PATTERN (or any other Web Template of the BI Content)
8. Object will be transferred to right pane
9. Press button Install / Install to activate the Web Template
Now, you can execute the activated Web Template.
Links:
"0ANALYSIS_PATTERN"
Re: template 0ANALYSIS_PATTERN returns errors
Error loading template 0ANALYSIS_PATTERN while broadacasting through WAD
917950 - SAP NetWeaver 2004s: Setting Up BEx Web
[SAP NetWeaver Setting Up BEx Web|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/ca6de811-0c01-0010-43b2-c64584eef943]
Re: Question about Bex Web Setup
Regards
Andreas

HOw to set our Existing Active plan version to The new Created Client.

Hello experts,
I have create two new Clients for idoc processing .
But when i am creating partner profile for my Model View the system gives an "error that no active plan version exist."
is there any way to solve this problem ????
Regards,
Dakshaini.
Moderator message: only one thread per issue, please.
Edited by: Thomas Zloch on Oct 14, 2011 3:43 PM

Please try uncommenting the following line in your method call.
* IS_PRINT = GS_PRINT
Regards,
Rich Heilman

I am trying to download an epub book from the library, which I have been doing for almost a year. Now I am being asked for my adobe id, which I enter and I get an error message stating Adobe Activation Request Error:2004.. What's this ?

I am trying to download an epub book from the library, which I have been doing for almost a year. Now I am being asked for my adobe id, which I enter and I get an error message stating Adobe Activation Request Error:2004.. What's this ?

I downloaded Blue Fire Reader and it requested an adobe id. I clicked on the link that was in the error message stated http//adeactivateadobe.com. Found out that if the date and time on my Ipad is wrong that it won't let me download a book. I was off 5 hours. I reset my clock settings and adobe id let me download a book from the library. I am back to using Overdrive and adobe again on my ipad.
Thank you.

Diff: Version on workflow builder and Maintain Active Plan version on SWU3

Group,
Can any one help me to understand the Version on workflow builder and Maintain Active Plan version on SWU3
Thanks in advance !
Richard A

Dear Richard Antony,
The Versioning in the Workflow is very important its some what simmilar to the version on any SAP Objets like Tables, Program etc.
Here Suppose any change comes in working workflow, then in stead of directly change them you can create a version of them and them modify it. So that you can reverst back to that version if required.
Like wise there is lots of importance of versioning Workflow.
The Active Plan version is also important to establish at SWU3. As all the Workflow is using Organization management which is very depended on the Active Plan version. so based on which Plan version you want to use you can Provide in SWU3 to tell Workflow system to use this.
Hope this will give you a clear picture.
Regards,
Chandrashekhar.

Pop-Up Menus and active content errors - Help!

I'm attempting to add pop-up menus to my navigation bar, to
make my site more user-friendly, but to no avail:
I've tried designing pop-up menus in Fireworks, then
importing the html code in, but that gives me errors when I try to
insert the bar. Then, I tried putting my menus in different layers,
with a "show layer" behavior on the button, and a "hide layer"
behavior attached to the roll-off of the layer, but my version of
Dreamweaver won't attach a behavior to a layer.
Then, I noticed the tech-note on this site for the fix to use
pop-ups in a template, so I added pop-up menus directly to my
navigational buttons using the wizard. So here's where my problem
comes in. . .
When I preview my page, it throws up an active content error,
but will still run. I uploaded it to my remote server, but when I
went to the url, no action takes place when I put my cursor over
it. Anybody have any ideas on how to create a pop-up menu that
won't throw up an active content error? I've seen them on plenty of
websites before, but can't figure how to do them.
Any light you could shed would be greatly appreciated!

> I'm attempting to add pop-up menus to my navigation bar,
to make my site
> more
> user-friendly, but to no avail:
Sometimes, they make your site less user-friendly. So be
careful.
The DW/FW pop-up menus are usually something that should be
avoided. They
are very poorly thought out and implemented, and will likely
cause you
continuing problems. It's foolish to devote the time to them
that could be
more effectively be placed elsewhere, especially since there
are better
options that work right out of the box, so to speak. Please
check the free
and commercial options here -
http://www.projectseven.com/.
> Any light you could shed would be greatly appreciated!
Don't use DW/FW pop-up menus.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Ally86" <[email protected]> wrote in
message
news:[email protected]...
> I'm attempting to add pop-up menus to my navigation bar,
to make my site
> more
> user-friendly, but to no avail:
>
> I've tried designing pop-up menus in Fireworks, then
importing the html
> code
> in, but that gives me errors when I try to insert the
bar. Then, I tried
> putting my menus in different layers, with a "show
layer" behavior on the
> button, and a "hide layer" behavior attached to the
roll-off of the layer,
> but
> my version of Dreamweaver won't attach a behavior to a
layer.
>
> Then, I noticed the tech-note on this site for the fix
to use pop-ups in a
> template, so I added pop-up menus directly to my
navigational buttons
> using the
> wizard. So here's where my problem comes in. . .
>
> When I preview my page, it throws up an active content
error, but will
> still
> run. I uploaded it to my remote server, but when I went
to the url, no
> action
> takes place when I put my cursor over it. Anybody have
any ideas on how
> to
> create a pop-up menu that won't throw up an active
content error? I've
> seen
> them on plenty of websites before, but can't figure how
to do them.
>
> Any light you could shed would be greatly appreciated!
>

Trying to activate win 8.1 and tablet get activation sever error

finally remembered my password- now I get "activation sever error" what is this???

finally remembered my password- now I get "activation sever error" what is this???

How to get active plan version dynamically

Hi all,
I am making some HR reports in which I am pulling up position long text from hrp1001 by giving condition - where plavr = '01' . Now if the active plan version is not 01, my condition becomes vague.
Please let me know how to determine the active plan version dynamically in my sample code below
SELECT APERNR AOTYPE B~STEXT INTO CORRESPONDING FIELDS OF TABLE ITAB_EMP_DEATILS3 FROM PA0001 AS A
INNER JOIN HRP1000 AS B ON BOTYPE = AOTYPE AND BOBJID = APLANS WHERE ( BOTYPE = 'S' AND BPLVAR = '01' AND AENDDA = '99991231' AND BENDDA = '99991231') AND A~PERNR IN PNPPERNR.
SORT ITAB_EMP_DEATILS3 BY PERNR.
DELETE ADJACENT DUPLICATES FROM ITAB_EMP_DEATILS3.

Simply call FM RH_GET_PLVAR

While check in an activity got activation failed error

Hi All
When i clicked an activity and select Check in option it shows the Activation window .Then when i clicked on Activate button i am getting Activation failed error.Below is the error message:
Activation failed: Incorrect content-type found com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.ContentTypeImpl 3021c6 Service call exception; nested exception is:
java.lang.Exception: Incorrect content-type found com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.ContentTypeImpl 3021c6
Can any body help me in solving the above error message so that Activation of activity will be successful?
Thanks
Susmita

Just check the full hostname of your DTR server, should be like
hostname.company.com
and check if somewhere only
hostname
is being used.and both are getting successfully pinged. DO not try the NWDS ping. Use command prompt and
ping hostname
and
ping hostname.company.com
Also this happens due to some clash with some other developer. Please check after some time, may be after a desktop restart. things should start working.
Edited by: Varun Biswas on Nov 29, 2011 11:53 PM
Edited by: Varun Biswas on Nov 29, 2011 11:53 PM

An Active Directory error 0x51 occurred when trying to check the suitability of server

We have several exchange administrators and two exchange 2010 servers and one exchange 2007 server. I am getting the following error message
when opening up Exchange Management Console on one of the exchange 2010 server.
"An Active Directory error 0x51 occurred when trying to check the suitability of server 'dc101.domain.local'. Error: 'Active directory
response: The LDAP server is unavailable.'
dc101 does not exist anymore. I tried changing the Configuration Domain Controller by manually specify a domain controller but get the exact
same error message and also gets an empty list when selecting the domain. Other administrators who logs into to the same server do not get this error message.
If I open the exchange management console on another exchange server, it works without problem. Is there a setting somewhere I need to change
to point it to the correct domain controller using power shell?

I fixed it for myself.
Organization Configuration->Modify Configuration Domain Controller->select Use a default domain controller

Activation server error on ADE 3.0

Hi!
I unistalled ADE 4.0 and installed 3.0 because 4.0 wouldn't let me open .acsm files or transfer them to other devices. Now, on ADE 3.0, when i try to open an .acsm file, it comes up with a computer autorisaton window which reads "activation server error - code E_ADEPT_INTERNAL"
when i checked both the device and computer authorisation, it says that they are both authorised.
please help!

It is important that the shared_pool value be specified in bytes. For example:
shared_pool= 100000000
If you are running on 9i, another possibility is that the shared_pool setting is not taking effect
when the database is bounced. In 9i there is a new startup file called the "spfile". This is just
like the init.ora file with the following differences:
1. It cannot be edited by a standard editor. It is a binary file.
2. Any system changes to the database while the instance is running (e.g. via alter system) are automatically
written back to the spfile.
By default, when the 9i database starts up, it first looks for the spfile. If it finds one it uses the
settings defined in it. If it doesn't, it looks for the init.ora file.
When a 9i database is installed both init.ora and spfile.ora are created for the instance by default. Changes to
init.ora are not seen by spfile.ora unless the "create spfile" command is used to sync them up.
To get around this behavior, there are several options:
1. remove the spfile so that only the init.ora file exists. The database will then use init.ora exclusively.
2. sync up the init.ora file and spfile.ora file using:
create spfile='spfile.ora ' from pfile='init.ora'
where 'spfile.ora' and 'init.ora' are replaced with the appropriate names for your instance.
3. Explicitly reference the init.ora file when starting up the database using:
startup pfile='init.ora'
where 'init.ora' is replaced with the appropriate name for your instance.
-Todd

Active Directory error "-2147016672"

Hi,
I am creating a script in ASP.NET C# to invoke cmdlets from Lync Server.
I want just list a user : Get-CsUSer and when i run the script i received the follow error code:
Active Directory error "-2147016672" occurred while searching for domain controllers in domain .
I run my script from my local machine developer (it is remote) to the server. The script is :
Runspace remoteRunspace = null;
openRunspace("servidor:5985/wsman", "http://schemas.microsoft.com/powershell/Microsoft.PowerShell",
@"\user", "senha", ref remoteRunspace);
using (PowerShell powershell = PowerShell.Create())
powershell.Runspace = remoteRunspace;
powershell.AddScript("Import-Module Lync"); //funciona
powershell.Invoke();
Pipeline pipeline = remoteRunspace.CreatePipeline();
string remoteScript = "Get-CsUser -Identity mmiranda";
pipeline.Commands.AddScript(remoteScript);
Collection<PSObject> results = pipeline.Invoke();
remoteRunspace.Close();
return results;
public static void openRunspace(string uri, string schema, string username, string livePass, ref Runspace remoteRunspace)
System.Security.SecureString password = new System.Security.SecureString();
foreach (char c in livePass.ToCharArray())
password.AppendChar(c);
PSCredential psc = new PSCredential(username, password);
WSManConnectionInfo rri = new WSManConnectionInfo(new Uri(uri), schema, psc);
//rri.AuthenticationMechanism = AuthenticationMechanism.Default;
//rri.AuthenticationMechanism = AuthenticationMechanism.Kerberos;
//rri.AuthenticationMechanism = AuthenticationMechanism.Basic;
//rri.NoEncryption = true;
rri.ProxyAuthentication = AuthenticationMechanism.Negotiate;
remoteRunspace = RunspaceFactory.CreateRunspace(rri);
remoteRunspace.Open();
i don't know what to do anymore.
Help me.
My e-mail [email protected]
thx

Hi,gersonczjr
Would you please verify that the user account you used has all the required permission?
Would you please use DCDiag tool to check the DC connectivity?
Although I am not very familar with scripts,I remeber I have seen a similar case with running Get-CsUser using C# is fixed by called
Enable-PsRemoting on ther server,you can try it to see if it also works for you.
Regards,
Sharon
Sharon Shen
TechNet Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question.

Active Directory error using Upgrade Mgmt Tool - BI 4.1 sp 3

I am in the process of creating a new BI 4.1 SP 3 environment within out company. The software has been installed and I wanted to perform a Complete Upgrade from our existing XI 3.1 sp5 environment into our new 4.1 environment. Also, we are using Windows Active Directory authentication and AD groups for security.
The Upgrade Mgmt Tool fails with an Active Directory Error message similar to the one below:
Active Directory Authentication failed to get the Active Directory groups for account with ID <insert really long alpha numeric string here>; CN=<insert name of employee no longer working for the company>. Please make sure this account is valid and belongs to an accessible domain.
Well, the account is not valid because this executive no longer works here. Most likely within Active Directory all groups owned by this person were transferred over to his replacement. Is there an way to have the upgrade mgmt tool bypass this validation check? Or does anyone have any other suggestions how to get around this error? Once this error occurs I can't upgrade. I guess the alternative is to do an incremental upgrade, group by group, until I find the offending group but I was wondering if there was an easier way as that will be very time consuming.

@JRKPrasad Thank your for your thoughtful and accurate response. It took less than 2 minutes to update AD in BI 3.1.x and the UMT tool is off and running migrating content from BI 3.1 to our new BI 4.1 environment.
Again, thank you very much for reading my post and responding. It was a huge timesaver.

Activity planning price Table

*Hi experts,
Will u plz tell me when i do KP26 the activity planning price stored in which table or how i put some activity price from fixed to variable which is i wrongly posted ?*
Best Regards,
Debashis

Table for Variable Price

Activity planning error

Similar Messages

Maybe you are looking for