Activity prices are not matching compare to previous year

Dear Sap Guru's,
Activity prices are not matching for the year 09 compare to 08.But standard cost estimation is correct.how it is possible.can you guide me how system calculates activity prices.
Ex: My client having business in egypt.Last year they started thier business at this time activity prices are maintained for INDO OH :13.81, Labur 0.44 per Min plan price 1.It is common for whole year -08.
Now I copied the same activity prices for this year through kp97 by selecting object currency for both plan and cost.under planning currency tab.
Activity prices are showing for IND oh is 17.14 ; instead of 13.81 and labour it is showing 0.55 instead of 0.44.
Pls guide me.
Regards
KUMAR.

Hi,
guess you are using a controlling area currency (A) thats different from company code currency (B).
First check if the prerequisites within KP97 / button "planning currencies" are met when ticking "object currency" and using the F1-help especially the point
"It only makes sense to activate this indicator if you have activated all
currencies
1. when copying: in the source and target versions".
Whatever the reason is, your KP97 copy did the following thing:
For each CO area and plan version there are settings for each fiscal year to be made (IMG: Controlling / General Controlling / Organization / maintain versions, mark the relevant version choose "Controlling area settings", mark it again and choose "settings for ecah fiscal year".
Compare your 2 fiscal years, which exchange rate type (can be different, normally its "P") and value date (its often the first day of the new FY) is used?
If you have a difference in minimum one of the mentioned settings in CO version you might have different act. prices in comp. code currency.
Your KP97 process copied the values in controlling area currency (A) and converted this numbers to comp. code currency (B) based on your CO-version settings.
Best regards, Christian

Similar Messages

Reports of leading & non -leading ledgers are not matching

Reports of leading & non-leading ledgers are not matching in the trial balance
report from t.code S_PL0_86000030 . Both should be matched but not matching. Leading ledger report
has been taken by giving the data (Currency:10, Company code: IN06,
Ledger: 0L, Fiscal Year: 2008, From period:1, To period: 16)
And non-leading ledger report has been taken by giving the data
(Currency:10, Company code: IN06, Ledger: AI, Fiscal Year: 2008, From
period:1, To period:9)
And account codes are not same in both the reports. If one account codes
is there in one report it is missing in other report.
Balance sheet for the period from April 2008 to March 2009 has to be finalised based on the non-leading
ledger report.
1.Non-leading ledger is acitivated .Fiscal year activated Jan to Dec-K4 .IN this case how can I enter the periods for to view leading ledger and non-leading leader reports and compare the reports.
help to solve the issue.
Regards
dharmendar

Hi,
Thanks for your inputs. I have 2 queries here...
1. Whether the reports S_ALR_87013542 & CN41 are same displaying the same information?
2. How can I check the Balance amount still remaining in the project? Is there any report?
Thanks & regards,
Bala

OBIEE 11g Report-When drilling down to lower level, totals are not matching

Hi All,
I am creating a report in Analytics 7.9.6.3 , OBIEE 11g - Let’s say Budget Cost/Actual Cost based on the Date Dimension
Have selected the Fiscal Year Dim, Fact Budget Cost, Fact Actual Cost
FY BCost ACost
2011 100 120
2012 150 140
Total 250 260
But here when I am drilling down from Year to Quarter and Period - The values are not matching with the totals....
FY FY Qrt BCost ACost
2011 2011 Q1 80 100
2011 Q2 100 90
2011 Q3 110 120
2011 Q4 90 130
Total 380 440
Fiscal Year, Fiscal Quarter Budget Cost and Actual Cost are not returning correct results – When selecting cost's by fiscal year, or filtering on a specific fiscal year, the amount returned does not equal the fiscal year total;
when I am drilling down to Quarter and Period Level the BCost & ACosts are bumping the Numbers as above and not matching with totals
Any suggestions?

Check out the query in both the times.Execute against database and try to sum the data for quarter/period and compare it with Year data.
Just try to differentiate is it a report total that is getting wrong or the data in the database table itself is getting wrong stored.
Mark as helpful if it helps.
Regards,
Veeresh Rayan

When drilling to lower level - Totals are not matching in BI Analytics OOB

Hi All,
I am creating a report in Analytics 7.9.6.3 , OBIEE 11g - Let’s say Budget Cost/Actual Cost based on the Date Dimension
Have selected the Fiscal Year Dim, Fact Budget Cost, Fact Actual Cost
FY BCost ACost
2011 100 120
2012 150 140
Total 250 260
But here when I am drilling down from Year to Quarter and Period - The values are not matching with the totals....
FY FY Qrt BCost ACost
2011 2011 Q1 80 100
2011 Q2 100 90
2011 Q3 110 120
2011 Q4 90 130
Total 380 440
Fiscal Year, Fiscal Quarter Budget Cost and Actual Cost are not returning correct results – When selecting cost's by fiscal year, or filtering on a specific fiscal year, the amount returned does not equal the fiscal year total;
when I am drilling down to Quarter and Period Level the BCost & ACosts are bumping the Numbers as above and not matching with totals
Any suggestions?

Check out the query in both the times.Execute against database and try to sum the data for quarter/period and compare it with Year data.
Just try to differentiate is it a report total that is getting wrong or the data in the database table itself is getting wrong stored.
Mark as helpful if it helps.
Regards,
Veeresh Rayan

Fund center reports Assigned values are not matching with ledger balances.

Thanks for your Support. We have activated funds management in May-2009. And deactivated one or two times. Now the status is active.
Now we are taking reports the assigned values are not matching with gl ledger balances.
1. We need to update records for April- May.
2. Records in between deactivated and activate time.
Please suggest updating fund centers and commitments.
Regards

hi ELI
i have checked the follwoing secnarios
1. funds management deactivated.
2. one document posted with amount10000
3. funds management activated.
4. we have executed FMN0
here no document is selected after execution.
Please suggest what are the activities we need to do if i am wrong...
Regards

Totals for CKF are not matching

Hi All,
We recently upgraded to BI7 and we created Aggregates in the system. We have few calculated key figures (CFK) in the system. When we execute the queries they are not hitting the aggregates in the system because of the property, calculation before aggregation.
We changed that property calculation before aggregation to calculation after aggregation then the queries are hitting the aggregates. So we moved the aggregates to BQ and BP. There the values for the totals in the report are not matching. For ex: we have value 10 for a CKF in five rows then the total in the result row should be 50 but that is not the case now, it is showing as 45 or 55 some value. The totals are not matching in all the reports where this CKF is involved.
But when we keep the calculation before aggregation property as it is, then the total values for this CKF are matching in the report. But now the problem is that the queries do not hit the aggregates.
So instead of going for a CKF we tried with creating a formula in the query with the same calculation as it is in the CKF, but for that formula also the total values are not matching. When we check and compared the formula calculation with other CKFu2019s in the system, we found out that those CKFs which involved the calculations such as multiplication and division the totals are not matching but if the CKF is containing addition and subtraction then the Totals are matching. This is the same case in across all the systems except in Production.
We have testing system (BT), which is a copy of production; the totals are matching for this CKF in one report. But if we include the same CKF in some other report then the totals for this CKF are not matching in that report.
We are unable to figure out why the same CKF with same properties and calculations is not behaving in the same way across all the systems. If anybody comes across such issue please let us know how to proceed further.
Thanks for your patience.
Hope for your response...

Hi himanshu,
If you are using Addition, subtraction with Multiplication & Division, just maintain all in the Sequence how you required using brackets.
If you are using formula in Row & Column also try to use formula Collision.
http://help.sap.com/saphelp_nw04/helpdata/EN/d2/02223c5f00612be10000000a11402f/content.htm
Regards,
Rajdeep.

FI-PCA balances are not matching

Dear Experts,
I have an issue where FI and Profit center account balances are not matching for period 1 for 1company code.
I have tried the T.codes first F.5D then 1KEK and i tried with T.Code KE5T where i found the differences for 3 accounts.
Hence requesting you all to help me out to close this issue.
We are not using the New GL and we are with Classic GL only.
Thanks in advance for the help,
Regards,
KK

Dear KK,
it is hard to say what's wrong. According to the transactions mentioned, I assume that you have differences on vendor/customer reconcilation accounts. You have to check with report groups 8A98 and 8A99 if the value transfered to PCA with trx. 1KEK is equal to the one shown in the report. In case the value is equal, the root cause is in the FI area (most likely the wrong clearing date is set in the open items). In case the value between 1KEK and the report per account is not equal, you should check if you have the customer exit EXIT_SAPLPC61_001 (enhancement PCA00001) is implemented and active which prevents the update of postings in PCA.
In case this does not help, you have to open a customer message with the SAP Support to investigate the issue in more detail.
Best regards,
Daniela

All activity prices are manually entered (Message no. KP211 )

Dear All,
I have maintained Activity Rates through KP26. On Activity Master I have set Act. price indicator = 5.
Now when i am executing KSII it is giving me error message as :
All activity prices are manually entered
Message no. KP211
Diagnosis
All activity prices in controlling area FLGP, fiscal year 2011, and version 0 were determined and set as manually entered prices.
In actual price calculation, all plan activity prices, meaning those calculated automatically (activity price indicator 1 and 2) and those set manually (activity price indicator 3), are treated as if they have been set manually.
System Response
The SAP System cannot calculate activity prices automatically.
Processing is cancelled.
Procedure
Check your activity type planning. To calculate the activity price automatically, you must set the activity price indicator accordingly.
Proceed
Please let me know if I need to done any additional settings.
Br, Vivek Srivastava

Hi Vivek,
"The error message KP211 is display by the system due
to the SAP System cannot calculate activity prices automatically.
(can you review the settings in the system).
The procedure that you have to follow is to review transaction code
KP26 and your activity types.
From viewpoint of actual price iteration all plan prices are political
in the sense that 'prices does not change during actual price
iteration'. If all activity types have indicator 1 then everything
will be evaluated with plan price in actual. So actual price iteration
has nothing to compute because no price will be changed. You have to
set price indicator to 5 or 6 in actual price indicator for at least
one activity type in order to calculate the actual activity price.
When you change some activity type master data in transaction KL02,
these changes take effect in all relevant tables, BUT please notice
that the values of TARKZ, TARKZ_I etc. are only DEFAULT values for
activity planning and therefore ONLY READ ONCE when the relevant
planning set is created. Subsequent changes to the master data (default
value) take not effect in the planning sets. You have to change the
values in every single planning set manually."
You indicates that for the activity types you have set in the master data
actual price indicator to 5 (Actual price, automatically based on
on activity). But this is only a default value and can be overwritten
for example during planning.
Please see table COKL for cost center / activity type if have an empty field for
the actual price indicator. Thus the system only finds the plan price
indicators during price calculation and message KP 211 is justified if
you consider the following part of the long text:
In actual price calculation, all plan activity prices, meaning those
calculated automatically (activity price indicator 1 and 2) and
those set manually (activity price indicator 3), are treated as if they
have been set manually.
In order to run KSII as expected by you, you have to execute trans.
KP26 for the cost center and activity type using layout 1-204
(Activity Types: Indicators).
Here you can set the actual price indicator to 5.
Afterwards there should be no further problem with KSII.
I hope helps,
Regards,
MLM

Open Item and Line Items are not matching

Hi Gurus,
I ran the EFT for vendor #1600109 for payment on 10/18/07. If I run the vendor open items report (ZFI019) for today, it shows the balance net of the EFT that is $203,466 ( $263869 - EFT Value is $60,403).
When I ran the vendor line items display (FBL1N), it shows all the invoices including the invoices paid on the Oct 18 EFT $263,869 which is (2034,66+60,403).
User wants the open item report should tally the line item display.
I will assign good points.
Thanks for your help
Prashanth

Hi Gurus,
EFT is working fine. But the Vendor Open item Report (Custom Report) and Vendor line item report (FBL1N) is different.
We are looking a balance for a vendor as on 15th where the balances are not matching between the reports but if i run FBL1N on 18th the balances are matching.
Clearning date is 18th
Posting Date is 15th.
Thanks
Prashanth

ETD and Base line are not matching

Hi All,
My requirement is in production server, for some invoices the Expected time departure and base line date are not matching,
What will be the reason behind this? Can you please advice how to approach to this problem.?
Thanks in advance
jaya.G

Hi,
could you please eloborate the issue?
Thanks,
Srinu

FD10N and FBL5N Reports are not matching

Hi,
When i execute FD10N FBL5N reports for customer balance, Both are showing different balances, why they are not matching with each other?
My FBL5N open item blance is not matching with FD10N.what could be the reason?
Is there any other report to show customer opening balances other than FD10N?
thaanks

Dear Dogdays
This is selection parameters problems- means please check once again what you selected check boxes and also check for Dates what you given
To check both the above cases, FD10N for the year you see the difference. Double click on the balance value for the period where you have seen the difference. The double click will call FBL5N for the period and customer. If the total of the line item report matches the balance in FD10N, then the issue is selection criteria
Regards
shankar

Prices are not coming in invoice

Dear Friends,
                 When i prepare a sales order than prices are coming, but during invoice preparation prices are not coming for particulary 2 materials only.Please help.
Regard.s,
Abhijeet

Dear Friends,
                Thanks for your reply. In copy control from delievery to billing,settings are as follows,
         Pricing type:- G
         Coping requirement:-004
         Data VBRK/VBRP:-007
Users enter prices manually when they prepare sales order.Condition category is empty in condition type.
Looking forward for your reply.
Regard,s
Abhijeet

In 27q form Amount deducted and amount payable are not matching

Dear All
Here we made a z programm for form 24 qa as zf24q.But what is happening means in the excell the Amount Tax deducted and Tax deposited is showing correctly but in display these two amounts are not matching.so kindly give any suggestion for me
Regards
lakshman

not answered yet.

How can it that half of my songs are matched in iTunes Match where the other songs from the same CD (ripped by Itunes) are not matched but uploaded?

I started with ITunes Match a few days ago (I have the latest versions of all OS's etc)
- The whole process took more then two days to complete for the first time.
- Half of my songs are matched in iTunes Match where the other songs most of the time from the same CD (most ripped by ITunes) are not matched but uploaded(?)
- Complete CD's are not recognized, they are however available in the ITunes store (songs in my library not available in ITunes are an exception).
- The match part overall is less then 50%, which is a complete disappointment.....
- When I activate ITunes Match on my IPod, IPhone and IPad the art-work does not load or only partly.
- Loading songs on iOS is extremely slow... and that is definitely not due to my internal network.
- ICloud (ITunes Match) on the apple TV stops working after every 15 seconds because it losses connection to the ITunes server....
I am a real Apple fan for the last decade but what a disappointment is this......before I started with ITunes Match everything worked seamlessly.

The number of Songs that 'matched' is simply a function of the current iTunes Match service process. It is not unusual to have multiple Songs in an otherwise perfectly matched album be uploaded - often it is very possible to find the album in the iTunes Store.
The Artwork does tend to reappear for many over a few days / weeks - however, if your library backup has all Artwork present it would be wise to save the Album Art separately and reapply to Albums not showing art work in the library grid view.
Many of the other performance issues you mention are not typical - though during the past working week or so the Apple Infrastructure has been very heavily loaded with multiples countries having service go-live symultaneously.

How can i fix a clip when the video and audio are not matching up?

How can i fix a clip when the video and audio are not matching up? I imported the video from a junkdrive in a .VOB format and concerted to a .mov the videos were filmed on a miniDVD recorder.

I would try detaching the audio and the dragging the audio to the left or right until it lines up.

Activity prices are not matching compare to previous year

Similar Messages

Maybe you are looking for