Activity Report Not Working

Hello - I apologize if this information is already posted somewhere but I was not able to easily find a solution my problem which is this:
I would like to gather statistics on how many times a number of iViews or pages were requested / viewed. I have enabled data collection, and modified the "monitor hits" property to yes on the iViews I'm interested in, as well as added them to the selected content in my Page/iVew activity iView. Even though I have these things set up I do not see the page views showing up on this custom activity report iView I've created. I get the message: No content available for the specified period.
However, the standard Activity Reports page under Content Administration shows the info I want just fine.. I'm not sure why it works in the standard one but not mine - does anyone have an idea of a configuration step I may be missing?
Thanks

Hello Andrew,
Please check that the iViews/Pages inserted into the content list
table are those who are accessible to the end-user. This means that you
should add to this table the objects from the role (since they have
a different ID, therefore they are different object).
Regards,
Victoria Gur
Installed Base Development Engineer
NetWeaver Portal Platform
SAP Labs Israel

Similar Messages

ISE Guest Activity Report not working (1.2.0.899)

Recently I upgraded an ISE to 1.2.0.899. I found the Guest Activity Report is not working. Before the upgrade it was working properly (with the limitation of 5000 records by report). Nothing in the ASA was modified, but nothing is reported in the ISE; also I use the tcpdump integrated in the ISE to validate the syslog messages are arriving from the ASA to the ISE. I already enable the Passed Authentication logging category.
Do I need to modify something else,to have the report?

Hi
Please make sure these steps has configured correctly:
Step 1 Create an alarm, as described in Creating, Editing, and Deleting Alarm Schedules.
Step 2 Specify a rule for Passed Authentication, Failed Authentications, or Authentication Inactivity for all users of type guest, as described in Creating and Assigning an Alarm Rule.
Step 3 Calculate guest user activity by Monitoring Live Authentications.

CDR report not working

Hi,
We have LYNC 2013 and Monitoring is enabled. the CDR report is not working. even User Activity summary for telconferencing and for audio, reports not working.
Kindly suggest troubleshooting steps.
Can we have any SQL query to fetch the report from database?
Thanks
jitender

Hi Raju,
From Monitoring server , CDR report is not working. Even "User Activity Report" not working and giving below error for "Telephony Conference" and as well for "A/V Conference"
" No results match the report filters. Change the filter values and submit the query again."
Thanks
jitender

Hierarchical Tree: When-Tree-Node-Activated is not working

I'm working Forms 10G rel.2.1 and also using application server 10G 2.
my problem is in Hierarchical Tree [When-Tree-Node-Activated] is not working in Enter this is working in Enter+Tab
I want to this trigger is working in only Enter.
I'm waiting quick response

node_value is only item which have transfer the form or report name
Trigger Name : WHEN-TREE-NODE-ACTIVATED
Declare
     htree                Item ;
Begin
     --clear_values;
--           htree := Find_Item('tree.htree');
-- Find the value of the node clicked on.
:node_value := ftree.Get_Tree_Node_Property(htree, :SYSTEM.trigger_NODE, Ftree.NODE_VALUE);
----Above node value transfer the procedure and call the form with node_value(Form Name)
     Execute_CMD_PROC;
Exception
     When Others Then Null;
End ;
when i enter then no value but when i enter+tab then show the form

Pick activity is not working properly while creating two or more file adapt

Hi,
pick activity is not working properly while creating two or more file adapter for bpel process.
bpel process compiled and deployed succesfully but while observing the wsdl file of deployed process you can find only one file adapter. so it polls only from that location.
can anybody help on over this? or it's limitation of jdev to use only one file adapter at time while using Pick.
Thanks
sagar

Does anybody tried this?
Thanks
sagar

Drill down report not working in 1og report

hi all,
Drill down report not working in 1og.
in 6i it working good but 10g not working .
plz help any one.
thanks

Hello,
For detailled instructions about hyperlinks :
Oracle® Reports Building Reports
10g Release 2 (10.1.2)
B13895-01
3.6.10.1.8 Creating a hyperlink using the Property Inspector
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b13895/orbr_howto.htm#i1062802
Regards

IPS event monitor and reports not working

Dear after upgrading my IPS from E3 to E4  the event monitor and reports not working, can you please advice my to solve this issues

Hi All,
Filter settings below:
The filter works partially as I don't get alerts on the IPS itself.
Firewall LOG:
4          Feb 14 2014          15:33:22                              39715                    514          IPS requested to drop UDP packet from SOURCE_VLAN_NUMBER:/39715 to DESTINATION_VLAN_NUMBER:/514
IPS LOG (when enabled):
evIdsAlert: eventId=1352793300955167909 vendor=Cisco severity=low
originator:
    hostId: SSM02
    appName: sensorApp
    appInstanceId: 1192
time: Feb 14, 2014 15:33:22 UTC offset=0 timeZone=GMT00:00
signature:   description=IP Fragment Too Small id=1206 version=S212 type=anomaly created=20030801
    subsigId: 0
    sigDetails: Too many small IP fragments in datagram
interfaceGroup: vs0
vlan: 0
participants:
    attacker:
      addr: 172.x.x.x locality=OUT
      port: 39715
    target:
      addr: x.x.x.x locality=OUT
      port: 514
      os:   idSource=unknown type=unknown relevance=relevant
alertDetails: InterfaceAttributes: context="single_vf" physical="Unknown" backplane="GigabitEthernet0/1" ;
riskRatingValue: 50 targetValueRating=medium attackRelevanceRating=relevant
threatRatingValue: 50
interface: GigabitEthernet0/1 context=single_vf physical=Unknown backplane=GigabitEthernet0/1
protocol: udp
Our next step is to make a service policy exception on the firewall itself. We are also considering reloading the IPS device or at least the analysis engine.
Thanks for all your help so far. Any more suggestions are most welcome. I'll keep you up to date.
Regards
Mariusz

Mysites Activity feed not working

Hi,
I have restored Mysite Content database.After restoring it, Profile pictures coming correctly but activity feed and trending tags not working(coming blank).
After restore db i did following:
IIS reset
Server reboot
Mysite setup settings(activity feed enabled)
Alernate access mapping.
Still activity feed not working.Please suggest.

Hello
Have you checked the timer job ?
http://technet.microsoft.com/en-us/library/hh344225(v=office.15).aspx
Best regards, Christopher.
Blog |
Mail
Please remember to click "Mark As Answer" if a post solves your problem or
"Vote As Helpful" if it was useful.
Why mark as answer?

HT2188 iPad 1 requested activation after being low on power. Activation does not work.

Hi
My iPad 1 requested activation after being low on power. Activation does not work so I have tried to restore it from iTunes. this progresses but after rebooting, it gets to the activation process for a few minutes and re-boots again - in a loop now. on ios6, not 7. help please?
I also looked at trying to do a manual install of firmware via iTunes but I do not know the version of firmware or how to find it out - so really stuck!
Thanks

I pulled my unit out of the dock - powered up and the display goes blank (if you look carefully you can see the bios boot screen, then black, then you can see the backlight turn off.
I plugged in the USB monitor and boom - I could log in.
Once Logged in I could see that windows still thinks it has some of the monitors from the dock, and the internal display is set to disable.
So the issue is the detection / setup of monitors in/out of the dock.
I've done about all I can do for dubugging, I hope lenovo can pick up from here. if not I'll have to call lenovo support.

After i install Visual-Studio 2013 crystal-report not working

hi
after i install Visual-Studio 2013 crystal-report not working on my Visual-Studio 2010 projects
when i try to open crystal-report i see this:

Hi E_gold,
Crystal Reports forum may be a better place for you.
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Interactive Reports not working with APEX listener

Hi,
I have posted this question APEX listener forum couple of weeks ago but very few responses.
If any one from here can help then it would be great.
Interactive Reports not working with APEX listener
Best Regards,
Baig

Sorry for late response.
It was a firewall issue

Active Sync not working

I am having an issue with active sync not working. I am looking for updates from my resource every 5 minutes for changes. My enviornment is such:
IdM Version 5
App server: Weblogic 8.1.6
IdM is looking at AD (2003) for changes.
My log files look like such:
2007-02-06T13:20:07.794-0500: Started, paused until Tue Feb 06 13:25:00 EST 2007
2007-02-06T13:25:00.049-0500: Pause completed
2007-02-06T13:25:00.095-0500: Polling
2007-02-06T13:25:00.111-0500: Looking for updates with filter: (objectCategory=person)(uSNChanged>=71766297)
2007-02-06T13:25:01.064-0500: Looking for deletes with filter: (uSNChanged>=33117487)
2007-02-06T13:25:07.767-0500: Poll complete.
2007-02-06T13:25:07.767-0500: SARunner: loop 263
2007-02-06T13:25:07.814-0500: Started, paused until Tue Feb 06 13:30:00 EST 2007
2007-02-06T13:30:00.053-0500: Pause completed
2007-02-06T13:30:00.068-0500: Polling
2007-02-06T13:30:00.084-0500: Looking for updates with filter: (objectCategory=person)(uSNChanged>=71766297)
2007-02-06T13:30:01.240-0500: Looking for deletes with filter: (uSNChanged>=33117487)
2007-02-06T13:30:08.021-0500: Poll complete.
2007-02-06T13:30:08.021-0500: SARunner: loop 264
2007-02-06T13:30:08.084-0500: Started, paused until Tue Feb 06 13:35:00 EST 2007
2007-02-06T13:35:00.057-0500: Pause completed
2007-02-06T13:35:00.088-0500: Polling
2007-02-06T13:35:00.104-0500: Looking for updates with filter: (objectCategory=person)(uSNChanged>=71766297)
2007-02-06T13:35:01.229-0500: Looking for deletes with filter: (uSNChanged>=33117487)
2007-02-06T13:35:08.166-0500: Poll complete.
2007-02-06T13:35:08.166-0500: SARunner: loop 265
2007-02-06T13:35:08.197-0500: Started, paused until Tue Feb 06 13:40:00 EST 2007
2007-02-06T13:40:00.030-0500: Pause completed
2007-02-06T13:40:00.030-0500: Polling
2007-02-06T13:40:00.045-0500: Looking for updates with filter: (objectCategory=person)(uSNChanged>=71766297)
2007-02-06T13:40:01.014-0500: Looking for deletes with filter: (uSNChanged>=33117487)
2007-02-06T13:40:07.795-0500: Poll complete.
When I run these search filters I get results from my AD. When IdM runs the search they are coming back blank. Any ideas?
Thanks,
Chris

If you have changed environments... or for some other reason, your USN number on the AD resource could be lower than the number passed in the query.
Manually edit a user in AD, and then check the USN number of the object. See if it is lower then the query is passing. If so, you can manually edit the IAPI_ResourceName configuration object and alter the USN number passed in the query.

Discoverer report not working on R12 !

We have just migrated to R12 from 11i and some of the discoverer query is not working, but the same is working fine when we ran thru SQL Developer or TOAD.
Is there any context (mo_global.set_policy_context) needs to be set in Discoverer report to get the data?
Thanks

Thanks Srini,
There is no any specific error message, the strange thing is if I run the Discoverer report is not returning any data, but if I set the mo_global.set_policy_context ('S',111) in SQL Developer or TOAD and then run the discoverer report it return data...
Any pointers?

Crystal Report not works in JAR File

I'm using Eclipse All in one, which includes Crystal Reports.. I Connected my Java program with Crystal Reports and its working properly. Now my problem is that the Report is not working in JAR files.. It throws some exception as
"com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: com.businessobjects
com.businessobjects.reports.sdk.JRCCommunicationAdapter---- Error code:-2147215357 Error code name:internal"
Whats the Error.. I don't know. I think that i may missed some CLASSPATH Files. The included CLASSPATH Files are:
ReportViewer.jar
jrcerom.jar
Concurrent.jar
CrystalCharting.jar
CrystalCommon.jar
CrystalContentModels.jar
CrystalExporters.jar
CrystalExportingBase.jar
CrystalFormulas.jar
CrystalQueryEngine.jar
CrystalReportEngine.jar
CrystalReportingCommon.jar
icu4j.jar
keycodeDecoder.jar
log4j.jar
MetafileRenderer.jar
rasapp.jar
rascore.jar
rpoifs.jar
Serialization.jar
URIUtil.jar
xercesImpl.jar
xml-apis.jar
and the mysql-connector jar file
Anybody help me please...

Unable to load database connector
'com.crystaldecisions.reports.queryengine..driverImpl.
DriverLoader
now you have any idea.. pleaseIs that a typo where you have two periods below?
queryengine..driverImplOther than that I don't think anybody here can help you with that. If your classpath includes all necessary JAR files and you are able to access all your resources from within your application JAR file, then I imagine there is a problem with the third-party crystal decisions JAR file or how you are attempting to use it.
My advice to you is to try and contact support with the vendor or provider of this API or possibly try posting on a support forum on their website to see if somebody can help you there.

Dynamic Selection on report not working

Dear all,
I have several reports on which the dynamic selection is not working. For instance, the report CN43N. The report is outputting all data in a year i.e it is disregarding the condition I specified in the dynamic selection fields.
Is there some configuration to make to this report so that the dynamic selection works?
Thanks for ur help.
Nas

Also Nelmaz,
I have just checked OSS notes and found below note helpful to you:
Note 1059465 - CN43N: Dynamic selections for scheduling data of WBS elemnts
Symptom
You cannot use transaction CN43N to create dynamic selections for scheduling data of WBS elements (table PRTE). You can use transaction CNS43 to do so.
Hope this helps.
Please assign points as way to say thanks

Activity Report Not Working

Similar Messages

Maybe you are looking for