Activity result not appearing

Hi,
Activity result is not reflecting even after i created entries in industry specific area in SPRO. CRM> Tramsactions> Activities-->industry specific entries
Can any one help me with a detailed procedure...
Regards,
AR

Hi AR
Go to SPRO --> CRM
Transactions --> Define activity reason --> Define code group profile
For ex. If you are using A2, select A2 and you can see all the code groups assinged to it
Each code group has different codes with in it.
In definition of code group profile you can define all the code groups that are applicable for tht profile. For ex. you can select ACT000001 and see all the code groups that are applicable
Now go to define subect profile. For example ACT000002
You can assign catalog A2 and code group profile ACT000001 to this. You will be able to see all the code groups too.
Now go to transaction customizing for activities and assign status and subject profile for each transaction type
Here you mention for your trasaction type and for different status the subject profile that is applicable. Ex 0001, E001 with ACT000002.
You now will be able to see all the different reasons which will appear as combination of code groups and codes
Rgs

Similar Messages

Activity Guide Not Appearing on BPM Workspce

Hi Guys,
I have created a BPM process and configured Activity Guide. However, activity guide is not appearing on the workspace. I am getting some error in log while opening the Activity Guide Page.
Below is the error received. Any help on this issue.
Runtime error in AG Query Service. Failure to retrieve AG resource bundle from metadata service in constructMilestoneDisplayInfo.
ORABPEL-38006
Runtime error in AG Query Service.
Runtime error in AG Query Service. Failure to retrieve AG resource bundle from metadata service in constructMilestoneDisplayInfo.
at oracle.bpm.services.activityguide.impl.BpmAGQueryService.constructMilestoneDisplayInfo(BpmAGQueryService.java:1055)
at oracle.bpm.services.activityguide.impl.BpmAGQueryService.constructMilestoneDisplayInfoList(BpmAGQueryService.java:960)
at oracle.bpm.services.activityguide.impl.BpmAGQueryService.constructAGDisplayInfo(BpmAGQueryService.java:811)
at oracle.bpm.services.activityguide.impl.BpmAGQueryService.queryAGDisplayInfos(BpmAGQueryService.java:290)
at oracle.bpm.services.activityguide.impl.BpmAGQueryService.queryAGDisplayInfos(BpmAGQueryService.java:164)
at oracle.bpm.services.activityguide.impl.BaseAGQueryService.queryAGDisplayInfos(BaseAGQueryService.java:74)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Exception
Supplemental Detail java.util.MissingResourceException: Can't find bundle for base name ActivityGuide, locale en_US
at java.util.ResourceBundle.throwMissingResourceException(ResourceBundle.java:1427)
at java.util.ResourceBundle.getBundleImpl(ResourceBundle.java:1250)
at java.util.ResourceBundle.getBundle(ResourceBundle.java:952)
at oracle.bpm.services.activityguide.impl.BpmAGMetadataCache.getResourceBundleLocal(BpmAGMetadataCache.java:267)
at oracle.bpm.services.activityguide.impl.BpmAGMetadataCache.getResourceBundle(BpmAGMetadataCache.java:222)
at oracle.bpm.services.activityguide.impl.BpmAGMetadataService.getResourceBundle(BpmAGMetadataService.java:79)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at oracle.bpel.services.workflow.common.WorkflowServiceCacheEventAdvice.invoke(WorkflowServiceCacheEventAdvice.java:91)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy516.getResourceBundle(Unknown Source)

Hi Durga,
Your problem was probably caused by something different than what I ran into, but by making sure there was some text and/or XPath expression in the Title fields of both the human task and the Interactive activity my problem went away and I was able to use the Activity Guide.
To get to the title field for the interactive activity, double click the activity in the process -> click the "Implementation" tab -> in the "Title" field, enter some text and/or an XPath expression.
Just make sure both the human task and the interactive activity title fields are not left blank.

Activated fonts not appearing in Illustrator?

I'm running Illustrator CS on a Dual PPC G5 running OS 10.3.9. I have an OpenType font active (using Linotype FontExplorer to manage fonts) and can use the font in all programs except the Adobe ones (Illustrator and Photoshop). Why would the font not appear there? I need it for a logo that I have to manipulate into a vector graphic, but I can't do anything if it won't appear in the type menu. Any ideas as to what's going on and how I can fix this?

Christine,
Did you by any chance create the fonts yourself? OpenType fonts shouldn't cause any more trouble than Type 1 if they are correctly made and named.
If their names show up incorrectly or if they don't show up at all, it's probably because someone did something wrong in Font Info when he was making the font. If you make use of the Build Names thingummy in FontLab Studio it can save you a lot of this kind of trouble. I have done quite a bit of this kind of work - adding Icelandic characters to fonts and that sort of thing - and find that it's absolutely essential to do things right if you want to avoid problems in FontExplorer.
It can sometimes happen too that fonts are made specifically for Windows, in which case they may need to be edited and re-saved for Mac before you can use them so that they work perfectly. You can often get a Windows font to work well on a Mac but you should keep your eyes open for glitches all the same.
And another thing, you may occasionally need to restart Illy when you've made changes to fonts in FontExplorer. This doesn't happen often these days but still crops up occasionally all the same.

Search result not appearing in search view

Hi,
I have successfully indexed a xml file in one collection.When i tried to search for the result set for that particular collection in search view,am getting "no results found" warning.I have tried it in QR server also but i am not
getting that xml file in results set.
Can anyone help,how to get the result set in search view?
Thanks
Kaappz

Hello Kaappz,
The common cause for this problem is that the document is not indexed or we are searching for content that is not in the content composite field.
Can you verify that the document is indexed by searching from the qrserver (port 15100) for and(meta.collection:<collectionname>, <term in doc>) and confirming that the document shows up in your results?
If so, if the document does show up in search results for the collection, I would recommend searching at the qrserver with the parameters: view=<name>sppreview, and view=<name>sppublished parameters, and determine if you see the document.
Let us know your findings.
Thanks!
Rob Vazzana | Sr Support Escalation Engineer | US Customer Service & Support
Customer Service & Support
Microsoft| Services

Results not appearing in email

I am having a problem with the email not displaying or
attaching results. I have checked all parameters in the quiz
preference so that is not the problem. here is what happens:
1. I press send email
2. I get the warning window that the it is attepmting to send
an un ecrypted email. I hit ok
3. I get another warning window that says it wants to open
outlook (my default mail handler) which is casued by my pc running
in protect mode.
4. I allow it and after hearing a few clicks... my new email
window opens with nothing in it but the To: address and the subject
filled with the date.
I have tried disabling protect mode but I get same result.
I am using Vista 32bit, IE7, Outlook 2007, Captivate 3
Can someone please help.

Welcome to our community, gillt40
If there were a single issue that seems to have plagued
Captivate, you have hit it. E-Mail reporting is so far from
reliable it isn't funny. The unfortunate part is that there are no
answers. There is no magick solution for it. No setting you can
tweak or forgot to turn on. It's all hit or miss. And judging from
the posts I see here day after day after day that report the same
thing, it's mostly miss.
The fact of the matter is that the only really reliable
reporting you will find is if you use a Learning Management System
(LMS) as that was how Captivate was designed to work best.
Sorry, but all I can do is tell the truth. Then stand back.
Cheers... Rick

Step results not appearing in report

Hello. New to TestStand. I've creted a String Value Test that compares the UUT Serial number using RunState.Root.Locals.UUT.SerialNumber. However, when the report is generated I see no step results. This is only happening with this sequence and not with any of the tutorials. Can anybody point me in the right direction for this. Thanks.
Solved!
Go to Solution.

Here is the sequence file and the LabView vi I'm using.
Attachments:
Serial Content.seq ‏7 KB
String Value Test.vi ‏14 KB

PHP form help - results not appearing in email

Hi I have set up a simple entry form, and I am submiting it
using PHP to my email address, It works well when you fill the form
in and send it, I receive the email however the email only displays
the questions and not the answers that have been filled in on the
form. Itss driving me crazy as top why this is not working. Can
someone please help?
here is my form code, both form and PHP. Thanx

I haven't checked the form, but I had a similar problem with
my server when they upgraded their systems recently. I would
receive the email, but it was blank.
Th reason was ...
As long as your scripts do not need "register_globals" they
will work.
The default php mail command works. Again - no
"register_globals".
A lot of old and lazy written scripts rely on it. But it is a
major
security risk - even more so on shared servers - and as such
has been
disabled by default in PHP since version 3.0.3.

Quiz results not appearing in email body

Using Captivate 2, I set up a quiz that is supposed to send
its results to e-mail. In the Quiz Manager, on the Reporting tab, I
have the following settings:
Enable resporting for this project (checked)
LMS: email
Report Pass or Fail: report status as defined by report data
Choose report data: report quiz results and slide views
Report score to LMS as: score
Reporting Level: report interactions and the score
Then I publish my project. When I run the .htm, no e-mail is
generated. The only way I can get an email to generate at all, is
if I click on the Pass/Fail Options tab in the Quiz Manager, and
set "If passing grade:" action: send email to: (the email address).
This does generate an e-mail, but the body is blank, with no
results reported within (even though I specifiying that I want the
data in the above settings).

I'm trying to do the same thing... having set up a small
quiz, a pass mark, and asking for an email to show the score only,
nothing is generated running it locally. But after uploading to my
server and running it from there I do in fact get an email. The
data is in an attachment POSTDATA.ATT which Windows doesn't know
how to open. But if you change the extension to csv then XL opens
it fine and reports as requested. The user is identified by the
sender of the email.
HTH

Firefox search engine results not appearing in a new tab

how do i configure FF (3.6.13) to display search engine results on a new tab? It used to do this for me but now doesn't anymore, and I can't find any config settings to change this.

Type '''about:config''' in the URL bar and hit Enter. <br />
''If you see the warning, you can confirm that you want to access that page.''
'''browser.search.openintab''' is the preference, '''true''' is the value.

Added fields not appearing in the DSO transformations.

Hi,
I have added three new info objects into data fields in the DSO then activated and not appearing added fields in the transformations.
Please suggest me,
regards,
Jayapal.

Hi Jayapal,
i dont know whether it would help you...you can give a try on it.
Instead of deleting the Transformation, just delete the mappings if any in the transformation.
Goto DS->Fields Tab-->In the Column Template info Object. Try mapping corresponding IO with the Source IO.
Then it will show a pop up give Copy . Activate the DS.
Goto Info Provider>Select the Transformation> If it is active-->reactivate it by clicking the Pencil Icon with glass and click activate icon.
If its not active, then reactivate it again by clicking the Pencil Icon with glass.
Let me know if it Works... Cheers
Regards,
Syed
Edited by: shameer83in on Nov 20, 2009 12:10 PM

I changed my AppleID/Password and now am locked out of iCloud. iCloud says maximum number of free accounts have been activated. tried Settings, Mail etc but iCloud does not appear. I was going to delete it and start again.

Had to change Apple ID/Password recently now cannot access iCloud. In settings when tapping iC, log in screen appears with old ID and request for (old) password.
In Settings Mail, Contacts etc iCloud does not appear. I was going to delete account.
Trying new ID/Password message appears "maximum no. of free accounts have been activated".
Using old ID/Password message apperas "you can,t sign in because account was disabled for security reasons ......reset password at iforgot.apple.com which i did.
Can anybody help please??

Hi,
I tried to log in to iCloud but a message appears telling me I "can't sign in because my account was disabled for security reasons....reset password at iforgot.apple.com". I don't know why this happened.
I reset both my Apple ID and password.
When I tap Settings iCloud is listed on the left side between General and Mail, Contacts etc.
Tapping iCloud brings up a log in screen for iCloud which shows my old Apple ID and requests the password. If I put the password in I get the message as above.
If I use the new Apple ID/Password I get the message "the maximum number of free accounts have been activated....
In settings there is no option to "Delete Account"
Any suggestions??

How to get a question in the course placed anywhere in the course and does not appear in the quiz result or total number of questions. Pretest would work except it can't go anywhere in the course (at least for me it can't)

How to get a question in the course placed anywhere in the course and does not appear in the quiz result or total number of questions. Pretest would work except it can't go anywhere in the course (at least for me it can't)

Use a normal question, and do not add the score to the total score. That will give you a correct score at the end. But the total number of questions, that system variable will still take into account all questions. You'll need a user variable, and calculate its value by subtracting 1 from the system variable cpQuizInfoTotalQuestionsPerProject. Same for the progress indicator if you want to show it?
Customized Progress Indicator - Captivate blog
If you want to allow Review, you'll have to tweak as well. You didn't specify the version, and all those questions I now mentioned.
And my approach, since you talk about only one question: create a custom question, because you'll have total control then.

Error FF753 Tax code 01 not appear in any G/L account item with FM Active

Hi
We have fund management configured for one of the company code, while creating billing document through VF01/VF02 we are getting the Error FF753 Tax code 01 not appear in any G/L account item.
This error however does not appear when posting directly from FI with the same tax code.
I have tried to change the message control in which case i am getting a dump pointing to PSM-FM.
Please advise.
Regards
Sandeep

Hi:
          If you could please refer to the contents of OSS Note 112609 - How are tax codes transferred to conditions ?
"Symptom
If a billing document is transferred to accounting the system displays error messages. Transferring tax codes from tax conditions into the pricing conditions and discounts does not function as expected.
Other terms
FF805, FF747, FF753, MWSKZ, MWSK1, tax code
Reason and Prerequisites
The tax condition in the SD pricing procedure contains incorrect reference steps, there are several tax conditions in the pricing procedure of which the tax codes overwrite each other or a program error exists.
Solution
In the accounting document for a billing document, the different G/L account line items are provided with a tax code. The tax code of the G/L accounts is transferred from the tax condition(s) of the billing document. How are the tax codes of the tax conditions transferred into the other conditions of a billing document ?
Basically:
The conditions of a billing document are read from top to bottom. As soon as an active tax (inactive = ' ') is read, the system transfers the tax code of this tax into the non-tax conditions as follows:
    1. The reference steps (From-step, To-step) are read (the reference steps are defined in the pricing procedure).
    2. The tax code is transferred into all conditions, for which
    the step number of the condition lies in the pricing procedure between "From-step" and "To-step",
    the condition is not inactive (exactly: the inactive flag is not equal to A (Condition exclusion), M (Inactive due to manual entry), or X (Incorrect)),
    the condition is not statistical (if it is no invoice list condition),
    the condition is no tax condition.
After the transfer of the tax code the system searches for the next active tax. If further taxes are found, their tax code is again transferred according to the above procedure. If the reference steps of different taxes overlap, tax codes that have already been transferred are overwritten. To all non-tax conditions which in the pricing procedure stand after the last tax condition the tax code of the last active tax condition is transferred if they are not statistical.
Special features:
    1. If the "From-step" of a tax condition refers to a subtotal of the pricing procedure, the tax code of the tax is not only transferred into the conditions with step number between From-step and To-step but into all non-tax conditions for which
    the step number of the condition in the pricing procedure is lower than the "To-step" of the tax condition.
    the condition is not statistical (if it is no invoice list condition).
    the condition is not a tax condition.
    2. If the "To-step" of the tax condition is smaller than the "From-step", then the system sets "To-step = From-step".
Notes:
    1. As of Release 4.0 the tax code is no longer transferred in pricing but only when the billing document is released to accounting.
    2. If you use several taxes and tax codes and Customizing is incorrect for the release of billing documents to accounting, among others the system may display error message FF747.
    3. If there are several taxes in the pricing procedure refer to Notes 72173 and 82091 for Releases 3.0D - 3.1G. For Release 3.1H, only note 82091 is relevant.
    4. For conditions which are transferred into accounting (thus not statistical, not inactive conditions) and do not contain a tax code, the system searches for a default tax code which in Accounting Customizing can be set depending on the company code (tax code for non-taxable transactions). This applies to releases up to and including Release 4.5B. For Release 4.6, refer to Note 385127."
Regards

Hi, just upgraded my iphone 4s to ios6. all of my playlists are gone and if i create a new one, i does not appear on my phone. itunes match is activated. can someone help me?

Hi, just upgraded my iphone 4s to ios6. all of my playlists are gone and if i create a new one, i does not appear on my phone. itunes match is activated. can someone help me?

You should be syncing your contacts with an app on your computer or cloud service (iCloud, Gmail, Yahoo, etc), and not relying on a backup. If you haven't been doing this, start now and then restore your old backup. You will then be able to sync the new contacts back into the phone. However, you will lose all messages, etc newer thant the backup.

I updated my Iphone 3gs to 6.1.3 after that I am having this message "Your iPhone could not be activated because the activation server is temporarily unavailable." "The SIM card inserted in this iPhone does not appear to be supported" plz help me! what s

I updated my Iphone 3gs to 6.1.3, after that m having this message:
"Your iPhone could not be activated because the activation server is temporarily unavailable."
"The SIM card inserted in this iPhone does not appear to be supported"
plz help me! what should i do now?

You had a jailbreak and unlock.
When you updated you cooked it.
Your phone is done.
Time for a new one.

Activity result not appearing

Similar Messages

Maybe you are looking for