Activity time
Dear All,
Iam using milestone confirmation CO15, when I use this I would like to get the Planned time from the routing to be updated in AFRU table.
I dont want to use CO11N -operation wise transaction for confirmation.
Is it possible to update the planned time in AFRU table?
Thanks and regards
Satish
Edited by: Satish Kumar on Sep 22, 2011 4:19 PM
Hello Prinka,
The reason could be as follows.. when you display the data in the calendar, you always get it in your own timezone.
So let's say at that time when the user timezone was EST, the activity was created with the following:
Start: 01.04.2007 12:00
End : 01.04.2007 13:00
This would be stored in the scappt table as :
TmstpFrom: 20070401160000
TmstpTo : 20070401170000
Now you change your user timezone from EST to CST:
If you check the calendar, you'd see the data in CST, means:
Start: 01.04.2007 11:00
End : 01.04.2007 12:00
However, if you click the activity, you will still see the data in the activity saved timezone (the one in SCAPPT), and therefore you'd see
Start: 01.04.2007 12:00
End : 01.04.2007 13:00
Would it answers your question.
Thanks
Raja Pamireddy
CRM Marketing Forum Moderator.
Similar Messages
-
Column Activity time of DB2 Thread Activity is sorted improperly
Dear Thomas!
There is a small but annoying problem... The column of "Activity Time" in "Thread Activity" ALV table is not sorted properly.
The field of "ACTTIME" contains time amounts in two different formats if the amount includes days or doesn't.
The note 1280173 doesn't correct the problem. Even after this note the column sorted in the descending mode looks in such a way:
12:13:14.156789
099d 12:13:14.5
07:24:34.157890
030d 12:13:14.5
020d 12:13:14.5
01:24:34.157890...
The desired format (even with "d" for days):
d099 12:13:14.5
d030 12:13:14.5
d010 12:13:14.5
12:13:14.156789
07:24:34.157890
01:24:34.157890...
It is an ALV table and its numerical fields are displayed as right-justified and character fields as left-justified despite leading spaces. A correction is required, either in the sorting routine or in these values presentation.
Best regards,
VladMy advice: Don't hold your breath.
SAP Note 1280173 is for BC-DB-DB2, aka DB2 for z/OS. Since this platform has at best 1% of the SAP market share, I would not expect such a small non-critical annoyance to be fixed quickly. That is just based on my limited experience with SAP on Z. SAP probably has bigger issues to solve on platforms with far more market share.
We're still waiting for the recommended runstats and reorgs to work with a schema other than the ABAP stack's SAPR3. At the moment, DSNACCOR is able to feed SAP all recommended runstats and reorgs, but SAP can only handle the ones with SAPR3. The others (including SAPJAVA) are ignored. We were first promised that this would be fixed in SAP_BASIS 7.00 SP17 and had to wait 6 months for this SP to be released after we identified the deficiency. It was NOT fixed in SP17. Now we are told the runstats piece MIGHT be corrected in SP18 (due out February 2009) and the reorgs MIGHT be corrected in SP19. We will have been waiting well over a year for this basic functionality that works with other supported SAP DB platforms.
Best of luck!
Brian -
Cost of order and total standard activity times
Hi,
please let me know from which table i can get the following
1.Planned total cost of a production order &
2.Total standard activity times of production order.
Regards
Rameshfor order cost use function module /CWM/CKCOPROD_ORD_TARGET_COST
test the function module with your abaper if it returns the vadesired values, through table it will be vary complecated.
for order related activity times please check AFVV, AFVC and AFRU tables .
hope this will help
reward if useful
Thank you
Anand -
Last active time values is NA in prime infrastructure
hi all my bro!!
first, i'm so sorry. i can't speak english very well. but i need some feedback and i'll do my best for you.
please understand, even a little bit clumsy expression. ^^
now, let discussing with my problem.!
i have my prime infrastructure server and the test is progressing
Currently, my test was finished the nelflow.
this is the point that the problem is occured
most of the equipments is working property but there is one equipment that not opearate property
if my configuration is property, i can see the some value in Last Active Time(ex:17-Mar-2014 10:49:36 PM UTC)
but now i can see the N/A values.
what do i do need something? and my configuration is wrong?
i dont know why this message is dispplayed!
please help me and attached my PI scrinDear oratest,
Please see the following link;
http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/dynviews_2113.htm#REFRN30246
+"+
+LAST_ACTIVE_TIME+
+DATE+
+Time at which the query plan was last active+
+"+
That is the time that the "query plan" active period. I think this could be as what you have said.
Regards.
Ogan
Edited by: Ogan Ozdogan on 30.Ağu.2010 22:21 -
DSO Activation Time - "TIME_OUT"
Hello,
i've added a new InfoObject to an existing DSO.
Then, i saved the DSO and wanted to activate it.
Now to the problem:
The activation time is so long, that the process terminate.
So that we get the runtime error "TIME_OUT".
I ask for your help.
Regards
MarcoHi Marco,
As you are trying to activate the DSO in front end and it is ending with time out error(This may be your DSO taking long time to activate).
activate using program RSDG_ODSO_ACTIVATE
goto SE38-->give the program name and execute -->give the DSO name -->before you click on execute, in menu bar under execute click on execute in background.
in the next screen give the local printer name and enter.
In the next screen make the job condition as immediate and remove the periodic option and enter.
Now you can see the job in SM37, monitor this job until it's get finished.
Regards,
Venkatesh -
I am using a MacBook Pro version 10.7.5.
Ive just noticed my entire iPhoto library is missing except for tonights last sync.
I have never activated Time Machine. I am worried if i activate it now, i would have no chance of retrieving my iPhoto library.
Can i restore the iPhoto library from the laptops memory? Or have i clicked the wrong thing while syncing, with no chance of seeing my life again?I was distracted at the time and have forgotten but I thought it was something like "are you sure you would like to replace all photos on this divise for the ones in your iPhoto library" I was confident as both the comp and my phone have been together for years now.
Im questioning wether the iPhoto program had its own problem before tonights sync. Syncing photos is something i would do regularly without problems, but I've had about a six month break.
Luckily i have made some folders and copied photos out of the iPhoto program. iPhoto was my default photo program and had so many photos from my travelling.
Also I remembered Facebook syncs photos privately, I trying to go way back in time to see if there are any i can save there.
I respect your honesty, if you believe there is no way i can get the program back to normal just say so. -
UCCX 9.0 CAD Logout non-activity time
I'm trying to find a way to automatically log agents out of CAD after they've been sitting idle for a certain period of time. I know this exists from seeing it at previous jobs where I was an agent. I've searched for any articles or forum posts I could find that give information on this and I've seen people mention a setting for "Logout non-activity time", but I'm not able to find this setting anywhere. I've checked in CCX Administration and Serviceability, Desktop Administrator and Desktop Workflow Administrator.
Can someone point me in the right direction so I can get this set up? Thanks all.Hi,
the "Logout non-activity time" is a parameter in UCCE (the enterprise grade contact center solution from Cisco). I am not aware of this setting built in in UCCX.
What you can do, however, is to set up a Workflow of time "Time of Day" and you can map an Agent State Action with Agent State Control set to Logout. I know this is not what you want but this may be close to it: you can for instance create a rule that logs out all agents at 23:00. You can even send a notification message before the actual logout.
Note this is for UCCX premium only.
Read the details in the "Cisco Desktop Administrator User Guide, Release 9.0", p.92.
G. -
Vision Builder 2010 Active time not working when calling Vision inspection from testand 2010
I have an issue where I am timing a flashing light using the active time variable, when I run the inspection from the inspection view everything works, however when I run it from the configuration view or by calling it through teststand 2010 with the Vision Vi's the Active Time never changes from 0.00000.
I do not need precides timings so I am NOT worried about the +/- 20ms from the windows system clock.Hi Ryan,
Can you read any of the other variables using the Get Inspection statistics VI? Is it only the Active Timer that doesn't change?
Cole R.
National Instruments
Applications Engineer -
Active Time Variable Vision Builder AI
Hi,
I want to confirm a question about the system variables. I am wanting to program an algorithm that will count how many faults occur within a set time and if the amount of faults reaches a specified number within this time limit send an alarm. Is the Active Time in system variables the amount of time the inspection state has been running or the whole time since the run inspection was triggered. ThanksHi T.P Titherington,
The Active Time shows the time the inspection states have been running. Thus, this time will 'pause' when you stop the Inspection and resume when starting again (minus the idle time). To reset this you can use Inspection>>Reset Inspection Statistics.
DylanC -
BDCP Change Pointer Activation Time
When a Change Pointer is written (BDCP) it appears that the Activation Time (ACTTIME) and the Creation Time (CRETIME) are the same. Is there any way to change the Activation Time when the Change Pointer is written?
We have the need to fire Idocs MATMAS, BOMMAT, DOCMAS, and CLFMAS to an external system. The objects in these IDocs are tied to ECM (Engineering Change Management). The ECMs have an effective date. The requirement is to fire the Idoc ONLY when the ECM effective date arrives. For example, a BOM change is made today but is not effective until next Friday - in this case the idoc should not fire until next Friday.
I have built a solution based on copying the respective Idoc FMs and modifying the change pointer process to look at the ECM and determine if the Effective date is <= today - if so, proceed - if not, skip. However it would seem that adjusting the Activation Time of the change pointer would be cleaner and not require changing a bunch of FMs.Please,
Consider the question as closed. -
How to reduce smartform activation time
Hi, All
i create a new smartform and just activate without filling any value in form , smartfrom activated within 1 second properly
now again when i activate same smartform it take nearly 20-30 minutes for activation .
Does anyone know how to reduce this activation time of smartformHello,
strange problem.
I think you have contact your basis collegues and maybe is helpful to look this transaction : STATTRACE
Regards
roberto -
How to reduce dso activation time
hi
can any body explain me how to reduce dso activation time.I am having a dso with 5 crore records and it is taking 7 to 8 hrs for activation.Hi,
Try this.
T.code RSCUSTA2 . Here you can change the no.of records and no.of processes to use for activation job with this you can increase your ODS activation process, here the no.of processes can be increased based on no.of processes available in your server, check in SM50 or SM51.
ODS Query Performance
Thanks,
JituK -
Actual activity time in confirmation entry
Hello friends;
I want to assign actual acivity time required for confirmed yield in CO11N. System assigns required activity time, when i click on "actual Data" tab. But that time is for whole order quantity. I always do partial confirmation. So i want that system should always propose me the time, that required for enterd yield quantity.
Waiting for Reply.
Thanks!Hi,
In t code OPK4 on Operation indiv.using initial scrn.
Click on check box Propose in section Quantity and service .
in t code OPK0 in standard profile Default tab
Default Value section mention Immediate proposal in Quantity and Service fields.
regards,
Vishal -
100% Activity time of hard disk in HP 1000-1140tu .
Hi Everyone
HP 1000-1140tu notebook with 500GB (Toshiba MQ01ABD050 ) , 2GB Ram ddr3 and core i3 processor. This machine has 100% Activity time for hard disk and average response time is always above 1200ms. Mostly system get stucks for 2-3 minutes.
I have re-installed windows 7 and windows 8.1 64bit versions and format the hard drive but issue is not fixed.Also i have updated bios to latest version. Does anybody know about this issue?
I have two suppositions about this issue :
1. Hard drive controlller issue
2. Hard drive connectors issueHello @Hp1000TU ,
Welcome to the HP Forums!
I understand you have 100% disk usage on your notebook at all times.
Let's start by optimizing the hardware performance on your notebook by changing the power plan to High Performance.
You can also try running a disk check for corruptions on the drive, and have the computer try to fix them. To do this I suggest booting the notebook into safe mode with command prompt, and then running the following command:
chkdsk /b /v /x C:
Let me know the results of the check disk or if the power plan resolved the issue.
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP. -
RV220W System Time Issue in Combination with WiFi Active Time
Hi
Have system time issues with rv220w!
Setup:
Note that the real time is 17.32 (bottom right) but the system time is 16.20, result 1h offset (sad that the possibility to configure summertime start/end is missing)
Setting up the WiFi active time from 5.30PM until 6PM (testing only):
Note that the real time is 17.44, the WiFi is "Disabled". The RV220W system time is 16.44 with setting "CET +1h".
BUT:
Even when i change the RV220W system time to a Time/Date offset GMT +2h EET has this no issue to the WiFi time profile i set up. The WiFi stay down.
Note:
The WiFi Active Time Settings only working correct when the Clock Source is setting up with "Set Date and Time Manually" (in "Administration" "Time Settings"), but that is not the way.... i don't like to configure time settings manually (no system administrator will do that tinking)
Conclusion:
I think that the WiFi Time setting does not work fine, mean that the WiFi does not include the configured offset as usually system does....
Further:
RV220W firmware is up to date....
Hope Cisco will fix that and add the summer time feature (like in other systems and other manufacturer) in the next FW.....GJinAmsterdam wrote:
I have a MacBook upgraded from Tiger 10.4 to *Snow Leopard OS X 10.6.1.* I'm now using *Time Machine* to make back-ups on a *MiniMax external drive* through an USB connection. However, I wish to make wireless back-ups by connecting the external drive to my *Airport Extreme*. I learned that this wasn't possible until the recent release by Apple of the software update "*About Time Machine and AirPort Updates v1.0*".
this has been possible for a long time, since about February 2008 when those updates came out.
The minimum system requirement for this software update is OS X 10.5.2. I should think this requirement is met because I have upgraded to 10.6.1. But when I try to install the software I get the message that the system requirement is at least 10.5.2. and as a result *I can't continue installing*. Apparently my OS update is not recognized by the software. Is there a solution for this problem? Many thanks.
you don't need to install those updates. they are for leopard, not snow leopard. you should be fine as is. do keep in mind that TM backups to air disks are not "officially" supported but they have worked for a long time. also, keep in midn that you'll need to start a new backup sequence once you move the drive to AEBS as remote backups are stored differently from directly attached ones. -
How to improve the activation time for a standard DSO
Hi all,
I'm facing an issue related to the activation of a DSO. The SM37 log is as follows....
12:03:16 Job started
12:03:16 Step 001 started (program RSPROCESS, variant &0000000006946, user ID BWREMOTE)
12:03:20 Attivazione is running: Data target ZFIZIASA, from 93,627 to 93,627
12:18:00 Overlapping check with archived data areas for InfoProvider ZFIZIASA
12:18:00 Data to be activated successfully checked against archiving objects
12:18:02 Status transition 2 / 2 to 7 / 7 completed successfully
12:18:13 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCTL_4IC45QJA588GKZ0M7JEJ3HCAR with ID 1218130
12:18:19 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCTL_4IC45QJA588GKZ0M7JEJ3HCAR with ID 1218190
12:18:20 Parallel processes (for Attivazione); 000003
12:18:20 Timeout for parallel process (for Attivazione): 000300
12:18:20 Package size (for Attivazione): 020000
12:18:20 Task handling (for Attivazione): Processi batch
12:18:20 Server group (for Attivazione): Nessun gruppo di server config
12:18:20 Activation started (process is running under user BWREMOTE)
12:18:20 Not all data fields were updated in mode "overwrite"
12:18:20 Process started
12:18:20 Process completed
12:18:20 Activation ended
Please have a look into the bold 3rd & 4th line. I couldnt able to analyse where the issue is and what to do to minimize the time for activation.
It is very challenging, please reply!
Please help.
Thanks in adv.
AjayHi Kundan,
Thanks for the response!
Actually, I have two identical DSO, having all the char & KF same and feeding the data from same DS at the same time but the issue is...
1) For 1st DSO, Activation log....
01.07.2010 02:02:41 Job started
01.07.2010 02:02:41 Step 001 started (program RSPROCESS, variant &0000000006946, user ID BWREMOTE)
01.07.2010 02:02:46 Attivazione is running: Data target ZFIZIASA, from 93,751 to 93,751
01.07.2010 02:19:27 Overlapping check with archived data areas for InfoProvider ZFIZIASA
01.07.2010 02:19:27 Data to be activated successfully checked against archiving objects
01.07.2010 02:19:27 Status transition 2 / 2 to 7 / 7 completed successfully
01.07.2010 02:19:28 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCTL_4ICC6UMXYT00Z2DYOQV8QL8CJ with ID 021
01.07.2010 02:19:30 Parallel processes (for Attivazione); 000003
01.07.2010 02:19:30 Timeout for parallel process (for Attivazione): 000600
01.07.2010 02:19:30 Package size (for Attivazione): 020000
01.07.2010 02:19:30 Task handling (for Attivazione): Processi batch
01.07.2010 02:19:30 Server group (for Attivazione): Nessun gruppo di server config
01.07.2010 02:19:30 Activation started (process is running under user BWREMOTE)
01.07.2010 02:19:30 Not all data fields were updated in mode "overwrite"
01.07.2010 02:19:30 Activation ended
2) For 2nd DSO, the activation log is..
01.07.2010 02:01:13 Job started
01.07.2010 02:01:13 Step 001 started (program RSPROCESS, variant &0000000006947, user ID BWREMOTE)
01.07.2010 02:01:35 Attivazione is running: Data target ZFIGL_02, from 93,749 to 93,749
01.07.2010 02:01:43 Overlapping check with archived data areas for InfoProvider ZFIGL_02
01.07.2010 02:01:43 Data to be activated successfully checked against archiving objects
01.07.2010 02:01:53 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCTL_4ICCAR91ALHE1VHSB6GV9PAPV with ID 02015300
01.07.2010 02:01:54 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCTL_4ICCAR91ALHE1VHSB6GV9PAPV with ID 02015400
01.07.2010 02:01:56 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCTL_4ICCAR91ALHE1VHSB6GV9PAPV with ID 02015600
Now my client is asking to lower the activation time for 1st one as it is taking for 2nd one.
I'm toatally blank now that what & how to do it!
The volume of data ...
ZFIZIASA
Active table - Number of entries: 13.960.508
Change Log Table - Number of entries: 13.976.530
ZFIGL_02
Active Table - Number of entries: 21.923.947
Change Log table - Number of entries: 21.938.657
Thanks,
ajay
Edited by: sap.ajaykumar on Jul 6, 2010 1:47 PM
Maybe you are looking for
-
Oracle XML DOM parser - attribute values are not printing on the screen ??
Hi Everyone, I am just trying to use oracle DOM parser to paerse one of my xml file, java file can be compiled and run agianst a xml file, But I cannot see any attribute values printing on the screen.. Appreciate if anyone can help, where I have gone
-
FGV003 - SYST: Period 000 is not valid in financial year variant K4
Hello, I am getting the error below when trying to bring Period 000/2008 from our BCS cube into a basic cube. I've run the "Transfer Global Settings" for our R/3 system but am still getting this error. The BCS does have Period 000 Yr 2008 with FYV
-
To create a room for every user or not?
My application requires that guest/participants do not need to login. They only enter names. Also the meetings are not scheduled. It's on walk in basis where host waits for the guests. In my case, I will have hundreds and eventually thousands of host
-
How MBP can connect to PC with w2k
hi, my mbp sees my old pc with w2k through an internet connection router they share, but the mac cannot access to it. Could anyone give some advices on how to set them up? Thanks a lot
-
TV on MacBook w/ names of shows?
I have a macbook 120g 1.5g ram and i want to watch tv on it. I bought TVMicro Express. But i didnt like it because it didnt say the name of the show. i also want to do "future" recordings like a dvr. thanks for the help.