Activity type is mandatory: enter value between 01 and 07

Hi guys,
I would like to ask you for help..
Recently I updated the App CRM Sales to 2.0.3
Now, when I try to create an activity/task in IPhone(IOs6), it shows me this error "Activity type is mandatory: enter value between 01 and 07".
Do I need to apply any SAP note?
Does anybody have any idea?
Regards,
Eder.

Hi Masayuki,
Thanks again for you help.
So, When I create an Activity/Task in CRM Backend I don´t have problem. I can see in my mobile device (Iphone).
The problem is when I try to create a new activity in App CRM Sales (Iphone).
I think that there is some obligatory field in CRM Backend, but that in App CRM there isn´t to filled in it.
Thanks,

Similar Messages

  • For the Attribute Movement type(BWA) we use Value " 201" and not "101" why?

    Hello Experts,
    We are in SRM 7.0 classic scenario,
    For the Attribute Movement type(BWA) we use Value " 201" and not "101" and provide the Source syst(backend R/3)
    Can you all plz help me understand what is the difference if use value "101" for the  Attribute Movement type(BWA)
    Also,can you all plz help me understand if we shd use value "101" or "201" for the  Attribute Movement type(BWA) and under what scenario.
    Any pointers will be highly appreciated.
    Thanks & Regards,
    RKS

    Hi,
    Movment type " 201 maintained for the Classic scenario only.
    It is necessary to maintain the attribute if the default material group for a given user (or) sit is set to a backend logical system. The EBP system knows that if the user is set for backend procurement ,that there might be a possibility for a reservation to be generated therefore it checks to see that a value for this attribute is  maintained. The BWA value should be defined  for the  as 201 preceeded by the logical system and a backslash.
    101 should not be used. This isfor the Good receipt.
    In the extended classic scenario when you do the confirmations in SRM the movement type 101 will be created in the
    backend system (R/3 or ECC6.0)
    Regards
    Ganesh Kumar .G

  • Getting an error while activating a planning area "Enter values for planning horizon From and planning horizon To for the storage time profile level"

    Dear S&OP community,
    I am getting following error while creating a planning ares in a newly installed sandbox. "Enter values for planning horizon From and planning horizon To for the storage time profile level".
    This what I did...
    1) Created new attributes and master data objects and activated them successfully.
    2) Time profile created and activated successfully
    3) Trying to create planing area by assigning  time profile in step 2 and assigned master data from step1..Unable to save the data and system returns 
    this error - "Enter values for planning horizon From and planning horizon To for the storage time profile level"
    My understanding is time profile needs to be active  but doesn't have to have values...
    Any help is appreciated.
    Thanks,
    Krishna

    YS,
    Here are my time profile settings
    Level       Name          Display Horizon - Past  Display Horizon - Future
    1             Monthly     -6                                       11         
    2             Quarterly     -2                                       3
    3             Yearly        -1                                       2
    Time profile is active and but time profile data is not loaded
    Thanks,
    Krishna

  • How to run user enter value query and get result on Text item

    Hi ,
    I'm really newbie at JDeveloper and ADF , I want to run the query below , before with Forms i just adding :TEXT_NAME to get the entered users value , what I have to do now with ADF , really it's not clear question and I would appreciate any help with this ,
    select
    nvl(min(substr(a.starttime,1,8)),0) Service_Start_Time, nvl(sum(a.sessionvolume),0) Total_Traffic_KB
    FROM
    aaa_bill a
    where
    msid=:TEXT_ITEM
    and starttime >=(select max(fee) FROM aaa_bill
    where msid=:TEXT_ITEM and accountreason=5) ;

    You can use a ADF parameter form for this requirement.
    https://blogs.oracle.com/shay/entry/combining_multiple_queries_and

  • Activity Type Mandatory in Repetitive Confirmation

    Dear guru ,
    When I run confirmation (MFBF/MF42N) i can post actual activities for a specific operation.
    I have one of this activity not relevant for controlling , itu2019s only used as statistical object for PP.
    Why the system consider the activity type as mandatory for every standard value parameters ?
    Can I have a chance to avoid that all the activities are relevant for controlling ?
    Thanks.

    Dear ,
    For the same operation i have one standard value relevant for CO and one standard value not relevant for CO.
    For the not relevant in view costing of work centre if I set no activity , in MFBF the standard value isnu2019t displayed and I cannot enter any value.
    If I set an activity in view costing of work centre the system required an activity type in MFBF.
    How can avoid in MFBF (posting actual activities view)  to enter an activity type but to confirm a quantity for a value not relevant for CO ?
    Thanks

  • What are the difference between Activity types & SKFs

    Dear Friends
    Can any body help me regarding, what are the main differences between Activity Types & Statistical Key Figures(SKFs).
    Thanks, in Advance

    Hi Prabhakar,
    Both are used as tracing figures. The major difference is that Activity type has price on its own and its gets summed up at the time of allocation. The sum figures debited to the receiving cost object and credited to sending cost object. Activity type cannot stand alone.
    But it is not the case with SKF. SKF are only used as tracing factors and do not have price unlike activity type.
    Example
    In the case of activity allocation of Labour hours, the activity type of Labour with price shall be used.
    In the case of statistical figure, take the example of Canteen expenses and its allocation between the Cost objects on the basis of head count of each cost object. :
    Hope this answers to your query!

  • MASS activity type in router

    I'm hoping someone has any ideas if CA85N can really MASS change activity types. I have been testing the transaction in our test client and have entered the material, plant, work center in the selection criteria and then in the change tab I have entered the new activity type and click the copy button.
    However, the system keeps giving me errors that there isn't an activity type for standard value for setup. But I'm not changing setup, I'm trying to change labor.
    I also get another error "consistency check is not successful when changing operation 0004. But for this one material I'm not changing operation 0004. I'm changing operation 0030.

    Hi,
    Activity Type will for a Work Center and not for the Standard Value Key. Hence when you are trying to change the activity type system will try to modify for the standard values for Setup / Operation / Labour etc. In your case I think you have not entered any activity type for the Setup, hence it is showing that error.
    I suggest you to go tcode : CR02/CR03 and check in the costing tab whether you have maintained the activity type for Setup or not.
    Hopw this will help you.
    regards
    radhak mk

  • Unable to enter value in editable field of ALV (set_current_cell_via_id)

    In the Editable screen of ALV, I have to set the cursor on the 3rd field 'VBELN' ( which is editable ).
    Using the method set_current_cell_via_id of ALV grid the focus has been set on the particular field. The field Sales order 'VBELN' is already set as editable (EDIT = 'X').
    But still I am unable to enter values unless and until I click anywhere on the screen.
    Please help me with the solution.
    Thanks in Advance.

    No...Whenever my screen is called, the focus is set on the 'VBELN' field but I can not enter the value.
    See the code below:
    Display the ALV report.
          CALL METHOD grf_alv_popup->set_table_for_first_display
            EXPORTING
              is_layout                     = gs_layout
              it_toolbar_excluding          = gt_exclude
            CHANGING
              it_outtab                     = fp_output[]
              it_fieldcatalog               = gt_fieldcat_popup
            EXCEPTIONS
              invalid_parameter_combination = 1
              program_error                 = 2
              too_many_lines                = 3
              OTHERS                        = 4.
          IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
               WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
          ENDIF.
    ls_row-row_id = 1.
    ls_col-fieldname = 'VBELN'.
          CALL METHOD grf_alv_popup->set_current_cell_via_id
            EXPORTING
              is_column_id = ls_col
              is_row_no    = ls_row.
    With the method set_current_cell_via_id, the field VBELN displays as highlighted but to enter the value I need to click on the screen first.

  • Activity type on service order

    Hello Gurus
      I want to default the activity type of an operation to 2300. Can you please guide me how to do it
    THanks
    Vidya

    hi ,
    you mean defaulting of activity type based on operation control key ? if yes then this cannot be done i think .. activity type is mentioned in work centers and based on the work centers entered in operations you would have selection of activity type ...
    Check whether you can do the same with set/get parmater ID  in ABAP ..
    regards
    pushpa

  • Activity Type in Capacity reqirement

    Does activity type in work cetner as any influenc on capacity requirement?

    Dear ,
    Capacity Requirement is based on the available capaciy and overload in work centre  and subsequently re-scheuling operation in CM21   and CM01.
    However , Activity type are assinged to work centre and cost centre assinged to work centre .Here the Standar value key plays important role to caalcule the labour hors , machine and set up hrs based on Formula Key in work centre .Now the available capacity  and capacity requirement (Hrs) will be calaculated based on  the Capacity requirement in CM21  and cost of man hours , machin hrs will be calcualted throygh cost centre and activity type assinged under that work centre .
    So indirectly , activity type has infuelnce in costing of capacity requirement
    Hope it will clear ur idea
    Regards
    JH

  • Linking activity types with routings

    Hi,
    We have several work centres in one production line. But in costing side we have only one cost centre for one production line.If we use common activity types for all these work centres and if update the common activity rate in cost centre, how we are to differentiate costs among different work centres in same production line.
    Please advice.
    Regards,
    Madhushika

    Dear ,
    What I understood from your requirement is that you have multiple work centre having same Activity Rate-Activity Type  , Same Production Cost Centre .In that case you need to analysise Work Centre Wise operation cost or Operation wise cost at that Work Centre level . Basically , this should be differentiated at operation level based on the Standrad Values , total duration ( setup , machine , labout hrs ) , Formula Key invloved .
    From reporting point of view , if you goto -COOIS -Operation -Standrad Profile with Order Type , Plant code  and exceute then it will display with Operation Timings as well as if you can goto Select Layout-Change Lay out option -You can choose Price , Costing Variant  for same cost centre  with different Work Centre and operation combination .
    You can check the same in COHV , CO02-Production Order  Header-Costing -Cost Analysis -Itemisiton -Orgin Group
    Hope this will give some idea
    Regards
    JH

  • Required entry field "Trip Activity Type" is empty

    In Travel management , when I create a travel request, Activity Type is a required field, I select a activity type when I try to save the travel request I get  this error.
    Required entry field "Trip Activity Type" is empty
    Message no. PTRA_WEB_INTERFACE078

    Hi,
    I think you have to maintain activity type for that year. check KP06 and KP26.
    Regards

  • Work Center  takes only 6  activity types

    Hi
    I    have   6  types of labor  activity type  ( L1 to  L6 )  ,  1  machine and  1 set up.  Total  8  activity  types.
    Now   if   the  planned  labor  is  eg  L1,  the  actual  may  be  L6.  But    I  cannot  assign     all   6  labor  type in the  work center.    Work center  allows  only  upto  6  activity types.
    I   checked  in  HR  module,  where  in   CAT2  we  can   record  ACTUAL  activity type  /  order  / employee data.  This can be moved to  controlling.      But  when  it  is  planning,  then  I  dont  know.
    How  can  I   accomodate  all  6  labor  type in the  work center.
    Thanks
    kamala

    Hi Kamala
    If you are in a production order scenario -
    You will have to create 2 work centers... One for Labor and another for Machine/Set up... there by you will have 2 operations in routnig
    If you are in a process order scenario -
    You can do with one single work center... This will accomodate 6 act types..
    Apart from work center, there is a concept of "Secondary Resource" in Process order scenario, which can accomodate your other 2 act types...
    Regards
    Ajay M

  • Activity Type at cost center

    Hi All,
    Is Activity types are used only at production cost centers or u can use for any material use in general, i mean, Say i ahve 2 machinerys, i spend bearings and oil for repairs, i called this activity as antifriction. i issue bearings and oil towards this activty to machinery cost center. now i want a report like how much cost i spend on antifriction activity for machine 1 & 2. How should i map my cost ceners to get this report. Can any body tell me what exactly activty types used for?
    Thanks in advance
    Sarayu.

    Hi
    Activity types classify the activities produced in the cost centers within a controlling area. To plan and allocate the activities, the system records quantities that are measured in activity units. Activity quantities are valuated using a price (allocation price).
    In Overhead Cost Controlling, costs based on the activity type are posted separately in fixed and variable portions. When you divide the activities of a cost center into activity types, you should consider whether the costs can be allocated effectively to the activity types.
    You can plan, allocate, and control costs either at the activity type level of a cost center, or at the cost center level.
    You can also assign the activity type of a cost center directly example: deprecitation postings.
    You can assign one activity type, multiple activity types, or no activity types to a cost center.
    I hope this helps.
    Regards
    Kavitha

  • Activity type field in Maintenance Order

    Hi all
    My client requirement is that activity type (LARNT)should me mandatory in maintenance orders to capcture the cost with out fail.
    Could any body suggest me that when we need to do that?
    Regards
    Srinivas

    Hi
    Since the work center is mandatory you can make the activity type mandatory for workcenter master data record in OPFA IMG
    or check in OIOPL where you can make the activity type as mandatory ,but i think it will only work once you nagivate the operation tab
    or check whether user exit order at save will be useful
    regards
    thyagarajan

Maybe you are looking for