Activity type problem
Dear pp brother's
Here by i am confirming production order (co15) but at the time of saving
it show the msg that
A master record for C10030/STEAM exists only in 2007
it ask me to go KP26 T-code
pls help me for the same
With regards
Amit Naik
Dear,
What is the error now?
Follow the below steps,
1. Check Cost center using T code - KS02
2.Create an activity type using T code - KL01.and check KL02 (Steam)
3.Assign the Rates for an activity type & cost center combination using T code KP26.
4.In the input screen of T code KP26 ,enter version as 0, from period 1 and to period as 12 and the Fiscal
Year as 2008,enter the cost center, activity type click on overview screen (F5)---> enter the per hour Rate
Under Fixed price and set value as 2 for distribution key and plan price indicator as 3.
5.After performing this ,while creating the work center CR02 ,this combination of activity type & cost center should be assigned.Then while creating routing/task list this work center can assigned for performing operations.
EX,
If you have very limited no.of activity types you can plan manually in KP26 for new fiscal year 2009.
e.g
Version:0
From Period:1
To Period :12
Fiscal Year:2009
Cost center: 1000
Activity type :123
click on overview(F5)
enter fixed price 99.00
Hope it will help you.
Regards,
R.Brahmankar
Similar Messages
-
CATS Problem with Activity types, it takes the first 6 digits of PERNR
Hello Gurus!
I have configured cats and maintained infotype 0315. When i go to CAT2, i dont see any default values on the screen from 315. When i try to call the cost center and activity type,. enter the times and hit enter, it hits an error saying: Activity type 001131is invalid for 00113199. It doesnt speak abt the activity type i assigned, it probably takes the first 6 digits of personal number as the activity type and throws an error.
Please help me what to do with this... its very urgent..
Points granted..
Thanks,
Soniya SinghWhich version of SAP are u using. I don't see any message with your description in the message class.
I think the values on CATS are only defaulted when u give the WBS element and hrs and press ENTER. Try this and u should be able to get the values defaulted from 315 assuming you have set the default values in CAC1 and also please check the settings in the Initial screen of CAT2 if any other values are getting defaulted in Persons tab and also check ur activity type has the valid Controlling area.
Edited by: Madhu Gudur on Feb 21, 2008 5:58 AM -
I am facing a problem with Visual Studio. Following what I did:
Copy and modify a workflow in sharepoint designer 2013
Import the generated files (xoml, rules, config) in a Visual Studio 2012 module
Build
I cannot build nor package the solution, getting the "The root activity type is invalid" error.
I read a lot of forum but I didn't figure out how to solve the issue.
Any help is really appreciated.
DarioHi Dario,
According to your description, my understanding is that you got an error when you imported SharePoint Designer reusable workflow into Visual Studio 2012.
Please check your process per the article below, compare the result.
http://msdn.microsoft.com/en-us/library/ee231580(v=vs.110).aspx
If this issue still exists, please feel free to let me know.
Best Regards,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support -
Hi all,
In PS we donu2019t capture any cost. In such case, While entering timesheet, the system through an error message, to enter sender Activity type and it is not allowing to enter timesheet.
Now, what should be done to skip entering activity type and enter timesheet without entering activity type?
I guess it is controlled through work center, by not maintaining costing tab, but the system does not allow to save the work center without entering the cost center under costing tab.
Please suggest, in entering time sheet without activity type
Thanks,
ChandruHi,
Go to --> SPRO --> Cross Application Components --> Time Sheet --> Settings for all User Interfaces --> Time Recording --> Choose Fields -->Data Entry section --> Activity types
Double click and in reference to data entry profiles we can restrict the entry for the activity type whether it is required / Display / Hide / Input.
Check and confirm whether the problem is solved
Regards,
Selva -
IW41: automatic update of activity type when changing the work center?
Hello colleagues,
when doing a time confirmation with IW41, we have following problem:
In the PM order the operations are assigned to a neutral executing work center, as it not known which individual technician is completing the operation later on.
Now when the individual technician is entering the time confirmation with IW41, system is proposing the work center indicated in the operation from the PM order, then technician is overwriting the work center proposal with his own individual work center ID (and pressing Enter), but the activity type is not getting updated automatically. So the technician must jump to field "activity type" and choose the correct activity type.
Is there any solution (hopefully with user exits!) to have the field "activity type" automatically updated with the one indicated in the work center, which was entered manually?
Thanks for your ideas!
Regards,
PatrickHi Maheswaran,
yes, as usual all PM work centers have only 1 activity type assigned in the costing tab.
We also checked the settings of the activity type (KL03), but we just found one difference: the price indicator was set on 3 "Determined manually" - we've changed to 1 "Plan price, automatically based on activity" (..same setting as for the act. type of the work center with working update of act.type).
We tested already all possible constellations and scenarios, but we have not found any good reason for the behaviour.
Thanks for your efforts so far!
Patrick -
Creation of Sales Activity type
Hi,
I am creating a new Sales activity type (say: ZEEE)
In SPRO I have defined this sales activity type but few fields are greyed out. I have to fill 'TextDetermProc' under TEXTS section and 'Partner det' under PARTNERS section but both are greyed out.
Can some one pls guide me how to fill these two fields?
Thanks and regards,
Pankaj Bist.Hi Marcin,
Text determination Procedure and Partner determination procedure is already defined in BASIC FUNCTION.
But my problem is: how can i assign a particular text/partner determination procedure to my activity, as these two fields are GREYED-OUT in the sales activity creation screen.
Regards,
Pankaj Bist. -
How to set activity type for a cost center
i was practicing the split valuation topic and for the that i was making a routing for a product so that i can have that product for inhouse production.
while using ca01(to create routing), i am facing a problem with the activity type.
when i am setting up the operation i am getting an error " activity type # is not set up for cost center 10004220 in year 2007"
can you please tell me how should i come out of it.
thankyou very muchhi Nandha, i am sorry but i could not do it. i am new in this. let me make my problem more clear to you.
i was creating a routing using ca01
after puttig all the details i switched to operations tab and in operation tab i put workcenter as (1111 - lathe, may be i am wrong as i told you i am just practicing).
i did not put anything on that screen and then when i pressed enter it took me to another screen with name Operation check.
here is the layout of the problem on that screen
std val unit activity type efficiency
set up min 1422
machine min 1421
labor min 1420
and then curser being on the std value i am getting this error "activity type 1422 is not set up for cost center 1000 4220 in the year 2007.when i am ignoring it it is switching to next std val coloumn and the same error.
thankyou for your time -
Operations and Activity type.
Summary :- A service order was created with an operations.The complete confirmation was done and 3 operations were confirmed. 1st and 2nd operation have same activity type and 3rd has different activity type. A document was created through DIP profile, but it has entry of only 2 materials.We wanted 3 materials. When checked in DIP profile, the summarization of activity type is not ticked; it means it will summarize the activity types.
Problem:- The activity types should not summarize. We do not want to use the activity summarization in DIP profile in Usage --> characteristics, as if we change that it will affect other documents using the DIP profile. Kindly suggest any other solution for this issue.
Thanks.Hi Satish,
In Materail determination define 3 service products
and in criteria assign those three activity types to those service products so that in billing you will get three materials
try and pls let me know
if it is useful to you pls reward me with points
regards
Satish -
Error Activity type 502000 not set up for cost center 1000 cc111
hi all
While creating a work center (CR01) I need to enter a cost center and activity type for machine hours. However, while entering the activity type the following message appears:
Message no. CR 061
You are attempting to assign activity type XXXX to the work center. However, this activity type has not yet been set up in controlling area 1000 for cost center xxxxx.
while creating the activity type in KL01 i have already given * in cc category so it should go for all cc
What could cause this problem?
Thank you in advance,
Kind regardsHi,
Check whether the activity type is maintained at the correct controlling area via KL03. If not, then create the activity type (KL01) in the corresponding controlling area.
Regards,
Darrel -
How to delete a activity type from KP26 which has executed KSS2 and KSII?
Hi experts,
I maintain three activity type to one cost center by KP26
cost center 1:
activity type 1
activity type 2
activity type 3
last month I run KSS2 to split the price and also run KSII, so these three activity already have actual cost.
This month I find activity type 3 should not be assigned to cost center 1, so I want to delete it from KP26 , but the system didn't let me to delete it , how to resolve this problem??
error message:
Costs already posted under cost element 6100016. No deletion possible Message no. K8098
Under cost element 6100016 there is a splitting record. No deletion p Message no. K8082
Plan values exist in other periods. No deletion possible. Message no. K8085
Actual price for P111CN33/PMT001 already entered; Deletion not possib Message no. K8184
thanks very much
lanceHi,
Please check the long text of these messages, it explains clearly. There are plan/actual dependent data existing for related cost elements, before deleting the records for cost center/activity type, all the dependent data must be deleted first.
1. Run RKACSHOW to check on those entries!! Please first ensure COKA entries deleted. You may delete the COKA entries by
executing the program RKPLNC18.
2. Subsequently, CSSL entries for cost centre and activity type, use RKPLNC29 and then the actual CSSL entries with RKPLNC13.
3. You may use RKPLNC39 to delete a COKP records once the no corresponding COKA exists.
4. COSS, COKS, COKP and COKL records could be deleted via KP06.
Please notice, that even if you reverse all postings for the relevant object, the records in the CO tables still exist even
if the balance value is 0.
These records prevent the deletion.
regards
Waman -
PS: planned costs by activity type
Hi experts,
I have a problem about an activity type.
I have created an activity type and planned it on a cost center. This activity type is inserted in a work center with standard formala key "SAP003".
I insert my activity type in an internal processing of WBE and I calculate costs for this internal processing.
When I see the cost report of internal processing, the system returns this message: "No costs were calculated for the activity".
Why? Is it correct?
Thank you
NicolaHi Ashish Jain,
I have planned activity type/price with the transaction KP26, but the system doesn't return any value in planned costs of WBE.
Why?
Thanks
Nicola -
Activity type is mandatory: enter value between 01 and 07
Hi guys,
I would like to ask you for help..
Recently I updated the App CRM Sales to 2.0.3
Now, when I try to create an activity/task in IPhone(IOs6), it shows me this error "Activity type is mandatory: enter value between 01 and 07".
Do I need to apply any SAP note?
Does anybody have any idea?
Regards,
Eder.Hi Masayuki,
Thanks again for you help.
So, When I create an Activity/Task in CRM Backend I don´t have problem. I can see in my mobile device (Iphone).
The problem is when I try to create a new activity in App CRM Sales (Iphone).
I think that there is some obligatory field in CRM Backend, but that in App CRM there isn´t to filled in it.
Thanks, -
I am working on an Activity Box problem. I got some errors, Please Help and Thanks in advance!!!
My program likes:
import java.awt.*;
import java.applet.*;
import java.awt.event.*;
/*ActivityBox Applet */
public class ActivityBox extends Applet {
//Declarations
String panelString = new String("News from the field.");
String southString = new String("South Button");
String infoString = new String("Type here.");
String kbString = new String("East ");
MousePanel cp = new MousePanel(100,100,panelString);
MousePanel ep = new MousePanel(100,100, kbString);
MousePanel np = new MousePanel(50,50);
MousePanel sp = new MousePanel(100,100);
MousePanel wp = new MousePanel(100,100,"West - Type here");
TextField myText = new TextField(infoString);
Button southButton = new colorChanger(southString);
colorChanger Blues = new colorChanger(Color.blue);
buttonListener Zap = new buttonListener(cp, myText, ep);
kbListener Tap = new kbListener(ep, kbString);
//init
public void init() {
setLayout(new BorderLayout(5,5));
np.addMouseListener(Blues);
add("North",np);
np.add(myText);
np.setBackground(Color.Cyan);
sp.addMouseListener(Blues);
southButton.addActionListener(Zap);
sp.add(southButton);
add("South", sp);
sp.setBackground(Color.Cyan);
ep.addMouseListener(Blues);
add("East",ep);
ep.setBackground(Color.Cyan);
wp.addMouseListener(Blues);
wp.addKeyListener(Tap);
add("West",wp);
wp.setBackground(Color.Cyan);
cp.addMouseListener(Blues);
add("Center",cp);
cp.setBackground(Color.Cyan);
/* MousePanel */
class MousePanel extends Panel {
public String nameTag = "";
Dimension myDimension = new Dimension(15,15);
//Constructor 1 - no name tag
MousePanel(int h, int w) {
myDimension.height = h;
myDimension.width = w;
//Constructor2 - with name tag
MousePanel(int h, int w, String nt) {
myDimension.height = h;
myDimension.width = w;
nameTag = nt;
//paint
public void paint(Graphics g) {
g.drawString(nameTag,5,10);
//change text
public void changeText(String s){
nameTag = s;
repaint();
public Dimension getPreferredSize(){
retrun myDimension;
//getMinimumSize
public Dimension getMinimumSize(){
return myDimension;
class colorChanger implements MouseListener {
private Color oldColor = new Color(0,0,0);
private Color changeColor = new Color(0,0,0);
//constructor
colorChanger(Color it){
changeColor = it;
//Methods required to implement MouseListener interface
public void mouseEntered(MouseEvent e) {
oldColor = e.getComponent().getBackground();
e.getComponent().requestFocus();
public void mouseExited(MouseEvent e) {
e.getComponent().setBackground(oldColor);
e.getComponent().transferFocus();
public void mousePressed(MouseEvent e) {
public void mouseReleased(MouseEvent e) {
public void mouseClicked(MouseEvent e) {
class buttonListener implements ActionListener {
private MousePanel it1 = new MousePanel(0,0,"");
private MousePanel it2 = new MousePanel(0,0,"");
private TextField from = new TextField("");
private String words = new String("");
//constructor
buttonListener(MousePanel target1, TextField source, MousePanel target2){
it1 = target1;
from = source;
it2 = target2;
//Methods required to implement ActionLIstener interface
public void actionPerformed(ActionEvent e) {
words = from.getText();
it1.changeText(words);
from.setText("");
it2.changeText("");
}//end buttonListener
class kbListener implements KeyListener {
private MousePanel it = new MousePanel(0,0,"");
private String putString = new String("");
//constructor
kbListener(MousePanel target, String display){
it = target;
putString = display;
//Methods required to implement KeyListener interface
public void keyPressed(KeyEvent e) {
public void keyReleased(KeyEvent e){
public void keyTyped(KeyEvent e){
putString = putString + e.getKeyChar();
it.changeText(putString);
}When I compiled it, I got:
ActivityBox.java:18: cannot resolve symbol
symbol : constructor colorChanger (java.lang.String)
location: class colorChanger
Button southButton = new colorChanger(southString);
^
ActivityBox.java:24: cannot resolve symbol
symbol : constructor BorderLayout (int,int)
location: class BorderLayout
setLayout(new BorderLayout(5,5));
^
ActivityBox.java:28: cannot resolve symbol
symbol : variable Cyan
location: class java.awt.Color
np.setBackground(Color.Cyan);
^
ActivityBox.java:33: cannot resolve symbol
symbol : variable Cyan
location: class java.awt.Color
sp.setBackground(Color.Cyan);
^
ActivityBox.java:36: cannot resolve symbol
symbol : variable Cyan
location: class java.awt.Color
ep.setBackground(Color.Cyan);
^
ActivityBox.java:40: cannot resolve symbol
symbol : variable Cyan
location: class java.awt.Color
wp.setBackground(Color.Cyan);
^
ActivityBox.java:43: cannot resolve symbol
symbol : variable Cyan
location: class java.awt.Color
cp.setBackground(Color.Cyan);
^
ActivityBox.java:72: cannot resolve symbol
symbol : class retrun
location: class MousePanel
retrun myDimension;
^
.\BorderLayout.java:8: setLayout(java.awt.LayoutManager) in java.awt.Container c
annot be applied to (BorderLayout)
p.setLayout(new BorderLayout ());
^
.\BorderLayout.java:9: cannot resolve symbol
symbol : variable NORTH
location: class BorderLayout
p.add("North", BorderLayout.NORTH);
^
.\BorderLayout.java:10: cannot resolve symbol
symbol : variable SOUTH
location: class BorderLayout
p.add("SOUTH", BorderLayout.SOUTH);
^
.\BorderLayout.java:11: cannot resolve symbol
symbol : variable EAST
location: class BorderLayout
p.add("EAST", BorderLayout.EAST);
^
.\BorderLayout.java:12: cannot resolve symbol
symbol : variable WEST
location: class BorderLayout
p.add("WEST", BorderLayout.WEST);
^
.\BorderLayout.java:13: cannot resolve symbol
symbol : variable CENTER
location: class BorderLayout
p.add("CENTER", BorderLayout.CENTER);
^
14 errorsAgain compile ur code .... I don't seem to get all those errors
-
Assign the desired activity type to cost center 1102 within cost center acc
Dear all,
I am facing the problem mentioned as subject during entering the activity type.
please guide me to overcome this problem.
rgds,
Vijay MankarHi Vijay,
The problem is as expected by me it is due to assignment and acitivty price details missing. This needs to be created in KP26.
Once you enter txn KP26 you need to type active version generally "0", then enter period 1 to 12, Fiscal Year "2007" and populate field "Cost Center" and "Activity type" now use "F5".
In the overview screen populate the value "Fixed Price" and "Variable Price" and save the transaction. (We are entering price for individual period but same across all period)
Now try creating Workcenter and assigning the Cost Center and Activity type. It should work.
Reward your points,
Regards,
Prasobh -
Activity type int processing activity
Dear All
I have creat activity type & assign this activity type to work center in "ActTypeProc." IN KP26 , i maintain activity price & all other things but when i maintain this activity type & work center in WBS for respective internal activity system not shown me plan cost as well as when i confirm the activity system not shown me actual cost also. Pl gave some input on this
RegardsHi nivruti,
check ur work center whether u have put formula sap008 in other formula in capacity tab page. in schedulling tab page formula sap004 . check whether in costing tab page ur entries are correct regarding activity type and cost center.
In activity type put * in cctr catagory , activity type catagory 1, give secondary cost element (this can b a reason of ur problem) in allocation cost element.
Apart from this also check costing variant whether actual and planned has been maintained properly or not.
Regards
Abhishek Sinha
Idhasoft, India
Maybe you are looking for
-
Ipod nano 7th gen problems synching
hello, for the past 2 days, I have been battling an ipod nano synching issue. This ipod has been working flawlessly for the past year. And then all of the sudden, without warning, I tried to add additional music and I could not. I cannot remember the
-
Hi, In my scenario, I would like split a message with key fields. -> File 1 File -> File 2 -> File n but with each files, I would like attach a referential file: -> File 1 (Ref) File -> File 2 (Ref) (Ref)
-
Color changes between Lightroom and Photoshop Elements
I have a new monitor and I have the SyderPro4 calbration software. My monitor is the Dell UltraSharp U2713HM. When calibrated with the Syder my colors are different when I go into different programs. The same photo looks different in Lightroom tha
-
Hi All :D I have a datagrid with an arrayCollection as its data provider. One of the columns, named address, is the concatenation of three addresses from my arrayCollection (address1, address2, address3) My problem is I do not know how to implement t
-
Hola He leido que AW incorpora MACLINKPLUS y que permite trabajar con formatos de MSOFFICE. Sin embargo, no he podido averiguar si permite trabajar directamente con formato WORD sin importar el documento y convertirlo. ¿se puede crear documentos para