Activity type value
Dear All,
In routing i have maintained 2 activity type and for the first activity i have given 1 hr and and for the second activity field is blank.
but while doing confirmation both the activity value are shown as 1 hr. How can i make the second field blank, though i have not given any value in routing for second activity system takes the same value of first activity.
regards,
Joseph.
Dear Ranjith,
The activity timing is calculated correctly with the formulas given, but how the same values are coming for the second activity..?
Regards,
Joseph
Edited by: joseph5885 on Sep 5, 2011 4:59 PM
Similar Messages
-
Difference in activity types values
Hi,
I have an issue that, the activity type values in the confirmation screen of process order is coming different as from the master recipe of the process order.
In recipe,
MACHIN - 48 H
LABOUR - 4 H
POWER - 82 KWH
Edited by: Jish... on Jan 28, 2010 9:17 AMI am really sorry ...Some mistakes....Please check the following thread.
I have an issue that , the activity type values in the confirmation screen of process order is coming different than from the master recipe of the process order.
In recipe,
MACHIN - 48 H
LABOUR - 4 H
POWER - 82 KWH
In confirmation screen,(tab-quantity/activity)
Planned for confirmation
MACHIN - 360 H
LABOUR - 360 H
POWER - 360 KWH
It seems that the value(360) is coming from the pooled capacity(CM03-standard overview,
from 28/01/2010 to 11/02/2010 , 15 days , 24*15 = 360 ).
How does this happen?
Any changes in the customization?
Regards,
Jish.
Edited by: Jish... on Jan 28, 2010 9:30 AM
Edited by: Jish... on Jan 28, 2010 9:30 AM
Edited by: Jish... on Jan 28, 2010 9:31 AM -
Activity Type reporting in REM.
Hi PP Gurus,
The requirement is to club Activity types with Alternate activity description. We used AFRU table to extract confirmed activity type values from REM backflush and table TCROT to take the description of Alternate activity types. But whenever we are trying using ABAP Query (SQVI) using table join conditions system is giving some Warning Error message.
How could we rectify this problem. Further comments in this context are most welcome.
Thanks & Regards,
Abu ArbabHi Rajesha,
Replying late due to some health problems.
But it is the requirement, what best can be to rectify this requirement?
Thanks & Regards,
Abu Arbab
Hi Rajesha,
Thanks for your kind reply.
Thanks & Regards,
Abu Arbab
Edited by: abu arbaba on Sep 9, 2008 1:08 PM -
Activity type is mandatory: enter value between 01 and 07
Hi guys,
I would like to ask you for help..
Recently I updated the App CRM Sales to 2.0.3
Now, when I try to create an activity/task in IPhone(IOs6), it shows me this error "Activity type is mandatory: enter value between 01 and 07".
Do I need to apply any SAP note?
Does anybody have any idea?
Regards,
Eder.Hi Masayuki,
Thanks again for you help.
So, When I create an Activity/Task in CRM Backend I don´t have problem. I can see in my mobile device (Iphone).
The problem is when I try to create a new activity in App CRM Sales (Iphone).
I think that there is some obligatory field in CRM Backend, but that in App CRM there isn´t to filled in it.
Thanks, -
1th Activity type confirmed copy value into 2th Activity type:
Hi Gurus.,
I had a problem in production order confirmed (PP-PI), COR6 transaction
I need what 1th Activity type confirmed (value) are copied in 2th Activitiy type cofirmed inside the one order production, so, both value corfimed are equal and the same time, I had customization all the parameters in resources who standard value key, Formule for processing capacity requirements in concordance with standard value key and the calculation of costs of a work center's activity type.
But in the cofirmation Activity (COR6) the user´s key put Quantity in first Activity manually and execute (enter), and this first quantity activity don´t population the second field activity type.
Insite the Resource the costs formule is:
Activity type one: ZPP001
Activity type two: ZPP001
Capacity calculation formule: ZPP001.
What happen about this fault?
Best Regards.,
Julio César VillegasHi,
You do not get Second Activity same as first Activity in this scenario.
When we give value in First Activity manually for say about 10 Hrs, it doesn't copy to Second Activity.
As you said Activity 1 and Activity 2 are have same activity types and formulaes then also it will take Actual Values from Master Recipe and will be displayed.
If you want to achieve your requirement you should get ABAP help to write Program. you can use Enhancement.
Thanks
Nag -
Activity type to Value categories
Dear Experts,
Can you please tell me how to assign the Activity type ( like Labor hour ) to Value categories.
AR.Hi Amit,
Actually activity type is not directly assigned to value categories.
We maintain the value categories in SPRO & cost elements are assigned to value categories.
CO person created the activity type & herein mentions cost elements too.
Further activity types are entered in work center master data and thus it appears in maintenance order.
Sundar -
Revaluation of Activity type is not getting updated in Production Order
Hi,
I have run KSII , for actual activity price calculation. After this , the revalution of production orders was done.
But I am not finding any entry in Production order with a value of variance between Actual Price and Plan Price of the Activity type.
It sould come in the production order.
What can be the reason?
In OKEQ, for the Version '0' and the fiscal year, Revaluation has the entry ' 1.Own Business Transaction'. I hope this is correct.
But still the revalaution line item is not showing in Production Order.
Please help.
regards
KamleshHi Paolo,
Yes, MFN1 ran perfectly and I am also able to see the details in the screen.
My concern is, this revaluation should also have affect on Production order, thats what not happening.
Or let me know where can I see the affect of revaluation on Production orders.
regards
Kami -
Confirmation of activity type in Process order -Impact in FI.
Dear All,
On doing a confirmation of a activity type for a process/ Production order - values get posted to secondary cost element which has been assigned to a acitivity type. This means only a impact in controlling but not in FI
How woould the booking happens in FI ?is it not required to book in FI, if yes, why.
Please suggest.
Thanks.Hi Daya
1. You can calculate activity price for plan in KSPI and for actual KSII for respective CCtr and activity type...but some times people manually update price at KP26 directly which in my opinion is not right way because price is either more or less than the real calculation in KSPI and KSII...
2. However in your case price is directly updated in KP26 against activity type..when confirmation is done in order this rate * activity qty is your value posted in order level and at the same time respective CCtr is also credited by this amount which you can see in CCtr report
Example: CCtr XXXX01
Activity type 999999
Sec cost Element for activity type 999999 (43 cat)
Suppose you have booked FI entries for some expenses like Salary in F-02/FB50...against CCtr XXXX01 So your CCtr XXXX01 is debited by Salary amount and this amount will be absorbed in product through activity for which you need activity price and confirmation.
FI entry is booked your expense in GL a/c Salary and same time debited your CCtr through CE salary....Now when you charging this expense in product through prod order you are doing it through confirmation of activity qty which in turn calculating value by taking price from KP26 and qty from confirmation.
Kamal -
How to get internal order and activity type other than from BSEG
We want the Internal order and activity type fields. From BSEG, it is taking a long time, and it hangs.
Is there any other table we can get these values from?
Our query is this:
select bukrs "Company code
gjahr "Fiscal year
belnr "Document no.
buzei "Document Item no.
aufnr "Internal order
lstar "Activity type
from bseg
into table gt_add_info
for all entries in gt_gl_detail
where bukrs = gt_gl_detail-rbukrs"Comcode from G/L acct detail
and buzei = gt_gl_detail-buzei "Doc item no. from G/L acct detail
and belnr = gt_gl_detail-belnr "Doc no. G/L acct detail
and gjahr = gt_gl_detail-gjahr."Fiscal yea
Can advise please how to make it faster. My internal table (GT_GL_DETAIL) has over 100000 records. ? thanks.I did a SQL trace, and saw that tables CSLA, CSSL, COKL and COKA are being hit with the values I entered inthe Activity type in transaction FB50.
Still not clear but where it gets stored. If in any of these tables, how do I get the object key? -
How to set activity type for a cost center
i was practicing the split valuation topic and for the that i was making a routing for a product so that i can have that product for inhouse production.
while using ca01(to create routing), i am facing a problem with the activity type.
when i am setting up the operation i am getting an error " activity type # is not set up for cost center 10004220 in year 2007"
can you please tell me how should i come out of it.
thankyou very muchhi Nandha, i am sorry but i could not do it. i am new in this. let me make my problem more clear to you.
i was creating a routing using ca01
after puttig all the details i switched to operations tab and in operation tab i put workcenter as (1111 - lathe, may be i am wrong as i told you i am just practicing).
i did not put anything on that screen and then when i pressed enter it took me to another screen with name Operation check.
here is the layout of the problem on that screen
std val unit activity type efficiency
set up min 1422
machine min 1421
labor min 1420
and then curser being on the std value i am getting this error "activity type 1422 is not set up for cost center 1000 4220 in the year 2007.when i am ignoring it it is switching to next std val coloumn and the same error.
thankyou for your time -
Hi,
I am running BPA on My Exchange 2010 VM (Server 2008 R2 VM on Hyper-V) and get the following errors:
The 'Services' string type value located in 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v14\Setup\Services' registry key is missing or inaccessible. The Microsoft Exchange Information Store service won't start. As a result, all services that depend
on this service won't be able to start
Exchange server [Exchange Server FQDN] is a virtual machine but the additional tools are not installed. This configuration is not supported. Install Virtual Machine Additions for this guest.
Problem is that, for the first, that Key exists and the service is actually running fine. And for the second my VM tools are already installed.
Hopefully someone out there has had the same issue and can assist.
PeteHi Pete,
For the first error message, please try the following steps:
Make sure the Information Store service is in Starting status,
Automatic startup type and works well, as a test we can try to
restart the Infroamtion Store service and verify the service works well.
Start
Registry Editor, find the registry key “Services” under “HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v14\Setup”, its value is “C:\Program
files\Microsoft\Exchange Server\v14”(default install location), please check your registry, make sure the key “Services” exist and value is the Exchange Server install location and the
location is accessible;
Start
Registry Editor, and locate the following registry key:
HKEY_LOCAL_MACHINE\Software\Microsoft\Exchange\Setup
Use the
Permission option under the Security tab to check the permission setting on this key. Make sure
System is in the list with Full Control permissions if the service account is Local System. If you are not using Local System as the service account, check the existence of the corresponding account in the list and ensure that
it has Full Control permissions. Please refer to this article:
Title: Exchange Store Does Not Start: Errors 7024, 1026, 9542, and 5000
Link:
http://support.microsoft.com/kb/285116
Start
ADSI Edit, and then browse to the following location:
Domain.com/Configuration/Services/Microsoft Exchange/Org/Administrative Groups/AdminGroup/Servers/Server Name
Right-click the
server name, and then click Properties.
Click the
Security tab, make sure this own server’s server object have
full control permission on its own server.
If not or the object is missing, please modify the permission or click
Add, locate the computer account for the Exchange Server computer, add it to the Permissions list with full control.
Click OK, and then close ADSI Edit.
Use
Active Directory Users and Computers to add the current affected
Exchange Server computer account to the Exchange Servers(previous version should be “Exchange Domain Servers”) group in the
Microsoft Exchange Security Groups( or Users) OU. Refer to this article:
http://support.microsoft.com/kb/297295.
Restart the Exchange Server computer, then rerun the ExBPA.
For the second error message, Microsoft don’t recommend to install Exchange Server on virtual machine without additional tools, so the error message occurs. We can just ignore
this message, it will not affect the Exchange servers.
Regards, Eric Zou -
I'm hoping someone has any ideas if CA85N can really MASS change activity types. I have been testing the transaction in our test client and have entered the material, plant, work center in the selection criteria and then in the change tab I have entered the new activity type and click the copy button.
However, the system keeps giving me errors that there isn't an activity type for standard value for setup. But I'm not changing setup, I'm trying to change labor.
I also get another error "consistency check is not successful when changing operation 0004. But for this one material I'm not changing operation 0004. I'm changing operation 0030.Hi,
Activity Type will for a Work Center and not for the Standard Value Key. Hence when you are trying to change the activity type system will try to modify for the standard values for Setup / Operation / Labour etc. In your case I think you have not entered any activity type for the Setup, hence it is showing that error.
I suggest you to go tcode : CR02/CR03 and check in the costing tab whether you have maintained the activity type for Setup or not.
Hopw this will help you.
regards
radhak mk -
Activity types needs to be synchronised form CRM to MSA.
Hi,
We have a requirement in which the some of the activity types needs to be synchronised form CRM to MSA.
So for that I've added up a new Potential Criteria Field [Segment Field name - PROC_TYPE from the table SMOVBKA] for the Replication object ACTIVITY_OBJECT.
Then I created a new publication that refers to this replication object.
Finally while creating a Subscription with this publication I'm not able to place the filter in the criteria values for the activity types.
Kindly help me out at the earliest in explaning how I can place the filter so that I can filter out only the needed Activity types
Regards,
Rasmi.Hi Kai,
Thanks for your reply.
As I've already said, I've created a new Potential Criteria Field(PROC_TYPE) for the Replication Object - ACTIVITY_OBJECT. Then I created a new Publication (Activity(by Types)) and assigned that particular replication object to it. Finally while creating the subscription I need to place a filter for the Activity Types which in turn gets its value from PROC_TYPE of table SMOVBKA. When i tried to give the Segment Field Name(PROC_TYPE) as the filter criteria in the subcription,i'm not able to determine the values for it.Even if I try to give a value in the criteria part(ZACC - Call), the publication itself gets vanished.
Thanks for your understanding.
Regards,
Rasmi. -
Activity Type set up for cost center
Hi All ,
While creating a task list i m getting a message
Activity type is not set up for cost center in the year 2008
Message no. CR062
How could i set the activity type for cost center? Plz tell the procedure.
regards
sunil
Edited by: sunil gupta on Sep 19, 2008 10:12 AMDear Sunil,
Check out this,
1.Create a Cost center using T code - KS01.
2.Create an activity type using T code - KL01.
3.Assign the Rates for an activity type & cost center combination using T code KP26.
4.In the input screen of T code KP26 ,enter version as 0, from period 1 and to period as 12 and the Fiscal
Year as 2008,enter the cost center, activity type click on overview screen (F5)---> enter the per hour Rate
under Fixed price and set value as 2 for distribution key and plan price indicator as 3.
5.After performing this ,while creating the work center ,this combination of activity type & cost center
should be assigned.Then while creating routing/task list this work center can assigned for performing
operations.
Check with this & revert back if you need any further help.
Regards
Mangalraj.S -
Pls advice a Activity type price report to get full fiscal years ( 12 period ) activity prices at one for all the activity type.
We need of doing the comparison but in KSBT it gives only one period value at once.
ThanxHi,
Execute the following report
S_ALR_87013646 - Activity Types: Period Breakdown
Regards
Balaji
Maybe you are looking for
-
My Macbook Air connects to ATV at home but not at work
My Macbook Air connects at home over a Time Machine network to my apple tv just fine (including airplay); when at work on a non-apple wifi network both computer and apple tv connect but cannot see each other. As I would like to stream video to the w
-
Multiple Convert/Dump and Load tasks in a single SSIS package?
I'd appreciate some input. We have a single data file that has about 1,000,000 rows of data spanning 28 time periods in the columns across each row. The file is too large to import at one time, and so we have created 9 different transformation files
-
How do I set a calendar reminder for the first Tuesday of every month?
I have recurring meetings that happen on different dates. i.e. 1st Tuesday, 2nd Monday etc. Is there a way to set this up in the calendar? Thanks, -Mark- IPhone 4 IOS5 Sync to Outlook and Gmail
-
I have been getting notifications of a new release of Firefox. I think I've been on the beta test user list and I don't want to be on that list anymore. I'm not active enough to be of any use to you folks. Thanks for a great product.
-
Time Machine and Lexar SSD - how to use it?
I have Lexar SSD - 16 Gig version, it's formated with MacOS Extended (Journaled) filesystem, so it should work, right? No, it doesn't. Time Machine displays nothing in target drive window - it's completely empty, no sign of SSD whatsoever... What sho