Activity usage directoryd showing more than 150% usage

I am having mac air mid 2013,My activity monitor showing directoryd usage more than 150% ang mac is getting very hot.Please advice how to fix it,

This issue seems to be caused by a bug in OS X 10.9.5 that affects Macs bound to an Active Directory domain.
See this discussion for a possible fix, which has apparently worked for some.
ASC member bmiller-tam reports that he solved the problem by unbinding from AD, then running the combo updater, and finally rebinding. I can't confirm.

Similar Messages

I have an iphone 4 8gig there is 2.4 gig of "other" showing on my usage which is more than all oter data on the phone. What is it and how do I delete some to clear space?

I have an iphone 4 8gig there is 2.4 gig of "other" showing on my usage which is more than all other data on the phone. What is it and how do I delete some to clear space?

Sorry. We can't help you. It's no longer an iPhone. Apple won't touch it.
Take it to whoever replaced the screen and see if they can help you.
iPhones are not user servicable and Apple does not sell iPhone parts at all. I'd be surprised if you were actually able to back it up at this point. It sounds like it's completely borked.

PDFs are not shown correctly at more than 150% size

Hi,
we use Adobe Reader 8.1.2 and we can´t change it in our company.
we now have the problems, that a few documents are not shown correctly, when they are shown with more than 150% on the screen.
at 150% the signature and some lines are shown, when we look at the document witz 177% the lines and the signatures disappear.
Does someone have the same problem AND a solution?
Hajo

Hi,
I'm having exactly the same problem with my 80gb ipod on my new laptop which is also running Windows 7 64 bit and iTunes 10.1.1.4.
I initially just tried syncing photos and according to iTunes it was still syncing after 4 hours, this was for 6700 photos and I wasn't asking for full resolution, but iPod just said Connected - Eject before disconnecting. I couldn't disconnect and in the end had to close iTunes before disconnecting, then there were no photos on the iPod.
Disconnected, rebooted then when I connected the iPod I got the message that it was synced to another PC which I expected so i click to erase and synch, iPod initially showed synching then went to Connected - eject message but itunes was saying "finishing synch" it showed this for hours and out of 6543 songs on the PC it was onlt showing 6002 on iPod. I stopped the synch trie dejecting but got same message Iancenaz got. Again had to close iTunes before I could disconnect iPod safely.
I'm going to try synching it back on mhy old laptop which is running Windows XP and an older version of iTunes as I suspect its either a Windows 7 or iTunes 10 problem.

Want to record with two mics but don't want to spend more than $150...

Hey everyone.
I want to do shows with my sister and I want to use two mics. Or do I need to use two mics? I
We tried using my one Logitec Desktop usb mic but her voice was very low.
I don't want to spend more than $150.. my current setup:
1.42 GHz Power PC G4 eMac
two Logitech USB Desktop mics
GarageBand 3
That's it.
I tried Line In and Soundflower to do this a while ago and got this awful reverb effect.
Any tips and help are appreciated.
Denise
The Home Spa Goddess Show
All the latest and greatest bath, body and beauty news!
Previously On Alias...
The Podcast Devoted To All Things Alias
The GoddessCast Station
TV talk with the Home Spa Goddess - Now featuring reviews and talk about "24"

For my podcast (the Weekly Anime Review) I use a MXL 990 condenser microphone and a Behringer UB802 mixer. I recently got a second mic, and I couldn't be happier with this setup. Musiciansfriend.com has the mixer and the mic for $49.99 each. They also have free shipping for orders over $100. Don't forget to get a couple mic cables too, the MF branded ones work great and they are only $3.99 for a 20 foot cable.
Check out my podcast at www.weeklyanimereview.com to hear how this set-up sounds. I've been using it since the beginning, and I'm extremely happy with the audio quality. Hope this helps!
Aaron

How to show more than one record at a form-like style report?

Hi All,
I developed a form-like style report
I want it to show more than one record at once (At the same page)
I tried that by setting the value to "Maximum records per page" property for the repeating frame to 10
but when I close the property palete and open it agian the value is returned to 1 !!!
how to show more than one record at the same page?????
Thank u

Hi,
there's perhaps another property like "page protect". If than 2 records didn't fit at one page there's a page break. Or is there any object inside the repeating frame with page-break properties? Sorry .. it's like looking into a chrystal ball ...
Regards
Rainer

Finding of materials in scheduling agreement with more than 150 lines

Dear Experts,
we are in need to find materials in scheduling agreement with more than 150 lines. In standard SAP, materials can be searched only based on item Nos. is there a way we can search by material in ME38. also we noticed that find icon is greyed out in ME38.
Please suggest.
One more request is, to create an uplaod program for maintaining delivery schedules for multiple SAs.
please sugegst if this is feasible.
Regards
Raghavendra MS
9886138875

I am also curious if anyone has found a solution to this problem.
We routinely have scheduling agreements that are hundreds of line items. Users find it difficult to find the line item they wish to work with. It would be helpful if we could search by material number or sort the line items by material.
As Raghavendra mentioned (ctrl+F) functionality is not available in ME33L or ME38.
Thanks.

I have a new iPhone 6 plus and all is OK. But the mail shows more than 400 'unread' messages whereas there are none in the mailbox or trash or anywhere else I have looked. I can send and receive with no problem. I'm sure I have no unread messages.

I have a new iPhone 6 plus and all is OK. But the mail shows more than 400 'unread' messages whereas there are none in the mailbox or trash or anywhere else I have looked. I can send and receive with no problem. I'm sure I have no unread messages.

jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport

Can SharePoint calendar show more than 3 items on a Day's schedule in Month view? How?

Hi there,
Can SharePoint calendar show more than 3 items on a Day's schedule in Month view? How?
Thank you so much.

Hi,
From your description, my understanding is that you want to expand all items if a Day’s schedule has more than 3 items.
You could accomplish your requirement with jQuery to auto expand all items when you load month view, please refer to this article:
Auto Expand Month View on SharePoint 2013 Calendar
http://blog.eastridge.net/auto-expand-month-view-on-sharepoint-2013-calendar
If I misunderstand your requirement, please provide more detailed information.
Best Regards,
Vincent Han
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to show more than one report in a same Viewer or Form

Dear all,
I have develop many reports with CrystaReport XI and I'm using the CrystalReportViewer to show each of them in VB6. My Question is: Can I show more than one report in a same Viewer? if i need to show the report1.rpt and report2.rpt in a same window how can I do it?
Sérgio Salazar - Brazilian VB developer

No and Please re-post if this is still an issue to the Legacy Application Development SDKs Forum or purchase a case and have a dedicated support engineer work with you directly

How to show more than one report in a same Form

Dear all,
I have develop many reports with CrystaReport XI and I'm using the CrystalReportViewer to show each of them in VB6. My Question is: Can I show more than one report in a Viewer? if i need to show the report1.rpt and report2.rpt in a same window how can I do it?
Sérgio Salazar - Brazilian VB developer

I once had a project which involved alot of reports and on my mind I had the same idea; to display all reports with only one crviewer but was not able to. Instead what Idid was to create say 10 forms with a viewer on each and if the user wanted to produce extra reports, they had to close some of them. This worked out for me.

Exchange rate difference account is showing more than invoice or advance am

Hi,
Exchange rate difference account is showing more than invoice or advance amount (USD V/S INR)
1) we have done down payment of customer. (USD V/S INR RS. 40/- PER DOLLAR)
2) Invoice posting also done (RS. 42/-)
3) At the time of Invoice against down payment clearing (RS. 43/-)
     At the time of clearing exchange rate difference account is generated automatically (back ground calculated).
     But exchange rate differemce account is displaying amount is more value. This value is more than invoice and advance value.
     But question is how this much of value is getting in exchange rate difference account.
     Please suggest possible ways to get that.
Regards
Srinivas Gundala

Hello
There is a SAP note 357758. Please refer the same and also contact SAP OSS.
Rgds

Can't open more than 150 files in camera raw?

I have been trying to open multiple files from the bridge into the raw program for cs3...but if I try for more than 150 or so at once, it tells me the request can not be completed because too many files were selected for opening? I was able to open hundreds at a time with cs2's version of raw and bridge, so why can't I do this now? Any suggestions would be greatly appreciated! Thanks!

Open Bridge CS3, select an image (or group of images), right-click (or control-click) and select "Open in Camera Raw..." from the popup menu.

More than 150 data fields

hi
can anyone please help me?
i have a table plan in which i have more than 150 fields. i am using HTMLDB to develop this application. i have 4 pages
1. plan (2 items)
2.targets(20 items)
3.rates(ore than 100 items)
4.bonus(more than 50 items)
when am inserting all the data without missing any one of the field in all the pages, it does't insert all the data(for ex in rates page,rate1 and rate2 information was inserted into the database table,but rate3 information,rate 4 information was not inserted and some of the item in the rate 5 information was inserted).
when am inserting limited fields(for ex. only rate3 information instead of giving rate1,rate2, that time the rate3 information was inserted).... is there any limits for the items in a page? please any one give me the solution?
thanks in advance
regards
vally.s

You can use any setting you'd like in compressor.
But it might not fit on a standard single layer DVD. I can about guarantee that.

Not uploading more than 150 rows from Excel file to Internal table.

Hi All,
We have a Z program to upload initial stock from excel file to SAP using BAPI. The problem is we have defined row to '65536'. But it is not uploading more than 150 rows at a time. The piece of code is given below.
DATA : it_excel LIKE alsmex_tabline OCCURS 0 WITH HEADER LINE.
DATA: xcel TYPE TABLE OF alsmex_tabline WITH HEADER LINE.
DATA : gd_scol   TYPE i VALUE '1',
       gd_srow   TYPE i VALUE '3',
       gd_ecol   TYPE i VALUE '256',
       gd_erow   TYPE i VALUE '65536'.
PERFORM upload_excel_file TABLES   gt_out
                              USING   p_file
                                      gd_scol
                                      gd_srow
                                      gd_ecol
                                      gd_erow.
FORM upload_excel_file TABLES   gt_out
                                   "Insert correct name for <...>
                        USING    p_p_file
                                 p_gd_scol
                                 p_gd_srow
                                 p_gd_ecol
                                 p_gd_erow.
DATA : lt_intern TYPE kcde_cells OCCURS 0 WITH HEADER LINE.
DATA : ld_index TYPE i.
FIELD-SYMBOLS: <fs> TYPE ANY.
CALL FUNCTION 'KCD_EXCEL_OLE_TO_INT_CONVERT'
    EXPORTING
      filename    = p_p_file
      i_begin_col = p_gd_scol
      i_begin_row = p_gd_srow
      i_end_col   = p_gd_ecol
      i_end_row   = p_gd_erow
    TABLES
      intern      = lt_intern[].
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF lt_intern[] IS INITIAL.
    FORMAT COLOR COL_BACKGROUND INTENSIFIED.
    WRITE:/ 'No Data Uploaded'.
    EXIT.
ELSE.
    SORT lt_intern BY row col.
    LOOP AT lt_intern.
      MOVE lt_intern-col TO ld_index.
      ASSIGN COMPONENT ld_index OF STRUCTURE gt_out TO <fs>.
      MOVE lt_intern-value TO <fs>.
      AT END OF row.
        APPEND gt_out.
        CLEAR gt_out.
      ENDAT.
    ENDLOOP.
ENDIF.
ENDFORM.
Plz tell me, what is the problem here. I want to upload all the rows at a time.
Thanks,
With regards,
Rosaline.

Hi Rob, I confirm, you're nitpicking! :-D For information, I've noted a few SAP comments about releasing and released objects, for people who like reading: [SAP Library - Documenting and Releasing a Function Module|http://help.sap.com/saphelp_nw70/helpdata/en/d1/801f50454211d189710000e8322d00/frameset.htm], [Note 109533 - Use of SAP function modules|https://service.sap.com/sap/support/notes/109533], [Note 415983 - Modification/customer developments of SAP function modules|https://service.sap.com/sap/support/notes/415983]; Example of an unreleased BAPI -> [Note 577453 - Using BAPI BAPI_DELIVERYPROCESSING_EXEC|https://service.sap.com/sap/support/notes/577453]
Sandra

Show more than 10 points in iOS Maps Api?

Does someone know how i can show more than 10 points in the iOS Maps Api?
I am searching for some shop´s in the user´s location. 10 points are not enough.
Has somebody an idea?

Does this have anything to do with Adobe Air?

Activity usage directoryd showing more than 150% usage

Similar Messages

Maybe you are looking for