Activity with Products

Hi Guys,
I have a scenario where I need to use activity with Products. I looked at the standar transaction 'Business activity with products' but I do not see any tab page to enter products.
Can anyone assist me on how to use/create an activity with products?
Ani

Hi Ani,
First create activity journal template type from easy access using wizard.
Second maintain activity journal template from template type in easy access using wizard.
Third in IMG for activity item provide item category determination.
Finally open your transcation type with category you will find tab "Activity Journal" maintain product data in this tab.
regards
satish kumar

Similar Messages

Create business activity with products

Hi,
I am Trying to create a business activity with products. Adding Activity Journals TAB in the activity u201CBus Act.:With Prodsu201D. The issue is that when I am trying to make a Journal template type in (CRMM_JOURNAL : Define Activity Journals) I am not getting my own transaction type under Transaction Type option (I have copied my own transaction type from the standard u201CBus Act:With Prodsu201D activity). I only get the standard activity type (0020 :Bus Act.:With Prods) in my drop down box. (attached is the screen shot)
Any ideas
I am using SAP CRM 5.0.

Hi,
first your transaction type has to be active.
Next, you need to assign item categories ACT0, ACT1 and ACT in SPRO, in order to use activity journals.
All three.
Regards

HT201210 nowadays have many user have problem with update to ios7 and need active with apple id maybe in the future in order escape from these problems must be stop use these products else. Because of simple user don't know about this technology and somet

nowadays have many user have problem with update to ios7 and need active with apple id maybe in the future in order escape from these problems must be stop use these products else. Because of simple user don't know about this technology and sometime just hear from other user that it 's difficult to use then force they change phone that use to handle to another.

It is a feature to discourage the theft of iPhones by making them useless if resold. It's not going anywhere. It's simple: just don't buy a phone until you make sure that the activation lock has been disabled.

My subscribe is end, but i have more dvd with products (Windows 8.1), but not all i wrote my active key

Hello,
my subscribe MSDN is ended.
But i got more dvd (Windows 8) with products, when my subscribe was good.
How i can active products with my dvd.
I have some products key, but not all.

Help
with managing my MSDN subscription
Help with MSDN Subscriptions
S.Sengupta, Windows Entertainment and Connected Home MVP

Wrong with activation key product for windows 7

Hello everyone
I have downloaded windows 7 from my college website (Microsoft Windows 7 with Service Pack 1 Debug/Checked
Build 32-bit (English) - DreamSpark )
then I chose windows 7 home basic during installation
finally every time I try to active windows 7 it says "the product key
you entered wont work with this edition of windows 7 you must either run windows 7 setup or enter a windows home basic product key"
do I picked a wrong version in the installation of windows 7 ? whats the matter ? my windows got three more days to be activated and I dont know what to do, there wasn't any description on
my college website on how to active
please help me ASAP !
Regards

You picked the wrong version Othman92. The Checked/Debug build is intended only for very specific uses like windows driver development. See this page for more infO: http://msdn.microsoft.com/en-us/library/windows/hardware/ff543450(v=vs.85).aspx
Thanks,
Mike
Unfortunately your post is off topic here, in the MSDN Subscriptions feedback forum, because it is not feedback regarding the MSDN Subscription. This is a standard response I’ve written up in advance to help many people (thousands, really.) who
happen to post their question in my forum, but please don’t ignore it. The links provided below I’ve collected to help with many issues we’ve seen.
For technical issues with Microsoft products that you would run into as an end user of those products, one great source of info and help is
http://answers.microsoft.com, which has sections for Windows, Hotmail, Office, IE, and other products. Office related forums are also here:
http://office.microsoft.com/en-us/support/contact-us-FX103894077.aspx
For Technical issues with Microsoft products that you might have as an IT professional (like more technical installation issues, or other IT issues), you should head to the TechNet Discussion forums at
http://social.technet.microsoft.com/forums/en-us, and search for your product name.
For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), you should head to the MSDN discussion forums at
http://social.msdn.microsoft.com/forums/en-us, and search for your product or issue.
If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here:
http://community.dynamics.com/
If you really think your issue is related to the MSDN Subscription, and I screwed up, I apologize! Please repost your question to the discussion forum and include much more detail about your problem, that could include screenshots of the issue
(do not include subscription information or product keys in your screenshots!), and/or links to the problem you’re seeing.
If you really have no idea where to post this question, then you shouldn’t have posted here, because we have a forum just for you! It’s called the ‘Where is the forum for…?’ forum and its here:
http://social.msdn.microsoft.com/forums/en-us/whatforum/
Please review the topic of the forum you’re posting in before posting your question. Moving your post to the off topic forum.
Thanks, Mike
MSDN and TechNet Subscriptions Support <br/> Read the Subscriptions <a href="http://blogs.msdn.com/msdnsubscriptions">Blog! </a>

Valuation with material cost estimate: error with product "117122"

Hi people,
We have the error:
=====================
Valuation with material cost estimate: error with product "117122"
Diagnosis
In Profitability Analysis (CO-PA), the system tried to valuate a line item using the current standard cost estimate.
In order to determine the current plan period, the system needs to read the valuation segment of the material master.
The system has found that the current plan period is not filled forproduct "117122" in plant "UBE1".
We have the follow configuration in trans.: KE40:
. Determine material cost estimate
   . Transf. Standard Cost Estimate
. Costing Variant
. Control Data for Standard Cost Estimate
   . Period Indicator = "Current Standard Cost Estimate acc. to entry in mat master
. Addiitonal data CO-PC
    . Transfer cost estimate in controlling area currency "activated"
We think the reason about our error is because the field above is activated and some configuration more is necessary for this case. For examplo: Trans.: OKYW and this one was not configurated yet.
Do you know what happend?
If we need to configure some transation, or sonly process the cost estimate?
Thanks,
Rosana.

Hello Guido
Thank you very much for your return.
It is happenning in a Client that some people are doing the configuration.
Before we didin't have in KE40, the fiel "Transfer cost estimate in controlling area currency" activated.
And now, the people activate that in this new Client and I don't know the impact about that.
I think we have to make the configuration in OKYW.
The other transation you told me, we don't have any information.
Could you tell me some other idea what happend?
Message error is just "Message no. KE350"
Abou claculate the cost:
It was calculated by trans.: CK11N for future planning and the real wasn't not possible to release because this material already have moviments.
Could you tell us is there is some thing more to do?
Thanks,
Rosana.

InDesign 5.0 tools/panels not activated with mouseover/mouseclick

The following summarizes the hardware, software, procedures and results in my attempt to resolve issues with InDesign 5.0. Suggestions would be appreciated. Thanks!
System:
HP EliteBook 8540W
Intel Core i7 CPU Q820 @ 1.73GHz 1.73 GHz
8 GB
64-bit Operating System
Pen Input Available
Wacom Intuos4 pen and mouse
Adobe Products:
Adobe Creative Suite 5 Master Collection, Version 5.0
Acrobat 9.4.6
Procedure:
The computer system control panel > program uninstall was used to clear all Adobe products except Acrobat, AIR, Flash Player and Media Player. The Adobe CS5 Cleaner Tool for Windows was installed and run at Clean All to remove all products and installer-related files for the Creative Suite 5.0.
The Creative Suite 5.0 was re-installed on the HP cpu using the registered program discs.
The Adobe 7_0_4 InDesign Patch-All was downloaded from Adobe and installed.
Result:
Tools Panel: Selection Tool and Direct Selection Tool will not highlight with mouseover nor activate with mouseclick.
Layers Panel: Can't click-on Layer Name to activate that Layer; individual Layer Names can't be double-clicked to rename; visability can't be toggled with mouseclick; the Create New Layer icon at bottom of panel can't be activated with a mouseclick; a New Layer can be created from the Panel upper dropdown menu; Panels location can be moved, panels opened/closed, and collapsed with mouseclick.
Character Panel: None of the Character styling dropdowns within the panel can be activated; Character styling options can be activated from the upper right panel options triangle dropdown, and they can be activated from the Application Bar: Type > Font and Type > Size. In the Type > Font flyout panel displaying all fonts, the mouse wheel will not scroll through the fonts.
Paragraph Panel: Can't click on paragraph alignment option icons.
Links Panel: In Pre-flight, can't activate link list item with mouseclick.
Stroke/Color/Swatch Panels: Can't activate any tools within these panels with mouse.

Peter,
Thank you very much. I re-set DPI to default, rebooted, and the issues I was experiencing with InDesign were gone.
Brad

Global ATP with product allocations and SD returns

Dear all,
We have been setting up an implementation scenario with an ECC 6.0 and SCM 5.0 system which verifies SD orders versus SCM product allocations.
With SD orders and SD contracts everything works fine. But we have a problem with using SD returns (same material and plant used like the SD orders): We would expect the system also to check the returns for product allocation quantities but it seems that the SCM availability check does not enter the product allocation procedure at all (we have some user-exits in use but these are only accessed when we go via SD orders, no access at all for SD returns).
Is there any special setting which we have to activate in order to have the SD returns properly processed with product allocations? (Customizing "Set the Transfer of Returns to SAP APO" within ECC is activated) The system somewhere gets stuck during the check within the SCM system.
Thanks for providing assistance regarding this matter.
Kind regards,
Klemens

Hi folks, did you resolve your issue here? I assume what you are wanting is for the Returns order to free up allocations qtys that had previously been consumed by the originating sales order, that is, incoming orders qty should be reduced by the amount of the returns order. I know that when a sales order line item is rejected the incoming order qty is reduced, but I'm not sure it is possible for a returns order to do this.
ATP Man, are you saying that as category BZ is not supported by Allocations that it is therefore not possible for the Incoming Orders Qty to be reduced by a Returns Order? I have a business reequirement to do exactly that.
If it is not possible to do this through the automatically via the ATP check, the only way I can think to address this, would be to try and transfer the Returns qty to SCM after the order is saved and then to have a macro that reads the returns qty and reduces the Incoming Orders qty by the qty of the return.
Paul.

I bought adobe CS6 design standard (CD) last year in the month of july and didn't active my product yet. I bought in from the University of Washington, Seattle store on a student and teacher licensing. I am a Mac user and I don't have cd drive in my compu

I bought adobe CS6 design standard (CD) last year in the month of july and didn't active my product yet. I bought in from the University of Washington, Seattle store on a student and teacher licensing. I have the product code with me. I am a Mac user and I don't have cd drive in my computer and I am indeed to get this product activated now. How can I install this without cd drive? Anyone please help me with this issue?

You may download the product from
http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

Bus.Activity with Prod. - address tab

Hi CRM experts,
i copied the 0020-Bus Act with Prod to my Z type tranx and found that Address tab is missing. Does any one know where in IMG we need to set for Z type trnx to get the address tab in our customize transaction also.
Thanks
chap

Hello,
The activity management deals with BUSINESS ACTIVITY and TASK.
Here Business Activity means is PUBLIC and TASK is PRIVATE.
The difference between BA and TASK is involvment of Business Partner.
You won't find any PRODUCT/ITEM related ASSIGNMENT block for this TXN Categoery.
Bcz process wise we say that activity doesn't deals with PRODUCT/ITEM.
That is why you can unable to see ASSIGNEMENT BLOCK.

Activity with "(re-uese)" postfixed to name in an Activity Diagram

I am creating a new activity diagram and trying to including a pre-existing activity. This activity is currently not used in any other diagrams. (I had created a diagram and later deleted it. All the activities still stayed in the "Application Sources" under the package.)
This occurs when I do drag and drop from the "Application Sources" into the diagram. It also happens when I right-click and use "Add to diagram".
How do I include the activity without having the "(re-use)" postfixed to its name in the activity diagram?
The only way I can find to not have the "(re-use)" is to delete the activity and recreate it from scratch. Is there an easier way?
I am using version 10.1.3.0.2.223 on Windows XP.
Mike

Mike,
Although I have reproduced this issue in 10.1.3 Production as well I would recommend moving up to the latest version rather than working off a Preview from 2 years ago as we have made many improvements to the overall look and feel of both JDeveloper and the Modelers.
To workaround the issue, remove the Activity with the '(reuse)' after it from the current diagram and save and close JDeveloper. In a text editor open up the Activity file ('xxx.oxm_act'), you should find a line like:
<cid name="CONTAINER_REFERENCE" key="<Some Text>" />
Replace the above line with:
<null name="CONTAINER_REFERENCE" />
and save the file. Reopen JDev and include the Activity back on the Diagram, it should no longer say '(Reuse)' after it.
Regards,
Lisa
JDev UML QA

Activity with Activity Journal vs. Complaint

We are looking at implementing a process to record when our customers call in with product issues. Can someone please tell me if it is better to use the Activity transaction with the activity journal for products or use the Compalaint transaction? What is the benefit for each?

Hi,
I guess that using activity journals there is a much better integration to BI - how many customers did have problems with which products.
But using complaints this would be the "normal" way. This is a standard service process which supports follow-up processing like credit memo or service orders for replacing respectively repairing objects.
Also in activity journals there you don't have any FI-CO integration which you will have for complaints.
Regards,
Wolfhard

Is AppleCare (Education) can be activated with normal purchased macbook?

Hi,
I bought my macbook pro retina 15" about 11 months ago (as normal customer) and I want to activate AppleCare for it.
Few hours ago, I purchased AppleCare Protection Plan, but as now I am a student in sweden, I purchased it as educational product. Later on, I heard from someone that it can't be activated with my macbook pro because when I bought it it wasn't as educational product and this AppleCare Protection Plan is for education macbook pro !
is it true, if so can I return it? I have purchased it today afternoon swedish time.
Thanks

We are users like yourself, not Apple employees.
You will need to find a contact here, Khaled
http://www.apple.com/se/contact/
For example, here
Handla för utbildningssektorn
Om du är student eller lärare ska du besöka sidan om Apple Store for Education eller ringa vår kundtjänst på telefonnummer 020‑120 99 71. Du kan ringa måndag-fredag 09.00 - 19.00.

Create PIR with Production Version

Dears ,
Can I Create PIR with Production Version Specific
Best Regards
Rami

Hy Rami,
Yes you can select required Prod. Version With PIR itself.
To do the same follow below Path,
MD61/MD62 --- > Go to Schd. Line Tab ---> Go to Settings Menu --->
Production version.
After pressing that Tab for Prd. Version you will find Column for Prod. version gets Activated and there you can select your required Prd. Version.
System will explod the BOM and Recipe as per that Selected Prod. Version during MRP run.
Regards,
Dhaval

Different behaviour between activity "Change Production" and web-service

Hello!
We are using SAP ME 5.2.6.1 (SP06 Patch 1) - the newest version of SAP ME 5.2
In activity "Change Production" (SU540) it is possible to change shop order, material and router of SFC's.
This also works for SFC's in status DONE if the following activity rule is set
ALLOW_DONE_SFCS = TRUE.
Nevertheless if the same is tried via "Production XML" or with the given web service an error is displayed
and the operation is not performed.
When using "Production XML" the following error is shown:
Cannot change Done SFCs (Message 15050)
When using the web service (http://<host>:<port>/manufacturing-services/ProductionServiceService)
the same error occurs. I think the web service is the prefered way in the future.
For me it seems that only with the GUI activity SU540 the rule "ALLOW_DONE_SFCS = TRUE" is effective.
But should the behaviour not be identical regardless if this was initiated from the GUI or from the web service?
So is this something like a bug or is it "behaviour by design"?
If the latter is the case:
Is there a workaround possible to achieve the same outcome via webservice?
Kr,
            Erich Lind
Edited by: Erich Lind on Aug 5, 2011 10:37 AM

Hello!
From the SAP ME Transaction Log Report:
Concerning the "Production XML" interface - it uses the ChangeProduction EJB.
I assume the web service internally will do the same ...
class com.sap.me.frame.BasicBOBeanException message: com.sap.me.frame.BasicBOBeanException: Error 15050Cannot change Done SFCs (Message 15050)
     at com.sap.me.production.ChangeProductionSOBean.validateSFCList(ChangeProductionSOBean.java:1413)
     at com.sap.me.production.ChangeProductionSOBean.validateXMLProductionChanges(ChangeProductionSOBean.java:255)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:592)
     at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:46)
     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166)
     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19)
     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71)
     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38)
     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:22)
     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189)
     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16)
     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21)
     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16)
     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
     at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133)
     at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164)
     at $Proxy3489.validateXMLProductionChanges(Unknown Source)
     at com.sap.me.xchange.ProductionFacadeSOBean.processChangeProductionMessage(ProductionFacadeSOBean.java:997)

Activity with Products

Similar Messages

Maybe you are looking for