Actual Activities not appearing after Confirmation

Hi,
I got a situation where in we are using CO11 for confirmation.
We have 3 Activities in the Std Values viz, Machine, Labour and Actual Weight
After entering the Yield Qty and pressing Actual Data, Machine and Labour are appearing, but Actual Weight is not Appearing.
Necessary settings in OPK4 and OPK0 are already in place.
Please guide.
Thanks in advance,
Harris

Hi,
Thanks for the prompt response.
- System is calculating the Activities as required in the Production Order which i can see in the details information of the Operation.
- They are using CO11 for the confirmation.
- There is no Manual entry at the time of Confirmation.
- In OPK0 Default Confirmation Profile SAP001 is being ticked marked.
- Default Values , Qty and Service in OPK0
Procedural Steps for CO11:
- I run CO11
- Enter Production Order No. and give enter
- Here it shows the Yield Qty
- Then i press ACTUAL DATA icon and i get only the Machine and Labour Activity, but not the ACTUAL WEIGHT.
Procedural Steps for CO11N:
- i also tried running it in CO11n
- Here i enter the production order no. on the time ticket screen and give enter
- Here too only Machine and Labour is seen, Actual Weight is still missing.
- Then i once again hit ENTER and i am getting the Actual Weight Now.
- But as soon as i press Actual Data button, the Actual Weight disappears and the field appears Blank.
It is very strange, but this is the problem.
Please guide
Thanks and regards,
Harris
Edited by: Harris Panchal on Mar 12, 2010 3:19 PM

Similar Messages

HT1386 My iOS device (Ipad mini) only appears in iTunes while cable-connected, but does not appear after diconnect the cable. How can I Wifi sync ?

Hi, My iOS device (Ipad mini) only appears in iTunes while cable-connected, but does not appear after diconnect the cable. How can I Wifi sync ?
Documents say
Whenever the computer and the iOS device are on the same network, the iOS device will appear in iTunes, and you can sync it....
But I can't see my iPad Mini in iTunes.
And my Ipad (Settings, General, iTunes Wifi Sinc) shows a message :" Sync will resume when xxx(my PC with iTunes) is available "...
Both are in the same network,
Ipad mini is is plugged in to power
. iTunes is open on the computer
what can i Do ???

Hi Skydiver119, and tks for four interest.
I have done exactly as you say, but it does not work for me.
You indicated " Navigate to the info tab and scroll down. There'll be a check box for 'sync over wifi' or something to that effect. Check that box and sync to affirm your choice."
I navigated to Summary tab (not Info Tab) and checked "Sync with this ipad over Wi-Fi"
I disconnect the wire,
and my iPad disappears from my iTunes screen.
in my iPad ->Settings -> General -> iTunes Wi-Fi Sync -> says " Sync will resume when (my PC) is available.
So, I can not sync via wi-fi
I appreciate if you can help me.

E-Rec Reference Code in the Publication tab should not appear after enddate

hi,
There is a requirement from the client after the end date of the publication ,the reference code should not be displayed to the candidate in the Candidate page ,presently the same is manually done in the system by changing the status to withdrawn.
Is there any way by which we can automate the process by change in customising by which the reference code does not appear after the end date
Please provide a solution if something can be done in the standard setting or do we require any Zworkflow to be developed for the same.
Regards
RK

Hi RK,
this is nothing the standard supports.
But I would not use a workflow here. As this is a mass handling workflow is no good idea. This is a task for a customer periodical service. Just build a class implementing the periodical service interface which gets all released publications which have a publication end in the past and status released and change their status using the cl_hrrcf_posting_inst_bl. This should be done in a couple of hours. Add the customizing and the issue is solved.
A requirement in this context where a customer workflow is quite handy in my opinion is a customer workflow which closes all postings and withdraws released publications when you close the requisition. This reduces the steps a recruiter has to do and ensures that no candidate applies although you are already done with the requisition.
Kind Regards
Roman

Why MLB.TV is not appearing after the last update?

why MLB.TV is not appearing after the last update?

Make sure the store is set to the US.. Also restart the ATV.

Why new contacts are not appearing after some time?

I Am using iPhone6, iPad New and iPad mini. The contacts which I saved in iPhone are not appearing after some time. I don't know whether it is related with synchronisation of other devices. Please help me if you know the reason.

Hi,
Have you checked the filtering option in contacts? Open contact menu button > filter. Perhaps you have a filter hiding the contacts.
What are your thoughts about this forum? Let us know by doing this short survey.

The Facebook video chat icon is not appear after upgrading to mavericks X

The Facebook video chat icon is not appear after upgrading to mavericks X. Please help.

http://support.apple.com/kb/ht5404
Scroll down to the bottom, read and then perform the troubleshooting steps provided.

CRT results are not appearing after successful payroll run

CRT results are not appearing after successful run of US payroll, however, RT results are appearing.
Please suggest ideas to find the results of CRT.

Hi Rémi Corriveau,
Thank you for spending your time to answer my question.
Here are the answers to your questions . . . .
QUESTION: Did you run a Payroll Simulation or a live Payroll Calculation ?
ANSWER: We did a LIVE payroll run for a period of 3 months.
QUESTION: Did you use t-code pc_payresults ?
ANSWER: Yes, we used the t-code pc_payresults but still it doesn't show the CRT results.
QUESTION: Did you check Processing Class 30 and 70 for your WTs ?
ANSWER: As per the process, we copied the SAP standard (model) Wage Type M010 to
our customized Wage Type, hence, hope that it wouldn't disturb any of the standard SAP settings.
However, we did check the Processing Class 30, but did not check the processing class 70.
Shall update you once PC 70 is also checked.
Please educate, if there are any particular specifications that need to be entered while checking
for our WTs in PC 30 & PC 70.

Simple floating clock does not appear after shut down

Hi,
On my iMac oxs 10.9.4. my simple floating clock does not appear after shut down.
Can anybody tell me how to overcome this?
Cheers

And now I am at the stage it wont automatically start despite it being ticked in the Log In Items.
As Imp68 has asked, do you mean the "Hide" Checkbox is selected?
If you have checked the box, that says, to start the application, however, hide it so it is not visible when you start.
If you run Applications -> Utilities -> Activity Monitor, can you find Simple Floating Clock as a running app? (Activity Monitor has a Search box to make this easier).
Is Simple Floating Clock on your Menu bar?
Is Simple Floating Clock set to float?

My payment was not accepted after confirming it wa...

Skype send me a Mail my payment was not acepted after confirming It was ?
Post transferred from where added to create new topic;
subject/title edited accordingly.

Your account shows that your payment has now been accepted.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

SHCess field not appearing after using utilization tab in excise invoice

Dear All,
SHCess field not appearing after using utilization tab in excise invoice.The other fields and values releated to SHCess are appearing.
Please give the inputs.
Regards,
deepti

issue resolved

Network Activities update issue after confirmation

Dear,
In our PS projects we are using one network header (with backwards scheduling) with both internal (PS01) en cost activities (PS03). The cost activities are linked to two internal activities to establish a cost spread.
For example Cost activity 1 is linked to internal activity X and Y=
Cost activity 1 has a SS relationship with internal activity X
Cost activity 1 has a EE relationship with internal activity Y
=> as such the planned costs defined in the cost activity are spread over the planned period between internal activity X and Y
Now when you do a confirmation of a internal activity, e.g. X, then the planned dates of the cost activity are not updated with this actual dates of the linked internal activity
=> a

hi
after confirmation have you run the schedule project/network.

Crystal Report Viewer is not appearing after hosting on server

Dear Friends
I developed a web application in Visual Studio 2010, and my Database is SQL Server 2008 R2.
I created reports using Crystal Report 13 in Visual Studio and my Operating System is Windows 7 32-Bit.
All reports are running fine at my machine.
When I copied published folder into "wwwroot" folder and hosted, all reports are working Good.
Here i have my web application in "Default Web Sites" in IIS.
Then After I added a new website in IIS with a port No. and created a virtual folder and hosted my web application.
The application is running fine, But the problem is Reports are not appearing on Web Page.
I have created an toolbar to export the report. And when I am exporting the report to PDF, It is working well and reports are exported successfully.
I didn't understand why this is happening?
Is this a problem of port no. ?
or
Is this a problem of IIS?
or
Is this a problem of Browser?
or
Is this a problem with CrystalReportViewer?
or
something else?
In fact I have the folder for "C:\inetpub\wwwroot\aspnet_client\system_web\4_0_30319\crystalreportviewers13". for crystal reports.
Dear All kindly help me in this issue, it is disturbing me since 5 days.
All helps are appreciable.
Thank you.

Enter the following:
viewer blank net crystal
into the search box in the top right corner. You should get a number of hits (Kbases and articles) that should point you to a solution.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Contact name does not appear after upgrading to iOS 5

I recently upgraded to iOS 5 and after doing so, contact name does not appear when someone calls; but text messages the name appears. I have saved all my contacts under +9 format.

This indicates that the phone was carrier locked and had been 'hacked' to unlock it. Updating the phone has re-locked it to the original carrier.
ONLY the carrier it is locked to can authorize unlocking it. Not all do so. Contact the carrier and find out what their policy is.
If it's locked to AT&T, you may as well sell it and buy a new phone. AT&T will not unlock iPhones for any reason.

After installing Adobe Version X Pro, I still cannot "create" a PDF package from Excel since the Adobe add-in does not appear after installation. Can someone provide their inputs?

I'm having issues with getting the Adobe add-in to appear after installing Adobe Version X. Version XI works but it is not compatible with another software my company uses so we have to stick with Version X. Please help.

Make sure your Acrobat X is up to date. 10.0 will not do this, 10.1 is supposed to. Compatible web browsers and PDFMaker applications

Tree is not appearing after login

Hi,
We have created a tree in 0 page.So we are able to access the same tree in all pages. I am having around 10 pages in my application with one standard tabset.
Now my question is whenever i login for the first time tree is not appearing. If i navigate to another page thru tab then it's appearing. If i navigate to another page and come back to the earlier page then also it's appearing. Without navigation between the pages i am not able to see the tree.
My tree is based on temporary table. I am creating this table at application process level AFTER_AUTHENTICATION if this table is not present.
Then i am doing insertion of records in to this temp table at application process level after BEFORE_BOX_BODY.
My tree will be created based on this table.
This problem is coming only when i login in to the application.
Once i login and navigate to another page then tree is appearing.
Thanks in Advance...
Ramesh P.

Scott,
I have changed some properties like Display points in htmldb.oracle.com application as per my existing application.
Now it's not working. Can you see this application on htmldb.oracle.com and let me know your comments.
If i put Display point for Page 0 as "Page Template Region 1" then it's not appering for the first time.
If i use Display point as "Page Template Body(1)" then
It's appearing for the first time also. But it's displaying in the middle not at left side.
I am using Page template as "whitebg-two-level-tabs-sidebar"
Thanks,
Ramesh P.

Actual Activities not appearing after Confirmation

Similar Messages

Maybe you are looking for