Actual assessment cykles - How to transport Tranport?
Hi there,
I have created a couple of cost center assessment cycles (KSU1) in my development system. Is there any possibility in the system to TRANSPORT my new cycles into quality assurance system ( test system ), afterwards follow them to production and do not create the same cycles one time again???
Please advice ASAP ... many thanks
Marian
you can go to OKE6 and go to the actual postings tab and select the assessment and distribution and cycles and transport.
Assign points if helpful
Similar Messages
-
How to transport a deleted query?
I have deleted one query in developmeny system. I thought it will ask for tranport request.But it did not ask for any transport requast.Now it is deleted from development system.Please let me know how to transport this change in production?
Hi Saikat,
Was this query transported to the prod system, or created directlyin prod? If you have transported the query, you would not be able to delete without first assigning a transport request to the BEx dev class...check if there is any request assigned to the BEx dev class (RSA1 > transport connection)
Hope this helps... -
How to Transport LSMW to development server to Prodution server
Hi all,
I would like to know how we transport LSMW(project, sub-project, Object) from development server to Production server.
Thanks
Vipin NagpalHi Vipin,
Actually, it depends based upon the requirement. There are some advantages and disadvantages with both of the methods.
See the following documentation. I think this would be helpful for you and based upon your requirement you proceed further.
<b>Transport LSMW Projects</b>
The LSM Workbench provides data transport for a project via both the SAP transport system and down-/upload. (Excluded are the presettings for IDoc inbound processing. These presettings should be manually created in every SAP system and every client.)
<b>1. Generate Change Request</b>
Choosing this function creates an SAP change request containing all information about an LSMW project. This SAP change request can be exported / imported with the usual means of SAP correction and transporting. You can find this function in the initial screen under Extras -> Create change request.
When transporting LSMW data this way, you can trace the transports any time in SAP correction and transporting.
<b>Note 1</b>: When importing such a request, the complete project is deleted from the target system first. It is then created again.
<b>Note 2</b>: When exporting the transport request, all changes to the selected project made until the time of export are entered (not only until the time of creation of the transport request.)
<b>2. Export Project</b>
In the initial screen, select Extras  Export project. This first displays the structure tree of the selected project. Via Select / Deselect you can select whether the entire project or parts of the project are exported. Then select Export. The program then creates an ASCII file.
Note: The selected elements are exported together with their documentation
<b>3.Import Project</b>The exported mapping and rules can be imported into another SAP system.
On the selection screen, select Extras -> Import. The program then prompts you to enter the name of the PC file. The file is imported and the contents are analyzed. After the analysis, a list of the subprojects and objects found is displayed.
You can now mark the objects to be imported. Project data existing already are check-marked. They are overwritten by the import.
You can prevent a project already existing in the target system from being overwritten by using function "Import under different name".
Note: The selected elements are imported together with their documentation.
If you feel this is helpful, don't forget to reward points. -
How to transport proxy object abap part
Hi ,
I am working with one outbound proxy . The proxy was working fine in production ,now one requirement came in which we have to add one extra field to Proxy .field has been added in message type and proxy was generated in respective ABAP box
abap coding every thing was done and it worked fine in Dev . I transported the PI part ( DT,MT,MI and MM ) .
However I am not sure how to transport the ABAP proxy in ECC from dev to prod .
Can you kindly please tell me all steps I tried to search in SDN but getting confused in what object I have to transport and how from ECC .
Regards,
SaurabhHi Sarvesh ,
Thanks a lot for all your reply .
It partially worked as I created the transport with proxy object but not toatally as all my objects are not included in the transport .
when I am doublicking the My proxy interface and then going in used object TAB then I am able to see the structures .
Abap team wants to include these structure in the transport .
Actually the code has already been transported and it is throwing the dump value as it is unable to find the new field as the new strucutre is not transported .
Should I tell Abap team to manually make some random change in the str now and save them again so that when I re generate proxy then it will be added to transport.
Regards,
Saurabh -
How to transport the Holiday Calendar.
HI Experts,
How to transport the Holiday Calendar.
Actually the "Transport" option in menu bar is showing but it is disabled.
Please advise.
Regards,
TomeshHi Tomesh,
Once you created the holiday calender, you have to click on the transport icon which can be displayed at the left top of the scree "SCAL" transaction.
Once you click on the transport icon with " truck symbol " then only all the holidays and holiday calender will be moved to the target system.
Try this and let me know the feedback.
Hope it will sort out your issue.
Regards,
Azish -
How to Transport iViews from Portal Dev system to Prod system?
Hello friends,
This is an urgent request and it would be of great help if you can give me a solution to this.
We have a Development Portal and a Production Portal. There is no QAS Portal. We are on EP 5.0 and BW is 3.5. Coming to my question, I have created an iView on a Web Application Designer template and assigned it to a role on the Development Portal. The report displays well on the Portal. Now I want to move this newly created iView to Production Portal. I absolutely have no idea how to do this as it is generally a Portal person's work and I have been asked to do this as the Portal person is currently on leave. I need to move the iView to Production as quickly as possible and I would really appreciate if any of you can send me detailed steps on how to do this.
The best way to say thanks in SDN is to assign points to helpful answers and I will not forget that.
Thanks,
Deepthi.Hi Deepthi,
observe these links:
Here is some material:
How to Transport Models Within SAP Analytics
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/035be5d4-0a01-0010-b48a-d4c8c9b020b5
Actually, those pieces are also included in my book "SAP NetWeaver Visual Composer" which is already available from SAP-Press ( http://www.sap-press.com/product.cfm?account=&product=H1932 )
If Usefull Asain the points.
Thanks,
kiran.
Message was edited by:
kiran manyam -
How to transport Hierarchies?
Hey BW gusy,
How to transport Hierarchies from BWD to
BWT and BWP?
ThanksClick Transport Connection' tab in the Admin Work.
go to the InfoObject and double click it, then press the transport icon, it will jump you the 'Transport Connection' tab where you can assign it to a transport.
Here is the transport process step by step:
se09 - biw
create tranport - workbench req. - skip project name - note transport number
rsa1 - transport connection - collect objects - select pc - find the pc - move from left to right
grouping - collect necessary objects - hit transport bus with no bex
comes with a request - match req. number generated in se09
se09 - display request - req is modifiable in tree - select request - release task - release parent as well - get screen with status
go to production system - stms - click bus - choose bp2 - opens all transports - shows my req - click import icon ONLY my request -
import done - ready message.
check in rsa1 in production
se09 - bw
create tranport - workbench req. - skip project name - note transport number
rsa1 - transport connection - collect objects - select pc - find the pc - move from left to right
grouping - collect necessary objects - hit transport bus with no bex
comes with a request - match req. number generated in se09
se09 - display request - req is modifiable in tree - select request - release task - release parent as well - get screen with
status
go to production system - stms - click bus - choose bp2 - opens all transports - shows my req - click import icon ONLY my request -
check in rsa1 in production -
Dear Gurus,
Could you tell me please, how can I transport 100 users between two portals?
Thanks,
LeventeHI there,
I know my reply is bit late but i wanted to not only tell you what to do but how to transport
These are the steps to transport from one portal to other:
Process of Transport as EPA(Enterprise Portal Archieve)
EXPORT:--
Login to the the portal.
Navigate to System Administration.
Navigate to Transport-->Export.
Create a Folder inside the Portal Content say "TransDemo".
Right on the Folder and Select new Tranport Package and fill in the following properties.
Transport package name (required).
Transport package ID (required).
Transport package ID prefix (optional).
Master language (required).
Description (optional).
Select Objects for Export
Open the object (Transport Package) for editing.
Add all required iView, Page, Role, Workset in the object using right click.(Can directly add a folder also).
Click on to Export button.
After clicking Export Button file name is automatically generated (Unique name).
Export Selected Objects to .epa file.
Download Export File- It displayed how many files it exported.
Click on to "Download Export File" link for download.
Save .epa file in your hard drive.
IMPORT--
Login to the the portal.
Navigate to System Administration.
Navigate to Transport-->Import.
Select .epa file on Destination Server.
Import Editor Select "Client" as source for packages file
Select .epa file (Which is the back up file) Click on "Upload" button
Start Import and Check Status after uploading click on to "Import" button.
Display all imported objectAll iviews and roles are restored .
Just follow the above steps and ask if you have any doubts as i have used this method to transport many roles from one portal server to other.
Please reward with points if you find it helpful.
Regards
Pooja -
How to transport the BW query's variable to BO webi report
Hi all
I'd like to know how to transport the BW query's variable to BO 's webi . today ,I created a sap customer varible in my bw system to get the max calmonth in the active table.The varible in the BW side run's well ,but I use this query to build a new univers ,and created a new webi report base on this univers ,but the question is the webi report can't get the varible's value I wann to know how to transport the bw varible value to BO webi report
Thanks and regards,
Peter .zhuI have changed my variaable in my bw query ,I found if you use SAP default variable it is ok in BO side . So I get a guidline by SAP default variable ,I changed my customer variable in variables edite ,don't use 'ready for input' .And then the variable can be useful in BO side .
Edited by: peter zhu on Jun 16, 2008 11:43 AM -
i recently moved all of my photos from one portable drive to a new and much larger one. I use LR 5 and and all of the folders now have a ? in their folder icon. The thumbnail is there but no actual photo. How do i reconnect them?
Jim Boehme
[email protected]Duplicate post
see the answer at your earlier post LR 5 -
I have 100 songs on i pod touch. But when i connect it to itunes it only showed 44 songs. What is actually happening and how to fix the problem so that all music in my iphone can be seen in my itune
If they are iTunes purchased music then go to Settings>iTunes and App Store and turn off Show All.
Next
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device. -
How to transport text in report programs
hi experts,
any one tell me how to transport "text" in report programs.
thanking u ,Chk these threads:
Transporting Translations of Text Elements in SE38
How do I disable input for a table control?
Hope this helps.
Regards
Vinayak -
How to transport standard text in SO10 to different system.
Hi,
I need to change the standard text in SO10. I need to change the custom text. We have a custom text id (zval) associated with it. How to transport the changes i have done from Dev to Quality to Production.
I wanted one clarification: when we create the transport manually, whether only those changes what i have done for the text can be transported or it will include all the other text which are initially present (like table entries). From the program RSTXTRAN, can you give the what are the inputs need to given.
Please let me know regarding this. Thanks in advanceSteps..
Create a work bench CR in the transaction SE09..
Modify the task to Development correction / Repair..
Go to the program RSTXTRAN..
In the name of correction give the task number (Not the CR number)
Give the Text Key..Your standard text name..
Press F8...
Press select all..
Then Press enter..
Then press the button "Trsfr texts to corr".
Now the standard texts will be moved to a CR..
Then release the CR and move it to QA.. -
How to Transport standard text in scpits from 1 client to other
HI I am veerendra,
Can you please tell me,
How to Transport standard text in scpits from 1 client to other
THanks,
VeerendraHi veerendara,
1. a little tricky
2. goto se09 and create a new
customizing rqeuest.
3. after that
in the object list,
go in edit mode
and a new window will come
where u can add the objects(in table control)
4. there u put
program id = R3TR
object type = TEXT
object name = TEXT,YHRS_FNF_LTR,YHR1,E
where
TEXT = TEXT
YHRS_FNF_LTR = name of standard text
YHR1 = TEXT ID
E = english language
regards,
amit m. -
How to transport the object in XI?
Hi friends,
Anybody can give me the idea or any document for transporting the objects in XI from Development system to Quality system.As per my knowledge we can transport using File and CMS, but i don't have clear idea. Anybody explain me clearly or provide me any document?Hi,
There are two ways to Transport XI objects-
1) File Import/Export
2) CMS
CMS is somewhat standard way to do. Becuase you can track the objects. But for this you need to install the CMS separately.
just go thru these quick links-
http://help.sap.com/saphelp_nw04/helpdata/en/e1/69a740aa053a13e10000000a155106/frameset.htm
/people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
Also check in service.sap.com- for how to guides-
https://websmp201.sap-ag.de/nw-howtoguides
Refer
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi - Transport in XI
Configuration of CMS in Central NWDI & SLD to transport XI objects
/people/praveen.mayalur/blog/2007/05/31/configuration-of-cms-in-central-nwdi-sld-to-transport-xi-objects
CMS Trnasport
How to Use CMS in XI 3.0.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
CMS based transport in XI
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d8f7b2-0701-0010-b09a-cda4cca2c98e
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
Change and Transport Lists for CMS Transports
How To Transport XI Content Using CMS
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306
File Transport
Configuring Groups and Transport Targets.
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
also have a look at:
Transporting XI Objects
http://help.sap.com/saphelp_nw04/helpdata/en/93/a3a74046033913e10000000a155106/content.htm
Thanks
Swarup
Maybe you are looking for
-
How to use decode function in oracle apex 3.2.1
Hello Friends, how to use decode var_decode := 'decode'||'('|| var1 ||','|| -800000000000000||','||'.A'||','|| appreciate your help. regards/kumar Edited by: kumar73 on Apr 23, 2010 12:25 PM Edited by: kumar73 on Apr 23, 2010 12:27 PM
-
10.5.3 file names
Trying to change a document file name in a folder, after upping to 10.5.3, is iffy. I can highlight the name and select portions of the text in the name, but then nothing. Typing in a new name or an adjustment to a file name shows no response from th
-
Why does a new desktop creation unexpectedly initiate with a background differing from the originating desktop? How can I control or eliminate this behavior?
-
PDF to Web Screen Issue?
We are in a test system and in the SAP logic I successfully see the PDF data going into output. However, when I go to display the PDF from the Web transaction, the screen just seems to lockup, then when I tyry to go to another screen within our order
-
I don't remember having security questions years ago now they are asking and I don't know the answers. How do I reset them?