Actual call cost higher than shown on my phone

I have noticed that calls to landlines and mobiles are being charged to my account at a much higher rate than shown on my phone during the call. For example (all calls from Ireland): 1c per minute call cost shown to local landline - I was actually charged 11c for 3 minutes; .175c shown to Ireland mobile: 2min59s charge =.62c; to UK landline: .19c per minute shown, actual charge for 21sec = 70c; UK mobile .209c per minute shown, actual charge for 24s = 30c; Netherlands Mobile .222 per minute shown for 4min:39s actual charge = €1.20. On Skype Account total cost of calls for 1 March to May 3 comes to €4.72. Yet Account balance dropped from abt €9 to €2.59 a drop of over €6. Has anyone alse noticed discrepencies like this and found out the reason?

Hello,
As far as I can see you have been charged correctly. You can check our calling rates here:
http://www.skype.com/en/rates/#FR
Remember to include the connection fee. After checking at your Account Page (Call History) you still feel that you have been incorrectly charged please contact customer service
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Similar Messages

HT3702 The charges to my account are higher than what I actually charged?

I have been billed by iTunes for numerous amounts the past month. I play candy crush and my phone is always in my possession but the charges I'm being charged is always higher than what I use. Today I played and used 2 $0.99 but when I logged into my bank it is showing two charges for $9.94 and $9.93? I have kept a record of what has been charged to my card and it is not matching up. It is totally over $180.00 and I have never nor would I ever charge that much for a game. Please call me or email me ASAP concerning these erroreous charges!

iTunes Store & Mac App Store: Seeing your purchase history and ...

C2-01 Call log & Call cost feature is missing...

Recently i updated nokia c2-01 with new firmware version 11.10, no problem occur..
but in dial call log there is no call summary feature in NOKIA C2-01, there is only latest call duration option, but no call history option, and no call cost feature & call management as compared to other nokia phone, just like NOKIA 1209...
one problem is also occur , when i play any music from media player, during play i open any msg or apply any new theme my phone is restart...
If I have helped you, please hit the star at the bottom of my posts - it's appreciated!
Don't forget if your problem is solved to press the "Accept as Solution" button.

There is a long thread on this at another forum..
http://www.dslreports.com/forum/r23501543-IMG-Caller-ID-on-in-New-York
It is normal for the box to start showing the option before it's actually live.
You won't need any service call or change of equipment. it will just start working when it's live.
From that thread some areas of NY have it. Verizon doesn't announce schedules on anything too much so you are highly unlikely to get an answer to "when".

Is it possible to upgrade to higher than "snow leopard" directly?

My MacBook is not what it used to be. I've had it for four years now and have not upgraded the OS, so it is still on Leopard. Is it possible - and how much does it cost - to upgrade to higher than "snow leopard" directly? In which case, how do I do it?
Thanks guys!

Hi Maria,
Any newer oSX is going to slow you down, but may be useful, but you need 10.6 & update it to 10.6.78 to go any higher.
You need to get 10.6 & update to 10.6.8 first to be able to buy it from the App Store & download it.
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 4GB at least, more if you can afford it)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It's been pulled from the online store & Apple Stores, so you have to call Apple to buy it, last I heard.
Call Apple Sales...in the US: 1-800-MY-APPLE. Or Support... 1-800-275-2273
Other countries...
http://support.apple.com/kb/HE57
You have to get 10.6.8 first to go even higher to 10.7 or 10.8

Peformance question TKPROF/Autotrace Cost High when using index why?

I'm going through a legacy database application to do some application code performance tuning of the PL/SQL.
I am constrained from changing the code logic so I can only add indexes and hints. As I identify full-table-scans I'm using hints to force the code to use the index and now the Cost is Higher than with full table scans. Though the application code runs in batch mode and processes a lot of records.
Can anyone provide any insight into why the cost goes up when using Hints in the SQL?
I have additional testing to do though I just wanted to pose the question.

Firstly, the cost can be less for a full table scan because with a full table scan Oracle can do multi block IO with a full scan. So reading a large amount of data from a table will go much faster if the table is full scanned as opposed to accessed by an index (your forcing the query with a hint can actually be extremely detrimental to the query).
Secondly, if you are not allowed to make any code changes, i'd recommend not taking the path you are currently on (adding hints). That may be warranted in a few situations, but likely not many assuming you have accurate statistics set up on your database.
Here's an article that deals with full table scans ....
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:9422487749968
Hope that Helps.

The bottom list of apps on my ipod touch screen is way higher than its suppose to be

hi i have an ipod touch 2nd generation i dont update it to often cause i have very very slow iternet and it can take up to 4 hours and i dont have the time to update it but the bottom list of apps i dont know what its called but i think its the app bar is way higher than normal i dont know why the only app i really use is pandora i dont know if that helps

HI,
Try a Reset of your Device... You will not lose any data
Turn iPod touch off and turn it on again.
Press and hold the Sleep/Wake button on top of iPod touch for a few seconds until a red slider appears, and then slide the slider.
Then press and hold the Sleep/Wake button until the Apple logo appears.
From Here http://support.apple.com/kb/ts2771

Can I call getRequestDispatcher more than once?

All,
Does a servlet allows getRequestDispatcher to be called than once?
This is what I'm trying to do. While the server is processing data, I want to forward the user to a temporary page to display "Processing Data". Once
the server got the result, then I want to forward the user to the separate page to display the data. But before forwarding to the second page, I flushBuffer() and reset() the response object. WHen reset(), I got IllegalStateException. How can I fix this? Here is my code snippet:
1. Forward to first page:
getServletContext().getRequestDispatcher(
"/ProcessingNoticePage.jsp").forward(request, response);
2. Flush out and reset:
if(response.isCommitted())
System.out.print("\nresponse is committed");
response.flushBuffer();
System.out.print("\nResetting response");
response.reset();
System.out.print("\nComplete reset");
3. Forward to second page:
getServletContext().getRequestDispatcher(
pageName).forward(request, response);
I got the IllegalStateException on the reset() in step #2. Thanks.

What do you mean by refresh?
The servlet is actually calling another object. THat objects call other objects to perform server side processing that talks over RMI/IIOP. This process might take more than 30 seconds. So in the mean time, I made the servlet forwarding to a temp page to let the user know that data is being processed. Once all the results are back, I set the result to the request obj. and then forward to another JSP page. This (second) JSP page will display the data.
--kawthar

Table creation Error "Ref Count for this object is higher than 0"

Hi All
I have a problem in creation of table using SDK on a button event. I have a procedure to create tables and fields. If I call this procedure on a menu Event than it works fine but If I call this procedure on a button event than It gives error "Ref count for this object is higher than 0" . I know this error occur When an object does not release after creating a table. but this error occur at when first table is created. My code it given below. plz see and give me your valuable suggestions.
Dim oUserTablesMD As SAPbobsCOM.UserTablesMD
            Try
                oUserTablesMD = B1Connections.diCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserTables)
                oUserTablesMD.TableName = "AM_OBIN"
                oUserTablesMD.TableDescription = "PutAway Table"
                oUserTablesMD.TableType = BoUTBTableType.bott_Document
                lRetCode = oUserTablesMD.Add
                '// check for errors in the process
                If lRetCode <> 0 Then
                    B1Connections.diCompany.GetLastError(lRetCode, sErrMsg)
                    MsgBox(sErrMsg)
                Else
                    B1Connections.theAppl.StatusBar.SetText("Table: " & oUserTablesMD.TableName & " was added successfully", BoMessageTime.bmt_Short, BoStatusBarMessageType.smt_Success)
                End If
                System.Runtime.InteropServices.Marshal.ReleaseComObject(oUserTablesMD)
                oUserTablesMD = Nothing
                GC.Collect()
                oUserTablesMD = B1Connections.diCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserTables)
                oUserTablesMD.TableName = "AM_BIN1"
                oUserTablesMD.TableDescription = "PutAway Upper Grid"
                oUserTablesMD.TableType = BoUTBTableType.bott_DocumentLines
                lRetCode = oUserTablesMD.Add
                '// check for errors in the process
                If lRetCode <> 0 Then
                    If lRetCode = -1 Then
                    Else
                        B1Connections.diCompany.GetLastError(lRetCode, sErrMsg)
                        MsgBox(sErrMsg)
                    End If
                Else
                    B1Connections.theAppl.StatusBar.SetText("Table: " & oUserTablesMD.TableName & " was added successfully", BoMessageTime.bmt_Short, BoStatusBarMessageType.smt_Success)
                End If
                System.Runtime.InteropServices.Marshal.ReleaseComObject(oUserTablesMD)
                oUserTablesMD = Nothing
                GC.Collect()
            Catch ex As Exception
                MsgBox(ex.Message)
            End Try
Thanks
Regards
Gorge

Hi Gorge,
The "Ref count error..." usually occurs in case of Meta Data objects not being properly cleared. And yes, you have got the error in the right place, generally while creating tables / fields / UDOs. For this, you just need to clear the Meta Data object (At times even DI objects like Record Set) once they are used.
Eg: Release these objects in the below way in a Finally Block.
System.Runtime.InteropServices.Marshal.ReleaseComObject(oRecordSet);
Hope this helps.
Regards,
Satish

When is a contract legal. If the local store suggests I send in my 2008 Macbook in for 310 at their suggestion can the copany turn around and tell me it costs more than 1200 dollars?

I went to my local Apple Store with a display problem and was told 700 dollars to reair it there or send it in for a complete overhaul referbish for
310 plus tax. I took it home consulted with my wife she said for a 2008 310 wasn't bad. I brought it in and set I an agreement for the 310 and sent it in to returned in 3 to 5 days. I also read online that others had done the same theing. 3 Days later I get an email from Apple that the repair would cost more than 1200 dollars and do I want to repair it for that price. I called Tim Simpson and was told Apple doesn't honor agreements made at the retail store. Should Apple be obligated to honor it's contracts. I am assuming that Apple retail and Apple repair work for the same company. The hinge problem has been a problem and Apple had a free repair window for 6 months but didn't tell it's customers about it. At least I never heard from them. So when is a contract a contract and has Apple success lesoned it's famouse customer support. We have been using Mac's since the 80's and currently have 7 products currently in use in our household. I used to work for a computer consulting company and since moving to North Carolina moved completely to Apple. Is it time to revise that thinking. Thanks for you ear and input

Hi,
Thanks for the response. The store told me everything would be fixed for 310 because the go through the entire computer and fix any problems they find. Now was that a written guarantee or a verbal assurance. To Bob if I wasn't told that the price would be lower then I wouldn't have bothered to send it in and we would use it until it stopped functioning and know one would be upset. It was at the store suggestion I sent it in and spent over an hour of my time traveling to an from the only Apple store in my area. I worked in technology for 12 years and have dealt with and performed customer service on a professional level. I have experience with contracts and if someone says we will do something for you writes up an invoice and does not say that it is up to the "depot" then there is a case to be made.

BOM- Actual Additional Cost

Hi Experts,
In production order :status - released : Summary Tab : actual additional cost field the additional cost is not shown. .
Looking into the Journal entries created from that transaction I can't find any entry generated out of that service or labor item. But the Unit price for that item is same as that shown in the field Product price of the BOM window.
Plz help
Regards
Aniruddha

Hi Experts,
I have similar problem. We have created 7 Labor type item for 7 BOM since we have different rate for each BOM item.
I already check the following,
Valuation Method = Standard
Item cost is not null we encoded the rate already
GL method is set by item group
WIP inventories and WIP variance is already set.
Issuance Method is Back Flush
My problem is 2 of of 7 BOM item has no additional cost n the journal entry (zero amount)when we received FG quantity . I already compare the master data , all set up is the same except for item cost which has different rate.
Please help ASAP

Localization in OBIEE 10g(Error "start row is set higher than the row count

Hi All,
I m Working on Localization.
I have used exteranize string and saved excel file and added language column and inserted data en and fr and loaded the file into the database.
then i have created 2 variables
one is for weblanguage SELECT 'VALUEOF(NQ_SESSION.WEBLANGUAGE)' FROM DUAL
second is SELECT SESSION_VARIABLE, TRANSLATION FROM TAB_EXTERNAL WHERE LANGUAGE = 'VALUEOF(NQ_SESSION.LOCALE)' when i click on Test for the second variable it showing error
"start row is set higher than the row count"
i have seleted start row =10 and show some 10.then also it is showing same error.
Please send me the solution ASAP.
Thanks and Regards
Kiran Kumar

Hi Kiran,
I am working in OBIEE localization. I created two variables and when press test i am getting vaules successfully. But in OBIEE application i am getting columns in english only. It seems there is some problem with values in DUAL table. It contains only 1 column called 'DUMMY' and value as 'X'.
Please give me complete configuration steps to setup localization OBIEE 10g. Please drop me a mail to [email protected] if u have steps. I will call u if u provide contact number.

I received my new Verizon Edge bill in the mail and it is $80 higher than my old plan. I have been so unhappy with this change over. Went through hell getting our second phone activated because of a weird computer glitch and when we asked if we would re

I received my new Verizon Edge bill in the mail and it is $80 higher than my old plan. I have been so unhappy with this change over. Went through hell getting our second phone activated because of a weird computer glitch and when we asked if we would receive any consideration for the time, travel, and money we put into getting the phones the way they were supposed to be, we were told to wait until the bill came and then they could make adjustments. Now I have the bill and have no idea "who" the we would be that could make adjustments. To top it off, the only way I know my account will get any attention is to post this in chat. I am so disappointed and will be counting the months until our phones are paid off and we can change companies.

Call 800-922-0204
I just purchased a new device using Verizon Edge. Why does my bill look higher than normal?
There’s two reasons why your first bill after signing up for Edge might be higher than normal:
Prorate Charges – If you upgraded an existing line and did a price plan change, you may have price plan charges and credits that went into effect the day you upgraded.
Sales Tax – Most states require sales tax on the full retail price paid by the customer, which in most instances will be charged at the time of the first invoice.
Note: Customers who purchased devices in AL, AZ, CO, IL, NM, ND or SD will be billed taxes and surcharges monthly as payments are made.
Your bill will normally include:
Your last Edge installment payment
The next Edge installment charge
If you are on a MORE Everything Plan, a monthly access discount for each qualifying line.
The details of Edge installments and discounts can be viewed at the line level portion of your bill under Monthly Charges and Equipment Charges, or in My Verizon, My Bill then Charges By Line.

Why can't I get an update higher than OS X 10.6.8?

I am new to this whole thing but... Why won't my computer update past/higher than 10.6.8 (I ran the software update and it said I'm up to date)? I need at least 10.7 for an application I'd like to download...

Which model MacBook Pro do you have? 10.6.8 is the last version of Snow Leopard - you would have to purchase Lion or Mountain Lion but, if your machine will support Mavericks (http://support.apple.com/kb/HT5842), you can update to that free.
Purchasing Lion or Mountain Lion requires a call to Apple - you can't buy it directly from the Mac App Store.
Clinton

Actual Activity Cost

Hi Friends
For calculating the actual rate system take all the actual activity cost and divide it with actual quantity. I want to know how the system is calculating actual activity cost.
In KSII system will calculate the actual activity rate. What is the backgroung calculation. Or how to find out the actual activity cost per period is XXXX.
Regards
Jos
Edited by: Joji Jose V on Nov 15, 2010 3:58 PM

Hi Jose
1. Actual Activity cost means Actual cost posted with cost center and act type in FI postings / Depreciation postings
however, this is quite rare... To use this, Act Type must be switched in OKKP in Control Indicators
2. In absence of (1), Actual Actvity cost means Actual cost posted with cost center
3. If there are more than one act type in a cost center, then KSS2 would split the costs between the act types based on your Splitting rule in OKES... And then these costs would be divided by Actual Act Qty to calculate the Activity price
Regards
Ajay M

CFBundleVersion must be higher than previously uploaded version

I got this error and cannot figure out how to resolve it. In my info.plist file I set the Bundle version to 1.8. My current binary on the app store is 1.7 and yet when I try to validate in the Organizer, I get the error that the CFBundleVersion must be higher than the previously uploaded version. I tried changing the bundle version in Xcode and in parallel iTunes Connect to 1.9, to 2.0, to 1.80, to 2.01, to 2.8, and 3.8, but with no success. The new version of the app is currently waiting to upload.
Any ideas how I can get the app to validate properly in the Organizer. I have never had this problem before and it is very frustrating.

Dear xnav,
Thank you! I actually figured it out right after I posted and now it works just fine. My misunderstanding was that I was trying to send a past archive thinking this was the new archive. Thanks to you, I now understand this much better. Then my problem was that "Archive" was greyed out. All I needed to do, which you mention, is to select the build for an iOS Device rather than the simulator. Then "Archive" showed up in the menu and it worked just fine. I was able to archive the 1.8 version and upload it. Thank you for all of your help.

Actual call cost higher than shown on my phone

Similar Messages

Maybe you are looking for