Actual cost is not appearing in CJE0 reports.

Dear All,
I am facing a problem that when i am running CJE0 t-code for Budgut vs Actual then actual cost incurred on WBS is not showing in reports.
After settlement cost is showing ' 0' in reports pls. help.
Thanx in advance
Vishal Kr. Sharma

Double click in the row against the WBS on actual column element where you expect to see you actual cost.
Regards
Sreenivas

Similar Messages

Actual cost are not posted

Hi all,
I am doing Purchase Order against project for service,assigning WBS Element in it,
and doing service entry sheet against that P.O.
But I am not getting plan & actual cost reflected in Project builder & reports.
Is there any setting for getting Plan & Actual cost ?

Have you accepted the service entry done? Actual Costs wouldn't appear unless you accept the service entry.
If you haven't done planning (T Codes CJR2 or CJ40), Plan costs wouldn't appear on the WBS.
You should be able to see commitments on the reports if you have the configuration settings for commitments.
Regards
Sreenivas

Actual cost are not updating in prodcutcost collectors ( KKF6N) - Variances

Hi SAP's
We are facing the problem with the Variance calculation for product cost collectors.
The issue is When we are calulating the Variances for prodcut cost collectors the actual costs are not ( For few materials of BOM) updating.
Because of these the variances are showing high.....If I settele this variances to COPA, my copa report is will be going wrong.....
Please help me to comeout of this problem.
Thanks in Advance
PrasadReddyS
FICO Consulatnt

Hi Anand
Please add the budget profile at Plant maintenance order level no need to add any substitution rule
budget should also be control at order level
Thanks
trinath

Lead time values are not appearing in the report for current year.

Hi friends,
Iam checking a report in production. where lead time values are displayed as 0 for 1 key figure lead time3 (w/0 dim) . i found there is a formula for this it shows like NODIM ( 'Lead Time 3' ).and there is a value for cal.lead time
how can i get values in the report.
Thanks ,
VRV.

Hi,
Although your question is not clear, I understood that the formula built on that KF is NODIM. Basically it means, units of measurement is not considered when calculating.
Eg: 5 Minutes + 5 Kilograms = 10
You please try to analyze your KF by the above logic. Then you would be able to figure out why the data is not appearing in the report..
Assign if helps...
Regards,
Suman

WHT amount not appearing in FBL1N report for Document type RE

Dear Friends,
While running FBL1N report for any vendor where TDS is applicable, the WHT amount is appearing for KR document type. But when it is RE document type the WHT amount is not appearing in the report. How can we resolve this? Any enhancement/any note to be applied?
Regards,
Ramkumar

Hi,
FBL1N is having the classic withholding tax field hence please don't refer the those fields.
please don't refer those fields.
Please review attached note 363309 for detailed explanation.
BSEG-QBSHB is designed to fill for the classic withholding tax. And
extended withholding tax information is stored exclusive in table
WITH_ITEM.
You can check in table BSEG for the fields and will find that system
do NOT update field BSEG-QBSHB.
In your line layout,you define a field BSEG-QBSHB. But actully the field
of vendor/customer line item is filled with zero from FI. Thus,it shows
zero in line item display.
And as note 363309 says,
"Remove the field which contains the withholding tax information
from your display variant.
If you want to display the withholding tax information, double-click on
the document number and subsequently choose 'Withholding tax'."
Regards
Madhu M
Edited by: M Madhu on Jan 18, 2012 9:13 AM

In make to order cycle semifinished costs are not appearing in itemisation

Hi
We are facing a problem in Make to order. When a production order is created with respect to a sales order, semifinished costs are not appearing in Itemisation or cost component structure of Production order.
In other cases like make to stock and planning with final assembly costs are appearing. we are checking costs at CO02 - goto menu- costs - itemization.
Please provide us solution for this problem.
Thanks and regards,
Deepa

Hi
Please check 'Cost component Structure' Attribute details data for the semifinished component.
In that chek for 'Rollup cost' and also check for 'Filter Criteria for cost component views on Itemization' properly.
Regards
Laxmiprasad
Apart from above pls check for semifinished product in material master in costing1 view for material origin check box, check it if not selected.
Regards
Laxmiprasad
Edited by: Laxmiprasad Pagidala on Jan 22, 2008 2:03 PM

OPM Actual Costing (PMAC) not including AP Invoice transactions

Hi,
OPM Actual Costing (PMAC) not including AP Invoice transactions in 12.1.3 version. We have set profile GMF:Include Receipts in Actual Cost = 0, GMF:Include Invoices in Actual Cost = 1 still AP Invoice not included in OPM Actual costing.
Observed, Invoices which has IPV are shown as in Actual transaction view with line source as "Invoice Price Variance". I was looking for a line source with "AP invoice" and "IPV"(if exisits) in Actual transaction view screen.
Thanks,
Solomon.

Hi,
did you run the extract AP charges request ?
thanks .
Ahmad.

Order plan cost not appearing in PS report.

Dear PS friends,
I have an issue in order plan cost updation ( budget report ).
Used the prescribed WBS in maintenance order ( additional data ), but its not appearing in planned cost of CJ31 screen.
Checked the following
a) WBS is account assignment element.
b) Network type order appended indicator in OPSV.
c) Setting in network type parameters for " determine plan
cost".
d) WBS and order - both are showing plan cost when booked separately, but not integrated.
Can anybody help me to resolve this !
Thanks in advance
-- Sri --
Edited by: Srinivasan Madaswamy on May 18, 2008 2:15 PM

Hi,
In case of the maintenance order (Order Category:30)
Please check the follwoing in Tcode OPSV:
1. type is maintained default i.e ++++ (this will consider all the order types mantioned for maintenance order.
2. Please selelct the appropriate controlling area.
3. Appended plan indicator has to be checked mark,
4. Assigned funds in the plan indicator has to be checked mark,
5. In Tcode IW32: In the additional data Tab assign the WBS Element. Save the maintenance order.
Hope its useful.
Reward point if useful. Revert abck if any other issue.
Thanks..

Cost elements not appearing in report

Hi,
We have reports done in report painter. we use cost element group to retrieve the amounts posted to that group.
I added 2 more accounts to the cost element group and saved.
but it is not appearing when I run the reports which shows cost element wise amounst for teh period.
rgds
Neha

Hi sanjay,
thanks.
But GR53 gives me Library and report group.
when i go to GRR2, gives the library I see in GR53, and search report group in list of values ,
I am not able to see the report group as above.
When I manually type in it says
Report Y511 does not exist
Message no. KH 502
Diagnosis
You tried to change a row/column structure which does not exist.
Procedure
Choose an existing row/column structure or creating a new one using
    'Row/column structure' -> 'Create'.
Pl advice.
thanks
neha

COPA - Planned Material Cost not appearing in KE30 report

Hi all
In COPA planning, I manually planned the Material cost (Material External Price) along with the Sales Quantity and Revenue for two company codes (one plant in each co code). But in KE30 report, I could see the material cost (MEP) values only for one company codeplant. What could be the issue?
I even tried valuation in KEPM. Valuation step is calculating and populating the material cost in KEPM, but the values are not flowing to KE30 reports. And this happens to only one of the two company codes.
Thanks
Vamsi

Hi Vamsi
Please check table CE2XXXX, where XXXX = Op Concern.... Here, can you see the plan line items??
If yes, then the issue is with your report definition in KE30... May be you are restricting values display in KE30 report by virtue of your selection parameters
br, Ajay M

OPM Actual Cost Process not selecting all Inventory Movements

We have completed 27 Move Immediate transactions (TRNI) but only 2 of the transactions appear in the Actual Cost Transactions View so our PMAC cost is not as expected. Those 2 transactions were in Sept '09. All other transactions happened in Apr, May, Jun of 2009. On July 7 the profile option "GMF: Include Inventory Movements in Actual Cost" was changed to YES. Does this mean that the Actual Cost Process will not pick up those move immediate transactions that occured before July 2009?
Robert Lovell

Hi Robert
Yes...exactly, since you have closed all the said periods before u run your Actual cost process, and later you changed your profile option.
If you want, that all the transactions (TRNI) to be in Actual process as View, Functionally (I mean from front end) it is not possible now, but u can make use of PL/SQL Language by means of technical help then you can open those periods from back end and then do the set up from front end, and then you may able to view those transactions.
It is purely technical help and require some gud stuff to do this.
Regards
Raj

Field label not appearing in OIM Report Page

Hi,
Though this sounds like a silly problem, but I am not able to figure out what could be the problem.
I have created a new report in OIM and it is working perfectly fine as per the stored procedure. The only problem is that one of the label name is not appearing correctly in the report page display. It consists of the following fields:
1. First Name
2. Last Name
3. User iD
4. Custom field of the target application resource -say- abc.
In the xlWebAdmin.properties file, I added a new property for the custom field -
report.CustomReport.label.CustomField=abc
The same value has been written in the XML metadata of the report.
However, in the report page in OIM the label appears as - ???en_US.report.CustomReport.label.CustomField???
Please advice.
Regards.

Actually, we are getting a few errors while running the script and hence I was looking for any alternate, if possible.
java.io.IOException: java.io.IOException: /app/oracle/product/APP/10.1.3/j2ee/home/jsp/bin/ojspc: not found
at java.lang.UNIXProcess.<init>(UNIXProcess.java:148)
at java.lang.ProcessImpl.start(ProcessImpl.java:65)
at java.lang.ProcessBuilder.start(ProcessBuilder.java:451)
at java.lang.Runtime.exec(Runtime.java:591)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
It is unable to locate "ojspc" path. I am not sure as to where this path is referenced. I have to change it there, so that it refers to thecorrect one.
Regards.

JDE World / Actual Costed BOM ( not standard ) Manufacturing

Hello,
I was wondering if any of you knew if JDE had the capability to report an actual costed BOM.
We are running LOT control on 90% of our products and would like to report an actual cost for each LOT / work order.
This would include,
Actual labour collected through Kronos
Actual price paid for a piece part (we may have paid premium on a particular lot)
This would then give me the actual cost of a unit which I can then compare against price sold and report profit and loss at part number work order level.
Your help is much appreciated.
Thanks,
Dan

Dear Janos Noll ,
Can you please share with me, what goes wrong for SAP B1 community members if SAP provides this feature in B1 ?
I believe SAP is intrested in SAP B1 Product Ehanancement, that is why SAP has created this forum upfront.
Personally I believe that there is far gap between quality of SAP product and Add-On developed by other agencies.
When Customer is spending money on SAP brand name they must receive the same quality all to gather.
Hope you understand and support me on this DRQ. I strongly believe it is of utmost importance for SAP B1 community members that includes, Partners,Consultants,Customer and last but not the least SAP.
Thanking you in advance,
Samir Gandhi

GL not appearing in PCA report S_ALR_87013336

Dear Experts,
For acct XXXX, there's balance & we can view line item thru FI (tcode: FBL4N). We can see PC been assigned to those line items, but the GL XXXX not reflecting in PCA report (tcode S_ALR_87013336).
GL XXXX is a Balance Sheet GL (not a Reconciliation GL). This GL is not added to 3KEH. There are other GLs too, which are not added to 3KEH, but still those are appearing in PCA report S_ALR)87013336.
If you can please advice about this discrepancy.
Regards,
Hussein.
Edited by: Hussein Merchant on Apr 18, 2011 5:05 PM

After adding 'trip type expenses in the layout' in the layout, save the layout as a variant and give it a name.
Next time when you run the report, put that variant and then run
Values will come

Actual cost is not seen in the variance calculation KKS2

Hi
I   did variance calculation of a Production order ( after telco) . Its a co - product.   The target cost , actual cost and allocated cost   fields are present after execution.   Now the actual cost field is   blank and so   the variance is not correct.
Pl advise on why the actual cost field is not populated with the cost.
Thanks
kamala

Hi
KOB1 shows the actual cost . I do TECO for the PO and calculate Variance for co-product material, and the actual cost is showing at zero. But   then i do settlement KO88, and the   variance amount gets posted CORRECTLY and FI document is generated.
So why is the ACTUAL COST field   ' ZERO'    in KKS2, but    KO88   settlement shows the variance amount.
It there some different logic to do variance calculation for   PO   involving main product which have co-products in it.
Thanks for any inputs
kamala

Actual cost is not appearing in CJE0 reports.

Similar Messages

Maybe you are looking for