Actual Difference between Dev Alpha B and LE Z10 and Z10 ??
Hi all,
Well i just want to have a detailed configuration differences between these versions of BB10 Hardware's.
What are the major differences of DAB, LE Z10 and Z10 ?? if there are any.
But it seems they are different. The battery connector in LE is on the opposite side (like Dev Alpha).
Similar Messages
-
Actual difference between a standard , sorted and hashed atble
hi ,
1. what is the actual difference between a
standard,sorted and hashed table ? and
2. where and when these are actually used and applied ?
provide explanation with an example ....hi
good
Standard Internal Tables
Standard tables have a linear index. You can access them using either the index or the key. If you use the key, the response time is in linear relationship to the number of table entries. The key of a standard table is always non-unique, and you may not include any specification for the uniqueness in the table definition.
This table type is particularly appropriate if you want to address individual table entries using the index. This is the quickest way to access table entries. To fill a standard table, append lines using the (APPEND) statement. You should read, modify and delete lines by referring to the index (INDEX option with the relevant ABAP command). The response time for accessing a standard table is in linear relation to the number of table entries. If you need to use key access, standard tables are appropriate if you can fill and process the table in separate steps. For example, you can fill a standard table by appending records and then sort it. If you then use key access with the binary search option (BINARY), the response time is in logarithmic relation to
the number of table entries.
Sorted Internal Tables
Sorted tables are always saved correctly sorted by key. They also have a linear key, and, like standard tables, you can access them using either the table index or the key. When you use the key, the response time is in logarithmic relationship to the number of table entries, since the system uses a binary search. The key of a sorted table can be either unique, or non-unique, and you must specify either UNIQUE or NON-UNIQUE in the table definition. Standard tables and sorted tables both belong to the generic group index tables.
This table type is particularly suitable if you want the table to be sorted while you are still adding entries to it. You fill the table using the (INSERT) statement, according to the sort sequence defined in the table key. Table entries that do not fit are recognised before they are inserted. The response time for access using the key is in logarithmic relation to the number of
table entries, since the system automatically uses a binary search. Sorted tables are appropriate for partially sequential processing in a LOOP, as long as the WHERE condition contains the beginning of the table key.
Hashed Internal Tables
Hashes tables have no internal linear index. You can only access hashed tables by specifying the key. The response time is constant, regardless of the number of table entries, since the search uses a hash algorithm. The key of a hashed table must be unique, and you must specify UNIQUE in the table definition.
This table type is particularly suitable if you want mainly to use key access for table entries. You cannot access hashed tables using the index. When you use key access, the response time remains constant, regardless of the number of table entries. As with database tables, the key of a hashed table is always unique. Hashed tables are therefore a useful way of constructing and
using internal tables that are similar to database tables.
THANKS
MRUTYUN -
Ok, so this is my first post here and I am admittedly terrible at forums. Someone might say, "This was addressed in the ___________ thread by __________! Go read it!" --- that may be so but I've spent enough hours trying to google this problem into submission to no avail based on what is apparently working for others, so I would like a chance to get specific answers to specific questions that aren't from Mar 2011, etc.
So first of all, I'm confused by all the various Wine programs/apps/whatevers. I've seen Wine, Wineskin, Winery, Wine Bottler, and at this point I wouldn't be surprised if there are even more than that. What's the difference between all of these and how do they work with one another? What do I actually need to get windows programs working?
All of my google searches have led me to people giving out fish, but no one giving out fishing lessons. I'm not a pro at mac and windows and all that, but I'm a fairly bright individual who gets VERY frustrated, very quickly, when I don't understand the why and how of something I'm attempting.
I've also found "answers" where the person attempting to help starts off helpful enough, but degrades into the most archaic of techno-babble after about 5-6 sentences. On the other hand, I've watched tutorials on youtube where the poster decides to skip (apparently crucial) sections of the tutorial, and mutters such gems as: "... you might wanna have to run Wine first before you can do anything, cuz I think it has to configure it and set up a bunch of stuff"
O.o
A happy medium between techno-babble and the most basic of explanations would be ideal for me, and I'd imagine for others as well.
Here is a summarized history of my relationship with Wine:
Diablo II - I downloaded this awesome thing which ended up being... uh... I guess Diablo II in a Wineskin "wrapper". I'm not sure, all I know is that it's a D2 icon, and if I go to 'show package contents', it's got C drive, Program Files, et cetera inside of it. I double click it, it launches D2, and it works like a dream. <3
'Vanilla Install' - That's what I heard someone call it. It was the command/terminal style install using xquartz and xcode found at http://www.davidbaumgold.com/tutorials/wine-mac/. I followed every instruction to the letter, and got all the way to '$ sudo port install wine', at which point it started going smoothly, free from the possible error he described regarding the installation of xcode, and then just failed after I left the room to use the restroom and came back. Please don't ask me to repeat what the error was, because honestly, after reading more things on the interwebs, I'm confused as to why it's even necessary to go through all of that, so I'd rather not try that route again anyways, rendering the error message quite possibly irrelevant.
Wine + Wine Bottler - So I decided to try to seek out an easier method, as I know that one must exist that doesn't involve command lines. I found a video tutorial at http://www.youtube.com/watch?v=m0BBkISOcEA, and oh man would it be great if that method had actually worked. Again, I followed all instructions provided to procure my free fish, and at the point in the video where he declares that "xquarts or x11 will open" - it doesn't open. Nothing opens. I was trying to install Star Sonata, btw.
So here I am, thoroughly worn out, frustrated at all the random places Wine is installed on my mac now, and just want someone to explain it all, from top down, without getting toooooooo technical on me. I know that might be asking a lot...## I know that the poster has already found a solution, but the following is a possible answer for others that have similar issues.
For Winebottler, just go to their website and download it. Run the program. Choose .wine as your prefix (best choice) or whatever suits you best. You'll need a functional X11. If you can't use the one that comes with your mac, download the latest one from the website.
If your issue is one with Winebottler's Wine not running correctly due to X11, then you have a pretty ugly problem, although a simple upgrade is the best solution (Upgrade XQuartz.app).
http://www.davidbaumgold.com/tutorials/wine-mac/#part-1
The above website is the easiest way to get REAL wine on your computer. First of all, Wineskin WInery, etc. are NOT WINE. They are 3rd party apps that may use Wine or may have originally part of Wine, but they are no longer up to date with Wine. WineBottler is currently up to date with the stable releases of Wine (but not the maintenence releases).
For the website tutorial and to run Wine on your mac without using a thrid party app, you will need to know a few things.
First, you will need to know basic control of the command line. That means, sudo (you must know the administrator password to your computer), and the forms of cd (change directory).
Second, you will need Xcode. Download 4.2 (stable) or whatever other versions you want, but beware: It is over 1 GB, and you will need time for it to work.
Third, you will need to get MacPorts and configure it. The tutorial should have this data.
When you download wine (use sudo port install wine-devel for the latest development release of wine), it will first download a lot of dependencies. This will take a while. After that, it will download wine itself.
After obtaining wine, to run a program, open the terminal.app window.
cd desktop/XYZ/ZYZ\ WRQ
The above will first enter the desktop, then folder XYZ, then folder ZYZ WRQ. From here,
wine th11e.exe
Or whatever executable you are trying to open. (Using Subterranean Animism as my example).
It should, in theory, run the program. Watch the terminal for errors. If there is an X11 problem, then it's not wine acting up. If the app crashes or has other issues, check the Wine Application Database to see if your app is compatible with wine.
If you have any further questions or other things, feel free to reply; I may or may not get back to you, but there's a good chance that someone will come in eventually. Otherwise, the Wine Wiki should have some information. -
Whats the actual difference between Business system and Business service
whats the actual difference between Business system and Business service
Business System
1) Business system is a logical system, and there is an importance on physical existence of the system.
2) Also SLD entry is required.
3)It is generally used for SAP applications, this is just a general prinicple followed but not mandatory.
4)This is defined as part of the SLD and is a physical system whose parameters are well defined.
5(Business systems refers to the physical systems, for instance the R/3 system. You define the business systems in the SLD
Business Service
1) You use a Business Service, when you do not have the System details of the the partner system to which you want to communicate. i.e. you have not configured the partner system in SLD.
2) Business Service is an Absract Unit with Sender and Receiver Interfaces,In this case you need to explicitly add the message interfaces while doing configuration in ID.
3) It is generally used for NON-SAP applications, this is just a general prinicple followed but not mandatory.
4) This is not defined as part of SLD and whose technical parameters are not completely known.
5)Business service is used when the message is not addressed to a business system. It is used mostly in B2B scenarios.
Also go through these links and threads...
http://help.sap.com/saphelp_nw2004s/helpdata/en/c7/301640033ae569e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
Business service or Business system??
Business Service vs Business System in Integration Directory.
Best Regards -
Is there any actual difference between Release, Debug and Debug Local configurations in SSRS project?
For example in VC++ Debug build would have all optimization turned off (by default) and included additional Debug information in executable.
Since there is no executable produced for SSRS - is there any actual difference between configurations? Or are they only for the purpose of deploying to different destination servers?Hi JoeSchmoe115,
The Project Configuration and Configuration Manager is a feature supported by Visual Studio, on which Business Intelligence Development Studio or SQL Server Data Tools is based. We can use Configuration Manager to create and manage sets of project properties
in project configurations. You are right that the project configurations is only for deployment purpose in a Report Server project.
Reference:
http://technet.microsoft.com/en-us/library/ms155802.aspx
Regards,
Mike Yin
TechNet Community Support -
Difference between rebalance power 0 and rebalance power 6 in asm
Hi ,
What is the difference between the below statements and the impact on the database?
alter diskgroup name1add disk '/dev/ora_asm_disk87' rebalance power 0;
alter diskgroup name2 add disk '/dev/ora_asm_disk88' rebalance power 6;
DB version:11.2.0.2
OS:AIXuser13364377 wrote:
Hi ,
What is the difference between the below statements and the impact on the database?
alter diskgroup name1add disk '/dev/ora_asm_disk87' rebalance power 0;
alter diskgroup name2 add disk '/dev/ora_asm_disk88' rebalance power 6;
DB version:11.2.0.2
OS:AIXpower 0 = DO NOTHING.
power 6 = do stuff
power 11 = do stuff faster than power 6 (consume more I/O and CPU)
In the above example, it will actually rebalance both disk87 and disk88 at the same time.
In this example the rebalance of 88 would wait until disk87 rebalance completes.
alter diskgroup name1add disk '/dev/ora_asm_disk87' rebalance power 6;
alter diskgroup name2 add disk '/dev/ora_asm_disk88' rebalance power 6; -
What's the difference between a web site and a web application?
I'm stumped trying to come up to a difference between a web site and a web application for myself. As I see it, a web site points to a specific page and a web application is more of some sort of 'portal' to content and information.
But where I'm stuck is that a web application is still viewed through a browser (is it not?) and a web site can still view content dynamically, making the line between web site and application prety gray.
For instance, does a web site using ASP.NET or AJAX (I assume ASP.NET is AJAX's proprietary sibling, if not, ignore ASP.NET AND concentrate on the AJAX), becomes a web application because it can retrieve data dynamically and asynchronously or would a website
using PHP and a CMS be more of a web application because it forms the pages on request, based on the request of the client and its content in its databse?
Or maybe I'm totally wrong here - what differenciates between a web application and a website?
http://support.peopleperhour.com/entries/68630566--C-mon-lets-Watch-The-Other-Woman-2014-full-movie-online-free
https://glossicom.zendesk.com/entries/68643806--%D0%BC-v%C9%AA%C9%9Bc-%C3%A4st-Watch-The-Lucy-2014-full-movie-free
https://cloudhance.zendesk.com/entries/68115098--%D0%BC-v%C9%AA%C9%9Bc-%C3%A4st-Watch-The-Lucy-2014-full-movie-free
This is totally personal and subjective, but I'd say that a website is defined by its content, while a webapplication is
defined by its interaction with the user. That is, a website can plausibly consist of a static content repository that's dealt out to all visitors, while a web application depends on interaction and requires programmatic user input and data processing.
For example, a news site would be a "website", but a spreadsheet or a collaborative calendar would be web "applications". The news site shows essentially the same information to all visitors, while the calendar processes individual data.
Practically, most websites with quickly changing content will also rely on a sophisticated programmatic (and/or database) backend, but at least in principle they're only defined by their output. The web application on the other hand is essentially a program that
runs remotely, and it depends fundamentally on a processing and a data storage backend.
http://support.peopleperhour.com/entries/68125597--%D0%BC-v%C9%AA%C9%9Bc-%C3%A4st-Watch-The-Lucy-2014-full-movie-free
https://cloudhance.zendesk.com/entries/67541393--Watch-The-Godzilla-2014-free-Online-Full-Movie-HD-Quality
http://support.peopleperhour.com/entries/68168787--Watch-The-Godzilla-2014-free-Online-Full-Movie-HD-Quality
https://glossicom.zendesk.com/entries/68161538--Watch-The-Godzilla-2014-free-Online-Full-Movie-HD-Quality
There is no real "difference". Web site is a more anachronistic term that exists from the early days of
the internet where the notion of a dynamic application that can respond to user input was much more limited and much less common. Commercial websites started out largely as interactive brochures (with the notable exception of hotel/airline reservation sites).
Over time their functionality (and the supporting technologies) became more and more responsive and the line between an application that you install on your computer and one that exists in the cloud became more and more blurred.
If you're just looking to express yourself clearly when speaking about what you're building, I would continue to describe something that is an interactive brochure or business card as a "web site" and something that actually *does something that feels
more like an application as a web app.
The most basic distinction would be if a website has a supporting database that stores user data and modifies what the user sees based on some user specified criteria, then it's probably an app of some sort (although I would be reluctant to describe Amazon.com
as a web app, even though it has a lot of very user-specific functionality). If, on the other hand, it is mostly static .html files that link to one another, I would call that a web site.
Most often, these days, a web app will have a large portion of its functionality written in something that runs on the client (doing much of the processing in either javascript or actionscript, depending on how its implemented) and reaches back through some
http process to the server for supporting data. The user doesn't move from page to page as much and experiences whatever they're going to experience on a single "page" that creates the app experience for them....can i make as many iweb websites as i want? ...and as many blogs as i want? ...i have never made one before....
....although, i do have my own small business and i do have a website that i paid a guy to make and also host....(which is a waste of $$$$ in my opinion as i think i can do a better job making one myself through iweb) ....
...anyways, i know it is splitting hairs but what exactly is the diff b/w a blog and a website ....i am under the impression that a blog is just a personal newsletter sort of thing,...? -
Difference between ECC 6.0 and earlier versions
Hi,
one of the difference between ECC 6.0 and earlier versions is that instead 'WS_UPLOAD' and 'WS_DOWNLOAD' in ECC we should use 'GUI_UPLOAD' and 'GUI_DOWNLOAD' respectively.
(of course SPDD and SPRO tcodes is known by everone i suppose)
Similarly can u all put down some differences here, atleast one entry by each, I think we can make a good docu. I have searched the net for the differences but could not get much, so by each of us contributing one each, it would become good docu..for all of us.
Thanx in advanceUnicode Errors Encountered and their Solutions
E1. In u201CTEXT MODEu201D the u201CENCODINGu201D addition must be specified.
Error:
OPEN DATASET FILE FOR OUTPUT IN TEXT MODE.
Solution:
OPEN DATASET FILE FOR OUTPUT IN LEGACY TEXT MODE.
E2. In Unicode, DESCRIBE DISTANCE can only be used with the IN BYTE MODE or IN
CHARACTER MODE addition.
Error:
DESCRIBE DISTANCE BETWEEN T_KOMK AND T_KOMK-HIEBO01 INTO BPOS.
Solution:
DESCRIBE DISTANCE BETWEEN T_KOMK AND T_KOMK-HIENR01 INTO BPOS
IN CHARACTER MODE.
E3. u201CUSR02-UFLAGu201D must be a byte-type field (Typ X or XSTRING )
Error:
IF USR02-UFLAG O YULOCK.
Solution: Since the data type of USR02-UFLAG is type INT and is compared with data type
X u2013 Hence the error. So we define a new variable ZULOCK and assign the
value of USR02-UFLAG to ZULOCK.
New variable
DATA: ZULOCK(1) TYPE X. "APBRP00
Assign value
ZULOCK = USR02-UFLAG.
Compare -
IF ZULOCK = YULOCK. u201Creplace IF USR02-UFLAG O YULOCK.
E4. HT cannot be converted to a Character type field
Error :
WRITE ht TO t_data+10(2).
Solution : Since the data type of ht is a type u2018Xu2019 and the data is been transfer to
t_data which has a data type u2018Cu2019. value of one data type cannot be copy to
another data type where one of them is type string .Hence the error occur,
so the data type of ht is been change to Type u2018Cu2019
OR
A Tab ( value 09 ) is introduced as part of the row. The value 09 is not converted in Unicode environment. Instead we need to use class
Error:
DATA: BEGIN OF ht,
x(1) TYPE x VALUE '09',
END OF ht.
Solution:
Define Class after the Tables definition.
CLASS cl_abap_char_utilities DEFINITION LOAD.
Data Defination : Comment internal table HT and define a variable HT type C.
* Insert + APRIA00 05/02/2007 Unicode project
* DATA: BEGIN OF ht,
* x(1) TYPE x VALUE '09'
* END OF ht.
* Insert - APRIA00 05/02/2007 Unicode project
DATA HT type C.
Before using HT assign Horizontal tab.
Ht = CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
E5. In Unicode programs the u201C#u201D cannot appear in names, as it is does here in the name u201C#LINESu201D
Error :
#LINES TYPE I,
Solution : Since the # is used in the start of name, it is not allowed. We need to
remove it.
Solution for the above
V_LINES TYPE I,
E6. In u201CTEXT MODEu201D the u201CENCODINGu201D addition must be specified as well as the addition was required FOR OUTPUT,FOR INPUT, FOR APPENDING OR FOR UPDATE was expected.
Error:
OPEN DATASET PATH_NAME IN TEXT MODE.
Solution:
Download = OPEN DATASET PATH_NAME FOR OUTPUT IN LEGACY TEXT MODE.
Upload = OPEN DATASET AUSZUG-FILE IN TEXT MODE FOR INPUT ENCODING DEFAULT.
E7. u201CTABu201D must be a character-type data object( data type C,N, D, T or String). Field string)
Error:
data: begin of tab, "Excel Parameter Split at TAB
t type x value '09', "Tabulator
end of tab.
concatenate 'Material' 'Package Status'
into z_download-line separated by tab.
( In the above command the two field are to be separated with a horizontal Tab. The earlier way of assigning the tab value u201809u2019 will not work in Unicode environment.
Solution:
Define a class just after the Table defination.
CLASS cl_abap_char_utilities DEFINITION LOAD.
Define variable Tab as shown below :
Data : TAB TYPE C.
Before the concatenate statement assign the value of Tab using pre-defined attributes.
TAB = CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
E8. Upload/Ws_Upload and Download/Ws_Download are obsolete, since they are not Unicode-
enabled; use the class cl_gui_frontend_services
Error-1: Function WS_DOWNLOAD is obsolete in Unicode environment.
call function 'WS_DOWNLOAD'
exporting
filename = zfilename
tables
data_tab = z_download.
Solutions-1: Instead of WS_DOWNLOAD use GUI_DOWNLOAD.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
* BIN_FILESIZE =
FILENAME = zfilename
TABLES
DATA_TAB = z_download.
E9. The "/" character is reserved for identification of namespaces. It must be entered twice.
The name of a namespace must be at least 3 characters long.
Error :
U/N(3) TYPE C, "U/N --> ERSETZT DURCH SPACE
Solution :
* Special character can not be used to define a data variable
* U/N(3) TYPE C, "U/N --> ERSETZT DURCH SPACE
U_N(3) TYPE C, "U/N --> ERSETZT DURCH SPACE
* Insert - APSUS02 07/02/2007 Unicode Project
E10. "LP_TAB" and "CS_TAB" are not mutually convertible. In Unicode programs,
"LP_TAB" must have the same structure layout as "CS_TAB", independent of the length
of a Unicode character.
Error : This error is encountered when data from one internal table is copied to another
internal table which different structure. In this case its LP_TAB & CS_TAB.
LP_TAB[] = CS_TAB[].
Solution :
* Replace + APSUS02 07/02/2007 Unicode Project
* LP_TAB[] = CS_TAB[].
move-corresponding CS_TAB to LP_TAB.
* Replace + APSUS02 07/02/2007 Unicode Project
E11. Could not specify the access range automatically. This means that you need a RANGE
addition.
Error : Range need to be specified as an addition to the command.
DO 4 TIMES VARYING HELP_CHAR FROM ABCD(1) NEXT ABCD+1(1).
Solution :
DO 4 TIMES VARYING HELP_CHAR FROM ABCD(1) NEXT ABCD+1(1)
* Insert + APSUS02 07/02/2007 Unicode Project.
RANGE ABCD+0(4).
* Insert - APSUS02 07/02/2007 Unicode Project.
E12 . Processing Terminated Error code: Error in opening /
Path not found when downloading to Unix directory.
Error : PARAMETER: outfile(92) DEFAULT
'/CP/interface/NPP/data/MX/cbslaprcpts'
LOWER CASE,
kmxmstrd AS CHECKBOX.
This error is encountered when the path is missing. The above path is related to CCP.
Solution: For testing purpose comment the original path and replace it with
/CP/interface/CCD/Unicode_test/
E13. Upload/Ws_Upload and Download/Ws_Download are obsolete, since they are not Unicode- enabled; use the class cl_gui_frontend_services
Error: Function WS_UPLOAD is obsolete in Unicode environment. (During UCCHECK)
Call function 'WS_UPLOAD'
Exporting
Filename = zfilename
Filetype = u2018DATu2019
Tables
data_tab = z_upload
Exceptions
Conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_table_width = 4
invalid_type = 5
no_batch = 6
unknown_error = 7
gui_refuse_filetransfer = 8
others = 9.
Solution: Instead of WS_UPLOAD use TEXT_CONVERT_XLS_TO_SAP. Do not use temporary file put the file name as it is.
1) First define a type pool and a variable of type truxs_t_text_data.
TYPE-POOLS: truxs.
DATA: it_raw TYPE truxs_t_text_data.
2) Use this it_raw in the function module in parameter i_tab_raw_data. Put file name and the internal table in the function module.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
* I_FIELD_SEPERATOR =
* i_line_header = ' '
i_tab_raw_data = it_raw " WORK TABLE
i_filename = zfilename
TABLES
i_tab_converted_data = z_upload[] "ACTUAL DATA
EXCEPTIONS
conversion_failed = 1
OTHERS = 2.
Comment u201Ci_line headeru201D. It takes the first/ header line of the file which is to be uploaded.
Put square brackets after internal table as shown above.
E14. CURSORHOLD may not be converted into a number.
Error: GET CURSOR LINE CURSORHOLD VALUE CURSOR_HOLD.
Solution: In the declaration part of CURSORHOLD, one field is of u2018Pu2019 type and one field is of u2018Iu2019 type, which is not allowed in Unicode environment.So change the the type of it to NUMC. -
What is the difference between Component,Server,Tool and Software?
HI,
What is the difference between Component,Server,Tool and Software?
SHABEERHi
Every individual part that constitutes in making an SAP System is called a COMPONENT.e.g DB instance, Java CI, ABAP CI etc
SERVER is the actual composition of different components of SAP.e.g. a database alongwith can instance would constitue an application server.
TOOLS are the products from different organisations (SAP or Non SAP) that can be used for different functionalities like keeping a check on jobs, monitoring of the system , e.g Tivoli
SOFTWARES are a kind of tool that help you to bring up results from the system in a user acceptable format. These are utilities that act as interfaces between the user and the system.
regards
Chen -
I downloaded Mavericks and it won't install. I did re-set my password and when I click on Install for Mavericks, I still get a box for "administrator password" and it still won't accept my new password. Is there a difference between my Apple ID and the administrator password they're asking for? I never had an administrator password-- I just hit enter and have never had a problem before with previous installations. I'm on an iMac, from 2007, running Mt. Lion (version 10.8.5). I've been looking for other's posts who may be having the same problem, but haven't found any. Can anyone help?
Ugh. The 'no password, no work' thing is a recent Apple development. I ran into it on my system and ended up having to do a clean install on a partition I fully erased.
I suppose, if you have the ability to, go online and look up how to burn a bootable DVD image. Download the 10.8.4 image then use the Disk Utility to make a boot image of it. You'll need a dual-layer DVD or a USB drive (or memory stick at least 8GB) If you've got an optical drive, burn the disk, if you've a USB device, use that.
Then get a pocket drive and copy your important files off the system or let Time Machine do a full backup.
When the backup is done, insert the disk and hold down the C key until the machine boots off of the DVD. At the point you get to the start window, go to the menu and choose the Disk Utility.
In the Disk Utility, reformat the drive. You go to the actual DRIVE (not the Macintosh HD, but the root above it that is the actual hard drive device)
I always do this and *partition* it into several volumes, the benefit being, you can store all of your music, documents and importans stuff on that secondary storage volume you make - it will have it's own index and then the first volume is where you put the OS and it will have it's own index as well. That way, if the OS throws a wobbler and you need to reinstall, you don't lose your data.
Depending on the size of your hard drive, it is good to give your OS partition at least 60GB and optimally 100GB, and the rest for storage.
Name your volumes, use the little box sliders to manually size them or put that number in the size window, select for the format, Mac OS Extended (Journaled) and hit Apply and then the Disk Utility will quickly create your new partitions.
Once finished, quit the Utility and it will return you to the OS installer. Select the volume you want to install to and it should start up and install.
Once the installation is done, you'll get the new machine startup then you MUST put in a password for the computer. Once you're in, and to the desktop, don't bother with any Mountain Lion updates, go right to the App Store and get the Mavericks update and let it install the app to your Applicaitons folder, then do that install.
On a side note, there MAY be a way to make a disk image from the Mavericks application and avoid the entire Mountain Lion step.. I honestly do not know, but a bit of hitting the search engines may find out if there is. I think that if you looked for "make Mavericks boot disk or boot image' you may find something.
Good luck! -
Difference between ALBPM6.0 studio and ALBPM6.0 Enterprise server
Difference between ALBPM6.0 studio and ALBPM6.0 Enterprise server.Can anyone help on this.
Thanks in advance.Studio is the integrated development and test environment. As such, it's intended for designing processes, creating the UI for the screenflows, creating the objects and introspecting services that you want to tie into the process. Studio has a runtime engine that can be used by a single developer for testing purposes. It runs a little database called Derby and a Tomcat Web Server - again so the work done by a single developer can be tested on the developer's machine at runtime.
Enterprise on the other hand is the production environment. Unlike Studio, it does not have the capability to develop projects. It is the runtime environment where many end users can concurrently run their instances on an industrial strength engine. It can run on a standalone JVM or an application server.
Studio is for development. Enterprise if for Dev/QA/production environments where many users need to hit the engine and many instances need to run concurrently. -
Cost difference between PM report MCI8 and IW38 orders cost
Hi Experts!
I have an issue of cost difference between Plant Maintenance total actual cost of orders and Cost analysis report.
Short Text
Cost difference between PM report MCI8 and IW38 orders cost
Long Text
Applied SAP notes 180047 and 112841 for the following error:
Cost is not displaying in MCI8 for every 3 months intervals.
Now this problem has been resolved but got an another error like cost
difference between MCI8 report and IW38 order costs.
Note applied method:-
1). Configured FYV as Z1 with Period update for info structures S61 to
S65, S70, S114 to S116.
2). Regenerate order cost in Tcode OLI5.
3). PMIS: Statistical setup of info structures T.Code u2013 OLPM
For Info Structures which is changed in the configuration SO61-SO65,
SO70, S114-S116.
4). Copy info structures Version &( to Active version 000 T.Code u2013 OLIX,
Select Copy version
For all info Structure SO61-SO65, SO70, S114-S116.
*Steps for Reconstruction*
New another error like cost difference between MCI8 report and IW38
order costs.
Step 1. Transaction- MCI8, Order type - CORR, Period -01.2009 to
12.2009 and execute
Step 2. Drilldown the corrective maintenance order costs into period
wise.
Step 3. Transaction- IW38, Order type Corr, Period -01.2009 to 12.2009,
Currency - EUR and execute
Cost differences: E.g. Example A)
MCI8 IW38
Total costs 8.041,69 5.544,99
of WOs 18 18
So far my view is that, regardless of the selection criteria or the
output layout, predominantly the costs are different.
I would expect that they are equal. And what the right result are,..u2026Iu2019m
not sure.
Regards,
SanthamoorthyHello,
Sometimes this difference comes because of the selection period which we are choosing.
Try to run IW38 once with the help of Basic start and basic finish dates of the order.
And after that with the help of the period with the same dates range.
You will get the difference also.
the reason is that whenever any Posting is done in the previous month PM order the system changes the basic start date and when you select the current period and execute IW38 it shows the whole cost incurred on the order including all previous cost.
But in MCI8 it does not happen because MCI8 is run through LIS structures. And in this report only the current month cost will be shown by the system.
I hope you got the idea about differences.
Regards
Naveen -
Differences between XI 3.0 and 7.0?
Can anyone say the difference between SAP XI 3.0 and SAP XI 7.0? Also I would like to know when 7.0 is released in the market?
Hi,
that's the answer I received from OSS support regarding availability of XI 7.0 (status end of last year):
<i>the actual Release is XI 3.0 which is part of NetWeaver '04 as you
probably now.
XI 4.0 to XI 6.0 will be left out to synchronize the Release numbers of
NetWeaver components.
That means that the release which followes XI 3.0 is called XI 7.0 (and
not XI 4.0).
For XI point of view there is not much difference between XI 3.0 and XI
7.0
Regarding your question:
unfortunately we plan to give out the next major release just about end
of next year (2006).</i>
regards,
Peter -
Difference between Oracle Weblogic Administration and Ofm Soa Admin
Hi,
what is the difference between Oracle Weblogic Administration and Oracle Fusion Soa Weblogic server Administration?
pls help me anyone, i want to learn weblogic Administration, but having some confusions..........
thanks,The below is just for your reference. Actual content may vary....
Weblogic Administration:
Manage a WebLogic Server installation.
To install weblogic server in one or multiple instances
Installing on single or multiple physical machines
How to handle administration console, utilities, APIs, hangling security, database connection, messaging and transaction.
How to do runtime configuration for your applications.
How to use the monitoring tools to check the health of the servers and ensure maximum availability and performance.
Install and Configure WebCache 11g as Load Balancer
and Much more..
OFM SOA Administrator:
Manage a WebLogic Server installation (Administration Server and Managed Server).
To install weblogic server in one or multiple instances
Installing on single or multiple physical machines
How to handle administration console, utilities, APIs, hangling security, database connection, messaging and transaction.
How to do runtime configuration for your applications.
How to use the monitoring tools to check the health of the servers and ensure maximum availability and performance.
and
File System and Directory Structure in Fusion Middleware
Installing Oracle Database, Configuring RCU, weblogic server and SOA Suite.
Deploying SOA Applications.
Deploying and Undeploying Java EE Applications
Configuring Node Manager and starting Managed Servers using Node Manager
Monitoring OFM Server, admin server, managed server and composites
Configuring HA and Security (Creating users, assigning responsibilities)
Monitoring performance of SOA composites
Install and Configure WebCache 11g as Load Balancer
and much more..
Thanks,
Vijay -
Hi Friends what are the actual differences between AT NEW & ON CHANGE
what are the actual differences between AT NEW & ON CHANGE ? can you list some of the differences?
Hi,
At New
1. When a new record comes at new triggers. Atnew only used inside loop and endloop.
2. At new is controlbreak statment on at new the left side field change, the event
trigers and the values become 0 and *
On Change
1. On change of works same like at-new but the diff is it can be used out side of a loop,like select and endselect,case endcase.
2.. on change of is not a control break statement and we can use onchange of out side the loop
and
The Major difference between the two is that AT NEW can be used ONLY for INTERNAL TABLES, while ON CHANGE OF can be used for any loop processing i.e do..enddo, while..endwhile and loop..endloop also.
AT NEW <field>
The block will be executed when the SY-TABIX is 1 (or) when the SY-TABIX 1 value has a change with the SY-TABIX value.
With this block the field towards the right to the field are not accessable with in the block, and are shown with '*'. They can be accessed outside the block.
ON CHANGE OF <itab>-<field>
The block also works similar to the AT First. In this block all the fields are accesseble.
ON CHANGE OF triggers whenever there is a change in that particular field.
AT NEW triggers whenever there is a change in the fields before that particular field.ie. if there is a change in that combinations from the first field.
On change off' works on variabels. The 1st time the statement isreached a memory copy is made of the value. The next time the statementis reached, the current value is compared to the stored value. If thereis a difference, the coding between ON... and ENDON. is executed. Youcan use this for a table workarea field, but if you have the table loopin a routine and the routine called several times, you can get unwantedresults. (Check the value of the last loop with the value of the firstnew loop.)
The AT NEW (and others like AT END OF...) are specially for table loopprocessing. The coding between AT new FIELD and ANDAT is triggerdwhenever a the field or any field defined to the left is changed. Yourtable should be sorted by all fields from the left up to the consideredFIELD. Btw all fields to the right contain *, so it can be usefull tohave a second workarea filled to be printed or what ever you want.
REWARD IF HELPFUL
RAAM
Maybe you are looking for
-
Port Replicator vs Docking station. What's the difference?
I've just received a port replicator for my T410, and I find that I can't lock the Thinkpad to the unit. I presume THIS is the difference between a replicator and a dock.... Is that true? However, looking at the description of the port replicator, it
-
Urgent........Generic data extraction........
Hi Experts, I created a Generic extractor using a function module 1.I created a Function Mudule and tested the same in debugging mode it seams it is fetching the data properly. 2. I created the extract structure using SE11 in my extract structure I h
-
New-MailboxSearch with AQS for special characters
I've been asked to perform a specific query for a term with a leading dollar sign ('$'): $123,123.00. When I run the query for a leading dollar sign the keyword search term in the result appears as: Body:',123.00' It doesn't work if I use a backsla
-
Why do i have to enter my icloud password every time i watch a video
Everytime i watch video on youtube i am asked to enter my itunes password. This has been gonig on since i had a failed download on the itunes store. I have since then downloaded content from itunes with no problems
-
Is there a PDF User Manual for Photoshop Elements 10
is there a pdf user manual for photoshop elements10 to download Message title was edited by: Brett N