Actual difference between exterprise oracle 9i/10edition & standard edition

hi,
i want to know the actual difference between exterprise oracle 9i/10edition & standard edition.
plz reply me.
thanks,
regards.

For 10g
http://www.oracle.com/technology/products/database/oracle10g/pdf/twp_general_10gdb_product_family.pdf
For 9i
http://www.oracle.com/technology/products/oracle9i/pdf/o9i_family_features.pdf
HTH
Girish Sharma

Similar Messages

Differences between 8i enterprise and 8i standard edition

I have seen numerous discussions on whether 8i enterprise or 8i standard should be used in my division, can anyone point me to a source where I can get a comparision of the features between these two.
null

I have installed Oracle 10 XE and it just seems so easy to work with. There's a GUI for everything. It does not have SQL Plus(that I've seen), but there's an area to type your commands into inside the program that helps administrator the Database. I could not find any documents on 9.2 so Im reading documents on Orcale 10 that I have downloaded from this site.
I am wanting to practice creating, removing,resizing tablespaces, creating databases, and other DBA things. I also want to have triggers functions and procedures working on it too. I wrote some in college against Oracle 8i.

Is Oracle Application Server Standard Edition One available for purchase?

Is Oracle Application Server Standard Edition One available for purchase? I don't see it listed in the online Oracle store as available.
More information about this version of OAS can be found at http://www.oracle.com/appserver/feature_seone.html Would like to know
1) when it will be available
2) the differences between this version and OAS standard edition.
Thanks
Dev

Yes,
Oracle Linux 5.5 is actually inline with the related version of Red Hat linux as it runs on the same kernel.
So, yes, it is certified on this environment.
Also remember that OBIE Standard Edition is functionally the same ast OBIE Entprise Edition, the core difference are the licensing limitations of the Standard Edition which is based on the # of end-users.
Please award points if this was helpful.

Actual difference between a standard , sorted and hashed atble

hi ,
1. what is the actual difference between a
standard,sorted and hashed table ? and
2. where and when these are actually used and applied ?
provide explanation with an example ....

hi
good
Standard Internal Tables
Standard tables have a linear index. You can access them using either the index or the key. If you use the key, the response time is in linear relationship to the number of table entries. The key of a standard table is always non-unique, and you may not include any specification for the uniqueness in the table definition.
This table type is particularly appropriate if you want to address individual table entries using the index. This is the quickest way to access table entries. To fill a standard table, append lines using the (APPEND) statement. You should read, modify and delete lines by referring to the index (INDEX option with the relevant ABAP command). The response time for accessing a standard table is in linear relation to the number of table entries. If you need to use key access, standard tables are appropriate if you can fill and process the table in separate steps. For example, you can fill a standard table by appending records and then sort it. If you then use key access with the binary search option (BINARY), the response time is in logarithmic relation to
the number of table entries.
Sorted Internal Tables
Sorted tables are always saved correctly sorted by key. They also have a linear key, and, like standard tables, you can access them using either the table index or the key. When you use the key, the response time is in logarithmic relationship to the number of table entries, since the system uses a binary search. The key of a sorted table can be either unique, or non-unique, and you must specify either UNIQUE or NON-UNIQUE in the table definition. Standard tables and sorted tables both belong to the generic group index tables.
This table type is particularly suitable if you want the table to be sorted while you are still adding entries to it. You fill the table using the (INSERT) statement, according to the sort sequence defined in the table key. Table entries that do not fit are recognised before they are inserted. The response time for access using the key is in logarithmic relation to the number of
table entries, since the system automatically uses a binary search. Sorted tables are appropriate for partially sequential processing in a LOOP, as long as the WHERE condition contains the beginning of the table key.
Hashed Internal Tables
Hashes tables have no internal linear index. You can only access hashed tables by specifying the key. The response time is constant, regardless of the number of table entries, since the search uses a hash algorithm. The key of a hashed table must be unique, and you must specify UNIQUE in the table definition.
This table type is particularly suitable if you want mainly to use key access for table entries. You cannot access hashed tables using the index. When you use key access, the response time remains constant, regardless of the number of table entries. As with database tables, the key of a hashed table is always unique. Hashed tables are therefore a useful way of constructing and
using internal tables that are similar to database tables.
THANKS
MRUTYUN

What's the difference between wcc system components and standard components

hi Experts,
My customer has a question on the difference between wcc system components and standard components, I didn't find it from doc, anyone can help on answering this?
Best regards

Hi ,
System components are those which are providing the basic functionalities on UCM server by default . Standard components are those which are provided as-in on the server but need to be enabled per case basis . For example Framework Folders which is not necessary for the basic functionalities but is needed if user wants to .
This guide gives the administration level overview for UCM : http://docs.oracle.com/cd/E23943_01/doc.1111/e10792/toc.htm
Hope this helps .
Thanks,
Srinath

Whats the actual difference between Business system and Business service

whats the actual difference between Business system and Business service

Business System
1) Business system is a logical system, and there is an importance on physical existence of the system.
2) Also SLD entry is required.
3)It is generally used for SAP applications, this is just a general prinicple followed but not mandatory.
4)This is defined as part of the SLD and is a physical system whose parameters are well defined.
5(Business systems refers to the physical systems, for instance the R/3 system. You define the business systems in the SLD
Business Service
1) You use a Business Service, when you do not have the System details of the the partner system to which you want to communicate. i.e. you have not configured the partner system in SLD.
2) Business Service is an Absract Unit with Sender and Receiver Interfaces,In this case you need to explicitly add the message interfaces while doing configuration in ID.
3) It is generally used for NON-SAP applications, this is just a general prinicple followed but not mandatory.
4) This is not defined as part of SLD and whose technical parameters are not completely known.
5)Business service is used when the message is not addressed to a business system. It is used mostly in B2B scenarios.
Also go through these links and threads...
http://help.sap.com/saphelp_nw2004s/helpdata/en/c7/301640033ae569e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
Business service or Business system??
Business Service vs Business System in Integration Directory.
Best Regards

Hi Friends what are the actual differences between AT NEW & ON CHANGE

what are the actual differences between AT NEW & ON CHANGE ? can you list some of the differences?

Hi,
At New
1. When a new record comes at new triggers. Atnew only used inside loop and endloop.
2. At new is controlbreak statment on at new the left side field change, the event
trigers and the values become 0 and *
On Change
1. On change of works same like at-new but the diff is it can be used out side of a loop,like select and endselect,case endcase.
2.. on change of is not a control break statement and we can use onchange of out side the loop
and
The Major difference between the two is that AT NEW can be used ONLY for INTERNAL TABLES, while ON CHANGE OF can be used for any loop processing i.e do..enddo, while..endwhile and loop..endloop also.
AT NEW <field>
The block will be executed when the SY-TABIX is 1 (or) when the SY-TABIX 1 value has a change with the SY-TABIX value.
With this block the field towards the right to the field are not accessable with in the block, and are shown with '*'. They can be accessed outside the block.
ON CHANGE OF <itab>-<field>
The block also works similar to the AT First. In this block all the fields are accesseble.
ON CHANGE OF triggers whenever there is a change in that particular field.
AT NEW triggers whenever there is a change in the fields before that particular field.ie. if there is a change in that combinations from the first field.
On change off' works on variabels. The 1st time the statement isreached a memory copy is made of the value. The next time the statementis reached, the current value is compared to the stored value. If thereis a difference, the coding between ON... and ENDON. is executed. Youcan use this for a table workarea field, but if you have the table loopin a routine and the routine called several times, you can get unwantedresults. (Check the value of the last loop with the value of the firstnew loop.)
The AT NEW (and others like AT END OF...) are specially for table loopprocessing. The coding between AT new FIELD and ANDAT is triggerdwhenever a the field or any field defined to the left is changed. Yourtable should be sorted by all fields from the left up to the consideredFIELD. Btw all fields to the right contain *, so it can be usefull tohave a second workarea filled to be printed or what ever you want.
REWARD IF HELPFUL
RAAM

How to find out difference between IAS Oracle Home patches and 10.1.2 Oracl

How to find out difference between IAS Oracle Home patches and 10.1.2 Oracle Home patches.
I have read me document but i could not able to understand.
Please help me

user10721329 wrote:
How to find out difference between IAS Oracle Home patches and 10.1.2 Oracle Home patches.
I have read me document but i could not able to understand.
Please help meWhat docoument you are referring to?
If you source the application env file APPS<CONTEXT_NAME>.env file under $APPL_TOP directory then this will set ORACLE_HOME to 10.1.2
If you source the application env file <CONTEXT_NAME>.env file under $INST_TOP/ora/10.1.3 directory then this will set ORACLE_HOME to 10.1.3
Environment Settings
http://docs.oracle.com/cd/E18727_01/doc.121/e12841/T120505T120509.htm#F_92659x3Ax20H1x20Head1x3Ax20Environmentx20Settings
Thanks,
Hussein

What's the difference between UPK Professional and UPK standard

Hi
I want to know the difference between UPK Professional and UPK standard.
Thanks!

Hi,
In a nutshell, the primary difference is the use of Knowledge Center.
UPK Std makes use of limited usage tracking and reporting, whereas UPK Pro allows full use of the Knowledge Center and related technologies.
The Reports Management.pdf and User and Content Management.pdf documents highlight specifics as to what is only available in UPK Pro.
You will find these docs as part of the installation media.
Hope this helps.
Regards,
Greig

What is the difference between "subscribe Oracle Unbreakable Linux"?

Hello
I downloaded Oracle9i's 3 CD's and Oracle Enterprise Unbreakable Linux (32bit).
1) What is the difference between "subscribe Oracle Unbreakable Linux" that the RPM's will install automatically and the Oracle Enterprise Unbreakable Linux (32bit) that I downloaded?
2) Also where can I get "subscribe Oracle Unbreakable Linux" that the RPM'S install automatically?

See this thread, where you asked the same question:
How/where do you get "Subscribe Oracle Unbreakable Linux" from?
Sergio

Difference between Security Oracle user and Security User

Hi All,
Can anyone give me the difference between Security-> Oracle -> user and Security-> User in System Administrator Resp of oracle apps R12.
Thanks,
Mahesh.
Edited by: 991854 on Mar 12, 2013 1:49 AM

Can anyone give me the difference between Security-> Oracle -> user and Security-> User in System Administrator Resp of oracle apps R12.Security > Oracle > Register:
Use this window to register an ORACLE username with Oracle E-Business Suite. An ORACLE username grants access privileges to the ORACLE database
http://docs.oracle.com/cd/E18727_01/doc.121/e12893/T174296T174305.htm
Security > Oracle > Data Group:
A data group defines the mapping between Oracle E-Business Suite products and ORACLE database IDs. A data group determines which Oracle database accounts a responsibility's forms, concurrent programs, and reports connect to. See: Defining Data Groups, Oracle E-Business Suite System Administrator's Guide - Configuration.
http://docs.oracle.com/cd/E18727_01/doc.121/e12843/T156458T156461.htm
Security > User > Define:
Use this window to define an Oracle E-Business Suite user. This user is an authorized user of Oracle E-Business Suite, and is uniquely identified by a username.
http://docs.oracle.com/cd/E18727_01/doc.121/e12843/T156458T156461.htm
Thanks,
Hussein

Is there any actual difference between Release, Debug and Debug Local configurations in SSRS project?

Is there any actual difference between Release, Debug and Debug Local configurations in SSRS project?
For example in VC++ Debug build would have all optimization turned off (by default) and included additional Debug information in executable.
Since there is no executable produced for SSRS - is there any actual difference between configurations? Or are they only for the purpose of deploying to different destination servers?

Hi JoeSchmoe115,
The Project Configuration and Configuration Manager is a feature supported by Visual Studio, on which Business Intelligence Development Studio or SQL Server Data Tools is based. We can use Configuration Manager to create and manage sets of project properties
in project configurations. You are right that the project configurations is only for deployment purpose in a Report Server project.
Reference:
http://technet.microsoft.com/en-us/library/ms155802.aspx
Regards,
Mike Yin
TechNet Community Support

Oracle Database 10g Standard Edition

Oracle Database 10g Standard Edition Suitable for medium sized organization. Actually it supports how many no of concurrent connection, workload??

Yes, it is suitable for, and is used in many medium sized organizations. It supports as many concurrent connections as possible until the operating system starts paging or swapping. At which time it slows down. I personally have seen it handle 125 concurrent connections.
You question is like asking 'will a Pentium 4 CPU handle Microsoft Powerpoint?'. And the answer is 'yes, of course'. But what about when you want to run video clips in Powerpoint?
There is no accurate way of answering your question without understanding the exact workload you plan on generating.

How to Read Statspack Report in Oracle 11.2g Standard Edition

Dear All,
I am using Oracle 11.2g Standard Edition in Lab.
For the performance tuning, How can i read the Statspack Report ?
Please Note- I can't use the Oracle AWR feature due to License Limitation. As well as if i will generate AWR report with Oracle Standard Edition, it will be not proper and print error " DB time is zero for any interval Report.
-sumit
Bangalore,India

Hi Summit,
In oracle 11g you will be finding the spcreate.sql script in the same directory as hemant said just run that script
@@$ORACLE_HOME/rdbms/admin/spcreate.sql
And follow the normal procedure which you do for creating the statspack report using the perfstat user
can you please refer to below link for more details:
stack pack report in oracle 11g
Also see the link given by Aman sir.
Hi Aman sir its good to see you after long time.
Best regards,
Rafi.
http://rafioracledba.blogspot.com/

What's the difference between Java SDK and the Enterprise Edition?

What's the difference between Java SDK and the Enterprise Edition? Are they both free?

both r free but they are used in diffrent applications. sdk are used for simple apps that run on your computer while j2e (enterprise edition) are ment for large distributed computer systems that include servers and such. if you don't know the diffrence you probably wont need the the j2e, only the sdk.

Actual difference between exterprise oracle 9i/10edition & standard edition

Similar Messages

Maybe you are looking for