Actual end date is not update after closing a change

Hi,
We are using SCSM 2012, now I want to make report on which changes have been closed in the last month. In som way all the changes that have been closed in SCSM do not have an actual end date, all the changes that I have imported from our old tool does. It
looks like SCSM does not update this field by itself, but I can't find a field in the change managment module in which I can provide the actual end date.
How does SCSM 2012 copes with this?
Kind regards, Marco Jansen

Hi Greg,
We are actually testing this now, as MS is not planning to solve this issue on a short term. The use of the last modified date is casuing u a lot of trouble now as we have had an change on our change form casuingthe last modified for all change to be set
to the date of the change. That was the end of my closing data.
We are now getting the WA in place from Netviaconsulting, but that is not a complete solution. Not all change reach a state of complete before they are closed. Sometime you will close a change that is cancelled ,rejected or failed. this means that when
triggering on an update of the record every update will set the actual enddate. Besides when setting the actual enddate on the status closed, the date is update every time the worflow runs.
We just want the actual enddate to be filled when a change comes to the status closed from any other status, but this sets the actual enddate on every status change of the change. in some strange way ewe cannot figure this out.
If anybody has the correct configuration for this workflow it would be very useful. Most prefereably MicroSoft in this case.

Similar Messages

BIA Master Data Index Not Updated After Change Run

In BIA it shows master data 0VERSION table /BI0/SVERSION has 360 records which matches with the number of entries in SE16 /BI0/SVERSION. One record was added to 0VERSION so now SE16 /BI0/SVERSION shows 361 records. I did a change run for this infoobject 0VERSION but the BIA index for /BI0/SVERSION still only show 360 records. I expect it to show 361 records after the change run. Is this a bug? Thanks.

Hi Thao,
I see one of 3 possible scenarios:
1) You load 0VERSION as a part of master data load (from flat file or another system). You see your 11th record in version "M" after load and then you run change run that makes "A" version of the record. ---> BIA index should be automatically updated. If not - open OSS message to SAP.
2) You load transactional data in an InfoCube, and it has new value for characteristic 0VERSION. ---> In this case you need to run roll-up of this new load request in the InfoCube to let BIA index be in-sync.
3) You are modifying 0VERSION manually (e.g. SQL INSERT statement), so system is not aware of new record at all. ---> You need to run the mentioned single-table-index program to update BIA index.
Is it any of these 3 scenarios, or you have the 4th one?
Regards,
-Vitaliy
Edited by: Vitaliy on Aug 19, 2008 1:59 PM

HT1386 devices not updating after sync and changes made in itunes not happening?

Hi, I think my ITunes is corrupt and may need to be reinstalled? Changes made on the Mac in Itunes to playlist do not sync to either our 5 or 4S. other issues in Itunes I've noticed is that adding songs to playlists only works if I drag them...using the drop-down menu and 'add to' doesn't make the change occur. Any suggestions?

How is your iPod configured to sync with your iTunes library? Automatically or manually? In other words, what options do you have enabled from under the iPod's Music and Summary tabs?
Syncing music to iPod or iPhone
B-rock

Bug in newest version of iTunes: last played data not updating after songs are played

I just downloaded the newest version of iTunes on my Mac. The "last played" data is not updating automatically after a song has finished playing (even after waiting for a while). Sometimes in the older versions it would take 5-10 second for the data to update automatically, but even after several minutes, "last played" still shows as if the song had not just been played.

RestonMacGuy wrote:
I did something similar, but not the same: I "played" a few tracks from the iPod (fast-forwarding until about 30 seconds from the end) while the Shuffle was connected to my computer and in iTunes, which then caused the "Last Played" field to be updated.
The next time I connected my Shuffle, the Last Played values were updated.
I bet the Last Played was updated after you stopped playing the tracks...IN FACT. if you were watching your shuffle icon, you might have noticed the rotating thingy to the left of the eject symbol, meaning an update was ongoing.
This will happen AS LONG AS the track has "remember playback position" set.

After editing file in ACR 8.6 (Mac) , the file (NEF and XMP) modification dates are not updated

With both my Mac's, reset Photoshop C (2014) to previous version 2014.0. Now find that after editing file in ACR 8.6 (Mac) , the file (NEF and XMP) modification dates are not updated. Reloaded camera raw, etc., but still find modification dates are not updated, either using Finder or using Bridge to view dates. Editing other files, PSD, DNG, TIFF, etc., are updated and the information is correctly displayed.

Ok, not entirely sure what I did but it's now working (Bizarre!). The only thing I did was 'eject' the ACR 8.6 .dmg file from the finder side bar and restart PS CC, so that may have been where I was going wrong all along!
However, I now have another issue in that there is no preview of the shot in Finder on my iMac when I highlight the NEF file. I assume this is simply because Apple haven't yet released an update for the new D810 NEF files and so the computer doesn't know what it's looking at?!?
If anyone has any other ideas though, then I'm more than willing to listen.
Thanks again.

Deactivation date is not updating in Asset Master after retirement (ABAON)

Dear Experts,
Asset Capitalized on: 28.02.2009 and depreciation key used as: LINK-Str.-line from acq.value to zero without interest. Asset Retirement done with revenue (210) on 31.05.2009. We do have depreciation like (01 book depreciation, 15 Tax depreciation, 30 Local GAAP book depreciation). Below is the asset and class:
Asset name: Maruti Baleno
Asset Class: Vehicles
Here my question is after retirement done with the transaction code: ABAON u201CDeactivation onu201D date is not updating automatically in the system, however when am trying to update manually the system showing error like u201CDeactivation not possible. Dep.area 15 has acquisition values.
When am trying to do same transaction with T code: u201CABAVNu201D, the system updating the deactivation date.
Can anybody explain me why the above error happening and why the deactivation date is not updating with t code: ABAON.
Thanks,
Francis.J

Dear Atif Farooq,
In the AO74 the transaction types (Deactivate fixed asset check box also ticked)
200 Retirement without revenue
210 Retirement with revenue
When am trying to update manually below error appearing in AS02
Deactivation not possible. Dep.area 15 has acquisition values
Message no. AA296
Diagnosis
You cannot deactivate, since acquisition values are still present in depreciation area 15.
Procedure
Deactivation can only be posted by a complete retirement/transfer. The deactivation date is then set automatically.
The above asset procured in the year of 2009 and same has been retired 2009.
Thanks,
Francis J

Infostructure S502 not updated after certain date

There is an infostructure S502. It is not updated after a certain date.
It should be updated after saving in C011N.
This problem seems to have propped up after upgrade to ECC 6.0. Before that it was working fine.

I have tried a lot but still S502 is not properly updated. Basically the field for date i.e SPTAG is empty. Due to this when we try to select from MCRQ based on dates, no data is selected.
Is it because of some setting in MC23?

Data is not updating in DB Table

Hi...All
we have done the RFC-JDBC Synchronous scenario, we are getting the success messages into SXMB_MONI ,in the CCM also it was showing success. but data is not updating in to the Database Table. client want to see the response data in the Database Table only.
pls help me this is very urgent.
Regards,
Pasi.

Hi,
If everything is working fine in XI there is some problem in database end only while query gets executed. Try debuging the sql query which you have by giving log statement and see what the query generated is.
Got to your receiver jdbc communication chalnnel , Advance mode > Additional parameters,
Enter logSQLStatement in the name column and true in the value column
To view the SQL log Click on the message ID of the communication channel monitoring.
or, alternatively, in Runtime workbench, click your message> details> audit log tab.
Run the interface once more. Check the communication channel now. It will show the actual insert statement which is trying to insert into the DB and then you can figure out what is the query being fired to database and see if it is fine.
Copy the same query and run in databse. you will be able to find the exact problem.
thanks
amit
reward point if answer is useful

Average Active Sessions graph not updated after restart

Hi,
I just wanted to ask - I have restarted a database (11.1.0.7) with GC 11.1.0.1 but after the restart of the db the graphs on a performance tab are not updated. It means that the doesn't refresh and doesn't show actual data...
I checked jobs on the target database and GC repository but nothing is broken. Info on Home tab of the target DB is actual but not the graphs..
I also tried to clearstate and restart the agent but no change..
Any idea?
Thanks

This is a bug and can be solved by applying
Patch 10307099: PERFORMANCE CHARTS DO NOT UPDATE AFTER DATABASE IS RESTARTED
This patch is included in the july 2011 PSU: Grid Control Patch Set Update 11.1.0.1.4 for the Oracle Management Service, see MOS doc ID 1334286.1
Eric

Data is not updated in the database

hi.. to all..
i'm using the following code ...... but the data is not updated in the database.. the output window get closed as soon as i clicked save button...
i don't know wat's problem with the program...
Plz help me.. to get resolve this problem..
import java.applet.*;
import java.awt.*;
import java.sql.*;
import java.awt.event.*;
import sun.jdbc.odbc.*;
public class Customerdetails extends Frame implements ActionListener
     TextField ccod,cname,add,phno,conp,email,fax;
     Label l1,l2,l3,l4,l5,l6,l7;
     Button save,exit;
     Connection con;
     ResultSet rs;
     Statement stmt;
     String s1,s2,s3,s4,s5,s6,s7;
public Customerdetails()
    super("CustomerDetails");
    setSize(700,750);
    setLayout(null);
    setBackground(new java.awt.Color(245, 117, 105));
    l1=new Label("Customercode");
    l2=new Label("CompanyName");
    l3=new Label("Address");
    l4=new Label("PhoneNumber");
    l5=new Label("Contact person");
    l6=new Label("EmailAddress");
    l7=new Label("FaxNumber");
    l1.setBounds(20,100,100,70);
    l2.setBounds(20,180,100,70);
    l3.setBounds(20,270,100,70);
    l4.setBounds(20,340,100,70);
    l5.setBounds(20,420,100,70);
    l6.setBounds(20,500,100,70);
    l7.setBounds(20,580,100,70);
    ccod=new TextField();
    cname=new TextField();
    add=new TextField();
    phno=new TextField();
    conp=new TextField();
    email=new TextField();
    fax=new TextField();
    ccod.setBounds(200,120,150,50);
    cname.setBounds(200,200,150,50);
    add.setBounds(200,280,150,50);
    phno.setBounds(200,360,150,50);
    conp.setBounds(200,440,150,50);
    email.setBounds(200,520,150,50);
    fax.setBounds(200,600,150,50);
    Button save= new Button("Save");
    Button exit= new Button("Exit");
    save.setBounds(200,680,100,40);
    exit.setBounds(350,680,100,40);
    add(l1);
    add(ccod);
    add(l2);
    add(cname);
    add(l3);
    add(add);
   add(l4);
   add(phno);
   add(l5);
   add(conp);
   add(l6);
   add(email);
   add(l7);
   add(fax);
   add(save);
   add(exit);
save.addActionListener(this);
exit.addActionListener(this);
setVisible(true);
addWindowListener(new WindowAdapter(){
public void WindowClosing(WindowEvent w) {System.exit(0);}});
public void actionPerformed(ActionEvent ae)
Customerdetails cud= new Customerdetails();
if(ae.getSource()==save)
s1=ccod.getText();
s2=cname.getText();
s3=add.getText();
s4=phno.getText();
s5=conp.getText();
s6=email.getText();
s7=fax.getText();
try
      String query = "insert into Customerdetails (Customercode,CompanyName,Address,PhoneNumber,Contact person,EmailAddress,FaxNumber)"+ "values('"+s1+"','"+s2+"','"+s3+"','"+s4+"','"+s5+"','"+s6+"','"+s7+"')";
      Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
      con=DriverManager.getConnection("jdbc:odbc:prism");
      stmt=con.createStatement();
      rs=stmt.executeQuery(query);
      stmt.close();
catch(ClassNotFoundException e)
System.out.println(e);
catch(SQLException e)
System.out.println(e);
else if(ae.getSource()==exit)
System.exit(0);
else
System.exit(0);
public static void main(String args[])
   Customerdetails cud= new Customerdetails();
}

This doesn't look right:
,FaxNumber)"+ "values(because it's equal to ,FaxNumber)values(and your SQL server won't understand it, put a whitespace between.
/M

Database history growth not updating after EHP upgrade

Hi All,
We are using SAP ECC 6.0 (731 - SP09 ) & DB2 Fix pack 5 version.Database history growth not updating after EHP upgrade. I have check collector job running fin and DB tab > Configuration > Data Collection Framework > Configuration Collector are in green status.
Please help me to resolve this issue.
Regards,
MK

Hi MK,
You can try few things:
1. Check to collector standard job like SAP_COLLECTOR_FOR_PERFMONITOR should be running succesfully.
2.If you can check to data collector collection interval column , you will find it to be Not Schedule.
Try with Repair all collector.
To make it work properly you have to perform
Data Collection Full
Data Collection Incremental
Hope it helps
BR Vaibhav

Material availability date can not be after the delivery date

Dear Experts,
we are using the following scnario,
1. Once the user creates the sales order, automatically system creates PO in the background.
we have created Bapi program for creation of Background PO in SD User Exit.
The following issue occurs in Prd, DS1, QS1 server, We have done Technical upgradation project, Now when we creates sales order automatically po created with error message of Material availablity date can not be after the delivery date. even sales order no also not updated in the PO.
QAS server (without technical upgrade) i refered the same input parameter and used the same and create the sales order system generates PO automatically without error message.
Does any one can through lights on this issue,
Thanks and Best Regards,
Muralidharan S

Hi
The dates are determined due to shipping and transportation scheduling settings. So check whether the shipping and transportation scheduling is being performed as per the cofiguration settings after Technical upgrade. Since the MAD date should not be after Delivery date but it seems that the dates are not determined properly.
Also check the Transit time, Loading time, Pick/Pack time and Lead time are retained as same as before the technical upgrade. Use the QAS server settings to validate the settings in other servers.
Regards
Rajkumar K

[svn:fx-i11] 5489: i11 branch: Fix SDK-20148 Group bounds do not update after moving a child UIComponent

Revision: 5489
Author: [email protected]
Date: 2009-03-23 10:04:25 -0700 (Mon, 23 Mar 2009)
Log Message:
i11 branch: Fix SDK-20148 Group bounds do not update after moving a child UIComponent
Fix: add a method in GroupBase that's called whenever child x,y changes in UIComponent. GroupBase invalidates layout when autoLayout is true.
QE Notes: None
Doc Notes: None
Bugs: SDK-20148
Reviewer: Deepa
tests: checkintests, mustella
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-20148
http://bugs.adobe.com/jira/browse/SDK-20148
Modified Paths:
flex/sdk/branches/i11/frameworks/projects/flex4/src/mx/components/baseClasses/GroupBase.a s
flex/sdk/branches/i11/frameworks/projects/framework/src/mx/core/UIComponent.as

FYI - This regression has been filed here: http://bugs.adobe.com/jira/browse/SDK-31989

Time/date will not update

After updating software, the time/date will not update. My network is fine and I can get to the internet fine. Also will not accept my apple ID

Try restarting the Apple TV by removing ALL the cables for 30 seconds.

Chart does not update after table changes

Simple X-Y chart using a data series from a table. The chart will not update after changing the table, for example after applying a filter. The chart will update if you close and reopen the file or go to Select Data on the chart. I use named ranges
because you can't use table nomenclature directly in the chart series definition.

Seems to update for me OK. You need to apply the entire unfiltered range to the chart before filtering. Did you do this or filter first and only apply the visible range?
If not the answer to you query then maybe I am not understanding the problem correctly so can you upload an example workbook?
Guidelines to post a workbook on OneDrive
Zip your workbooks. I prefer that you do not just save to OneDrive. (To Zip a file, in Windows Explorer Right click on the selected file and select Send to -> Compressed (zipped) folder.)
Go to this link. https://onedrive.live.com
Use the same login Id and Password that you use for this forum.
Select Upload in the blue bar across the top and browse to the zipped folder to be uploaded and select Open (or just double click). (Be patient and give it time to display the file after initially seeing the popup indicating it is done.)
Right click the file on OneDrive and select Share.
Do NOT fill in the form; "Select Get a Link" on the left side.
Click the button "Create a Link"
Click in the box where the link is created and it will highlight.
Copy the link and paste into your reply on this forum.
Regards, OssieMac

Actual end date is not update after closing a change

Similar Messages

Maybe you are looking for