Actual Expenses transfer One WBS to Another WBS

Dear Sir,
            I want to transfer the Actual Expenses transfer to One WBS to another WBS.
Please tell me how it is possiable.
Moderator: Please, search before posting

Hi Amit,
You can transfer Expenses from One WBS to another WBS by using t-code KB15N.
Select the screen variant "WBS Element".
Enter teh cost element and amount.
Sender WBS element and Receiver WBS element.
You can check these values whether posted in receiver WBS element or not, using t-code CJI3 or KB16N.
Regards,
ADI

Similar Messages

  • HT1491 How Do I Transfer One Giftcard To Another Account?

    I'm not sure how i transfer one giftcard that has already been activated from my old account to my new one?
    If anyone could help, that'd be wonderful! Thanks!

    Then contact her again and ask her how to do it.
    Also, please come back here with the answer to help others.

  • HT204053 How do I transfer one account to another ?

    I had an acct through work which was my employers email. I have since left and created a gmail for my personal. My iPhone 5c accesses my gmail for iTunes but my iPad is still linked to my employer  email I'd #. ??

    Hopefully you haven't created a new Apple ID. You should just change the email address associated with your Apple ID.
    Changing the email address you use for your Apple ID -
    http://support.apple.com/kb/HT5621
    Because if you made a new Apple ID you're screwed.
    Content and Apple IDs -
    Content is forever tied to the Apple ID that bought it. Apple does not transfer content from one Apple ID to another. Apple does not merge Apple IDs. You will never be able to access your content bought with another Apple ID with a new Apple ID.

  • Transfer cost from one WBS to another WBS

    Hi,
    I have transfered Actual Costs from one WBS to another WBS manually using transaction KB11N - Manual Reposting of Primary Cost.
    But in S_ALR_87013542 report, Still the old WBS is visible with No costs.
    What are the consequence of doing the transfer and where it will affect?
    Can i delete the old WBS after transfer?
    Thanks
    Vinoth

    Vinoth G wrote:
    Hi,
    >
    > I have transfered Actual Costs from one WBS to another WBS manually using transaction KB11N - Manual Reposting of Primary Cost.
    >
    > But in S_ALR_87013542 report, Still the old WBS is visible with No costs.
    Once you do a transfer posting system will pass a credit entry (negative value) to the old WBSE. so the net effect will be zero.

  • After Settlement, Cost not transfer from one WBS to another WBS in customer project

    Hello Experts,
    I am trying to settle cost from one WBS (i.e. XYZ-000014-1) to another WBS (i.e. XYZ-00001)in customer project.
    Its a revenue type of project.
    I have added 4 internal activities in an network under one WBS (i.e. XYZ-000014-1).
    Got actual values after confirming activities, then settle that network cost on WBS (i.e. XYZ-000014-1)  through CJ88.
    Now while trying to settle that cost from WBS (i.e. XYZ-000014-1) to WBS (i.e. XYZ-00001) through CJ88, system not showing any result.
    Kindly give ur valuable inputs.
    Regards,

    Kindly tell me that is it a standard functionality of SAP that through CJ88 we can transfer cost from WBS to WBS.
    Technically ,Yes.Cost is actually transferred from one cost object to another cost object.
    I hv discuss the same with some of my frds ...some are denying the same that its not a standard functionality of SAP to transfer cost on same cost object.
    Instead of 'transfer' I would rather use the word 'settlement' . Practically, they are right as projects-WBS are temporary endeavors of companies, and cost can not reside on WBS permanently as it has to settle to some entity (organizational unit) which can be accounted during the reconciliation of their chart of accounts and balance sheets.
    SAP has provided us an option to settle our cost to WBS and hence its standard . Generally, we use it when we have 1 WBS at level 1 and all lower WBS's costs is settled to this WBS . Here, we specify Level 1 WBS as the receiver of cost of these lower WBS.
    Hope,I am clear here.
    Regards
    Saurabh

  • How to transfer costs from one WBS to another WBS?

    Hi,
    I want to transfer costs from one WBS to another. Remember two currencies are maintained viz. local and group.
    So how can i transfer the balance such that both the local currency and group currency balance gets transferred.
    Please ensure that the transfer should show 0 balance outstanding in CJI3 report.
    I need to transfer because WBS is holding some value which was not settled in the previous year.

    Hi
    You can transfer the Amount from One WBS to Another through KB11N. In this you Choose the Screen Variant as "_WBS/Network_" and do necessary steps.
    Hope it helps.
    Regards
    Babu

  • Transfer from one WBS to another WBS

    Hi Gurus,
    I want to transfer actual cost from a WBS to another WBS with the Tcode KSW5 (execute actual periodic reposting).
    In the sender fields I inserted a WBS and a "Cost Element". In the Receiver field Iinserted only a WBS.
    I elaborate the cycle but the mesagge is: "the cycle doesn't include any sender"
    Is there some parameter in the WBS that I have not listed?
    Or is there any problem?
    Thank you very much.
    Lucidissimo

    Hi,
    Why don't you settle the actual cost incurred on the WBS to the required WBS? Search the forum and you will get number of threads on the same.
    Regards,
    Gokul

  • Moving NWA from one WBS to another and consolidated costs under WBS

    HI,
    I'm restructuring the project by moving released NWA from one WBS to another to aling actual costs with new budget categories.
    After moving these NWA I run the report and found out that WBS element summarize costs even if there is no NWA under this specific WBS.
    What field should I enable to allow WBS elements recalculate costs according to new NWA under these WBS.
    Thanks,
    Minsk2000

    Hi,
    Run CJEN to reconstruct project database.
    Rgds
    Abhinay

  • Revenue transferred  from one WBS to Another

    Hi ,
    Is any realationship exists to check the revenue transferred and realted information from one WBS to another.WBS ? The main criteria is -From WBS  to TO WBS  for revenue transfer?
    Thanks
    Anil Kumar

    CJI3 report with the field Partner Object should show you the sender and receiver WBS if revenues have been manually reposted.
    Regards
    Sreenivas

  • How can i transfer the entire itunes program (not the library,but the actual program itself) from one cpu to another? I have the older version that has the slide feature. I can't stand the new itunes.

    HOW CAN I TRANSFER THE ITUNES PROGRAM ( NOT THE LIBRARIES,BUT THE ACTUALLY EXE PROGRAM ) FROM ONE CPU TO ANOTHER. I CAN'T
    STAND THE NEW ITUNES. I WANT TO TRANSFER MY OLD ONE THAT STILL HAS THE SLIDER FEATURE. THANKS

    Sounds like you've already installed iTunes 11 and are now trying to downgrade. To do so successfully you will also need access to a pre-upgrade copy of your library as set out below...
    The main differences between iTunes 11 and earlier versions are the loss of coverflow and ability to have multiple windows open.
    In Windows, you can restore much of the look & feel of iTunes 10.7 with these shortcuts:
    ALT to temporarily display the menu bar
    CTRL+B to show or hide the menu bar
    CTRL+S to show or hide the sidebar
    CTRL+/ to show or hide the status bar (won't hide for me on Win XP)
    Click the magnifying glass top right and untick Search Entire Library to restore the old search behaviour
    Use View > Hide <Media Kind> in the cloud or Edit > Preferences > Store and untick Show iTunes in the cloud purchases to hide the cloud items. The second method eliminates the cloud status column (and may let iTunes start up more quickly)
    If you don't like having different coloured background & text in the Album (Grid) view use Edit > Preferences > General and untick Use custom colours for open albums, movies, etc.
    With iTunes 11.0.3 you can enable artwork in the Songs & List views from View > Show View Options (CTRL+J) making it more like the old Album List view.
    If you still feel the need to roll back to iTunes 10.7 first download a copy of the 32 bit installer or 64 bit installer as appropriate, uninstall iTunes and supporting software, i.e. Apple Application Support & Apple Mobile Device Support. Reboot. Restore the pre-upgrade version of your library database as per the diagram below, then install iTunes 10.7.
    See iTunes Folder Watch for a tool to scan the media folder and catch up with any changes made since the backup file was created.
    tt2

  • Transfer of AUC from one fund to another fund

    We are a governmental entity.  We have assets under construction.  Our Board just approved the official closing of a fund that had AUC.  The AUC needs to be transferred to another fund.   We attempted posting a journal entry where we credited against the WBS element and debited not referencing the WBS element in the closed fund and debited against the WBS element and credited not referencing the WBS element in the transfer to fund.  Then, we went through the settlement process.  The CIP moved from one asset sub-number to another asset sub-number.  However, the value did not move from the closed fund to the other fund.
    Does anyone have any suggestions as to how to accomplish this transfer of AUC from one fund to another?

    Karl,
    All but one of your assumptions is correct. The original WBS element is not yet closed.
    Here is what we have...
    WBS1 settled to AUC1
    We need to transfer the value of AUC1 in FundA to AUC2 in Fund2 so that we can close FundA.
    Can you elaborate on your statement... "create a settlement rule for WBS with the old receiver "AuC"."?
    Is it possible to transfer from one AUC to another AUC in different funds using ABUMN?
    We did performed a test1 where we credited WBS1 and debited WBS2, and ran through all of our processes (AS11_FMIM, CJ8G, ASKB, AFABN). AFABN should have did the following...
    DR Investment in Fixed Assets for FundA
    CR Investment in Fixed Assets for FundB
    and
    DR AUC settlement GL account for FundB
    CR AUC settlement GL account for FundA
    But only entries for FundB were created. We were able to successfully run all processes and post all entries correct for two other WBS elements that we selected in another test. We thought that there was a probem with the master data setup of WBS1 because when we display it and look on the "Assignments" tab, Object Class is set to "Overhead" instead of "Investment". Would this be causing our problem? Thanks for your help.

  • Transfer of WBS to Operative Structure

    Dear Experts.
    I have come across a unique scenario where i have a WBS element which is carrying actual cost and commitment cost in it. Now the user needs this WBS element to be transfered to other operative project.
    Do we have any way where we can transfer this WBS element without affecting the cost in it. Even we are not using any settlement in this project.
    is there any way we can tranfer with or without the cost in it.
    Reply at the earliest will be appreciated!
    Thanks and Regards
    Praveen B M

    Hi,
    I suggest, you can create a required WBS in the relevant project and do the actual cost transfer using KB11N (WBS to WBS option). For committments you just need to change the account assignment in the origin object to the new one. Do mark the current WBS as closed and keep it to address the reporting requirements in future.
    Regards,
    Neeraj

  • CProjects (with subprojects_ - replicate on PS under one WBS

    We are on PPM5.0.
    We plan to use subprojects in cProjects which meets a requirement that we have. We are now required to have this entire set (the main project with subproject) to be replicated under one WBS in PS. Is this possible? How?
    We may be required to use a few subprojects, and one subproject may be linked to another subproject. And the business needs the entire set up to replicate under one WBS in PS (when "Flagged for Transfer").
    Please advise.

    Hi Deepak,
    that's not possible by standard means. The automatic MLC scnearios always work for one project w/o subprojects. I think it could be developed / enhanced, but you will need someone with good technical skills in MLC
    Best regards
    Thorsten

  • How to transfer file from one client to another client?

    hello,
    i have some questions and hope you all can help me..thanks a lot first..
    Here are the questions:
    i) How can i send a file from one client to another client using RMI?
    ii) Does the client(sender) need to send the file to server, then server save it and then send it to another client(receiver)?
    iii) If using RMI, a client can receive two files from same client(sender) or different client(sender) at a same time? how to do it? when both of the files come in from same port, how to differenciate them?
    iv) For your information, i am doing the File Transfer Server-client application which sender can send any file to other client. Can you give me any ideas? thanks..
    Last, thanks again..

    Your questions reflect some ambiguity in terms.
    "Client" and "server" are commonly used in two different senses:
    1. Technical sense: A client process makes requests, and a server process fulfills the request (provides a service).
    2. IT sense: A client computer (process) makes requests of a server (computer) process, and the server (computer) processes the request.
    In the first case, any computer might be a client, or a server, or both, depending on the processes being executed. In the second case, the computers are assigned some role.
    So: If you wanted to, you could implement client/server processes communicating between two peer computers, using RMI.
    This may not be what you wanted; if you really want to distinguish client and server computers, then the answer is that yes, you will probably put files into intermediate storage on the server computer.
    Finally, you probably do not have to worry about port conflicts if you use RMI; while the initial client server contact is established through a registry operating on a standard port, the actual RMI communications is established using random ports, one for each link.

  • Transfer data from one database to another without identities but keep the relation b/w PK and Foreign key

    Hi,
    I need to transfer data from one database to another database (both are identical databases). 
    1. Not transferring identity columns (primary keys). the destination table might have the same key.
    2. keep the PK's and FK's relation b/w parent and child table
    3. I have 4 levels 
    Example: tableA (col1 int identity(1,1) , col2, col3)
    tableB (col1 int identity(1,1) ,
    col2 , col3) -- col2 has the foreign key relation with tableA.col1
    tableC (col1 int identity(1,1) ,
    col2, col3) -- col2  has the foreign key relation with tableB.col1
    tableD (col1 int identity(1,1) , col2, col3) -- col2  has the foreign key relation with tableC.col1
    please advise me.
    Thanks in advance

    Try the below:
    /********************************SAMPLE TARGET***************************************************************/
    Use MSDNSamples
    create table TableA(LevelValueId int identity(1,1) primary key, name varchar(100))
    Insert into TableA(name) Select 'R1'
    Insert into TableA(name) Select 'R2'
    create Table TableB(ChildId int identity(100,1),name varchar(100), LevelValueID int references TableA(LevelValueId))
    Insert into TableB(name,LevelValueID) Select 'Childname1',1
    /********************************SAMPLE TARGET***************************************************************/
    /********************************SAMPLE SOURCE***************************************************************/
    Use Sample
    create table TableA(LevelValueId int identity(1,1) primary key, name varchar(100))
    Insert into TableA(name) Select 'C1'
    Insert into TableA(name) Select 'C2'
    create Table TableB(ChildId int identity(100,1),name varchar(100), LevelValueID int references TableA(LevelValueId))
    Insert into TableB(name,LevelValueID) Select 'Kidname1',1
    /********************************SAMPLE SOURCE***************************************************************/
    USe MSDNSamples
    /********************************MIGRATION INTERMEDIATE TABLE***************************************************************/
    --Migration table
    Create table Mg_TableA(LevelValueId int, NewValueId int)
    /********************************MIGRATION INTERMEDIATE TABLE***************************************************************/
    /********************************ACTUAL MIGRATION FOR MASTER TABLE***************************************************************/
    MERGE INTO TableA
    USING sample.dbo.TableA AS tv
    ON 1 = 0
    WHEN NOT MATCHED THEN
    INSERT(name) Values(tv.name)
    Output tv.levelValueId ,inserted.LevelValueid INTO
    Mg_TableA;
    /********************************ACTUAL MIGRATION FOR MASTER TABLE***************************************************************/
    /********************************ACTUAL MIGRATION FOR CHILD TABLE***************************************************************/
    Insert into TableB (name,LevelValueID)
    Select A.name,B.NewValueId From sample.dbo.TableB A
    Inner join Mg_TableA B on A.LevelValueID = B.LevelValueId
    /********************************ACTUAL MIGRATION FOR CHILD TABLE***************************************************************/
    /********************************TEST THE VALUES***************************************************************/
    Select * From TableA
    Select * From Mg_TableA
    Select * From TableB
    /********************************TEST THE VALUES***************************************************************/
    Drop table TableB,Tablea,Mg_TableA
    Use Sample
    Drop Table TableB,Tablea

Maybe you are looking for

  • How can I have mozilla firefox start at bootup, rather than having to click on the desktop icon to get it running?

    I do the usual turn on and bootup of the computer. Then I have to click on Firefox, and wait. Is there a way to add firefox to the bootup in msconfig? I couldn't figure out how. I am not a blond, but have white hair.

  • Error: Screen output without connection to user

    Hi, I am trying to add a new mime object using the following call: CALL METHOD mime_repository->put       EXPORTING         i_url                     = url         i_content                 = lv_file_content         i_check_authority         = ' '   

  • P and V Getter not called for custom attributes!

    Hi, i implemented a new search structure instead of CRMST_QUERY_SLSORD_BTIL for business transaction search. I enhanced the new structure with a custom field and generated v and p-getter methods to have a dropdown listbox. Unfortunately the p and v g

  • New Isight G5 20"

    Greetings All; I have had my new MAC now for 3 weeks and thought I would post my impressions so far. I have been using MAC for about 20 years now and in my experience apple has done a fantastic job. My G5 runs silent, I can't even hear the fan. I hav

  • Action Box-Reg

    Dear Guys, In Spro(related to Notification Config),Can anyone explain me the practical usage of Define Action Box-Define follow up functions. regards KRISHNAN