Actual sales figures against planned figures

Hello,
I had a question regarding SOP. Can we have actual sales figures to appear against planned value in the information structure?. If so how do we accommodate it?
THis is so that the planner can see for the past year what has been the planned sales and what has been the actual sales.
Sincerely
Aji

Hi Aji
The actual sales figure can be appeared in planning type (MC8B) . Place the cursor on the sales key figue and goto Edit-.Actual data prev year (Ctrl+F1)
Regards

Similar Messages

  • Sales order against planned order

    Friends,
    We are using currently Make-to -order scenario.
    So here one project has contains "n" number of semi finished products.
    and sales order is for only one project.
    Is it possible to create "n" of planned order against one sales order?
    If it is possible then how?
    pl. guide

    Sandy,
    Is it possible to create "n" of planned order against one sales order?
    Yes its possible by giving Indiv/Coll req as "1" in MRP 4 in Material Master.
    If it is possible then how?
    You need to maintain the BOM for the finished Product. And run MRP - MD02 the demand will generate for all the components.
    Hope this helps.
    Regards,
    Sundhu

  • Reporting for PIRs: actual consumption against plan

    Hi all,
    can you recommend what standard reports can show actual consumption figures against plan in PIRs. Collective report is needed, looks like rows with columns for material code, plan figure, consumed figure and this is for given periods. And plan figure should be quantitiy without reduction quantities (that is initial quantitiy in PIR).
    Thanks in advance!

    Vivek wrote:
    I would still suggest, use the report (shouldn't take more than 30 mins. of your time) & it would greatly help in your 'estimation effort'.
    Thank you for your suggestion.
    I can start this transaction (MD73) and see some figures, but cannot make GI due to some reasons in existing environment (migo goes into dump). That is why I'm asking about reduction, what results will be showm by this report - planned figures as originally planned or reduced ones after issuing.

  • Actual Sales Figures

    Hi,
    I need to get a actual sales figures for a forcasting report, which is a customize report.
    I need the figures by material.
    From VBRP , I think it can be taken by calculating from the begining. But it will give me a performance issue in the report.
    I need to know is there any function or any faster way of getting the Actual sales figures by month, by material.
    Pls help me to resolve this issue.
    Regardrs
    Thanura

    Hi Prabhu
      I guess you are referring to SIS(Sales Information System).
    Kind Regards
    Eswar

  • Previous year figures in planning book

    Hi all,
    I want to show the previous year figures in the planning book.
    According the help documentation of planning books it must be possible to add actual data and previous year figures (Demand Planning - Demand Planning Process - Planning book design - Planning book: "Add rows containing actual data from the current year and/or the previous year").
    Actual data is easy by refering to 000 version. But how can I add previous year data?
    Thanks for your help
    Jean

    I think what it means is that if you go to the dataview tab in the Planning book design you can see a field called Initial Column.
    If you use initial column you will be able to add all the buckets in the period previous to the first future period. Its not necessarily last year but previous periods.
    (though i dont understand what you menat by seeing actual using 000 version)
    It makes more sense in an SNP planning book for a KF like Stock
    as the help says...
    "The initial column covers the time span from 1970 until the beginning of the first future period minus 1 second. The data is read from a key figure that is stored in liveCache orders or liveCache time series. However, you can also populate this column with data using a macro, such as has been done with the Initial stock key figure in the standard Supply Network Planning data view.
    Enter one of the following values:
    Blank - No initial column
    L - The initial column is displayed on the far left of the table.
    R- The initial column is displayed on the far right of the table.
    C - The initial column is displayed between the past planning horizon and the future planning horizon."

  • Planned Figures in COPA Reports

    Hi,
    While we are able to capture the actual figures in the COPA Reports, we desire to key in the planned figures also in the COPA for comparing the actual with plan.. What are the relevant value fields for the same and how do we maintain the characteristics for entering the planned figures in COPA.
    Would appreciate assistance in this regard.
    Thanks in advance.
    Rgds

    Hi Ashok,
    Thanks for the feedback, Would you explain a bit more as to how to create the Transfer Structure. Or else if there is a documentation would you be able to pass on the same to me.
    Thanks in advance.
    Rgds

  • Integrated Planning - Navigation attribute not shown for Planned figures

    Hello,
    I have created a Input ready query to get the actual figures from previous years and enabling users to enter the planned figures. I have created Planning functions to copy and revaluate.
    Reg   Account    Actual         Planned
    US         123000     $3000         $4000
    US         124200     $5000         $6000
    I have one more report where it shows the Actual & Plan comparision.
    In the Actual & Plan comparision report I have an additional Navigational attribute SIC code to be shown  for each account.
    My Actual & Plan comparision report should ideally be seen like below.
    Reg   Account    SIC  Actual         Planned  
    US         123000      3026         $3000         $4000
    US         124200      4325         $5000         $6000
    But it is showing as below where it has # for Planned figures and it shows blank.
    Reg   Account     SIC   Actual         Planned  
    US         123000      3026         $3000         <blank>
    US         123000      #              <blank>       $4000
    US         124200      4325         $5000          <blank>      
    US         124200      #              <blank>        $6000
    SIC Code is a navigational attribute of account. What changes do I have to do to make the SIC code to be shown for planned figures.
    Any help would be highly appreciated and rewared.
    Regards,
    KK

    I figured it out. I didnt assign the navigation attribute to the plan cube in the multiprovider. Thanks!!
    Edited by: KK on Feb 19, 2008 10:12 PM

  • Copy of plan figures KP06

    Hello
    Does anybody knows whether it is possible to copy the plan figures for a cost center/group in 2008 to 2009 with a percentage surchage? I know it is possible to copy figures from one year to another via KP97.
    Thanks in advance
    Best Regards
    Søren Kirch

    Hi
    After copying from year 2008 to 2009 goto TCode KP06 and enter your parameters and then select the line items and then select change values button and enter your revaluation factor say 125% and select revaluate button and then SAVE
    Cheers
    Srinvias

  • Uploading cost element cost planning figures

    Dear PS Masters,
    How can we upload the cost element cost planning figures in Project System instead of entering them manually in transaction CJ40

    It would be better if you could get in touch with your ABAP guys and ask them to help you out in this. Else you could search the internet and you will find lot of links that explain LSMW step by step.
    Better consult your ABAP consultant.

  • Automatic plan figures updates at Profit Centre level.

    Hi,
    I would like to know whether do we have any scenario like Automatic Plan figures updates at Profit Centre Accounting level when we do Cost Centre planning.  The Profit Centre should be picked up by the system automatically from the Cost Centre master. 
    Of course, here the Cost Centre to Profit Centre relationship is 1:1. 
    If anybody come across the above required scenario, please let me know how to achieve it.
    Thanks for your inputs well in advance.
    Note: I know we can copy the Cost Centre plan figures to Profit Centre level by using copy function.
    Regards.
    Chandra

    Hi
    In version maintenance, you need to tick integrated planning....
    In PCA, create the doc types for planning and maintain no ranges...
    Also, if you are on New GL and you want to use New GL planning, you need to do settings in new GL menu for the same... assign version to ledger, fiscal year , etc
    last month there were couple of threads on it .. Refer this link for new GL planning settings
    Re: Buget Upload, Planned values-KP06
    Regards
    Ajay M

  • Product hierarchy wise Target sale v/s Actual sale report

    hi
    i have a BILLING ITEM cube which contains Actual sales fig. I also want to develope a cube in which i have Target sales fig. Product hierarchy wise. i have the product hierarchy wise data in an excel sheet. my questions are
    1. how can i develope a cube containing the product hierarchy wise data.
    2. how to develope a multiprovider using the above cubes so that when i will write query on the MP, i will be able to get report like
    Product hier         Target sale                 Actual sale
    Fans
    |- Ceiling Fan          1000                             9000
    |- Exhuast Fan         800                               850
    pls help. its urgent. if able to give any sample example of the above queries to refer, it will b a great help.

    Hi,
    Why don't u put ur product hierarchy in column on top of key figure, query will fetch the amount for each hierarchy value.
    try this it might help u.
    Rajesh

  • Independent Requirements Withdrawal Qty against "Planned Ship From"

    I have a user request to change the Withdrawal Qty of Sales Orders against Independent Requirements, to reduce the Independent requirements at the Planned Ship From rather than the Actual Ship From.  I have looked through configuration settings and have not been able to find any place that allows you to say how to reduce the requirements based on the sales order Ship From.  Does anyone know of a way to do this without custimizing a program?
    Thanks,
    Susan Hoppa

    Hi Susan,
    I guess that by Ship from you mean the plant from where the goods are delivered.
    In your case you have (at least) two plants, and the order is received for plant A (where you have probably maintained PIRs), but it is changed to plant B. The problem now being that PIRs in A don't get consumed.
    I've encountered the same situation, and have not found a solution.
    The only work around I came up with (didn't make me happy though), was to create a SL of plant A representing plant B. Then if I wanted to deliver from B, I would first transfer the stock from B to that SL of A, and deliver from there. This way we actualy deliver from B (as a geographical location), but systemwise from A, and consumption is OK.
    Regards,
    Mario

  • Actual SKF (KB31N)  vs Plan SKF (KP46)

    Hi,
    Currently we are using tc: KP46 planning SKF and  in our assessment and distribution cycles  also we are using '6.Plan stat.key figures' in receiver tracing factor.
    If I want to discontinue using KP46 and use KB31N, do I need to change the receiving tracing factor in all the cycles to '4.actual stat.key figures', any implications.
    I want to know what is the purpose of tc KB31N -Actual SKF?
    Thanks
    Suresh.

    difference between actual SKF (KB31N) and Plan (KP46) is that Actual SKF posts the actual values on paticular recievers and planning through KP46 is done just to get the variance reports.In beginning of year or period planning is done because Actual/Plan version reports are possible only if both actual and plan data is available in the system.
    thanks
    deepa

  • Link between process order and sales order for planning strategy 52

    Hello,
    I investigate the possibility of a link between "sales order" and "planned order / process order" for the usage of planning strategy 52 (planning w/o final assembly, make to stock).
    I know, this is not conform to the basics of planning strategies (EITHER make to order OR make to stock) and I suspect it would be a modification. Of course we have the alternative "make to order" - strategy 50, but we do not want to use individual customer stocks.
    Is anybody there with similar customer requirements or project experiences?
    Thanks in advance,
    Joerg
    Message was edited by:
            Jörg Demtschuk

    Hi Jorg,
    To my understanding if you need hard pegging then in SAP only Individual requirement is possible.
    Or else you need to create a custom transactions/table to identify Sale order and when ever a process order is created by selecting the sale order record, the process order detials should also get updated against that.
    You need to take the help of ABAP expert for this,
    Regards,
    Prasobh
    Reward points if this was useful

  • Actual Sales Vs Targetted Sales

    Hellow Experts,
    My Client  requires the Sales Office wise, Actual Sales Viruses Targetted Sales Report.  We have the targets of each Sales Office for the year.  We want a report as below......  Input 1) Period - From Date- To date 2) Sales Office - <default all> 3) Division - <default all>4) Plant - 5) Company Code - 6) Gross Sales / Net Sales -
    Output  1) Sales Office Code & Name 2) Month - a) Sales b) Target Sales c) Variance 3) Total - a) Sales b) Target Sales c) Variance, do nayone have any idea about the tables to be used in processing logic......if so please let me know......
    Any help would be appreciated. Thank you..........

    Hi,
    First you have to create planning
    SAP menu >> logistics >> SD >> Sales information system >> planning >> flexible planning
    Here you can set montly or yearly targets
    Then create Z report which will compare data from above planing tables and actual sales from table VBRK,VBAP
    kapil

Maybe you are looking for