Actual Time bar for the activity duration in Gantt Chart

Hi all,
The Actual time bar for the elapsed activity duration in Gantt chart is not appearing. The same is true for all the activities i.e. activities which are not yet confirmed and activities which are partially confirmed.
Is there any customizing for the same? ( I am getting the bar in IDES, but not in DEV/QAS/PRD )
Any Help in this regards will be highly appreciated
Warm regards,
Srinivas Potluri

Hai Srinivas
Got the solution.
1)For this first check in the project profile of the Hierarchry graphic -
Time scheduling profile - check the colour patterns which been assigned.
2)open the project - Cj20N - go to planning board - bar chart - under settings - Planning board assistant - Gantt chart - check the dates display for Project definition , WBS , Acitivity - try to change the colour and check.
while changing can see - basic date of the acitivity. based on the confirmation can see the bar confirmed activity with respect to basic date. the bar confirmation will show withrespect to duration.
3) If the bar chart need in daily /hourly - can check in CNE5 . click on the graphics -bar chart - which u will get the bar chart - in this choose the Time Axis - where can select the monthly /weekly/daily /hourly format .
Award points if clear and got the solution.
Regards
PP

Similar Messages

For some reason, I cannot change my desktop background no matter how many times I delete the "active" folder. It's as if it's locked. Any ideas how I can fix it?

For some reason, I cannot change my desktop background no matter how many times I delete the "active" folder. It's as if it's locked. Any ideas how I can fix it?

Yes it sounds like you have a corrupted preference file.
The setting you make in individual programs get saved to a Preference file in your Users/Library/Preferences folder.
All you have to do is drag out the old file to the desktop, reboot and load the program and the preference file gets rebuilt without your preferences which you reset.
For your case I beleive the preference file is
com.apple.desktop.plist

I have had elements 10 for a long time but recently the scroll bar for the fonts has disappeared. any ideas?

I have had elements 10 for a long time but recently the scroll bar for the fonts has disappeared. any ideas?

First try resetting the tool by clicking the tiny arrow at the far left end of the options bar and choosing reset tool.
But you should be able to use the arrow keys to navigate through the fonts, too.

After updating to the latest version of Firefox on my Mac there is no progress bar for the page load. I really miss this feature and can't seem to find a way to obtain it.

The page load progress bar that was on the lower right of the window is no longer there. After updating to the latest version of Firefox on my Mac there is no progress bar for the page load. I really miss this feature and can't seem to find a way to obtain it. The tab has a circular progress wheel but this is useless for determining a stuck or slow loading page.
PLEASE NOTE: I am typing this in from a Windows based work computer but am asking about my Apple MacBook Pro that i use at home.

Firefox 4 saves the previous session automatically, so there is no longer need for the dialog asking if you want to save the current session. 
You can use "Firefox > History > Restore Previous Session" to get the previous session at any time. 
There is also a "Restore Previous Session" button on the default about:home Home page. 
Another possibility is to use:
* [http://kb.mozillazine.org/Menu_differences Firefox (Tools) > Options] > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"

Time Frame for the document

Hi,
I am working on Home -> Top News i used SAP Demo news to display the content on news ivew. I want to display news content for the specific duration for which i already enabled Time Stamp option for News Folder under Content Manangement. I event set the validity day and time for the document but still the content is appearing on the news iview even validity time expires.
I also made the Document in read only mode.
Please Help me on this.
Thanks and Regards
Parth

Hi Parth,
Everyone is a built-in group that contains all the users. you can see it in the Identity Management if you pick Group from the Select Criteria.
Some basic reading:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/81/0e0f61b566dc44bbb4055b3ccd25be/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/81/0e0f61b566dc44bbb4055b3ccd25be/frameset.htm</a>
Let me see if I understand,
You want everybody to be able to create a news item but then you want the items to disappear after a certain time? This is a bit tricky since you want users who created the item to have only read permission on it. you will probably have to implement a custom repository service for that. This reqiuers coding. let me know if that is what you want.
If you want a scenario where some users create items and the rest only read them, adjust the permissions on the folder level: assign write permissions to the item creators and read permissions to everybody else.
Best regards,
Avishai Zamir

Drag JTabbedPane out of the main Frame and set scroll bars for the tabs

hi ,
Iam working on a Swing application . In it i have Six Tabs added to a single JTabbedPane. all the tabs are different class files . is it possible to drag any of the tabs out of the frame.
how to add scroll bars for the tabs individually. i have tried adding JScrollPane to the main frame and add the JTabbedPane to the Scrollpane . the scroll bar was not visible and i have tried adding
all the six tabs to the individual JScrollPanes and add the six scrollpanes to the TabbedPane .
only the scroll arrows are visible , when i minimised or resized the application the scrollbars were not appearing .
could any one help me to solve the above two problems.

just trying.....
public void mouseDragged(MouseMotionEvent e){
// this event should be activated only when the Drag goes out of scope of the parent JFrame which i dont know how
Component c=JTab.getComponentAt(JTab.getSelectedIndex());
JFrameobj.getContentPane().add(c,"Center");
}

Planned time Vs Actual time report for activities

How I can get 'Planned time Vs Actual time report for activities( std values like setup , machine , labour ) ' ?

Hi,
   From the tcode co28 choose op/sub op
   Choose the profile as 000001and enter your order number
   Execute.
   Select the op and choose ALL FILEDS ICON.
   From there you can get the planned standard values and the actual standard
   values.
Regards,
nandha

I used an ethernet cable between my iMac and Time Capsule for the initial backup. Now that initial backup is concluded, can I simply unplug the Time Capsule from my computer?

I used an ethernet cable between my iMac and Time Capsule for the initial backup. Now that initial backup is concluded, can I assume I can simply unplug the Time Capsule from my computer without any glitches and Time Capsule will then run wirelessly. Is this assumption correct?

can I assume I can simply unplug the Time Capsule from my computer without any glitches and Time Capsule will then run wirelessly. Is this assumption correct?
Yes, if the computer will be able to receive a strong wireless signal from the Time Capsule.
I did not disable wireless. So I assume the backups are occurring both with the ethernet and wirelessly.
It is inot possible to have both an "active" Ethernet and "active" wireless signal simultaneously. If an Ethernet connection is established, your computer will default to the Ethernet connection. If the Ethernet cable is unplugged, the computer will revert to the wireless connection.
I also show 2 wireless networks available through Airport. Shouldn't there only be one now?
You have a simultaneous dual band Time Capsule. That means that it will always be providing both a 2.4 GHz and a 5 GHz network.
I named my new network the same name as the old network. This enabled all of our devices to continue with their connection without entering the new network and/or passwords; however, I am afraid this may pose problems in the future somehow. Any input on this issue as well?
Things should be fine. Devices will connect to the best signal.....either 2.4 GHz or 5 GHz....based on their capabilties and location in relation to the Time Capsule.

Total time taken for the quiz needs to be displayed in the report

Hi,
I would want tthe total time taken for the quiz to be displayed in the report...Let me know if its possible

Hi,
Please try this.
Define three user variables - StartTime, EndTime and Duration.
At the start of the quiz ('On Slide Enter' of the first Question Slide). have an advanced action with the following actions.
Assign: StartTime with cpInfoElapsedTimeMS
Continue
At the end of the quiz ('On Success' or 'On Failure' of the last Question Slide or 'On Slide Enter' of Result Slide), have this advanced action.
Assign: EndTime with cpInfoElapsedTimeMS
Expression: Duration = EndTime - StartTime
Expression: Duration = Duration / 1000
Continue
The variable 'Duration' will have the time taken by the user for the Quiz in seconds.
Let me know if you have any queries.
Thanks,
Thejas

Unable to run time evaluation for the entire year...

hi experts,
I'am unable to run time evaluation for the entire year, even though mentioned the date as Force calculation as of : 01.01.2010
and evaluation upto date : 31.12.2010. when time evaluation is run , the log is only run for Jan 2010.
Maintained IT2011 from 01.01.2010 to 31.12.2010
IT0050 from 01.01.2010 to 31.12.9999
IT0003 : PDC recalculation : 01.01.2010
Kindly advise.
Regards
Pammi

Check if Time Management status is 1 or 9....
If it is 1 then it would not run for the entire year..It would run only till today. If it is 9, then the TE runs for future also...also check if in the schema it is activated for future runs or not...

Memory could not be allocated for the activation process. Please close all applications and try agai

I have just had a Windows XP failure and took the opportunity to replace with Windows 7. After I reinstalled PhotoShop CS(1) the message "Memory could not be allocated for the activation process. Please close all applications and try again" is shown and forces PhotoShop to close. I have 4Gb of Ram installed and a total of about 10Gb of Page File space on three partitions of a 500Gb HDD. The system is not heavily loaded! However, I cannot access Photoshop to check scratch disk allocation. How to fix???
Back to top

Yes, there are many forums, and it can be confusing. Your question has the best chance of being answered if it is in the proper place. I think it is there now.
Pattie
http://forums.adobe.com/message/5092533#5092533 is your post address
Download and installation forum:
http://forums.adobe.com/community/download_install_setup

Memory could not be allocated for the activation process. Please close all applications and tr again

Hello,
Just purchased a new laptop:
Intel Core 2 quad
4gb memory
1000 HDD
Photoshop CS 8.0 disc dead/scratched/unreadable. So I copied my Adobe folder from my Program Files Folder on my PC and pasted on laptop. When I try and run PS I get the error message "Memory could not be allocated for the activation process. Please close all applications and try again". Which I do then Photoshop closes.
Can anyone help (in layman terms please)?

Not really. You are essentially FUBARd. Without a proper install, there is usually no way on to get the licensing stuff working. You might be able to get there by installing any other CS product, so PS could latch on to the licensing system that would be already in place, but otherwise it's a lost cause. Simply copying over the executables is normally not enough. I will admit though, that I skipped CS, so there may be some tool somewhere that I don't know about can do this post facto...
Mylenium

Memory Could Not Be Allocated For the Activation of PhotoShop

CS2 Intel P4 3.0GhzHT, 3-4GB Ram WinXP
Photoshop won't open for me. It used to. Any idea how I might fix this?
When I try to open Photoshop, I get "Memory could not be allocated for the activation process. Please close all applications and try again."
I've done this with no applications after a fresh reboot and get the same message.
It only started recently. Photoshop used to open for me and was usable.
I got 3 or 4 GB of ram. I can't remember, but WinXP only sees about 3GB anyway. Either way should be more than enough, no?

Lee71 wrote:
hey john, thanks for resuscitating the topic. I on XP and it’s PS8
I have defragged, cleaned disc, etc.
In terms of symptoms, PS opens up and once open the prompt comes up. I hit okay and it shuts down.
i have tried CTRL + ALT + SHIFT whilst PS boots up; i get the prompt "ÿou currently have Adobe Photoshops primary Scratch and Windows' primary paging file on the same volume, which can result in reduced performance. It is reommmended that you set PS Primary Scratch Volume to be on a differrent volume, preferably on a different physical dirve."
I guess this means reinstall, partition and set up on a partitioned drive? I don't particularly want to take this course of action if there is an alternative. It doesn't make sense given I've got plenty of space.
No no need for that!
The message about the scratch drive is normal: the CTRL + ALT + SHIFT resets the preferences to the default for a single HDD. If you have more than one, go into Edit > Preferences > Performance and set the primary scratch drive to the one without the paging file.
Once you have OK'd that message it should go away if you do only have one HDD.
Partitioning will not do anything. The object of the separate drives (if you have them) is to avoid conflict between Scratch and Page file.
Do you still have your original problem?

I am backing up to my time capsule for the first time. It has been stuck on 348mb of 20.1 gb for days. Is this normal or is the machine not functioning correctly?

I am backing up to my time capsule for the first time. It has been stuck on 348mb of 20.1 gb for days. Is this normal or is the machine not functioning correctly?

That seems to be OK via WLAN!
It ist better to do the first backup via LAN-cable.

I recently moved my Aperture Library file to an external hard drive. Can I now create a vault to be saved on my Time Capsule for the Aperture library on this external hard drive?

I recently moved my Aperture Library file to an external hard drive. Can I now create a vault to be saved on my Time Capsule for the Aperture library on this external hard drive?

One thing to bear in mind, if you are using Time Machine on your Time Capsule and have it set so the TM backup includes your external drive, you will effectively be backing up your Aperture library twice on the same drive, once with Time Machine and once with the vault. This isn't a problem unless you start to run out of space.
Another thing to note, vaults on network drives used to be flaky (i.e. not really supported) and required workarounds to be able to use them. I'm not sure if this has changed, but I just managed to create a vault on my TC ok.

Actual Time bar for the activity duration in Gantt Chart

Similar Messages

Maybe you are looking for