Actuals are not updating in PPB

Dear all,
I am getting an issue related to PPB. After posting partial confirmation on activity i am trying to see the actual at gantt chart by selecting the actual in set of dates/ view. I also saved the setting for ppb and select actual date there but still i dont see yellow update on activity. It was always working before and here also i am using standard syste.
Please suggest is there any setting i might not know need to be updated.
Thanks a lot.

Hello ,
Please check following SAP notes if can help you
500933 - Proj.plng board: Recomm., additional information, consulting
702965 - FAQ 2: Project Planning Board
Regards
Tushar

Similar Messages

GR's are not updating "Actual" Value under the limit tab in PO

Hi Friends
Can anyone tell me the possible solution for GR's value are not updating in the "Actual" Value under the limit tab in the service PO.
Thanks in Advance

Hi,
I hope this is a service PO with item category D and the GR you mean is the service entry sheet.
Do you have an entry in the Purchase order history for the PO for this?
Do you have an acceptance for the service entry sheet which is complete?
Best regards,
Sridhar

Changes to BI web templates are not updated

Hello BI Experts,
I need to find a way to advise my portal resource on how to resolve a problem we are experiencing.
When we make a change to a web template, the changes are not updated and it appears that the old version is cached. The only way we can get the new template to show is to bounce EP.
Does anyone have suggestions where we can find the appropriate global settings to set the cache so that EP will retrieve new BI content as it is modified?
Thanks in advance for any help.
Tom

Hi Tom,
If there is some incorrect setting in the portal, the WAD templates does not get saved after the first Save action.
I am not sure of the setting which needs to be done. But I can provide you an alternate solution. If there is no other issue than the templates not getting saved, you can use this.
You can save your changed template using 'Save As' in a different name and then you can delete the original template. Afterwards, you can save this template with the actual name.
I hope this would solve your problem.
Regards,
-Neethu

Actual Cost not updating to Network Activity from CATS

Dear All,
Am back here for the expert suggestions / guidance.
I am facing issue with respect to system not updating the actual cost in network activity / projects posted through time sheet i.e. CATS. I have planned my resource cost through work centre assigned with activity type, formula and cost centre. I have kept the employee master data in place with maintaining the 315 infotype. In CAT2 i am posting the respective time sheet on the particular network activity and am transferring the cost into projects by CAT5, the plan cost is getting updated but actuals are not hitting the projects.
Kindly do the needful and suggest me if am missing something out of the track
Thanks
Praveen Mohanachary

HI Gokul,
There wasn't any error during confirmation and i have also checked in CN30 as well as COFC transaction. It is posting the time and the activity is getting the PCNF status set but there isn't any actuals posted. I used CATA for some activity and also used CAT5 for certain activity both are not posting actuals on projects.
Thanks
Praveen B M

ITunes: podcasts are not updating automatically

Hi,
My podcasts are not updating automatically in iTunes as they as they should.
My Mac and iTunes are running 24/7, so iTunes it always running. The update interval of the podcast is set to hourly, latest iTunes, latest Mac OS X.
The podcast actually does update if I re-start iTunes or, if I manually update the podcasts (there is always the latest 1 or 2 daily episodes of say NBC nightly news available, but not yet downloaded)... (but this is not a great solution as I am using iTunes through Plex, the Mac is mor a TV/Mediacenter for my family; Plex can access playlists and podcasts in iTunes, but obviously it cannot trigger iTunes to update, so I have to go out of Plex to update iTunes, very annoying)
How can I ge my my podcasts to be downloaded automatically by iTunes.
Thank you for any help!

Here is a screenshot of the phenomenon/problem... NBC Nightly News is not updated, even both the computer and iTunes are running constanly. Once I click update podcast, the podcast updates, so there is an update available.

New tabs are not updating the names of the sites they have loaded. When I open a new tab and load a site, the tab simply stays named "New Tab". When I open a link in a new window, it shows "Connecting..." even while its fully loaded.

New tabs are not updating the names of the sites they have loaded. When I open a new tab and load a site, the tab simply stays named "New Tab". When I open a link in a new window, it shows "Connecting..." even while its fully loaded.

This issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]

HT201269 My iphone contacts are not updating to Icloud, I can create a contact in Icloud and it will update to my phone but I cannot create a contact on my phone to have it update in the cloud, I am using Itunes as the bridge

My iphone contacts are not updating to Icloud or Outlook, I can create a contact in Icloud/Outlook and it will update to my Iphone but I cannot create a contact on my Iphone to have it update in the Cloud/Outlook, I am using Itunes as the bridge. I originally installed the Icloud manager to sync my contacts to Cloud/Outlook, but I did not like the functionality, when I uninstalled the Cloud manager and and installed Itunes I noticed that the none of my contacts in the phone updated to Outlook.
Thanks in advance.

Hi Cyclops12,
Welcome to the Support Communities!
The article below may be able to help you with this.
iCloud: Troubleshooting iCloud Contacts
http://support.apple.com/kb/ts3998
Cheers,
- Judy

HT5622 My apps are not updating as I have no longer access to my eariler apple Id and now I am using a new apple Id which is allowing to download apps but while updating those apps my iPod wants eariler apple Id password to update what should I do ?

My apps are not updating as I have no longer access to my eariler apple Id and now I am using a new apple Id which is allowing to download apps but while updating those apps my iPod wants eariler apple Id password to update what should I do ?

Hi Kanishk,
Those apps are forever tied to the Apple ID they were purchased under. You can either delete them and re-purchase them, or you can go to Manage your Apple ID and reset the password on the old Apple ID so you can use it to update your apps: Apple - My Apple ID
If you decide to continue to use them under the old ID password, I would suggest that when you reset that password, you change it to be the same password as the one you are currently using. That way when apps need to be updated you will only need to know one password and you won't have to be concerned with which Apple ID is displaying.
Cheers,
GB

Qty and value in PO list are not updated (after a Service Entry)

Hi Experts,
Qty and value still to be delivered in the ME2L are not updated:
I have performed a service entry (ML81N) but qty and value are not updated in the list of the PO in the ME2L.
Could anyone explain?
Many thanks in advance.
Regards,
Cesar

Thanks for quick reply.
I do not configure anything in SPRO (Define release strategy for SES) but I got a red light in the top of the screen near the field "No acceptance" so I presume that the SES should be accepted but as I do not configure anything regarding release startegy, I do not know how to accept the SES.
Besides, I cannot perform MIRO: when I put the PO number, system indicates that there is no (suitable) item found for PO
I should have miss something. Could you please guide me?
Thanks,
Cesar

Problem in pricing conditions are not updated in BAPI_SAG_CHANGE

Hallo Friends,
we have faced the one problem with the standard bapi *BAPI_SAG_CHANGE.
we have passed the 10 item level data to the BAPI_SAG_CHANGE , the bapi BAPI_SAG_CHANGE successfully updated the 10 item level data to the schedule agreement .
the problem is pircing condtions are not updated succesfully for the each items in the schedule agreement.
please suggest the good solution.
thanks
kumar

Hi jons,
Thanks for respoding my request, Please find my below code lines
CALL FUNCTION 'BAPI_SAG_CHANGE'
        EXPORTING
          purchasingdocument           = st_header-number
          header                       =           st_header
          headerx                      = st_headerx
        VENDOR_ADDRESS               =
        HEAD_EXPORT_IMPORT           =
        HEAD_EXPORT_IMPORTX          =
        TESTRUN                      =
        TECHNICAL_DATA               =
     IMPORTING
        EXP_HEADER                   =
        EXP_HEAD_EXPORT_IMPORT       =
       TABLES
                return                = st_return
Begin of modify by kirankumar 07/12/2009
               item                  = st_item
                 item                  = st_item[]
End of modify by kirankumar 07/12/2009
                itemx                 = st_itemx[]
                account               = st_account
     accountprofitsegment = st_accountprofitsegment
                accountx              = st_accountx
                schedule              = st_schedule
                schedulex             = st_schedulex
                sc_component          = st_sc_component
                sc_componentx         = st_sc_componentx
                shipping              = st_shipping[]
                shippingx             = st_shippingx[]
     shipping_exp          = st_shipping_exp
                delivery_address      = st_delivery_address
                item_cond_validity    = st_item_cond_validity[]
                item_cond_validityx   = st_item_cond_validityx[]
                item_condition        = st_item_condition[]
                item_conditionx       = st_item_conditionx[]
                item_cond_scale_value = st_item_cond_scale_value
                item_cond_scale_quan = st_item_cond_scale_quan
                export_import         = st_export_import
                export_importx        = st_export_importx
                item_text             = st_item_text
                header_text           = st_header_text
                head_cond_validity    = st_head_cond_validity
                head_cond_validityx   = st_head_cond_validityx
                head_condition           = st_head_condition
                head_conditionx       = st_head_conditionx
                head_cond_scale_val   = st_head_cond_scale_val
                head_cond_scale_quan = st_head_cond_scale_quan
                partner               = st_partner[]
                partnerx              = st_partnerx[]
     extensionin           = st_extensionin
                extensionout          = st_extensionout.

HT202853 I have many project made in move HD that are not updating to the new iMovie 10 on my new iMac. Why is this not working as stated? How do I get my projects back from backup after old iMac crashed?

I have many projects made in imovie HD that are not updating to iMovie 10 on my new iMac. Why is this not working as stated on the article HT202853? How do I get my projects back from backup after old iMac crashed?

According to:
Update projects and events from previous versions of iMovie in iMovie (2014) - Apple Support
you can update from iMovie versions 7, 8 and 9, but iMovie HD is iMovie 6.
Maybe you can update in two steps, first from iMovie 6 to iMovie 7, 8 or 9 then to iMovie 10.
Geoff.

Unable to proceed in change document are not updating in CDHD, CDPOS tables

Hi all,
This is a question related to Change document.
I created one custom Change document object ZBUDGETS.
As I am trying to place a trigger on FMIT (Total Funds Management) table I created a Change document object ZBUDGETS.
I included some of the authorized fields from FMIT table on which we placed the trigger.
And of course all those fields are change document enabled in the data element level. I generation of the update program was completed. And I got the function module zbudgets_write_document along with some include programs and structure.
Everything is fine, But i am unable to get this change document generated information to these tables are CDHDR and CDPOS.
the problem is when I make any expenditure like PO Posting, it will be logging in the FMIT table and the respective fields also updating. With this the Change document object should trigger and it should send the record in CDHDR and CDPOS tables. This is not happening. If the records are getting updated in the CDHDR and CDPOS tables I can use those include programs and function modules in my program to retrieve the changes in FMIT table.
Since I am unable to proceed further since the documents are not updating in CDHDR and CDPOS tables.
Prabhakar

CDHDR and CDPOS will not be populated with entries only by creating the change document object.Change documents will be written to CDHDR and CDPOS tables only if the function zbudgets_write_document is called in the transaction which updates FMIT.
You need to find an use exit in the transaction updating FMIT and call the function zbudgets_write_document in that exit.
Refer the below link http://help.sap.com/saphelp_47x200/helpdata/en/2a/fa01b6493111d182b70000e829fbfe/content.htm
-Kiran
*Please reward useful answers

Inventory & Distribution GL codes are not updating in balance sheet even th

I am facing one issue regarding Financial statement/Balance Sheet GL accounts updation.
100177-Inventory Repairs & 200402-Distribution GL accounts(Both are Balance Sheet items) are assigned In Financial Statement Version But they are not updating in the B/S Under Respective Heads.They are showing under Un-assigned Accounts.Plz help me that how can i bring this GL acocunt to under Respective Heads...
It would be a great help for me...plz spend some time on this issue...
Regards
Sap Guru

Hello Rony,
Good question.
The design of the system is such that RE is updated during the year end closing only. (At the end of the accounting year). During the year RE is not updated but system shows in the FSV the difference between assets & liabilities = to current yearu2019s profit or loss (up to the period).
Donu2019t worry. Just look at any standard FSV available in the system, copy it and edit it as per your requirements.
Cheers
Ambadas

Data Migration Opening Balances are not updating in the Report F.08

Hi,
We have uploaded the GL balances in 2008 for the year 2007. But they are not updating in the F.08 report when i executed for 2008.
Why they are not updating in the report. In which table can i check the Data migration values in the system?
Thansk
Kishore

Hi We have uploaded all the values in 2008 with 2008 date. fiscal year is K4.
F.08 Report for the year 2008 is showing only 2008 accumulated values. But not showing the Opening balances which we have uploaded in 2008 for the before years like 2007.
Why it is showing like that?
Thansk
kishore

Excise values are not updating in factory sales

Dear SCN's,
I'm facing an issue while doing factory sales, while creating sales order and billing I'm using J1IIN for excise invoice and then updating in J1I5 transaction but the values are not updating in table J_2IRG1BAL. Can anyone suggest what to do in order to get the values updated in table.
Thanks & Regards,
Kumar

The following note explains how you need to update J_2IRG1BAL table.
Note 951955 - CIN: General clarifications for RG1 goods
Have a look at this.
G. Lakshmipathi

Actuals are not updating in PPB

Similar Messages

Maybe you are looking for