Actvating ODS

Hi Gang,
I have created an ODS Object and I am stuck on Activation process.When I click on create update rules for the Infocube and selecting my ODS, I get a warning that "Key Figures Were set to no update".
The only option I have is to continue. However when I do so and try to activae the ODS, it is never activated and appears grayed out. Please help.

Hi ,
   Key Figures Were set to no update means no data would get added to your ODS .
  1.Ignore this message "Key Figures was set to 'no update'" .
  2.Come in gray screen , click cross (Ty.) Which is followed by key figure .
  3.select update type as "Addition"  , if u want to write routine, formula,u can write here ow select Source Key Fig.
  4. SAve & actvate .
I hope this will help u out.
Do reward points if it is beneficial
Regards,
Aparna

Similar Messages

  • Urgent ......data is not  loaded  into  the ODS

    Hi,
    we try to load the data in to ODS via the Infopackage. Job is finished with Green status. In the requests tab I saw that transferred  are 1486 & the addded records are 1486.
    But the ODS sah empty structure,  no records are loaded into the ODS?
    Any suggestions please?
    sailekha

    Hi
    It is availabe for reporting the status is green
    all the related objects are active
    I try to actvate ODS Data, But it asks me the job name
    I am unable to actvate the Data of ODS.
    Still I have the same problem how to proceed further........please let me´know
    Yesterday It is working fine but today I got this problem in Production.
    any suggestions please......
    thanks in advance

  • Error in ods activation due to lack of roles

    Hi Experts,
    When i am trying to actvate ods its failed due to lack of roles in my server so which role i need to create for this?
    David

    activate ods  may cause to create new master data , so I think you may need to check sm37 and st22  to check which infoObject cause this error.
    RL

  • Actiavate ODS

    Hi Experts,
               how do i know whether an ODS has been activated or not.. ( my guess is that i shld find a small table like icon next to the request ID in the monitor screen..correct me if iam wrong)
    And also can i delete an request in ODS b4 and after actvating it..Please throw some light on it..Thank u
    Dave

    Hi Dave,
    you can check / see in table RSDODSO if an ODS is active or is in any other state (Revised, New, Content).
    You can delete requests out of an ODS if they are activated or not. Once an Request is activated you can only delete the request if a) the request is still available in changelog, b) if an datamart exists and the requests is already updated into sub-sequent datatargets via datamart it must be delelted there first, c) the request is that one in the ODS with the highes SID, otherwise other request must be deleted first.
    If the requests was activated togehter with other requests and has therefore the same changelog request ID as other Requests (ODSR_Request_Nr.) the requests could only be deleted together with these requests - these requests belong together if they are activated togehter.

  • View data in ODS

    BW Experts,
    I have a new ODS and have loaded data in it. When I rt click on the ODS and choose manage and then if I want to see the contents of the ODS I am getting the following error.
    <b>System error: RSDRC / FORM AUTHORITY_CHECK USER NOT AUTHORIZED ZSD_O01 ZSD_O01
    Message no. DBMAN100
    Diagnosis
    A system error with the following parameters has occurred in the data manager:
    Parameter 1 = &v1&
    Parameter 2 = &v2&
    Parameter 3 = &v3&
    Parameter 4 = &v4&</b>
    However, I can still see my data through my active data table tab.
    Any thoughts on why I am getting this error when I want to see it directely through manage ods?
    Thanks
    Ashwin

    Hi Ashwin,
    Is the ODS enabled for reporting? I came across a similar situation recently and it was because I did not have the auth for data access for that particular ODS. I could look at the data through SE16 and the active data table, but not if I did a LISTCUBE for it.
    After it was added to a role and assigned, the error message was removed. (Auth object: S_RS_ODSO)
    Hope this helps...

  • Dsatsource /ODS/Cube for Open PR and Open PO"

    Dear Experts
    I want to build a report in which I need to show "Open PR and Open PO" but I could not locate these fields in the BW CUBE / ODS / DATASOURCES. Can anybody tell me where I can find these fields..........
    Dinesh Sharma

    Dear,
    There is no specific standard data source is not available to fetch us "Open PO" or "Open PR". first vll talk about PO.
    For open PO,
    case - 1
             Need to report count of all PO's which are in open status.
    Case-2
            Need to report TBQ ( to be delivered Qty ) against each over due PO.
    Basically we have - EKKO - HEADER , EKPO - ITEM AND EKET - SCHEDULE LINE ( GRC -  GOODS RECEIVED ) is available,
    so create a view, take all these three tables EKKO, EKPO and EKET.
    EKPO     
    1     DELIVERY COMPLETED INDICATOR     ELIKZ
    1     DELETION INDICATOR IN PD     LOEKZ
    1     ARTICLE NUM     MATNR
    1     SITE     WERKS
    X     PO DOCUMENT NUM     EBELN
         PURCHASING ORDER QUANTITY     MENGE
         PURCHASING ORDER UOM     MEINS
         NET ORDER VAL IN PUR ORDER CURRENCY     NETWR
         NET PRICE IN PURCHASING DOC IN DOC CURRENCY     NETPR
    no     PRICE UNIT     PEINH
    X     ITEM NUMBER OF PURCHASING DOCUMENT     EBELP
    EKKO
         DATE ON WHICH RECORD WAS CREATED      AEDAT
         PURCHASING DOCUMENT DATE     BEDAT
         DELIVERY DATE     EQ_EINDT
         RELEASE INDICATOR PURCHASING DOC     FRGKE
         RELEASE STATUS     FRGZU
    0PO_UNIT     PURCHASING DOCUMENT NUM     EBELN
         CURR KEY     WAERS
    EKET
         QUANTITY OF GOODS RECEIVED     WEMNG
         PURCHASING DOC NUM     EBELN
         ITEM NUM OF PURCHASING DOC     EBELP
    Logic - create a generic DS, by view, FIRST send the data to DSO, there mention a field like TDQ ( to be deliver qty ), TDQ = po qty - goods received qty. -
    create  a cube above DSO, set a filter, allow only those records who has TDQ <>0, so your cube contains only pending PO.
    hope it helped u.
    Thanks,

  • Error while activating ODS Object

    Hi,
    I have loaded the data from R/3 to a ODS Object and the activation of ODS failed due to the following errors as shown below..
    -Value '20060 ' of characteristic 0CALQUARTER is     not  plausible
    -Error when assigning SID (details in long text)
    -Activation of data records from ODS object ZODS_02 terminated
    -Error getting SID for ODS object ZODS_02
    I could see that Calendar Quarter as 20060 in PSA. How should i get rid of this error. Any idea would be appreciated.
    Regards,
    Raj

    Raj,
       you are getting this calender qurter from SAP right... check in RSA3 fro the your Datasource. if you are getting same value like '20060'. you can do one thing... you can set 'No Update' in Transfer Rules. you can write a routine in Update Rules for populating the data for calender Week.
    you can call some standard function modules or you can write a small routine. If you want to write a routine check this thread...Re: Date to Quarter
    Possibilites:
    1. updtae rules
    2. if RSA3(PSA) shows the value of the Quarter as '20050', if it is custom extractor(Generic using FM) you can change this.
    3. If it is Standard Extractor or Generic Extractor (using either view/table or Infoset) you can enhance this. you can do the same thing in SAP Side.
    All the best.
    Regards,
    Nagesh Ganisetti.

  • Error while activating ods

    Hi all,
    i have the following errors turning up while activating ods.
    1. creation of export data source failed
    2. rfc connection to source system b3tclnt800 is damaged - no meta data upload
    3. error when activating ods object
    Can anyone let me know how to rectify it.
    regds
    hari

    Hi,
    The problem is with ur Source Sys connection..
    Above problems will be solved by restoring Source System Connection...  Ask your Basis team to restore SS.
    Thanks

  • Error While Activating ODS in BW

    Hai Experts
    While Activating the ODS the following errors are occurs
    The creation of the export DataSource failed
    RFC connection to source system B3TCLNT800 is damaged ==> no Metadata upload
    Error when creating the export DataSource and dependent Objects
    I am using IDES BW 3.1C.
    Kindly suggest me a solution.
    Balaji VK
    09342501065
    Error when activating ODS Object SALEODS

    hi,
    also take a look this
    Re: "RFC connection to source system [our R3 TEST system] is damaged ==> no Met

  • Error while updating data from PSA to ODS

    Hi Sap Gurus,
    I am facing the error while updating data from PSA to ODS in BI 7.0
    The exact error message is:
    The argument 'TBD' cannot be interpreted as a number
    The error was triggered at the following point in the program:
    GP44QSI5RV9ZA5X0NX0YMTP1FRJ 5212
    Please suggest how to proceed on this issue.
    Points will be awarded.

    Hi ,
    Try to simulate the process.That can give you exact error location.
    It seems like while updating few records may be no in the format of the field in which it is updated.
    Regards
    Rahul Bindroo

  • Error while resetting the delta in ODS  (BI 7.0)

    Hi all,
    I face a problem in delta resetting...need your help... Thanks..
    I have an ODS-1  which has target cube1, cube2, cube3....One week back a new target has been added as ODS-2....All complete data from ODS1  has been piped into ODS 2..(Note.. ODS2 has many more inputs from other cubes/ODS too)
    NO issues till now....
    I found a data problem in ODS-1 which got loaded 15 days back..... I have removed all 15 requests from cube1, cube2 and cube3... Now I am trying to reset the delta in ODS1...
    I am getting the following error....Infoprovide ODS2 still contains request... Delete this first....
    Since ODS2 has many other data alongwith ODS1... If I try deleting request from ODS2,, I need to clean it totally and redo... I dont want to do this...
    Is there any way to disconnect this delta link between ODS1 - ODS2..... So that I will reload the data in ODS1 and populate into all targets...
    Let me know your suggestions.... Thanks!
    Regards
    Ayyappan.V

    Is there any way to disconnect this delta link between ODS1 - ODS2..... So that I will reload the data in ODS1 and populate into all targets...
    I dont think you can disconnect the link. just delete the requests originating from ODS1 in ODS2 and you can leave all other requests intact that are from other dataproviders and do a reinit.

  • Error  While  Deleting Data  From ODS

    Hi all,
    We are getting short dump while deleting data from a perticular ODS.
    Part of short dump is--
    trigger Location of Runtime Error
       Program                                 SAPLRSAC
       Include                                 LRSACU75
       Row                                     535
       Module type                             (FUNCTION)
       Module Name                             RSAR_TRANSTRUCTURE_ACTIVATE
    help is desperately required
    Regards
    Srini--

    try to activate InfoSource and later delete data.
    Check if all ODS related objects are consistent and active.
    also pls attached the whole dump for more clarity if this does not work.

  • Error while activating the ODS "Request No longer Exist in ODS".

    Hi All,
    I had deleted one request from four ODS's before completely loaded from R/3. Now when i am trying to activate from one of them using process chain it is giving me the error massage "Request No longer Exist in ODS".
    But when i am manually activating this it is not giving me any error.
    Please suggest solution for the same.
    Regards,
    Rohan Shah

    I had deleted one request from four ODS's before completely loaded from R/3.
    Before deleting the request make QM status red and then delete.
    when i am trying to activate from one of them using process chain it is giving me the error massage "Request No longer Exist in ODS".
    Already you have deleted the request. How can you activate the same request?
    Have you loaded the data again?
    With Regards,
    Kishore.
    Edited by: Siv Kishore on Apr 22, 2009 3:58 PM

  • Can not see ODS infosource in the system

    Hello,
    I am unable to see Infosource of my ODS under the infosources tree. This is only happening in DEV and PROD. In QA system i could see it and also create additional infopackages.
    The bottom line is I want to be able to create extra Infopackages under it other than what system creates.
    Is there any setting i have to do or any ideas?
    Thanks in advance,
    vamsi.

    Do you mean export data source one's 8*...
    go to rsa12... settings-- display generated objects -- click on radio buton show ods generated objects and hit the arrow key..

  • 2lis_11_VAITM not inserting all data in ODS

    Hello Gurus.
    I'm using extractor 2lis_11_VAITM, when I test the extractor in RSA3, it is bringing me all registers of table VBAP, but when I load this extractor into an ODS in BW, It is not inserting all registers into the cube, some "return orders" are missing, how can i solved this problem ????   I'm using in ODS key Doc number and position.
    THANKS IN ADVANCED.

    Hi Sudheer, ther is no selections during data load, and also ther isn't any routine(either in transfer or update rules).  It's supposed that all registers have to be loaded to the ODS no ?? because i'm using key Doc number and positions, so I want all documents with all positions to be loaded, but this is not happening, there are missing the "'return orders'".
    Any other idea of why this is happening ??

Maybe you are looking for