Actvation problem DSO

Dear all,
we have written some logic in endroutine in transformation,
the data floe is datasource->DSO(datasource having 10 fields in DSO we appended one fields to deriving the logic)
when run the DTP in new table of the std DSO we are getting the data as per the logic as we written ,
but after activation of DSO the particular columns shows blank value...
could  u plz guide us how to resolvetis?

i think if its problem in routine meas we cant get data in new table.
our case we able to see the data in new table ,but in ative table doent have data of that particular coumn only in which we written the logic ...
plz...
Edited by: sapraaz on Mar 2, 2012 9:05 AM

Similar Messages

  • Regarding activation of DSO in Process Chain

    Hi All,
    I am getting error in process Chain actvation of DSO
    DataSource does not exist in version A in source system
    Activation of M records from DataStore object ZPI_O53 terminated     
    Solution please

    Hello Sunitha,
    The DataSource has been changed or saved and it doesn't match with the BW datasource timestamp. So you have to replicate the datasource to BI and activate the transformation.
    Thanks
    Chandran

  • Problem in DSO activation - Unicode characters

    Hi all,
    I am loading data to a DSO from a 02 extractor. I have the transformation in which i have a field routine for product description, which basically converts lower case to upper case, as the product description characteristic in the target accepts only upper case characters. When i loaded data in the production system, i was able to load data into the DSO, but was not able to activate it.
    The error i get is
    Value ' <Chinese characters>' (hex 'XXXX) of characteristic 0BBP_UCPROD not valid
    Error while assigning SID : Action VAL_SID_CONVERT
    I think the problem is with the conversion of these two byte characteristics. Can you please suggest a work around ?
    Regards
    snehith

    go to /nrskc and set the value to ALL_CAPITAL_PLUS_HEX
    and
    Infoobjects texts accept ANY CHARACTERS regardless of any settings..that include chinese..
    use literal data in infoobjects texts instead of characteristic values whenever possible and acceptable.
    Itu2019ll relieve you from many problems with data loading.
    Ref: Invalid characters in SAP BW 3.x: Myths and Reality. Part 1.
    Invalid characters in SAP BW 3.x: Myths and Reality. Part 2.

  • Problems with transformation; infoobject not updated in DSO.

    Hi all,
    We are having some problems with one of our transformations between PSA and DSO.
    Suddenly some of the fields are not filled in the DSO. The mapping for field Sales order number worked fine, and then I added an infoObject in the DSO to hold the info for Sales order item. I also replaced the infoobject that was supposed to hold the sales order number. After this, none of the two fields has any data in DSO. I checked the PSA, and the data is available here. I tested the rule in ‘Rule details’ and for sales order number it gives the correct result, but for sales order item it gives a runtime error; assertion failed. I checked on SAP Notes, and found 929934. But the corrections are already added in our system.
    Has anyone got any ideas on what to do?
    BR,
    Linda

    Hi,
    There are a number of problems in Transformation when either a source field or target field is changed.
    This can lead to inconsistent transformation.
    You can raise a message to SAP or best thing is if possible delete the Transformation and create a new one.
    Regards,
    Nitin

  • DSO transformation problem

    Hi ,
    Can any one give me the some hints for the follwoing two problems..
    1) I have one original DSO (NAME A) and created new DSO (NAME B) copy of the A. Both structures and fields are same.
    While creating transformationsbetwen A and B, one field is missing from source DSO (A). but that field is available in DSO A and B. In transformations iam not able to see in souce DSO. Any suggessions..on this..?
    2) DS in R/3 2LIS_!!_VAHDR having some fileds.all those fields are based on the table VBUK...
         While extracting data or looking data in he table VBUK  field AEDAT (Changed on) is empty... Even though i was created new sales document and chaned that sales document..
    when it will be filled AEDAT filed in VBUK field..? which change is this..?
    Thnaks
    BK

    Hi,
    1) NO it is not 0recode mode... It is 0rate type. It is in DSO A .But in transformation it is missing to map with DSO B 0rate_type.(DSO B is copy of DSO A)
    2) I did changes to the sales document(Changed the qty and saved) ,but even after that also it is empty.Same changes i can get it from other VBAP and AK tables .but i need from VBUK table AEDAT field. Is this field capturing those changes ..? or any other changes it will sve in aedat..?
    Thanks
    BK

  • Data problem from DSO to cube

    hi
    i am facing data from problem from dso to cube
    i am getting daat into dso
    plant   material  doc_num  itemno  qty
    p1      m1           1              1         10
    p1      m1           1               2         20
    dso i am uisng key fields
    doc_no
    item_no
    doc_year
    data fields
    material
    plant
    qty
    while loading data into cube
    its showing only
    p1 m1 1 2 20
    item 1 is missing
    there is no iten num filed in my target field?
    ple let me know ur idea.

    Hi,
    The problem is in your ODS/DSO.
    In your ODS you have 'Doc_num' as key field.
    For both Items 1 & 2, you have same key field ( Doc_Num) Value.
    So, the first record will be over written by the second one. So from your ODS you will get only the latest record to the Cube.
    If you want to send both doc_nums to cube, you need to bring doc_num to the data fields area of ODS.
    Hope this helps.
    Cheers
    Praveen

  • Problem while  data processing TRANSACTION data from DSO to CUBE

    Hi Guru's,
    we are facing problem while  data processing TRANSACTION data from DSO to CUBE. data packets  processing very slowly  and updating .Please help me regarding this.
    Thanks and regards,
    Sridhar

    Hi,
    I will suggest you to check a few places where you can see the status
    1) SM37 job log (give BIrequest name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
    2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. See if its accessing/updating some tables or is not doing anything at all.
    If its running and if you are able to see it active in SM66 you can wait for some time to let it finish.
    3) RSMO see what is available in details tab. It may be in update rules.
    4) ST22 check if any short dump has occured.
    You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
    If you feel its active and running you can verify by checking if the number of records has increased in the cube.
    Thanks,
    JituK

  • DSO activation problem after creating the secondary indexes

    Hi,
        I am facing the problem with DSO activation after creating the secondary indexes.
    •  Compared with Info Cubes there is no functionality available which allows dropping and recreating a secondary index before/after the data activation.
    As a workaround I can write a simple report which drops and creates the indexes on database level.
    By using a process chain, we can simply insert the drop index report before data activation and the create index report after the data activation process.
    Can any body help me step by step procedure or Material to write the programs for delete index and create index reports on DSO object?..
    Thanks in advance for your help.
    Thanks & Regards,
    Bala

    hi,
    in BI if you are using the dso for reporting then you can simply chk the settings of dso for SID generation.
    no need to create the indexes or delete it.
    if the dso is not used for report then no need to use indexes.
    Ramesh

  • Performance Problem in Report built on a DSO

    Dear All,
    we had a report created on the top of the ODS(0sd_o06) with selection criterion as profit center,now when we click the profit center varible entry to see the selection, a window pop up and it is there for 30 mins after that only we can make any selection ,request you to tell me the solution to improve the performance of the variable input.
    I had chked all the parameters and implement it but no improvement
    hello,
    1)the sid generation check box is ticked.
    2)the oprofit_ctr is already set to read data from Master data for filter value selection.and about navigational attribute we are using only four navigational attribute.
    3) turn on the cache in RSRT for the query built on DSO.
    4)Index is also created in the dso, Plzz help to improve the performance.
    Thanks,

    I believe your problem is with variable selection of 0profit_c... that values are shown after 30 mins for selection. Settings at ODS / DSO will not help.
    You need to look at the setting of list of value of this field and then if need be create idexes etc on that particular infoobjects. I remember there are settings like all the values, values in DSO etc. try those may help.
    Regards
    Vikash

  • BI7.0 Hexdecimal values problem while activating the data in DSO

    Hi Friends,
                     I've got the data upto PSA and i've run DTP also from PSA to DSO, but while activating the data in DSO from New Data Table to Active Data Table, it's giving the error given below:
    Error when assigning SID: Action VAL_SID_CONVERT table
      0DOC_HD_TXT     
    Value '1st disb' (hex. '00310073007400200064006900730062') of          characteristic 0DOC_HD_TXT contains invalid characters
    Process 000037 returned with errors.
                it isn't accepting the values like with numberels and chars together
    ex: 1st disb, 70 cr Gen Hsg.
                   I want the same to be in the report, how these are to be allowed?, i don't want to edit in PSA and there are a lot of values like that i can't edit all those, since there are thousands of records.
    Regards,
    BalajiReddy

    Hi Anil,
                       Thanx for your quick replay, i've allowed ',' in RSKC and i've checked the check box LOWER CASE LETTERS for IO 0DOC_HD_TXT, the problem was almost solved out. What does ',' mean by?
                          Why lower case letter has to be checked only for this IO (0DOC_HD_TXT), not for others? if it is checked, it allows only lower cases, doesn't allow upper cases i think. won't there be any problem? if it is done like that?
            pls tell me the reason, i'm really thankfull for your quick replay
    Regards,
    BalajiReddy

  • Problem loading data into write optimized dso.....

    Hi ,
    I am having problem loading the data from PSA to write optimised DSO
    I have changed the normal DSO into a Write Optimised DSO. I have 2 data sources to be loaded into the write optimized DSO. One for Demand and one for Inventory.
    The loading of Demand data from PSA to DSO happens fine with out any error.
    Now while loading the Inventory data from PSA to DSO , i get the below errors
    "Data Structures were changed. Start Transaction before hand"
    Execption CX_RS_FAILED Logged
    I have tried reactivating the DSO, Transformation, DTP and tried to load the data again to the write optimised DSO, but no luck, I get the above error message always.
    Can some one please suggest me what could be done to avoid the above error messages and load the data successfully.
    Thanks in advance.

    Hi,
    Check the transformations is there any routines written.
    Check your Data struture of cube and DS as well.
    Is there any changes in structure.
    Data will load upto PSA normally, if is there any changes in struture of DSO, then the error may occur.just check it.
    Check the below blog:
    /people/martin.mouilpadeti/blog/2007/08/24/sap-netweaver-70-bi-new-datastore-write-optimized-dso
    Let us know status.........
    Reg
    Pra

  • Problem in transfering data from DSO to InfoCube

    Hi,
    I am trying to transfer data from DSO to Infocube. But it is giving the following message.
    Last delta update is not yet completed
    Therefore, no new delta update is possible.
    You can start the request again
    if the last delta request is red or green in the monitor (QM activity)
    It is not allowing to load data to InfoCube from DSO. I checked the request number. But there is no request number in InfoCube. If request no is there I can delete the request from InfoCube and delete the data mart status in DSO and reload again.But there is no request id in IC. So plz guide me how I can tranfer data to InfoCube overcoming this problem.
    Actually further updata was running from DSO to IC. But it failed. Executing Function Module : RSPC_PROCESS_FINISH, I set the chain  green before loading
    data to InfoCube. So it starts executing the next chain. So there is no request id. So plz guide me how I can retain this request id.
    Edited by: Purushotham Reddy on Jan 28, 2008 11:19 AM

    Hi Reddy,
    Make the QM Status Red of the failed request even if it is red.
    and then run the same infopackage used in the chain. This will ask for repeat of last delta.
    If this process is understood to u then its fine otherwise read below:
    the other option is check if this failed request is present in PSA. If it is present in PSA then update the failed request from PSA, here u wont need to do a repeat of last delta. This Option is easier. this u can do from the ,manage tab of the data source I think this u might be surely knowing....
    Assign Points if it helps u.....
    Thanks,
    Nagesh.

  • Problem in loading data to DSO

    Hi,
    I have a problem in loading the data to DSO through Info package. The delta request has been running for a long time, but no data has been loaded. The job details screen is showing as below.
    Previously there was no issues with this chain.
    Can some one guide me to solve this issue please.?
    Regards
    Ragu

    Hi Ragu,
    The same issue has been happened for me long time back. I have solved this issue by running the Repair Full request and then Init. delta without Data Transfer.
    May be this may also work for you.
    Steps:
    1.Delete the request by marking it as RED
    2.Run Info package Repair full Request.
    Once this is success,
    3.Change Info package and Run Init delta without data transfer
    4. If it pop ups Init Delta already exists,then delete the previous init from the source.
    after the init delta is ended fine, then change your Info package to Delta as it is before.
    Hope it helps.
    regards
    Deva

  • Problem in getting correct datain DSO although routine is working!

    I have two DSOs -DSO03 and DSO04 and in-between a transformation where a 0Order_Val field is getting calculated using the routine code as below:-
    IF ( COMM_STRUCTURE-PROCESSKEY = '001' or  
        COMM_STRUCTURE-PROCESSKEY = '011' or
        COMM_STRUCTURE-PROCESSKEY = '021' or
        COMM_STRUCTURE-PROCESSKEY = '004' or    
        COMM_STRUCTURE-PROCESSKEY = '014' or
        COMM_STRUCTURE-PROCESSKEY = '024' )
        AND COMM_STRUCTURE-BWAPPLNM EQ 'MM'
        AND COMM_STRUCTURE-ORDER_VAL <> 0.
        perFORM QUANTITY_CONVERT
           USING    COMM_STRUCTURE-ORDER_VAL
                    COMM_STRUCTURE-po_UNIT
                    COMM_STRUCTURE-base_uom
                    COMM_STRUCTURE-numerator
                    COMM_STRUCTURE-denomintr
           CHANGING RESULT.
    Problem:-
    For few doc numbers, the Quantity convert is fetching correct data, after applying the convert subroutine.
    But in some, (although it is not supposed to return 0 after applying the sub-routine of Quantity_Convert),
    it is showing wrong result as "0" in DSO04,
    (although there is value in DSO03 for the field 0Order_Val).
    Example:-
    Doc num       Field name                   DSO 3 Value           DSO4Value       Remarks
    4500000089  0Order_ Val                    3686.21                 3686.21           Correct
    4500000084  0Order_Val                      500000                        0               Wrong
    While trying to debug the ABAP routine through breakpoints, I have found that the result fetched is correct (i.e. 500000 for doc_num: 4500000084) but when displaying data in DSO04 it is showing "0".
    I have checked the input parameters and all are same.
    Only exception is difference in currency between the two records.
    One is USD (Doc num :4500000089) and the other is ESD (Doc num :4500000084).
    Although currency is not any input parameter.
    Also have tried Overwrite/summation setting in the Transformation but with no result.
    If anyone can indicate any solution to this peculiar problem then it will be very helpful.
    Regards,
    Ritu.
    email: [email protected]

    Hi,
    it is a bug in the Acrobat Reader. I had the same problem. Just add an input field called "myIndex" into the row and store there the current index when creating the line. With this solution you can programatically work with your own created index without the bug of the Acrobat Reader.
    Take care,
    Thomas

  • Problem in deletion of data from DSO

    Hi All,
    We are facing a problem in deleting data from Data Store Object.I am trying to delete data by using right click option on DSO -->Delete Data.It is saying "The system has not finished loading request no : XYZ".
    I have tried to trace that request and found that request is running in background and the related process chain was deleted.Also no jobs of that request are available.
    Now i want to delete one field from that particular DSO and it is not allowing because we are unable to delete data.Actually no data is present in Active table but we have data in Change Log table which we are unable to delete.
    Thanks in Advance.
    Regards,
    Jaya.

    Hi,
    Any way u r deleted that processchain if it is there u can kill that job through process chain by killing that job,if it is not possible
    u should ask ur BASIS people in SM50 or SMICM tcode we can kill our job but ask the basis people.
    once u deleted that then delete the data in hange log then (other once the data is there through that DTP it will not allow u to delete so u delete the data) then go for deleting that DTP also.
    Thanks & regards
    sathsih

Maybe you are looking for