ACVHD file conversion in Compressor?

Using Log & Transfer to import ACVHD files in FCP6 makes the footage unusable (juddering, very obvious that frames have been cut).
What program can I use to transcode my ACVHD files to SD resolution, to be honest I don't care about quality anymore as long as you can watch smooth video footage. Can I use Compressor and if so to what settings do I have to use?
Also I have a FLIP4MAC file bugging me, I think it has to do with my trial to use WMV extension, can the FLIP4MAC be the problem?

Compressor will not work.
Toast 9 or 10
VoltaicHD
VideoPierHD
Adobe Media Encoder
NeoScene for the Mac
iMovie to AIC

Similar Messages

PAL to NTSC conversion in compressor

i need to create a n NTSC dvd for a client so i need to convert my QT file to NTSC in compressor.
Now i used the standard PAL to NTSC preset but the final file seems to be huge compared to the PAL M2V i created for the PAL version of the DVD and also still seems to be complete QT file? jot a M2V and AC3 file for use in DVDSPro.
Anyone have a workflow for the conversion in Compressor (please not the Natress conversion as it really seems so confusing to me)
Many thanks

Well, not that fast...
If I was going to do it again I would proceed as I did recently i.e.
Use toast to get a NTSC DVD (after accepting transcoding by Toast)
Use DVDxDV (or equivalent, this is what I use) or MPEG streamclip to extract a .mov file corresponding to your DVD files (if several VTS, DVDxDV is doing a very good job for each separated parts)
Then, the resulting .mov file that you can play in QT can be imported ditrectly (video and sound) into FCP for further editing, and compression via compressor to get mv2 and ac3 that you can use into DVDSP
May not be the typical professionnal way...but it works.
Ivan

Advice needed - .vob file conversion for playing on itouch

help needed and advice on best application for dvd/movie file conversion.
i want to convert .vob file so i can transfer to ipod.
seems like there are several free & pay for app's out there - any guidance as to which is the best would be appreciated.
thanks in advance

chriswalsh wrote:
.. i want to convert .vob file so i can transfer to ipod.
haven't tried for vob, but a nice lil' tool:
http://thelittleappfactory.com/evom/
another well-known converter, esp for DVD>>Apple-toys-usage is
http://handbrake.fr/ (don't worry, english spoken)
note to Mods: the latest version is NO ripper (=DRM-override), but a converter..
both free, no additional installs needed..

Sender File Adapter with file conversion

Hi guys,
Im using a Sender File adapter with file conversion. The message to be processed has a structure with fixed lengths and in your content are some values that needs to be ignored.
An example:
value1 <b>value2</b> value3
I want to ignore <b>value 2</b> but I cant find a parameter for that! Do I need to define dummy fields on my data type and ignore those fields during mapping? Or there is a specific parameter for that?
Thanks in advance,
Ricardo.

hi,
there always is another way:)
you can import the whole line to one field
and cut it inside the adapter module
(then you can define start and stop of the substring that you need to use)
but of course it's not standard even though it's quite easy to achieve in java
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Sender File adapter File Conversion with key fields

Please help me guys, I already spent way too much time on this!
I checked a couple of BLOGs and I think I'm doing the right thing except I'm not getting the result I would expect.
I'm trying to create an IDoc using the from a flat file.
I get the following error:
During the application mapping com/sap/xi/tf/_MM_TEST_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: RuntimeException in Message-Mapping transformatio~
The Source file is this:
H
L0015
The file adapter does create the XML below (looks fine):
<ns:MT_SINGLE xmlns:ns="http://PPSC_TO_BO_INVOICE">
<HEADER>
     <ID>H</ID>
</HEADER>
<LINE>
     <ID>L</ID>
     <SITE>0015</SITE>
</LINE>
</ns:MT_SINGLE>
When I test the map in IR, with the XML that this file adapter created (above) it works fine!
Also if I take away the HEADER from the source structure everything works fine and I can create the IDoc, therefore I think something must be wrong in the file conversion, the mapping is so simple there is nothing to fail there.
The file conversion parameters that I have:
Document Name: MT_SINGLE
Document Namespace: http://PPSC_TO_BO_INVOICE
Document Offset:
Recordset Name:
Recordset Namespace:
Recordset Structure: HEADER,1,LINE,*
Recordset Sequence: Ascending
Recordset per Message:
Key Field name: ID
Key Field Type: String (Case-Sensitive)
LINE.fieldNames: ID,SITE
LINE.fieldFixedLengths: 1,4
LINE.keyFieldValue: L
HEADER.fieldNames: ID
HEADER.fieldFixedLengths: 1
HEADER.keyFieldValue: H
What am I doing wrong???
Any help is much appreciated.
Thanks,
Viktor Varga

Hi Viktor,
Basic rules:
1. Down load XML payload(output From Adapter) and test it in IR mapping program. If it is working there is no reason why it will fail in Runtime. Also Check Cache is up to date.
Generally the problem lies with namespace.
Hope this helps
Regards,
Satish

File conversion and append file in receiver file adapter

Hi
I have a batch IDoc -> XI(3.0) -> file scenario with file conversion to create a flat CSV-like file. The problem is that because of the amount of data sent from R/3 (~20000 employees), the idoc is split into several idocs. In my receiver file adapter I want to append all the idocs contained in this data transfer to one flat file, before transmitting to FTP server.
For the next batch transfer (the next day) XI should start all over and create a new file and append all idocs contained in that transfer before transmitting the flat file to FTP server.
Can this be done using the 'Use Temporary File' and 'Append' options in the FTP connection Parameters in the comm-channel?
It is not an option to append the file in the FTP-server, because the files in the destination folder are moved immediately after arrival, so the file will be moved before file adapter can append all the files.
Does anyone have any suggestions to how to solve this?
Br
Kenneth

Hi Kenneth
Did you ever get a solution to this problem?
Regards
Russel Irvine
[email protected]

Adobe XI won't open pdf in windows 7; needs file conversion to encode text. need help!

adobe XI won't open pdf files in windows 7; error msg says it needs file conversion to encode the text. choosing any of the options available still does not open it. please note that the pdf's are attempting to open in WORD. if it needs to open elsewhere, then how to i make adobe open elsewhere every time? thanks!

thank you mike. i tried to follow your shared link to unisntall and re-install the software.
now i can open pdf without any error msg.
however.. the file context cannot be showned... which is in white screen only.. i tried to close and re-open the file, but still can't view the context correctly. could you please help? thanks.

FCP X freezes and must force quit? I have a FCP installed on a Mac Mini (4 gig memory) and Lion OS. The import files are large ACVHD files from a Canon G10 camera. FCPX freezes and requires a force quit. Is anyone else having these problems?

I am using FCP X on both a MacMini (10.7 with 4 Gig memory) and an iMac (10.6 with 4 gig memory). The files are ACVHD files imported from a Canon G10 camcorder. FCP is constantly freezing and requiring a forced quit. Could it be that FCP X was not tested thoroughly for use on a Mac Mini?

I think it's safe to say that FCPX wasn't tested throroughly for use on anything.
with that out of the way, there are many variables as to what might cause your problems, but I don't think it's the mac mini as long as it meets the specified minimum requirements (especially the graphics card).
You might try creating a camera archive first and then importing from that.
The other issue might be the file format itself; you might need to use Clipwrap first. Maybe someone who has the same camera can chime in.

XML file conversion after sender file content conversion

Hi,
I have issue refarding file content conversion.
My input structure is
<MT_RCICrecords>
<TRNH>
<RCIC>
<RECH>
<RECL>
<RCIC>
<TRNH>
Afetr sender File content conversion (csv to xml) it produces xml file as below (since file conversion does not support 3rd level of hierarchy)
<TRNH>
<RECH>
</RECH>
<RECL>
</RECL>
</TRNH>
It does not recognize RCIC.
Now i am trying to map this to IDOC and getting error as
'MT_RCICRecords tag found instead of IDOC BEGIN ='.
CAn anyone suggest me how to chaage this xml output after File content conversion to add RCIC tag in xml file?
I am new to XI so please give me some sample code to.
Thanks.
Yashpal
Its urgent!

My problem is xml generated from content conversion is like below
<MT_RCICrecords>
<TRNH></TRNH>
<RECH></RECH>
<RECL></RECL>
<TRLR></TRLR>
</MT_RCICrecords>
and i want it to be
<MT_RCICrecords>
<TRNH></TRNH>
<RCIC>
<RECH></RECH>
<RECL></RECL>
</RCIC>
<TRLR></TRLR>
</MT_RCICrecords>
which is not happening
My input message structure is
MT_RCICrecords
TRNH
RCIC
RECH
RECL
i hope it is clear now
TRLR

Pdf pack will not create a pdf from a tiff file conversion failure Why

pdf pack will not create a pdf from a tiff file conversion failure Why

Hi David Turner,
What is the exact error message which you are facing while converting the file from .tiff format to PDF format.
As per my knowledge, PDF Pack supports conversion from .tiff format to PDF Format -Different File formats that Adobe PDF Pack supports.
Regards,
Rahul Tyagi

Receiver CC File - Complex Flat File Conversion

Dear forum users,
I want your opinion about the feasibility of the content conversion described below using Receiver CC.
The structure of my file is the following
- A File header segment (FH)
- 1...N Business Object that is described by many segments
- A file footer segment (FF)
Exemple of business Object : Purchase Order :
1 Header Segment (POH)
N Item Segments (POI)
Exemple of file :
FH
POH (PO 1)
POI (PO 1)
POI (PO 1)
POH (PO 2)
POI (PO 2)
POI (PO 2)
FF
Is content conversion standard tool can deal with such a structure ?
Note that in the file created, the order of each segment has a big importance :
PO Items of PO 1 must be after PO Header of PO 1 but before PO Header of PO 2 !
I thnik the structure requested by converter described in documentation do not fit with my case :
<root>...
<nameA>
        <value1>value</value1>
        <value2>value</value2>
        <value3>value</value3>
</nameA>
<nameB>
        <value4>value</value4>
</nameB>
</root>
I should have :
<root>
<FH>
<PO>
    <POH>...</POH>
    <POI>...</POI>
    <POI>...</POI>
</PO>
<PO>
    <POH>...</POH>
    <POI>...</POI>
    <POI>...</POI>
</PO>
</FH>
</root>
Thanks very much for your help and opinions
Jean-Charles.
Edited by: Jean-Charles CARRET on Jan 3, 2011 6:12 PM

Thank you Stephan for your answer.
Firstly, could you confirm whether the "row" elements under the root tag are on the same level than other elements (POH, POI, FF and FH) or not ?
I just check the both following parts of the help documentation called :
- [Inserting MessageTransformBean in the Module Processor|http://help.sap.com/saphelp_nwpi711/helpdata/en/57/0b2c4142aef623e10000000a155106/frameset.htm]
- Using the dispatcher : Example
For me, it is not clear.
1. Do I need to create an external class (XSLT Library for example) to manipulate my XML data before passing it to the standard Flat File Conversion tool ? (Here the manipulation would be to remove the row XML elements)
2. Where is located the famous "Data" directory in which I must put my xsl file ?
Thanks for clarifications.
Jean-Charles

I open a donwloaded file from an e-mail and a file conversion box appears.The characters are all wierd.

I can not open a downloaded file from an e-mail or off the web w/o a file conversion box popping up.It shows options to open with msoffice word but I choose that and it opens with all the characters that are weird looking. There is also the issue where every time I open up Mozzila there are portions of advertisements that look like they are in Japanese. I go to the View in the top bar then select Character Encoding.The unicode is selected so I switch to Western (ISO-8859-1) and everything is normal. I close the browser and restart and it goes back to the way it was with the Japanese looking text.

You can convert the PDF text to regular text (.txt) and then import/open into another program and make your changes, then save the file in the programs format (for your later editing) and then choose Print from the program and there may/may not be a option to save as PDF again.
You'll need a free (limited use) PDF to text utility like
PDF OCR
http://solutions.weblite.ca/pdfocrx/
Trouble here of course is you lose all the formatting and have to reformat, but it's a lot less expensive than Adobe's software.
LibreOffice is free to use and can save as PDF format if iWork doesn't save as PDF, it should unless Apple is really peeved at Adobe.

File conversion is not working

File conversion is not working.

Using online services and it simply times out. I login and upload the file
I want converted and it takes 5 mins or longer and then simply says the
file conversion failed.
I got one file to work, but it took like 12 tries.
Very annoying and it's impossible to call and get a tech person to help.
On Tuesday, February 11, 2014, PECourtejoie <[email protected]

ACVHD files to Blu-ray, can I use FCP?

I am about to buy a Duo Quad 2.66Ghz Mac Pro, 12gb, Raid, ATI 4870 etc. I have tones of ACVHD (.mts) files of family/holiday footage of my Sony CX12 which I want to put on Blu-ray disc. Indeed Apple doesn't support Blu-ray but I read that you can plug in a (say) LG blu-ray burner and put it on disc via FCP, am I right to assume this? I am a novice with computers and often the talk about native realtime edditing etc goes well over my head.
Just a simple question, can I edit (multiple time lines, titles) my Sony ACVHD files in FCP and burn them to Blu-ray disc?

Take a read here on the procedures with Blu-Ray and Macs...
http://www.kenstone.net/fcphomepage/taming_the_wildblu.html
and
http://www.kenstone.net/fcphomepage/taming_the_wild_blu2.html
Jerry

Video File Conversion and Adobe AIR

Hello guys
I want to work on a simple app which will actually convert large size video files to small size video files. It will be a multiformat (and atleast supports .flv)
But i have no idea where to start!
I mean how to achive this file conversion thing.
Any blog, library or resource will be highly appreciated appreciated
Bunch of Thanks

Thanks a lot for the reply
I have not yet tried Alchemey, Is it available to download?
Secondly, I want to do all the conversion locally, So MERAPI might be a good choice, Let me try it
Thanks once again

ACVHD file conversion in Compressor?

Similar Messages

Maybe you are looking for