AD Authentication in swf file

Dear Experts,
I have enabled Windows AD Authentication for BO 4.1 (InfoView, CMC, IDT) and successfully able to log in with AD.
I have one swf file which is on BEx Connection directly. I am able to run the swf with Enterprise Authentication but I am not able to run swf file with AD Authentication ?
Error message while trying to login with Windows AD -
Cannot Access External Data
- Active directory Authentication failed to log you on. Please contract your system administrator to make sure you are a member of a valid mapped group any try again. If you are not a member of the default domain, enter your user name as UserName@DNS_DomainName, and then try again. (FWM 00006).
Thanks for your support.
With Regards,
Rishit Kamdar

Hi All
I have set the SPN with the domain name of the service account . All the domains in AD are in the same forest and there is 2 way trust between each domains
SETSPN.exe –A BOBJ/eu.xyz.net abc
IN the CMC i mentioned the
Default Domain : EU.XYZ.NET
SPN - BOBJ/eu.xyz.net
MY Krb5.ini file is as below
[libdefaults]
default_realm = EU.XYZ.NET
dns_lookup_kdc = true
dns_lookup_realm = true
udp_preference_limit = 1
default_tgs_enctypes = rc4-hmac
default_tkt_enctypes = rc4-hmac
[realms]
EU.XYZ.NET = {
default_domain = EU.XYZ.NET
kdc = HostnameDC1.EU.XYZ.NET
AP.XYZ.NET {
default_domain = AP.XYZ.NET
kdc = HostnameDC2.AP.XYZ.NET
The users from EU(default domain) are able to login into infoview. But when the users from AP domain login they are facing the below error in foview
Code:
Account Information Not Recognized: Active Directory Authentication failed to log you on. Please contact your system administrator to make sure you are a member of a valid mapped group and try again. If you are not a member of the default domain, enter your user name as UserName@DNS_DomainName, and then try again. (FWM 00006)
I enabled the debug function in C:\WINNT\bscLogin.conf. And here is the error message:
Code:
Debug is true storeKey false useTicketCache false useKeyTab false doNotPrompt false ticketCache is null isInitiator true KeyTab is null refreshKrb5Config is false principal is null tryFirstPass is false useFirstPass is false storePass is false clearPass is false
[Krb5LoginModule] user entered username: [email protected] Acquire TGT using AS Exchange
[Krb5LoginModule] authentication failed
Cannot get kdc for realm AP.XYZ.NET
Please let me know where i m doing wrong
Regards,
Pavithra

Similar Messages

User log in issue with Xcelsius SWF file

HI,
I am using the BI as source to BO. Xcelsius dashboard is using webi data by live office.
I have exported the xcelsius in swf file & ppt format.
i am using the credentials user name, password and authentication as SAP.
I have the roles which are created in BI and imported to BO and the roles have users in BI , which came by default to BO.
Now I have created the new users in BI with initial password. I cant login to infoview or swf until i change the initial password in BI and thn with new password i can log in to BO. I understood this concept.
But confusing part is after changing to new password in BI, i can be able to log in to swf or PPT but not fetching latest data from data base.
if i log on first into infoview , thn i can be able to log onto swf file or PPT correctly and access the latest data.
If i directly access the ppt file , i get 'failed to get the document information. lo 26315". But if i login to infoview first then to swf or ppt i wont get any problem.
The problem is, users are access the dashboard file from ppt and pdf. So , is there any work around that, the new user can directly access the data from swf or ppt, without entering the infoview???

Hi sapbi83 ,
May i Know which connection you are using for fetching data into xcelsius, is it LO(Live Office) or Qaaws
if it is Live Office then what is the refresh property set for live office object? and how many live office objects or how many qaaws connection u are using.?
provide the answe of all the above question, i'll be able to help you and Infoview has nothing to do it with the real time data connectivity. the dashboard is completely dependent on the connections used to get data into the xcelsius, if the error is coming in PPT or PDF standalone then there is some issue with the connection used in xcelsius, just let me know the answer of all the above questions.

Delete an swf file after download

This is the situation: after a client load external content
from an http server into his flash movie, a copy of the
file for the external content (say, an SWF file) is stored
in the "Temporary Internet Files" folder.
To protect the external content, is it possible to
automatically
remove this file, after the loading is done? This should of
course be built into the client movie. Within ActionScript,
there seems to be no delete file function of any sort.
Is it possible to do it by loading a javascript or ASP page?
Any suggestions would be appreciated.

Thanks for all your answers,
which have really helped me
to put things in perspective.
Let me make the situation more
explicit. I am going to use
an empty movieClip as a container.
All the Flash codes/graphics will be
loaded dynamically into this
container during run time from
a server, with user authentication.
There are two separate issues:
(1). Whether the client would
be able to access these external
contents on the server, after
cracking the container swf.
On the server side, there
are authentication routines,
so that a user must be verified
before he could load any external
contents. I can hide all related
scripts/functions on the server
side (via FMS or http server), so
that a user does not know what I
am doing. In fact, I could copy
to-be-loaded-contents into a scratch
directory just before loading,
and then the server side script
will delete these contents
after loading. So this
part should be as safe as my
authentication method, even if a
hacker has decompiled my swf.
(2). Whether the client
would be able to get hold of
the contents on his local
machines, since these
contents are loaded into
the container movieClip. This
part I am not sure. I thought
that if the files were not saved
on the disk as temp files and
if my connection was secured/
encrypted using https,
then it would be difficult for
a client to get hold of the
content swf files. But you guys
seem to be saying that a client can
still get it somehow.

Unable to play audio stream in a swf file

Making a swf file that reacts like a button: it plays sound
when you pass over it. Or should play. When the button keyframes
sound options are set to "start" or "event", there is no problem,
it works well. But it doesn't work if I set to "stream". My
original file is an mp3. Is there something special avout it? Help
tutorials didn't help me so far...

With "stream" you have to make sure there are enough frames
in the movie to play the whole sound file. Try adding some frames
and see if it plays then.

IE running under XP can't handle multiple SWF files, Why?

I noticed that IE 8 running under Windows XP cannot handle multiple swf files in one page.
Up to about 10 files is no problem they are loaded and we can play them ( buttons that start a small audio file).
But more of these files in one page will stop IE.
Firefox ( 3.6.28) runs them fine.
And also IE 8 and/or Firefox under Windows 7 handles them perfectly.
Has anyone any idea what can cause this and how to resolve this?
Thanks,
Onno Tomson
The Netherlands

Sorry...I still don't get it. What is it about Windows FUS that keeps iTunes from running running the process twice? It can run many other non-Apple windows apps in multiple user sessions (commercial apps, open source apps, audio/video apps, networked apps). I can even run two different virtual machines at the same time under two different user sessions.
Why can iTunesHelper.exe run twice but iTunes.exe cannot? Why can I run Safari at the same time? Quicktime Player runs fine under multiple user sessions.
Blaming it on Windows and/or FUS sounds like FUD. Can anyone give a valid technical reason? Semaphores? Mutexes? An admission (and explanation) that the Windows version is purposely crippled?

How do I edit a .swf file in edge animate? How do I save it as a swf file?

Hello, I need to edit the actionscript in a swf animation file. How do you do that with Edge animate?

There is no such workflow for swf files.
Edge animate only understands html, javascript. SWF files are alien to it.
You should be using Flash Professional CC, for generating the swf files.
hth,
Vivekuma

How do I script SWF files instead of JPG files in XML loader?

I have a SWF loader (greensock.com platform) and a thumbnail image scroll underneath it made of small image buttons. Each image button has a link which loads a new SWF file into the SWF loader above. Here is the code for each button which loads the bigger SWF file into the loader above:
Button3.addEventListener(MouseEvent.CLICK, Button3_PlayPopUp);
function Button3_PlayPopUp(event:MouseEvent): void {
    //setting the sourceVar
    sourceVar="3.swf";
    //making the SWFLoader load
    //as setting the soureVar after the SWFLoader is created won't do anything unlesss
    //I also re-create the SWFLoader with the new sourceVar when the button is clicked
    loader_howToLoader2.url = sourceVar;
    loader_howToLoader2.load(true);
Then I decided to load all button via XML loader. I followed the tutorial on XML loaders which deals with loading jpg images and assigning URL links to them in the following manner first in XML file:
<image src="appThmb_imgs/appThmb_imgs117x175/A-illuminatorUpLit_117x175.jpg" title="UpDownGlowingVase" url="http://www.888acolyte.com"/>
and then in AS3 like this:
var xmlLoader:URLLoader = new URLLoader();
thisOne.link = imageList[item].attribute("url");
function clickScrollerItem(e:MouseEvent):void {
//trace("clicked item " + e.currentTarget.itemNum + " - visit url: " + e.currentTarget.link);
var urlRequest:URLRequest = new URLRequest(e.currentTarget.link);
try {
navigateToURL(urlRequest);
catch (e:Error) {
// handle error here
trace(e);
My question is: How do I apply the code to each individual small thumbnail button to load a bigger image into the SWF loader above? Do I have to add something to XML file or this way it will never work with jpg images? Can url in XML file set the source var (//setting the sourceVar), since they are all individual and then somehow apply the making SWL loader to load part (//making the SWFLoader load) as a standard somewhere in the AS3 code?

O.K. Here is my COMPLETE function.
xmlLoader.addEventListener(Event.COMPLETE, LoadXML);
function LoadXML(e:Event):void {
    trace("xml load complete");
    xmlData = new XML(e.target.data);
    //trace(xmlData.image); //we'll see each image xml element listed in the output panel with this xmlList
    buildScroller(xmlData.image); //rather than trace the xmlList, we send it to our buildScroller function
//build scroller from xml
function buildScroller(imageList:XMLList):void{
    trace("build Scroller");
    //var scroller_x:int=0;
    for (var item:uint = 0; item<imageList.length();item++) {
        var thisOne:MovieClip = new MovieClip();
        //thisOne.img_width=imageList[item].attribute("width");
        //outline
        var blackBox:Sprite = new Sprite();
        blackBox.graphics.beginFill(0xFFFFFF);
        blackBox.graphics.drawRect(-1, -1, 86, 128);//-1,-1 places rectangle 1px left and up.86, 128 draws rectangle 1px wider on all sides of placed image dimenstions of 84x126
        thisOne.addChild(blackBox);
        //scroller_x += thisOne.img_width + 20;
        //var currentX = currentImageWidth+spaceBetween;//modified line to adjust variable thumb widths
        thisOne.x = (84 + padding) *item;//84 is the width of the loaded images and 15 (which was before paddign var) is the padding
        //thisOne.x = scroller_x;//modified line to adjust variable thumb widths
        thisOne.itemNum = item;
        thisOne.title = imageList[item].attribute("title");
        thisOne.link = imageList[item].attribute("url");
        thisOne.src = imageList[item].attribute("src");
        thisOne.alpha = 0;//makes all thumb images at alpha=0 before they are fully loaded
        //trace(thisOne.itemNum, thisOne.title, thisOne.link, thisOne.src);
        //Loading and Adding the Images
        //image container
        var thisThumb:MovieClip = new MovieClip();
        //add image
        var ldr:Loader = new Loader();
        //var url:String = imageList[item].attribute("src");
        var urlReq:URLRequest = new URLRequest(thisOne.src);
        trace("loading thumbnail "+item+" into Scroller: " + thisOne.src);//url
        ldr.load(urlReq);
        //assign event listeners for Loader
        ldr.contentLoaderInfo.addEventListener(Event.COMPLETE,completeHandler);//tells us when the loading is complete
        ldr.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, errorHandler);//tells us if there are any typo errors when the loading is complete
        thisThumb.addChild(ldr);
        thisOne.addChild(thisThumb);
        //create listeners for this thumb
        thisOne.buttonMode = true;//makes boxes act as buttons
        thisOne.addEventListener(MouseEvent.CLICK, clickScrollerItem);//makes boxes act as buttons
        thisOne.addEventListener(MouseEvent.MOUSE_OVER, overScrollerItem);//traces the title when the mouse is over the bounding box in the Output Panel
        thisOne.addEventListener(MouseEvent.MOUSE_OUT, outScrollerItem);//traces the title when the mouse is out the bounding box in the Output Panel
        //add item
        scroller.addChild(thisOne);
But I am not sure if I expressed myself clearly. All what you have indicated happens. Images are being loaded and url strings are working. I can not figure out how to tweek the code so instead of url specified in xml file I can load swf image into the SWF loader on the same screen?

Flash .exe or swf files will not play on Vista

I decided to learn how to create captions for flash video,
using CS3. I tested this project and it worked fine. I could just
double-click on the app or the swf and the captioned video played
fine on my Mac. I only had Flash (CS3) on my Mac, so I created the
files there.
I then published an exe to move over to my Vista machine.
When I double-clicked on the file, it brought up Flash Media Player
version 9, but only showed a blank white box. Very frustrating.
After some research, I read that Windows Vista was not
compatible with Flash Media Player 9. Only 10.02xxx or later (I
forget the exact version - it was long) was supposed to work with
Vista. Since CS3 uses version 9 to pack into the executable (PC) or
app (Mac) projector files, I thought maybe this was the problem.
So I downloaded the demo of Flash CS4, thinking this version
would pack version 10 into the projector and this would solve my
problem.
While the CS3 version of my saved flash video project would
open in Flash CS4, it would not play when I tested the movie inside
Flash CS4. It would just show a skin at the bottom of the video
player only (with a play/pause button), and it had moving blue bars
on the skin like it couldn't really load either.
I then decided to create the whole flash video with captions
from scratch under Flash CS4. This time when I tested the movie in
Vista, it worked fine. When I published either the projector exe or
the html/swf combination, it worked fine. So proudly (and finally!)
I sent the exe over to my boss. But..... you guessed it. The Flash
Media Player 10 that started up when the file was double-clicked
just showed a blank white screen again!
So then I moved the exe over to another partition to test to
see if there was some dependent directory pathway saved as part of
the flash video file. The exe wouldn't play on the other partition!
So I thought I was onto something. I then tried moving files that I
thought the exe might be dependent on (although isn't the point of
a projector to be stand alone?) to the same directory on this
partition as the flash exe projector file.
I ended up moving the captions.xml file, the swf files (flash
video player skins included), and the html file that the swf file
is supposed to be embedded in. NOTHING worked.
I even read that someone with this problem saved his Flash
CS4 file as a Flash CS3 file before he published it, and that
worked for him. So I tried that too, but with no joy.
So I am totally stumped. Does anyone out there have advice or
even a solution?
Much Thanks,
Chuck

HI
You can use FlashJester Jugglor to create one EXE file by
adding the FLV in
the Additional Files section.
Try it
http://www.jugglor.com
Let us know if you have any further questions.
Regards
FlashJester Support Team
e. - [email protected]
w. - www.flashjester.com
DISCLAIMER:
This email message is intended only for the addressee(s) and
contains
information that may be confidential and/or copyrighted. If
you are not the
intended recipient please notify the sender by reply email
and immediately
delete this email. Use, disclosure or reproduction of this
email by anyone
other than the intended recipient(s) is strictly prohibited.
All measures
have been taken to ensure this email is virus free - however
no warranty is
made that this email or any attachments are free of viruses.
Virus scanning
is recommended and is the responsibility of the recipient.

Can Captivate 7's playback controls control Flash swf files?

Hi folks,
I have created a swf file using Adobe Flash and I have imported it as an animation slide in Captivate 7. I have turned on the playback controls to just have the play button and the progress bar. When I export the presentation, the playback controls do not work. The scrubber moves as the presentation is playing, but I can't pause the presentation. When I stop the scrubber or even move it left or right, it does not affect the presentation and it just keeps playing. Am I doing something wrong? I don't want to have to create a custom nav bar in Flash as it would just be easier to use Captivate's playback bar.

I don't think it can be expained quickly as it can be very complicated. But...
Select New Project/Widget in Flash and choose static widget. You need to be very adept in AS3 to actually get them to work.

Dreamweaver CS5 wont loop .swf file???

Hi there,
I am having a problem where i am trying to get a swf file to loop. I read on another thread that there is a bug in dreamweaver and although it automatically selects the loop button in the property inspector it does not add the code. But when i correct the code it still doesn't work! here is the code i am using:
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="550" height="400" id="FlashID" title="openingsequence">
    <param name="movie" value="1.swf" />
    <param name="quality" value="high" />
    <param name="wmode" value="opaque" />
    <param name="swfversion" value="6.0.65.0" />
    
    <param name="expressinstall" value="Scripts/expressInstall.swf" />
    <param name="LOOP" value="true" />
    
    
    <object type="application/x-shockwave-flash" data="1.swf" width="550" height="400">
      
      <param name="quality" value="high" />
      <param name="wmode" value="opaque" />
      <param name="swfversion" value="6.0.65.0" />
      <param name="expressinstall" value="Scripts/expressInstall.swf" />
      <param name="LOOP" value="true" />
      
      <div>
        <h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
        <p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" width="112" height="33" /></a></p>
      </div>
      
    </object>
    
</object>
I have also read that it could be because the code for the .fla file has a <stop/> value at the end instead of the code to make it loop. I made the swf file from an mp4 in flash so ive never had the original .fla file. I have tried using a swf decompiler to get the fla file but it doesnt seem to have worked but this is a side issue...
I really just want to figure out how to get dreamweaver to loop my swf file.
Can someone please help me, ive spent all day trying to solve this!
thanks,
Matt

Hi
You wrote -
I made the swf file from an mp4 in flash so ive never had the original
.fla file. I have tried using a swf decompiler to get the fla file but
it doesnt seem to have worked but this is a side issue...
First welcome to the forum.
Unfortunately without being able to edit the stop() function out of the fla file, your swf will not loop.
You could use the html5 video element for your mp4 and if you have the original video file convert it to other formats for use in the html5 video, and then use the swf file as the fall back, this would allow your video to loop in those browsers that support this.
There are also 3rd party players available that will allow the swf to loop without editing but these will only work on windows.
PZ

Why does the audio in my .SWF file not play in a Browser?

I created an .swf file using ffmpeg, containing H.264 video and MP3 audio. The file plays perfectly in VLC but not in a Browser (Chrome/IE). I tried analyzing the file using a trial version of Flash decompiler. Again, only the video plays. The strange thing is that if I extract the MP3 from the file, it plays perfectly using any of th eplayers. It seems to be a muxing issue which VLC apparently handles, but not the player in the browser! Why? Thanks for any pointers.

Yeah. Sorry to say this but many people buy the various brands of format converters, which are everywhere on the Web and which also spam these boards – and often find they are not only out the purchase price but that the app created as many problems as it solved.
Russ

File size of .swf files exported from Indesign CS5

I have made a basic file (728 x 90 px) in Indesign, which is the size of banner ads we produce. I have not put on any effect or animation yet. When I export it as a swf file, the file size is 139kb. This is way too large for any banner advertising on websites where the highest is normally 100px and the smallest is 30kb.
I have tried exporting at a lower resolution, but it has no effect on the file size, rendering this useless as a flash export option for me.
Is there something I'm missing or is Indesign just not the right tool for flash banner ads.
Thanks

Mr Met
{swf file that's 13MB. What are your images, 200MB each?}
As I said, I resampled the images to be 500px wide so each PShop image is about 1.4mb (single layer). There are 12 images used.
Here it is if you care to see i t- 11mb so it will take time to load
http://wgdesigngroup.com/10/elaine/elaine.html
Jongware
{The Right Tool for the Right Job ...}
No doubt you are a 100% right here.
But I think it is a bit disingenious to blame the InDesign user for the feature. It would be like Abobe putting Drop Shadows and transparences into ID and then saying you should use PhotoShop to for that feature!
Brian

Problem with FLVPlayer in Flash CS3 (need to save out as Actionscript 3.0 SWf file)

I am using Flash CS3 and am trying to publish a SWf file that
makes use of the "FLVPlayback" component. I need for this SWF file
to be published as an Actionscript 3.0 file, so I have set my
publish settings to Flash Player 9.0 and Actionscript 3.0, but keep
getting an error as follows:
"WARNING: The component 'FLVPlayback' requires ActionScript
2.0."
Has anyone encountered this?? I am doing something wrong? I'm
pretty comfortable within Actionscript/Flash 2.0, but am only
beginning my first steps into the relam of CS3 and AS3.
I have also attached a screenshot of the files that represent
my FLVPlayback component (or so I assume). (see this link for
attachments
http://www.actionscript.org/forums/showthread.php3?t=140886)
Thanks all,
Mark
http://www.actionscript.org/forums/showthread.php3?t=140886

Mark,
> I have set my publish settings to Flash Player 9.0 and
Actionscript
> 3.0, but keep getting an error as follows:
>
> "WARNING: The component 'FLVPlayback' requires
ActionScript 2.0."
Gotcha. You must have started the document in AS2, then
changed the
publish settings. Each version of the language has its own
version of the
FLVPlayback Component (written in the relevant language).
Start over and
compare two compleley new FLA documents: make one for AS3 and
one for AS2.
Open the Components panel and note the differences between
the two. There
are a different set of Components depending on the language
chosen for the
document. Drag the FLVPlayback Component from the Components
panel in an
AS3 document, and you'll have the AS3 version.
David Stiller
Co-author, Foundation Flash CS3 for Designers
http://tinyurl.com/2k29mj
"Luck is the residue of good design."

Problem with link in SWF file

good day to you all in this great forum
my name is james and i want to see if i can find help here in the forum for my problem.
I'm building a site for my friend. (the site is in hebrew so sorry....)
for the site building I'm using the software iweb - on mac.
the site is almost complete but i have 1 big problem.
this is the link to the site - [URL="http://www.skip-up.com"]skip-up[/URL]
I'm using a head menu in flash
i have this flash from some template i downloaded from the internet and all i had to do is change the buttons names and to change the links of the buttons to point to my html pages.
and now to the problem :
to get to the problem in general - the flash head links don't work
if i press it in the site on godaddy nothing happens i just don't see the flash head and instead i dee a page that says something like "the page can not be found"
if i go to my desktop to my site directory and press the links the only thing that happened is that the button is changing the color like I'm in the right page but I'm still in the original page.
and the strange thing is that by if i only open up the SWF file and press the links are working
and it's open up my browser and to the right page
1. you can see the structure of the site here in this page :
[IMG]http://farm4.static.flickr.com/3442/3962332346_432d004df2.jpg[/IMG]
what i have is the master index.html and 2 directories : - the first one
called flash and have 1 flash file (this file is o.k with no problem)
and the other directory had all my site files
2. like i said i got the original FLA file and all i did is changing the buttons
names and changing the links of the buttons
the links i changed in the actions menu - i just searched for the original
url and change the names to much my website html pages names
3. here is the original FLA actions menu - you can see that I'm standing on
one of the links :
[IMG]http://farm4.static.flickr.com/3483/3961893129_2b8fc4ecd9.jpg[/IMG]
and here is my fla after the changes - as you can see i just changed the
name:
[IMG]http://farm3.static.flickr.com/2544/3962668872_8693f399ba.jpg[/IMG]
4. i uploaded all my site (it's small zip file) if someone wants to see more
i tried to describe everything in details because it's very important for
me to find a solution [URL="http://rapidshare.com/files/286059228/skipupsite.zip.html"]skip-up site download[/URL]
I'm really hopping there's somebody that will be kind to help me out
thank you very much

Hi. It looks like your code is not finding the mp3. At least,
I can reproduce your error code by removing the mp3 from the
directory, or renaming it.
Btw, if you test with FF instead of IE, you'd see the error:
Error #2044: Unhandled IOErrorEvent:. text=Error #2032:
Stream Error.
at KZFlash_fla::Sound_2/KZFlash_fla::frame1()
Hope that helps.

STRANGE problem with sound in SWF files...Please help if you know how...

Hello,
Okay, so, I recently learned how to use Adobe InDesign to create a book. there is a lot a still don't know. When I export my document as a SWF file, it works great and has sound and animations where it should. However, if I move that SWF to a new location, such as my desktop or uploading it to an e-mail, it looses all the sound information. To add sound to each page, I added a hidden object to each page that was the sound file so that I could attach it to a button. It seems that it is loosing that sound file if I move it to a new location. Any ideas or solutions?

UPDATE: I have learned that my problem is related to a "resourse folder" which must go wherever the file goes in order for it to have sound. This is a bit inconvinient for me, as my client is computer illiterate. I really want to find a way to just embed the sound into a file that you can just open and play. To the best of my knowlege, SWF format is the only format that allows for the page turning animation. Does anyone know a way to embed the sound into the SWF file or am I SOL here?

AD Authentication in swf file

Similar Messages

Maybe you are looking for