AD authentication problems. Problems with groups mapping

Hi Everyone,
I have my Edge Xi R2 server up and running with AD authentication fine for the past few months. Today I added another group and got a weird error message. Now no AD works and everytime I try to re-enable it I get this message below. I have deleted all my mapped groups and I still get the message. Has anyone come across this problem before?
If the problem persists, please delete and re-map into BusinessObjects Enterprise all currently mapped groups
Thank you,
Adam

This error indicates that one or more of your mapped groups, is invalid. (check for SID's in the error or windows event viewer logs)
You can open a message with support to get help tracing your CMS, or you can try to figure out which (groups may cause hti error.
To note it's also possible that something else is preventing the CMS from communicating with AD again a good reason to open a ticket.
Regards,
Tim

Similar Messages

E52 internal GPS fix problem only with OVI Maps

Hi all,
I read many many E52 phones suffer Internal GPS fix problems.
I don't beleve this is an hardware problem, but only a software bug.
My experiments say this:
1) Start phone, start Ovi Maps -> No lock at all. (only 1 blinking line in bottom left corner)
2) Start phone, start McGuider (Sygic) navigator -> E52 locks quite immedeately. (in the same place!!)
3) After GPS is locked, start Ovi Maps again. Now also Maps works great!
4) Also the gps built-in application under Menu->Applications->GPS->GPS Data has the same behaviour as Ovi Maps.
Anyone can try and report this or similar experience?
Thank you!

uallaualla wrote:
Thank you for the response.
I'm sure the fix is faster if i use A-GPS, but i i have to pay for data connection.
And, above all, Sygic works perfectly WITHOUT A-GPS, so why Ovi Maps does not?
Yes, you have to pay, but the connection takes about 20sec. About Sygic you're right I noticed that too. It locks pretty fast.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Problem working with Group Shots

some clips are attached to groups through red lines, some through blue lines. what does this mean?
is there a way to auto-arrange clips? shots browser is looing pretty messy here...

snippet from debug log...
Mon Mar 06 11:11:05 2006 URL::parseHeaders: StatusLine set to [400 Bad Request]
Mon Mar 06 11:11:05 2006 parsed all headers OK
Mon Mar 06 11:11:05 2006 sendResponse() : uref->getStatus() = '400'
Mon Mar 06 11:11:05 2006 Going to send headers to the client. Status :400 Bad Request
Mon Mar 06 11:11:05 2006 Content Length Unknown

Issue with group mapping in ACS.

When we map AD group in ACS with ACS group it coming as AD group and * (As below â ,* â ) , Because of this * everybody is able to login irrespective of his AD group.
Please suggest way to only add the NT Group alone without the *.

Actually '*' means something else.
If you have a group on AD say 'Alfa'
when you do a mapping on ACS, you'll see it like this,
'Alfa', * ------- Group x
Above means, if a user a member of Group 'Alfa' on AD, AND can also have any other group membership on AD (meaning of *), then map it to Group x on ACS.
It does not mean map everyone to Group x, even if they are not a member of Group 'Alfa' on AD.
As mentioned by JG above, all the users are able to authentication because of your 'All other combination' or \DEFAULT mapping on ACS.
Map them to .
Then only those will be able to log in, for whom you have the mapping defined on ACS.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.1/user/GrpMap.html#wp940538
Check Step 8,
"The asterisk (*) at the end of each set of groups indicates that users who are authenticated with the external user database can belong to other groups besides those in the set."
Regards,
Prem

ISE wired TLS with group mapping

Hi. We authenticate wired clients using EAP-TLS with Computer Certificates. This works fine so far. Now we need an authorization with LDAP and set the VLAN based on the AD Group of the Computer. Is there a way to use the CN of the Certificate and retrieve the Attributes of the Client over LDAP?
Does anybody know how this could be done?
Regards,
Urs

You should be able to do this, as long as the cn name is in the corrext format which for computer certificates it ahould be fine. Setup the ldap external store, find the grouo and map that to your authz policy.
Sent from Cisco Technical Support Android App

AD group mapping failure

I'm using an ACS version Release 3.2(3) Build 11 and i have proxy distribution table active without stripping domain names (user@domain). Whenever ACS consults AD as external database, user is authenticated but group mappings don't work!! users are authenticated and are inserted into Default usergroup.
Is there some way to avoid this behavior and somehow configure AD to pass the Group name and, therefore allow the correct authentication within the correct group mapping.
Nuno

Hello,
finally I have good news, The W2k3(R2) caused this issue. I installed the RA on a member server running W2k3 standard edition and magically RA start working and authintication had ben done successfully.
Note:
This recommendation not from the TAC enginner, from a gentleman experienced the same issue before.
Many thx

ACS 3.3 Windows group mapping problem

Hi,
I?m running Cisco Secure ACS v.3.3 at Win 2000 server(sp4). ACS server is member of AD domain X. Additional there are two AD forests, so: domains X and Y are in the same forest, but domain Z is member of the second one. Trust relationships between all domains are established (AD Domain Controllers are w2k3 srv). I need to add Windows AD group mapping and that's no problem in domains X & Y. But when I'm trying to map some groups from Z domain, the "Failed to enumerate Windows groups. If you are using Active Directory consult the installation guide for information." error appears. In ACS documentation I have found information "ACS can only perform group mapping by using the local and global groups to which a user belongs in the domain that authenticated the user. You cannot use group membership in domains that the authenticated domain trusts that is for ACS group mapping. This restriction is not removed by adding a remote group to a group that is local to the domain providing the authentication." As I understand it's impossible to add mapping from the second forest? Am I right? If problem is solved in newer versions of ACS (4.0, 4.1)? Are there any fixes that can help?
Thanks,
Peter

You need to set up proxy.
http://www.microsoft.com/technet/prodtechnol/winxppro/deploy/ed80211.mspx
Look for "Cross-Forest Authentication" in above link. And you get the Idea of what I mean. Though in above link its depicted with IAS server, but same is possible with ACS, as both can act as Radius server.
There is a known bug, CSCsi04187
PEAP MS-CHAP machine authentication will fail with machine not found if host/ format is sent from client. This only happens if the machine is autenticating to a domain forest that the ACS is not a member of.
Conditions:
The Machine authenticating to ACS is in a different domain forest then the ACS and the supplicant is using host/ as the machine name format. You also have to be using PEAP MS-CHAPv2.
Workaround:
If the supplicant has the option you can send the macine name in hos/ format.
Many supplicants do not have this option.
It is to be fixed for ACS 4.2 release.
Regards,
~JG

RSA authentication with LDAP group mapping

Greetings,
I'm trying to set up RSA authentication with LDAP group mapping with ACS Release 4.2(1) Build 15 Patch 3.
The problem I'm having is that my users are in multiple OU's on our AD tree. When I only put our base DN in for User Directory Subtree on ACS, it fails with a "External DB reports about an error condition" error. If I add an OU in front of it, then it will work fine.
As far as I know, you can only use one LDAP configuration with RSA.
Any thoughts on this?

@Tarik
I believe your suggestion is the only way i'm going to get this to work. I ran across a similar method just this week that I have been working on.
I was hoping for dynamic mapping with the original method, but I haven't found any way to make it happen. I have resorted to creating a Radius profile on the RSA appliance for each access group I need. Using the Class attribute, I then pass the desired Group name to the ACS, i.e. OU=Admins, and that seems to work.
Thankfully, I have a small group of users that I am attempting to map. I will only map those who need elevated priviliges to narrow down how many profiles I will have to manually create. Likewise, our Account Admin will have to determine who gets assigned a particular access group.
I would still prefer to do this dynamically.
Scott

Lync 2013 Error 31055 ,31059 LS Call Park Service, The database being used by Group Pickup is not the appropriate version and There was a problem communicating with the Group Pickup backend database.

Hello
I have Lync 2013 and 2010 , still i didn't finish my migration completely from 2010 to 2013 .this is coexistence environment that contains both Lync Server 2010 and Lync Server 2013 .
There was no error's in my lync 2013 front end and back end server's and every thing was fine, yesterday I installed windows updated AND CU for my lync 2013 front end and backend server's .
later on after restarting both the front end and the back end server's i start having hundred's of these error's related to "LS Call Park Service".
so any advice for these issue ? and what is the effect for these error .
below is the error I got .
The database being used by Group Pickup is not the appropriate version.
The database is not the correct version:
Connection: Data Source=HQ-LYNC2013-BE.aaaaaaaaaaaaaaaaaaaaaaaaaaa\rtc;Initial Catalog=cpsdyn;Integrated Security=True
Expected... SchemaVersion: 1, SprocVersion: 1, UpgradeVersion: 2
Actual... SchemaVersion: 0, SprocVersion: 0, UpgradeVersion: 0
Cause: The database has not been upgraded.
Resolution:
Upgrade the database to CU1.
==============================================================
There was a problem communicating with the Group Pickup backend database.
There were problems accessing SQL server:
Connection: Data Source=HQ-LYNC2013-BE.aaaaaaaaaaaaaaaaaaaaaaaaaa\rtc;Initial Catalog=cpsdyn;Integrated Security=True
Message: The EXECUTE permission was denied on the object 'DbpGetVersionSchema', database 'cpsdyn', schema 'dbo'.
Error code: -2146232060
Error number: 229
Cause: This may be caused by connectivity issues with the backend database.
Resolution:
Check if SQL backend is running and accepts connections from Group Pickup.
=============================================================================
Kind Regards
MK

Hello
thanks Holger for u r replay .
due to the Microsoft article about the cu :
I run only :
Install-CsDatabase -ConfiguredDatabases -SqlServerFqdn FEBE.FQDN -Verbose
Note In a coexistence environment that contains both Lync Server 2010 and Lync Server 2013 and in which the Central Management Service is located on a Lync Server 2010 pool, do not run the
Install-CsDatabase -CentralManagementDatabase command. If you later move the Central Management Service to a Lync Server 2013 pool, you have to run the
Install-CsDatabase -CentralManagementDatabase command to apply the changes.
here is what I get on my power shell after i run the command : "WARNING: Warning: Failed to execute batch --"
PS C:\Users\MK> Install-CsDatabase -ConfiguredDatabases -SqlServerFqdn HQ-LYNC2013-BE.MyDomain -Verbose
VERBOSE: Creating new log file
"C:\Users\MK\AppData\Local\Temp\2\Install-CsDatabase-82d6613c-f2e3-47e6-8fc4-8f75d2efe6e4.xml".
VERBOSE: Install databases required by Lync Server role(s).
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.BlobStore'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rtcxds.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.AbsDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rtcab.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsConfigDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rgsconfig.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsDynDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rgsdyn.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.CpsDynDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database cpsdyn.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.ArchivingDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\arc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database LcsLog.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.MonitoringDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\mon. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database LcsCDR.
VERBOSE: Assigning "BackendStore:BlobStore:LogPath" to F:\CsData
VERBOSE: Assigning "BackendStore:RtcSharedDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "ArchivingStore:ArchivingDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "MonitoringStore:MonitoringDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "MonitoringStore:QoEMetricsDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "ArchivingStore:ArchivingDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "MonitoringStore:MonitoringDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "MonitoringStore:QoEMetricsDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "ABSStore:AbsDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "ApplicationStore:RgsConfigDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "ApplicationStore:RgsDynDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "ApplicationStore:CpsDynDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "BackendStore:BlobStore:DbPath" to F:\CsData
VERBOSE: Assigning "BackendStore:RtcSharedDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "ABSStore:AbsDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "ApplicationStore:RgsConfigDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "ApplicationStore:RgsDynDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "ApplicationStore:CpsDynDatabase:DbPath" to F:\CsData
VERBOSE: Installing "BackendStore" on HQ-LYNC2013-BE.MyDomain\rtc, collocated: False
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.BlobStore'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rtcxds.
Checking state for database rtcxds.
State of database rtcxds is DbState_RequiresMinorUpgrade.
Database rtcxds set to mode Restricted.
Dropping all procedures, functions and views from database rtcxds.
Executing RtcDb.sql...
Adding master role...
Setting owner for database rtcxds to sa.
Creating login MyDomain\RTCHSUniversalServices.
Creating user MyDomain\RTCHSUniversalServices.
Creating Schema MyDomain\RTCHSUniversalServices.
Creating login MyDomain\RTCUniversalReadOnlyAdmins.
Creating user MyDomain\RTCUniversalReadOnlyAdmins.
Creating Schema MyDomain\RTCUniversalReadOnlyAdmins.
Creating login MyDomain\RTCUniversalServerAdmins.
Creating user MyDomain\RTCUniversalServerAdmins.
Creating Schema MyDomain\RTCUniversalServerAdmins.
Adding account MyDomain\RTCHSUniversalServices to role ConsumerRole.
Adding account MyDomain\RTCUniversalReadOnlyAdmins to role ConsumerRole.
Adding account MyDomain\RTCHSUniversalServices to role ReplicatorRole.
Adding account MyDomain\RTCHSUniversalServices to role PublisherRole.
Adding account MyDomain\RTCUniversalServerAdmins to role PublisherRole.
Setting database version: Schema Version 15, Sproc Version 13, Update Version 2.
Setting the database rtcxds to multi user mode.
Database rtcxds is set to multi user mode.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RtcSharedDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rtcshared.
Database created by script "RtcSharedDatabase" already exists and is current.
VERBOSE: Successfully installed the database. For details, see the following log:
"C:\Users\MK\AppData\Local\Temp\2\Create-BackendStore-HQ-LYNC2013-BE.MyDomain_rtc-[2014_11_13][14_35_01].log"
VERBOSE: Installing "ABSStore" on HQ-LYNC2013-BE.MyDomain\rtc, collocated: False
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.AbsDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rtcab.
Checking state for database rtcab.
State of database rtcab is DbState_RequiresMinorUpgrade.
Database rtcab set to mode Restricted.
Dropping all procedures, functions and views from database rtcab.
Executing RtcAbTypes.sql...
WARNING: Warning: Failed to execute batch --
-- Copyright (c) Microsoft Corporation. All rights reserved.
exec sp_addrole N'ServerRole'.
Executing RtcAbDb.sql...
Setting owner for database rtcab to sa.
Creating login MyDomain\RTCComponentUniversalServices.
Creating user MyDomain\RTCComponentUniversalServices.
Creating Schema MyDomain\RTCComponentUniversalServices.
Adding account MyDomain\RTCComponentUniversalServices to role ServerRole.
Setting database version: Schema Version 62, Sproc Version 42, Update Version 3.
Setting the database rtcab to multi user mode.
Database rtcab is set to multi user mode.
VERBOSE: Successfully installed the database. For details, see the following log:
"C:\Users\MK\AppData\Local\Temp\2\Create-ABSStore-HQ-LYNC2013-BE.MyDomain_rtc-[2014_11_13][14_35_20].log"
VERBOSE: Installing "ApplicationStore" on HQ-LYNC2013-BE.MyDomain\rtc, collocated: False
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsConfigDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rgsconfig.
Database created by script "RgsConfigDatabase" already exists and is current.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsDynDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rgsdyn.
Database created by script "RgsDynDatabase" already exists and is current.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.CpsDynDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database cpsdyn.
Checking state for database cpsdyn.
State of database cpsdyn is DbState_RequiresMinorUpgrade.
Database cpsdyn set to mode Restricted.
Dropping all procedures, functions and views from database cpsdyn.
Executing CpsDyn.sql...
Setting owner for database cpsdyn to sa.
Creating login MyDomain\RTCComponentUniversalServices.
Creating user MyDomain\RTCComponentUniversalServices.
Creating Schema MyDomain\RTCComponentUniversalServices.
Creating login MyDomain\RTCUniversalReadOnlyAdmins.
Creating user MyDomain\RTCUniversalReadOnlyAdmins.
Creating Schema MyDomain\RTCUniversalReadOnlyAdmins.
Creating login MyDomain\RTCUniversalServerAdmins.
Creating user MyDomain\RTCUniversalServerAdmins.
Creating Schema MyDomain\RTCUniversalServerAdmins.
Adding account MyDomain\RTCComponentUniversalServices to role ReadWriteRole.
Adding account MyDomain\RTCUniversalServerAdmins to role ReadWriteRole.
Adding account MyDomain\RTCUniversalReadOnlyAdmins to role ReadOnlyRole.
Setting database version: Schema Version 1, Sproc Version 1, Update Version 2.
Setting the database cpsdyn to multi user mode.
Database cpsdyn is set to multi user mode.
VERBOSE: Successfully installed the database. For details, see the following log:
"C:\Users\MK\AppData\Local\Temp\2\Create-ApplicationStore-HQ-LYNC2013-BE.MyDomain_rtc-[2014_11_13][14_35_37].log"
VERBOSE: Installing "ArchivingStore" on HQ-LYNC2013-BE.MyDomain\arc, collocated: False
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.ArchivingDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\arc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database LcsLog.
Database created by script "ArchivingDatabase" already exists and is current.
VERBOSE: Successfully installed the database. For details, see the following log:
"C:\Users\MK\AppData\Local\Temp\2\Create-ArchivingStore-HQ-LYNC2013-BE.MyDomain_arc-[2014_11_13][14_35_51].log"
VERBOSE: Installing "MonitoringStore" on HQ-LYNC2013-BE.MyDomain\mon, collocated: False
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.MonitoringDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\mon. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database LcsCDR.
Checking state for database LcsCDR.
Checking state for database LcsCDR.
State of database LcsCDR is DbState_RequiresMinorUpgrade.
WARNING: The database LcsCDR being updated has data file path at
\\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\DbPath\LcsCDR.mdf and supplied data file path is
\\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\DbPath\LcsCDR.mdf. Supplied path will be ignored.
WARNING: The database LcsCDR being updated has log file path at
\\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\LogPath\LcsCDR.ldf and supplied data file path is
\\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\LogPath\LcsCDR.ldf. Supplied path will be ignored.
Database LcsCDR set to mode Restricted.
Dropping all procedures, functions and views from database LcsCDR.
Executing CdrDb.sql...
Setting owner for database LcsCDR to sa.
Creating login MyDomain\CSAdministrator.
Creating user MyDomain\CSAdministrator.
Creating Schema MyDomain\CSAdministrator.
Creating login MyDomain\RTCComponentUniversalServices.
Creating user MyDomain\RTCComponentUniversalServices.
Creating Schema MyDomain\RTCComponentUniversalServices.
Adding account MyDomain\RTCComponentUniversalServices to role ServerRole.
Adding account MyDomain\RTCComponentUniversalServices to role ReportsReadOnlyRole.
Adding account MyDomain\CSAdministrator to role ReportsReadOnlyRole.
Setting database version: Schema Version 39, Sproc Version 82, Update Version 2.
Setting the database LcsCDR to multi user mode.
Database LcsCDR is set to multi user mode.
SQL Server Agent is running and its start mode was detected as Auto.
Executing CdrJobs.sql...
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.QoEMetricsDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\mon. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database QoEMetrics.
Checking state for database QoEMetrics.
Checking state for database QoEMetrics.
State of database QoEMetrics is DbState_RequiresMinorUpgrade.
WARNING: The database QoEMetrics being updated has data file path at
\\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\DbPath\QoEMetrics.mdf and supplied data file path is
\\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\DbPath\QoEMetrics.mdf. Supplied path will be ignored.
WARNING: The database QoEMetrics being updated has log file path at
\\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\LogPath\QoEMetrics.ldf and supplied data file path is
\\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\LogPath\QoEMetrics.ldf. Supplied path will be ignored.
Database QoEMetrics set to mode Restricted.
Dropping all procedures, functions and views from database QoEMetrics.
Executing QoEDb.sql...
Setting owner for database QoEMetrics to sa.
Creating login MyDomain\RTCComponentUniversalServices.
Creating user MyDomain\RTCComponentUniversalServices.
Creating Schema MyDomain\RTCComponentUniversalServices.
Adding account MyDomain\RTCComponentUniversalServices to role ServerRole.
Setting database version: Schema Version 62, Sproc Version 90, Update Version 1.
Setting the database QoEMetrics to multi user mode.
Database QoEMetrics is set to multi user mode.
SQL Server Agent is running and its start mode was detected as Auto.
Executing QoEJobs.sql...
VERBOSE: Successfully installed the database. For details, see the following log:
"C:\Users\MK\AppData\Local\Temp\2\Create-MonitoringStore-HQ-LYNC2013-BE.MyDomain_mon-[2014_11_13][14_35_51].log"
VERBOSE: No changes were made to the Central Management Store.
VERBOSE: Creating new log file
"C:\Users\MK\AppData\Local\Temp\2\Install-CsDatabase-82d6613c-f2e3-47e6-8fc4-8f75d2efe6e4.html".
WARNING: "Install-CsDatabase" processing has completed with warnings. "5" warnings were recorded during this run.
WARNING: Detailed results can be found at
"C:\Users\MK\AppData\Local\Temp\2\Install-CsDatabase-82d6613c-f2e3-47e6-8fc4-8f75d2efe6e4.html".
PS C:\Users\MK>
I hope some one can confirm no issue with what I did ??
Kind Regards
MK

Problem with user mapping

Hello,
We got a problem with user-mapping to a SAP system.
We create a SAp system, and an alias to this system.
We add a user mapping for the administrator (user, not group). Check for connector is OK.
Now, we make the same user-mapping for a group.
if the user also belongs to the group "administrator" this mapping works, otherwise this fail with a message <b>"com.sapportals.portal.ivs.cg.SystemNotFoundException: Got null system object for alias R3HR".
</b>After checking, there is no user-mapping for the "administrator" group, nor for the roles that belong to that group, nor for the user.
So, it seem that the alias is only visible for an admin.
does any one got an idea ? we are on SP14, Linux.
regards
Guillaume PATRY

HI Guillaume,
The user mapping is available for both Admin as well as end users.
Open your system from System Administration>System Configuration>System Landscape.
In the property editor,in dropdown for property category,
select the logon method as UID?password and User Mapping type to admin/user.
Then you can create a Group,map the system alias for this group and add users to this group.
Also,in the property editor for the system,from dropdown for display,select permissions , and add the group to asssigned permissions as READ ONLY and select the checkbox for ENDUSER.
Hope,this resolves your problem.
Regards,
Siddhartha

I have a problem when using Google Maps, at some point my computer blanks the window and says there's a problem with display drivers, and it has recovered,but it doesn't. Problem doesn't happen with Int Explorrer, so I do not believe it is the computer

When using google maps through Firefox, after asking for a place which is not the general North America section which routinely comes up, the firefox screen goes white, with a narrow banner at the top. A message appears in the lower right corner which says something about display drivers having had a problem, but now have recovered. However the display doesn't recover and the banner message is that Firefox is not responding. When I go to restart Firefox if I go to the restore point, the page is still frozen out.
I do not believe it is a problem with my computer because it doesn't happen if I use I.E. to go to google maps, then G-maps works normally.
This phenomenon did not happen before the latest upgrade to either Google or Firefox. I have used Fiefox for a number of years and also Google Maps on previous computers and on this one, and not had this before.
This is a relatively young computer (Asus EeSlate 121) less than a year old. I have used Firefox since I bought it and until recently had no problem with Google Maps.

I solved it myself, after the "note" which came back from FF/Mozilla just as I finished my message, commenting on what it was that my system had , I wnnt back to check my plug-ins etc. I downloaded the latest Java, BOTH 32bit AND 64 bit versions and latest Firefox.
Now all is working.
Thanks,
B.

Problem with Grouping in Interactive Forms by Adobe

Hey Guys!
I have a problem using the group function for a table in Interactive Forms by Adobe and I have not found a solution yet, so I hope anybody can help me.
I've created the table in the LiveCycle Designer using subforms and I want to use the group function for a specific field of my table. Now the problem is that the entries of the table are not shown grouped for the same values of my specific field but there is still one row for each entry. How do I have to edit binding, flow etc. for the subforms of a group?
I hope anybody can help me or provide me a better solution.
Thanks in advance.
Martin

Hi Otto,
thanks for your reply.
I'm sorry the 'grouping function' I've announced is called 'control levels' in English I can set this function for a field of a table in the context of the form in the transaction SFP in SAP. Then in the hierarchy the field is displayed above the group of the other fields of the table. Usually in the form this should lead to a 'grouping' for the specific field so if you have identical values there is just one entry in the form and all the rows that have this value should appear behind. My problem is that there is still one entry in the form for every row.
Right now I'm using the solution you mentioned with the nested tables but i have some problems with the layout and page breaks (pagination).
Thanks for your help.
Martin

Problem about SSO using logon ticket with user mapping

Hi everyone ,
I had done SSO with Portal , BW and R/3 system.
I use logon ticket with user mapping .
When user name is same in Portal as in R/3 system, or user name is same in Portal as in BW , user can access R/3 transactions and BW report without logon.
There are some Portal users name which are different with R/3 user and BW user. And I done the user mapping for these user.
But some user mapping works fine,but most of them can't work,means that most of them need to enter mapped user ID and password.
What's the reason?
When SSO using logon ticket with user mapping, the Portal user which is different with R/3 user and BW user, can they access R/3 transaction iview and BW report iview without logon?

Hi Chen,
What you have done is correct. But the problem lies here.
Since you are using the same system object for accessing the iview, where the ticket method is set to SAPLOGONTICKET in the user Management property of the system object.
To avoid this create another system object like the previous one but set the logon method to UIDPW and select admin, user from the drop down box. Also create a system alias for this system.
Now create another iview like the previous one but link this iview to the new system. Now do the user mapping for the users which are different in portal compared with R/3. Now you should be able to login without any problems.
Another important point is login to portal with Fully qualified domain name. In the ITS property of the system object also give the FQDN.
Hope this helps
Regards
Arun

Problem with Mulit Mapping/Message Split

Hi,
I am a newbie to XI trying to set up a file2file scenario with multi-mapping/message splitting without BPM.
System is XI 3.0 SP14
Scenario is:
read an XML-File and multiply it and write 2 XML-files using the File adaptor.
For reference I used "multimapping without BPM".
- setting occurancy of Message types to unbounded in both Message Mapping and Interface Mapping.
- using the RB_Split button
- setting up one business service containing 2 message interfaces and 2 communication channels for output.
Designing and Konfiguring worked fine.
File is read but no file is written.
XML-Moni tells me "Mapping did not create Messages"
I did extensive studies in sap.help, forum and various blogs. Also to verify Messagetypes and Kommunication channels I set up similar file2file scenario without splitting. Nothing really helped.
Any clues?

Hi again,
very efficient method to test XML-source file. - Thanks.
Unfortunately it did not solve my problem.
Again: "Split mapping did not create messages"
Below you can find a part of the trace created when processing this message:
<Trace level="3" type="T">Multi mapping required.</Trace>
<Trace level="3" type="T">Creating Java mapping com/sap/xi/tf/_MM_data_duplic_async_.</Trace>
<Trace level="3" type="T">Load ac6179b0-a92e-11da-be15-e51f0a000472, http://MyTutorial/SHeinz05, -1, com/sap/xi/tf/_MM_data_duplic_async_.class.</Trace>
<Trace level="3" type="T">Search com/sap/xi/tf/_MM_data_duplic_async_.class (http://MyTutorial/SHeinz05, -1) in swcv ac6179b0-a92e-11da-be15-e51f0a000472.</Trace>
<Trace level="3" type="T">Loaded class com.sap.xi.tf._MM_data_duplic_async_</Trace>
<Trace level="2" type="T">Call method execute of the application Java mapping com.sap.xi.tf._MM_data_duplic_async_</Trace>
<Trace level="2" type="T">Java mapping com/sap/xi/tf/_MM_data_duplic_async_ completed. (executeStep() of com.sap.xi.tf._MM_data_duplic_async_</Trace>
<Trace level="3" type="T">Nachrichtentyp 1 Anzahl der Nachrichten 0</Trace>
<Trace level="3" type="T">Nachrichtentyp 2 Anzahl der Nachrichten 0</Trace>
<Trace level="1" type="E">CL_XMS_PLSRV_MAPPING~ENTER_PLSRV</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 005</Trace>
<Trace level="3" type="T">Message version 005</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="3" type="System_Error">Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message Status = 014</Trace>
<Trace level="3" type="T">Message version 006</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</SAP:Trace>
Test of MM and IM is always successful.
Any clues?

ExcelXML mapping---problem with XML maps in Excel sheet

Hi Friends,
I have one issue with ExcelXML mapping in Xcelsius.
The problem is I have designed one dashboard using ExcelXML mapping and everything is working fine but I was afraid that I could not able to find the mappings which were embedded in Excel.It happened many times.What I was doing is everytime Im re-mapping.I could be a big problem for me to do this procedire for everytime.How to recover my XML maps into excel sheet.Can anyone please provide the solution to achieve this.

Shouldnt it be equivalent ? I mean, as far as I know the ns0: shouldnt be a problem
when you have a namespace in the message then you need to associate it with some prefix....since ns0 (or any other prefix) is not present you are getting the error....having the namespace but not ns0 is the problem.
XMLAnonymizer bean may help you to add the namespace prefix...

AD authentication problems. Problems with groups mapping

Similar Messages

Maybe you are looking for