AD changes not replicating when I move a DC to the correct site
I have created a site in AD Sites and Services for our branch office. However, when i place the RWDC in the correct site replication stops. New user accounts and changes made to that DC do not replicate back to us.
I am pretty sure there is not a firewall issue because everything works fine when the site is moved back to the same site with the other two domain controllers. However, my goal is to make sure that users authenticate to the geographically closest
DC.
There is a site-link created between the two sites.
The correct subnet (a /20) is assigned to the site.
I ran the AD Replication Status Tool with no errors, but when i create a test user on the branch office DC it does not replicate back over to the other DC's.
Any tips on what i should look for/try next?
Hi,
You can check the replication status using the below command,
repadmin /showrepl
To initiate the replication the local_DC and target_DC use the below command,
repadmin /showreps target_DC_name
Checkou the below link on initiating replication between Active Directory Direct Replication Partners
http://support.microsoft.com/kb/232072/en-us
Checkout the below link on similar discussion,
http://social.technet.microsoft.com/Forums/windowsserver/en-US/59e25e9c-fecd-46cd-87d1-103440b36a0f/after-moving-additional-domain-controller-server-to-another-site-replication-fails-with-in-sites?forum=winserverDS
Regards,
Gopi
JiJi Technologies
Similar Messages
-
How control can be customized so that it changes its picture when mouse moves over it
How control can be customized so that it changes its picture when mouse moves over it. As it happens in other develpment enviroments that one can customized the look 'n feel of any thing during the mouse movement over that very thing. Moreover can any body plz tell me that how one can modify the funtionality of a control by him self (not selecting the available functionalities of controls and indicators)
The attached LV 7.1 code uses an event configured to trigger on two controls when a "Mouse Enter" or a Mouse Leave" event occurs. Depending on the type key focus is either assigned or removed.
Please elaborate on the Q re: customizing a control.
Ben
PS Do NOT change the boolean to an indicator, save, run, change to control, save run again. That is bad.
Forgot to attachMessage Edited by Ben on 05-05-2005 09:30 PM
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction
Attachments:
MouseOver.vi 28 KB -
My security answers are not accepted when downloading movies. Why
My security answers are not accepted when downloading movies.TRIED restting the security question that did not work. Called apple support --- no help.
I'm at a lost PLEASE HELPReset Security Questions
Frequently asked questions about Apple ID
Manage My Apple ID
Or you can email iTunes Support at iTunes Store Support.
If all else fails:
Go to: Apple Express Lane;
Under Product Categories choose iTunes;
Then choose iTunes Store;
Then choose Account Management;
Press Continue;
Now choose iTunes Store Security and answer the bullet questions, then click Continue;
Sign in with your Apple ID and press Continue;
Under Contact Options fill out the information and advise iTunes that you would like your security/challenge questions reset;
Click Send.
You should get a response within 24 hours by email.
Presently there appears to be problems on Apple's end, so it may be quite some time before they respond.
Another user had success doing the following:
I got some help from an apple assistant on the phone. It is kind of round about way to get in.
Here is what he said to do and it is working for me...
on the device that is asking you for the security questions go to "settings", > "store" > tap the Apple ID and choose view"Apple ID" and sign in.
Tap on payment information and add a credit/debit card of your preference then select "done", in the upper right corner
sign out and back into iTunes on the device by going to "settings"> "store" > tap the Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you should be asked to verify your security code for the credit /debit card and NOT the security questions.
At this time you can remove the card by going back in to edit the payment info and selecting "none" as the card type then saving the changes by selecting "done". You should now be able to use your iTunes store credit without answering the security questions.
It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
Good Luck friends! -
Security question answers are not accepted when renting movies. Why? How do you correct?
Correct Security answer are not accepted when renting movies.
Why? How do I correct the problem so I can watch movies?Reset Security Questions
Frequently asked questions about Apple ID
Manage My Apple ID
Or you can email iTunes Support at iTunes Store Support.
If all else fails:
Go to: Apple Express Lane;
Under Product Categories choose iTunes;
Then choose iTunes Store;
Then choose Account Management;
Press Continue;
Now choose iTunes Store Security and answer the bullet questions, then click Continue;
Sign in with your Apple ID and press Continue;
Under Contact Options fill out the information and advise iTunes that you would like your security/challenge questions reset;
Click Send.
You should get a response within 24 hours by email.
Presently there appears to be problems on Apple's end, so it may be quite some time before they respond.
Another user had success doing the following:
I got some help from an apple assistant on the phone. It is kind of round about way to get in.
Here is what he said to do and it is working for me...
on the device that is asking you for the security questions go to "settings", > "store" > tap the Apple ID and choose view"Apple ID" and sign in.
Tap on payment information and add a credit/debit card of your preference then select "done", in the upper right corner
sign out and back into iTunes on the device by going to "settings"> "store" > tap the Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you should be asked to verify your security code for the credit /debit card and NOT the security questions.
At this time you can remove the card by going back in to edit the payment info and selecting "none" as the card type then saving the changes by selecting "done". You should now be able to use your iTunes store credit without answering the security questions.
It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
Good Luck friends! -
W64, cs6 bridge when I move or copy files the context menu does not retain recent folder destinations after I close the program. The context options that show are the ones from original install. The workspace I set up is also gone. I have every explorer box and cleaner checked to save recent. Had to disable nivedia desktop software because of weird display conflict. Have Dell pro support and they cannot fix. Any ideas to help me with this would be appreciated.
Self-solved! I work in column view in Finder so get there in a Finder window with folders and files appearing.
There really is no problem, just select an ITEM in the COLUMN before right-clicking!
The "old" context menu will appear. If you click in the white space in that column (or anywhere in a Finder window) and then place the cursor over a folder or file WITHOUT selecting it and right-click you will bring up the secondary context menu - Open, Copy, Duplicate, View Options and a greyed out Labels option. No "Move to Trash". -
why my panorama not scrolling when i move my cell phone as it was before, any special setting?? i need an answer please
Welcome to the Support Communities. This Apple doc may be of interest:
Channel Member Code of Conduct
Kings74 wrote:
They told my friend that the phone was not available in Black, that was the 5, and that the 5s was only available in silver and gold..
A minor point, but it may avoid a little confusion if, instead of saying "black" in reference to the iPhone 5s, say "space gray":
"iPhone 5s — Available in silver, gold, and space gray" (Source) -
Worst update ever! On my Vista everything is wrong! Back button never active; If I want open pages as new tab it opens new window; FF starts with blank page instead of Google; No url address shown on status bar when I move mouse arrow on the link etc.. Please Help!
Try the Firefox SafeMode to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.'' -
When i move my video into the timeline its zoomed in..how do i fix this? Please tell me what I can do to fix this. I may need to be walked through the process.
Your sequence settings do not match the footage specs.
Mylenium -
Some of my iPhoto albums will not show, as below:
When I click on any of those individual albums, for a brief split second I can see the images displayed, but then they revert to this:
Then if I click on any of those images, this image appears:
I have real a lot of posts that say to click Command+Option while opening iPhoto and this will open the Photo Library Repair window, but... this is not happening. Each time I do it, iPhoto just opens as it normally does. I've tried about 10 times, closing iPhoto completely. I've tried through the dock icon and through the applications listing. Neither will open anything other than regular old iPhoto.
Can anyone help me and suggest what I may be doing wrong, or are there any alternative was to open Photo Library Repair so I can rebuild my library? I really don't want to lose all of those photos, especially since some are really important and irreplaceable.
Thanks.I have real a lot of posts that say to click Command+Option while opening iPhoto and this will open the Photo Library Repair window, but... this is not happening.
Be sure you're holding the correct keys and that you're holding them long enough. Depress them before clicking on iPhoto and don't let go until the menu shows up.
If you don't want to lose those photos, make a back up now. Hopefully it's not too late. -
I sometimes have blue and red square-shaped dots appear on my MBP; especially but not exclusively when I'm watching videos. The dots don't stay in the same place; and also they are not there all the time. Also, sometimes my animations (applications opening, windows being dragged, etc.) will glitch as well. Again, this is not a continual thing; it just happens variously throughout my day. MBP Model A1212, OS X 10.6.8, 2.33 Ghz 3GB RAM.
Did the original songs that do not appear on the car player play in the Music app on the iPod? Sometimes glitches happen and they do not. Also, If y ohave a 5G iPod/iOS 7, purchase songs will show with an cloud icon by them if they are not downloaded if Shall All is turned on in Settings>iTunes and App Store
-
Imported analog video successfully and it is normal in the "Event" pane but when I move a clip into the "Project" pane, it enlarges it slightly and distorts it. How can I keep that from happening?
Hi
Turn off analyze/image stabilization.
Yours Bengt W -
When i move my cursor to the top left corner of the screen, I am automatically logged off. Is it a software problem or is it a feature I can turn off?
I don't think there is an option for logging off in the Hot Corners, but check Mission Control System Prefs, Hot Corners button. What is set in the top, left.
-
i am trying to load my iphone3 via my computer, but it gives a message that device not connected, when it is clearly showing on the control panel
Hi glomp,
From the information provided, it sounds like your device may not be fully recognized by iTunes. Here are two articles (depending on your computer's operating system) for troubleshooting this:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Have a good one,
- Ari -
When i move my computer screen, the desktop start to jump as if the connections are being shorted
when i move my computer screen, the desktop start to jump as if the connections are being shorted
Maybe the are shorted by a faulty display cable? Do you see the same error on an external attached Monitor/TV/Beamer?
-
When i move my wireless mouse, the whole screen on the computer moves...how can i fix this?
When i move my wireless mouse the whole computer screen moves. How can I fix this?
Welcome to the Apple Support Communities
It looks like zoom is turned on. To turn it off, open System Preferences > Universal Access, and turn Zoom off
Maybe you are looking for
-
0HR_PT_3 Load is taking too much time when i execute the Info package
Dear All, i am working on HR Module. i am extracting data from 0HR_PT_3 from R/3 PRD system through info package its taking long time to load data. I have checked in RSA3 in R/3 PRD system whenever i extract "0HR_PT_3" instead of showing records it
-
Alert monitor for messages in error status
Hi, it is possible to configure de Xi Alert Monitor to show in the message body the error that shows the message monitoring? In the SOAP header when there is an error y can see a tag "error" and it shows this info (for example): - <SAP:Error xmlns:SA
-
1 . Everytime I open flash it always say my license had expired so im thinking 1,000 dollars for flash for 3 months I unistall it and It still show FLV videos I double click it again and it says the same message I don't get it I uninstalled it alread
-
Datagrid item renderer numberstepper tabIndex
I have a datagrid with a item renderer in it that contains a numberStepper. There are two columns that have number steppers in them. If I hit tab when I am in the first number stepper I want it to tab to the second one. I have tried setting a tabInde
-
Hi, I am wondering if someone could perhaps shed some light on this matter. Over the past few days we have tried using various Voip/Sip C# applications in attempt to initiate a call from these applications to a user running Lync. We are testing again