AD connectors fail after Update Rollup 5 installation

Colleagues,
We have SCSM 2012 R2 in our organzation and recently installed Update Rollup 5. After that we've started expiriening problems with AD connectors. They can finish with errors or not finish at all and be in running state for the whole day. The only solution
is to restart HealthService and re-syncronize connectors. Connectors recreation didn't help. Also there are no relevant logs in event viewer. Do you have similar problems after UR5 installation or any ideas how this can be troubleshooted and fixed?

Hi,
Will you please try to re-install UR5?
Make sure you install it with order :
1. DataWarehouse Server
2. Primary Management Server
3. Secondary Management Servers
4. All Analyst consoles
5. Self-Service Portal
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

BB Tour Fails after Update

Like others, I get the clock on white, then black screen of death, then more clock on white. The difference is, mine won't stop. It just keeps going and going and going. From what I can tell on the BlackBerry website, I need to pay someone to help me resolve the problem (????). Am I missing something?? PLEASE HELP!

Mine failed after update too. Device will not even turn on now and if I plug it into the usb the red light comes up but still no screen. tried taking out battery and replacing but still nothing...

Mobile connection fail after updating apple 4s to ios 6.1.3

Mobile connection fail after updating apple 4s to ios 6.1.3
intertnet and other online applications are not working after updating to apple iphone 4s to ios 6.1.3
what is the solution for this......

try resetting your network settings.
Settings.app -> General -> Reset - > Reset Network Settings
CMIIW

Oracle report out of order after update Rollup for windows 2000 sp4

hi
i am having a problem in oracle report printing (2000,6i). I have installed patch "update Rollup for windows 2000 sp4" on windows 2000. now when i send report(132 column) for printing to the printer, the report fails to expand to 132 columns and data is printed in unformated fashion. in order to print the report correctly i have to remove the patch from the windows. Is there anyway to print the report without uninstalling windows patch?
thanks

Hi
first of all thanks for replying .if you mean defining page size in files like wide180.PRT in printers folder in oracle directory, off course i have set parameters. thing is that printing works fine without windows patch but it gets deteriorated after installing the patch.
Thanks

PeopleSoft connector failing after upgrade

Has anyone heard of the Peoplesoft connector failing to connect after a PeopleTools upgrade? We have 9.1.1.5 of the Peoplesoft User Management Connector installed. Prior to the upgrade of PeopleTools, it was on version 8.50.09 and we were able to connector and provision users. After the upgrade to PeopleTools 8.50.16, we cannot connect. Below is a piece of the log file where we are getting this error:
DEBUG,18 Apr 2011 11:03:33,015,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader:findClass - Data: loading class - Value: oracle.iam.connectors.psft.usermgmt.integration.PSFTUMUserProxyProvisionManager
DEBUG,18 Apr 2011 11:03:33,026,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader/findClass entered.
DEBUG,18 Apr 2011 11:03:33,026,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader:findClass - Data: loading class - Value: psft.pt8.joa.API
DEBUG,18 Apr 2011 11:03:33,027,[OIMCP.PSFTUM],oracle.iam.connectors.psft.usermgmt.integration.PSFTUMUserProxyProvisionManager : getConnectionWithTimeout:: STARTED
DEBUG,18 Apr 2011 11:03:33,027,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader/findClass entered.
DEBUG,18 Apr 2011 11:16:09,519,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader/findClass entered.
DEBUG,18 Apr 2011 11:16:09,519,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader:findClass - Data: loading class - Value: bea.jolt.JoltVersionException
DEBUG,18 Apr 2011 11:16:09,522,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader/findClass entered.
DEBUG,18 Apr 2011 11:16:09,523,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader:findClass - Data: loading class - Value: psft.pt8.joa.PSMessage
ERROR,18 Apr 2011 11:16:09,524,[OIMCP.PSFTUM],====================================================
ERROR,18 Apr 2011 11:16:09,524,[OIMCP.PSFTUM],oracle.iam.connectors.psft.usermgmt.integration.PSFTUMUserProxyProvisionManager : getConnectionWithTimeout : Unable to connect to Application Server. Try :: 1
ERROR,18 Apr 2011 11:16:09,524,[OIMCP.PSFTUM],====================================================
ERROR,18 Apr 2011 11:16:09,524,[OIMCP.PSFTUM],====================================================
ERROR,18 Apr 2011 11:16:09,524,[OIMCP.PSFTUM],oracle.iam.connectors.psft.usermgmt.integration.PSFTUMUserProxyProvisionManager : getConnectionWithTimeout : Previously created Session Destroyed : 1
ERROR,18 Apr 2011 11:16:09,524,[OIMCP.PSFTUM],====================================================
DEBUG,18 Apr 2011 11:16:09,524,[OIMCP.PSFTUM],oracle.iam.connectors.psft.usermgmt.integration.PSFTUMUserProxyProvisionManager : getConnectionWithTimeout:: FINISHED
INFO,18 Apr 2011 11:16:09,524,[OIMCP.PSFTUM],oracle.iam.connectors.psft.usermgmt.integration.PSFTUMUserProxyProvisionManager : connect : Connect = false
ERROR,18 Apr 2011 11:16:09,524,[OIMCP.PSFTUM],====================================================
ERROR,18 Apr 2011 11:16:09,524,[OIMCP.PSFTUM],oracle.iam.connectors.psft.usermgmt.integration.PSFTUMUserProxyProvisionManager : connect : Maximum Retries Reached. exiting........
ERROR,18 Apr 2011 11:16:09,524,[OIMCP.PSFTUM],====================================================
DEBUG,18 Apr 2011 11:16:09,524,[OIMCP.PSFTUM],oracle.iam.connectors.psft.usermgmt.integration.PSFTUMUserProxyProvisionManager : closeSession:: STARTED
DEBUG,18 Apr 2011 11:16:09,525,[OIMCP.PSFTUM],oracle.iam.connectors.psft.usermgmt.integration.PSFTUMUserProxyProvisionManager : closeSession : Session Closed : true
DEBUG,18 Apr 2011 11:16:09,525,[OIMCP.PSFTUM],oracle.iam.connectors.psft.usermgmt.integration.PSFTUMUserProxyProvisionManager : closeSession:: FINISHED
ERROR,18 Apr 2011 11:16:09,530,[PSFTUM],====================================================
ERROR,18 Apr 2011 11:16:09,530,[PSFTUM],oracle.iam.connectors.psft.usermgmt.integration.PSFTUMUserProvisionManager : createUser : Connection Failed
ERROR,18 Apr 2011 11:16:09,530,[PSFTUM],====================================================
DEBUG,18 Apr 2011 11:16:09,530,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/setAdpRetVal entered.
DEBUG,18 Apr 2011 11:16:09,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getRetValString entered.
DEBUG,18 Apr 2011 11:16:09,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getRetValString - Data: class - Value: java.lang.String
DEBUG,18 Apr 2011 11:16:09,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getRetValString - Data: poRetVal.toString() - Value: PSFT.CONNECTION_ERROR
DEBUG,18 Apr 2011 11:16:09,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getRetValString - Data: Returning:sRetVal - Value: PSFT.CONNECTION_ERROR
DEBUG,18 Apr 2011 11:16:09,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getRetValString left.
DEBUG,18 Apr 2011 11:16:09,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/setAdpRetVal - Data: Setting Adapter Return Value to PSFT.CONNECTION_ERROR - Value:
DEBUG,18 Apr 2011 11:16:09,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/setAdpRetVal left.
OIM: 9.1.0.2
Any ideas?

You will have to use the new psjoa jar. See the connector documentation for compatible psjoa jar.

Help! oracle report out of order after update Rollup for windows 2000 sp4

hello once again
i haven't received any solution of my problem, so i am again uploading it.
----PROBLEM IS GIVEN BELOW-----
i am having a problem in oracle report printing (2000,6i). I have installed patch "update Rollup for windows 2000 sp4" on windows 2000. now when i send report(132 column) for printing to the printer, the report fails to expand to 132 columns and data is printed in unformatted fashion. in order to print the report correctly i have to remove the patch from the windows.i have set all parameters and
defining page size in files like wide180.PRT in printers folder in oracle directory.
Is there anyway to print the report without uninstalling windows patch?
thanks

I don't have any idea about this issue. Maybe someone else on this forum can help. Meanwhile, there are couple of places you can search for this issue:
Search google for printing issues with this patch
Search Microsoft forums for Windows 2000
And if you have metalink account, search metalink forum, document/note or open a SR for this.

[SOLVED] Network Manager systemd unit fails after update

EDIT: Reinstalling libnm-glib resolved this issue
After updating to the latest version of NetworkManager (networkmanager-0.9.8.10-3), the systemd unit fails to start. It works fine after downgrading back to the previous version though (networkmanager-0.9.8.10-1). I'm not sure if this is a bug or an error on my end; since the previous package works I've just dowgraded for the time being. For the update that doesn't work, here is the output of "systemctl status" and the systemd journal:
>>sudo systemctl daemon-reload
>> sudo systemctl status NetworkManager
● NetworkManager.service - Network Manager
Loaded: loaded (/usr/lib/systemd/system/NetworkManager.service; enabled)
Active: failed (Result: exit-code) since Wed 2014-06-11 15:28:25 EDT; 10s ago
Process: 24073 ExecStart=/usr/bin/NetworkManager --no-daemon (code=exited, status=127)
Main PID: 24073 (code=exited, status=127)
Jun 11 15:28:25 kyle systemd[1]: NetworkManager.service: main process exited, code=exited, status=127/n/a
Jun 11 15:28:25 kyle systemd[1]: Failed to start Network Manager.
Jun 11 15:28:25 kyle systemd[1]: Unit NetworkManager.service entered failed state.
>> journalctl -xn
-- Logs begin at Tue 2014-06-10 12:47:19 EDT, end at Wed 2014-06-11 15:28:36 EDT. --
Jun 11 15:28:25 kyle sudo[24070]: pam_unix(sudo:session): session opened for user root by kyle(uid=0)
Jun 11 15:28:25 kyle systemd[1]: Starting Network Manager...
-- Subject: Unit NetworkManager.service has begun with start-up
-- Defined-By: systemd
-- Support: [url]http://lists.freedesktop.org/mailman/listinfo/systemd-devel[/url]
-- Unit NetworkManager.service has begun starting up.
Jun 11 15:28:25 kyle systemd[1]: NetworkManager.service: main process exited, code=exited, status=127/n/a
Jun 11 15:28:25 kyle systemd[1]: Failed to start Network Manager.
-- Subject: Unit NetworkManager.service has failed
-- Defined-By: systemd
-- Support: [url]http://lists.freedesktop.org/mailman/listinfo/systemd-devel[/url]
-- Unit NetworkManager.service has failed.
-- The result is failed.
Jun 11 15:28:25 kyle systemd[1]: Unit NetworkManager.service entered failed state.
Jun 11 15:28:25 kyle sudo[24070]: pam_unix(sudo:session): session closed for user root
Jun 11 15:28:28 kyle dbus[489]: [system] Failed to activate service 'org.freedesktop.nm_dispatcher': timed out
Jun 11 15:28:36 kyle sudo[24075]: kyle : TTY=pts/2 ; PWD=/var/cache/pacman/pkg ; USER=root ; COMMAND=/usr/bin/systemctl status NetworkManager
Jun 11 15:28:36 kyle sudo[24075]: pam_unix(sudo:session): session opened for user root by kyle(uid=0)
Jun 11 15:28:36 kyle sudo[24075]: pam_unix(sudo:session): session closed for user root
Last edited by T0k3n (2014-07-03 15:18:01)

Check the changes:
https://projects.archlinux.org/svntogit … e192881dc5
https://projects.archlinux.org/svntogit … ee906b6c44
When posting configs, code or command output, please use [ code ] tags, not [ quote ] tags https://bbs.archlinux.org/help.php#bbcode
like this
It makes the code more readable and - in case of longer listings - more convenient to scroll through.

Exchange 2010 update after Update Rollup 5 for Exchange Server 2010 (KB2407113)

Mine exchange server 2010 standard has Update Rollup 5 for Exchange Server 2010 (KB2407113) as latest update.
Can someone help me which update i can install after this, can i start with
Update Rollup 1 for Exchange Server 2010 SP1.
Many thanks in advance

My recommendation will be:
Remove update roll-up 5
Install SP1 check that everything is working
Install SP2 check that everything is working
Install SP3 check that everything is working
I think it will be risky for you to go straight to SP3.
Exchange Blog:
www.ntweekly.com
MCSA, MCSE, MCITP:SA, MCITP:EA, MCITP:Enterprise Messaging Administrator 2010,MCTS:Virtualization

Build failed after updating to CTP 3.1

Hi,
After updating to CTP 3.1, I created a blank cordova project and tried to build it.It shows build failed.I can see a warning - The typescript file was given no files for compilation .However this shouldn't stop the build ?
Please advise.

Set your build verbosity to diagnostic (Tools>Options>Projects and Solutions>Build and Run>Set MSBuild project build output verbosity= Diagnostic) and rebuild your project. The added details should reveal why the build is failing.
-Ellen

OWA Blank Logon Page After Update Rollup 12 for Exchange 2007 SP3

Hello
After installing Update Rollup 12 for Exchange 2007 SP3, can no longer access OWA - internally or externally through Internet Explorer - I just get a blank page (with IE). If I use Chrome or Firefox, and it uses the basic logon, I get a page with just
text, and am able to logon successfully. I have looked at several related forums, but have not found a fix yet. I've seen several people with similar issue have had success by copying contents from a previous owa folder version to the latest one, then running
Updateowa.ps1 and restarting IIS. This did not resolve the issue for me.
Another forum suggested running remove-owavirtualdirectory and
new-owavirtualdirectory, however I haven't attempted that yet, as I'm unsure how I could reverse the changes that the command runs if things get worse.
Any assistance will be appreciated.

Hi,
I encountered a same situation,after recreating
the virtual directory, the issue was solved.
The following article for you reference:
How To: Recreate OWA Virtual Directory – Exchange 2007
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support

Aperture fail after updating to snow leopard

after updating to snow leopard, aperture 3 is not working - i have downloaded aperture update 3.1.1, but now it is saying i must have aperture 3 when i try to run it - which i already have???, any help greatly appreciated, thanks.

Doh! - It had "original" in the filename. Renamed it and run the update successfully... All working well, thanks for your patience... Still getting used to Macs.
Thanks again.

DPM 2012 R2 unable to connect to Database after failed Update Rollup 4 Installation

We have a DPM 2012 R2 Server with SQL Server 2012 installed locally.
We tried to install Rollup 4 for DPM 2012 R2 (KB3009516) using Windows Update
and it failed with error code 0x80070643. Now when we open the DPM Console
it is totally empty (no Protection Groups, Servers, Disks, just like a fresh install).
In the eventlog we get a lot of Errors and warnings:
Event 941 (MSDPM)
Unable to connect to the DPM database. Make sure that SQL Server is running and that it is configured correctly.
Cannot open database "DPMDB" requested by the login. The login failed.
Event 4209 (MSDPM)
The description for Event ID 4209 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
DPM Writer encountered an internal error. Please restart the DPM Writer service, and then try the backup operation again. For additional troubleshooting information, review the application event log and the DPM Troubleshooting Guide.
Event 107 (Report Server Windows Service (MSSQLSERVER)
Report Server Windows Service (MSSQLSERVER) cannot connect to the report server database.
Event 274 (SQLISService110)
Microsoft SSIS Service:
Registry setting specifying configuration file does not exist.
Attempting to load default config file.
Then there are some Errors/warnings from SQLSERVERAGENT about failed scheduled Jobs.
I think the failed Installation changed some database Settings, so that now the DPM Console
cant access the database anymore.
I would be happy if someone can help me getting this Server working again!

Our biggest problem is, that the DPM is not working any more. So there is no chance to backup the SQL Server via DPM.
I think the main problem is that DPM have no access to the database. Every time I start the DPM Application, I get an error "verify that the DPM service is running on this computer". In the eventlog are many errors that the msdpm service was unable
to connect to DPM Database. Another "information" is that the user 'nt authority\system' failed to open the database of dpm.
We've tried to reinstall the DPM but its still the same problem. I suppose that is a corrupt database.
Tomorrow I try to restore the database and hope it will be the solution of our problem.

Toshiba EXCITE Pro - WIFI connection. Authentication failed after update

Hello.
Just received this Tablet.
Everything seemed ok while updating to the latest version (did that first to solve the heat problems).
After the last update *i lost my WIfi connection. Authentication failed* (didnt change something - was connecting - updating ok 1 minute before the last update).
After that i started testing ,Wps connection , No security Wifi etc etc.
*Finally at a random time (and with the initial settings) i got connected*. After i shut down the tablet the same problem occured.
After doing the same things again i finally got connected and this time it seems to be ok, even after i shut down the tablet.
However this is frustrating.
Maybe you have to sort this out?
I have seen and other people returning this tablet after having this problem.
It is not a hardware problem since its working ok before the update.
Of course tried factory reset twice.
Hope i dont have this problem again, *but i am informing in hope that you fix this in a future update.*

Toshiba sent me the fix for this. Figured I would use Facebook and they sorted a solution straight away.
It requires a complete reset. Not the soft reset from within Android.
I'll post it here as they will check through moderation I guess.
Thanks for sending a private message Ben. For us to get this resolved for you we would advise to perform a reset from the Android system recovery menu, to do the reset please follow these steps:
The reset process will delete any data, settings, and applications on your tablet. You must have a backup of any data you wish to keep before proceeding.
1. Make sure the tablet is off and not in standby.
2. Hold down the Volume Up and Power buttons simultaneously until the two Android icons appear.
3. Use the volume buttons to select the white box on the right.
4. Once selected, press the power button.
5. Use the volume buttons to select wipe cache partition and then press the power button.
6. Select Yes and press the power button.
7. Use the volume buttons to select wipe data/factory reset and then press the power button.
8. Select Yes and press the power button.
9. The tablet will now reset.
If you have any issues after the reset please get back to us as soon as possible!
Its been working well ever since. I guess the cache clean part might be the main one. You'll have to select the reboot yourself as I did at the end.
Might be best to use Facebook i'll see if I can find my post as the response was quick and efficient unlike their responses in here. I.e nowt from them so far.
They needed my name and serial numbers probably to log problems etc.
Message was edited by: bensimmo

[Solved] Atheros Wireless Fails after Update

After the update to kernel 3.6.37 the wireless on my Macbook pro is close to useless, but used to work very well before. Madwifi was upgraded as well but I suspect another problem.
Using WICD there is no wireless at all! With networkmanager the available networks are visible and sometimes logs on. However, the network fails quickly and starts asking for the password - most of the time it is useless typing in the password again. So the wireless is basically working but very unstable with networkmanager and non-existent anymore with WICD.
Any ideas?
Last edited by jcci (2011-02-06 05:48:20)

Found out more which might be significant for madwifi users:
According to the wiki I loaded the following modules in rc.conf: ath-hal, ath9k, wlan
Beside this one line in the modprobe.conf should be added: alias ath0 ath_pci. This way wicd as well as networkmanager used ath0 for connecting to wireless.
After the update I noticed that there is another wifi device in ifconfig listed: wlan0. So I suspected that 2 devices pointing at the same hardware may cause the instability, but de-activating one by ifconfig didn't help. Now I noticed by loading the modules one by one that the new ath9k is already defining wlan0 and the wireless starts working without loading the module wlan. It looks stable so far, but if I should be right I'm impossibly the only one having this trouble.
Confirmation would be nice, but I will mark this thread "solved" now.

CCC and AMD graphics card failed after updating driver

I have an HP Pavilion dv6 6c-32eg laptop.
I recently tried to update my GPU driver, as this was required to run a particular program (oclHashcat, if you're interested). I downloaded the installer from here, and ran it. It appeared to run fine, but after the required restart, the screen resolution was set to 800x600, instead of the usual 1366x768. I then recieved an error message saying something along the lines of "Your AMD driver could not be installed as you do not have the required hardware". In Device Manager the GPU had something like "windows has stopped usinig this device as it reported an error".
If I try to open CCC, the program runs for several minutes, with a relatively high CPU usage shown in Task Manager, and then the message " Catalyst Control Center: Host Application has stopped working".
I have now tried various different methods of fixing this problem, none of which have worked. Attempting to download a driver from the AMD website didn't work, as the website said the driver was not appropriate for a computer with switchable graphics.
My laptop does not appear to be using the AMD GPU, as trying to run any games as a test causes them to run slowly and with minimal resolution.
My laptop has dual (switchable, from CCC) graphics:
-An AMD Radeon HD 7690M XT card, with a driver version 8.882.2.3000, and date 30/09/2011.
-And Intel HD Graphics Family, with, apparently, the same driver version and date as above. I am unable to find out exactly what kind of Intel GPU it is.
I also tried to update the Intel graphics driver, to see if this would fix the problem at all, but it made it worse: the screen became very red, and low resolution. I fixed this by reverting to a system restore point made just before. Sadly, I did not think to do this before originally updating drivers.
My question, then, is: how to I regain full usage of both graphics cards?
Here is a copy-paste of my system information:
Spoiler (Highlight to read)
Performance Information and Tools
More details about my computer
Component Details Subscore Base score Processor Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz 7.0 5.9 Determined by lowest subscore Memory (RAM) 8.00 GB 7.5 Graphics Intel(R) HD Graphics Family 6.6 Gaming graphics 5861 MB Total available graphics memory 6.6 Primary hard disk 298GB Free (462GB Total) 5.9 Windows 7 Home Premium
System Manufacturer Hewlett-Packard Model HP Pavilion dv6 Notebook PC Total amount of system memory 8.00 GB RAM System type 64-bit operating system Number of processor cores 2 Storage Total size of hard disk(s) 1397 GB Disk partition (C 298 GB Free (462 GB Total) Disk partition (D 325 GB Free (932 GB Total) Disk partition (E 1 GB Free (4 GB Total) Media drive (F CD/DVD Graphics Display adapter type Intel(R) HD Graphics Family Total available graphics memory 6373 MB Dedicated graphics memory 2560 MB Dedicated system memory 0 MB Shared system memory 3813 MB Display adapter driver version 8.882.2.3000 Primary monitor resolution 1366x768 DirectX version DirectX 10
Performance Information and Tools More details about my computerComponent Details Subscore Base score Processor Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz 7.0 5.9 Determined by lowest subscore Memory (RAM) 8.00 GB 7.5 Graphics Intel(R) HD Graphics Family 6.6 Gaming graphics 5861 MB Total available graphics memory 6.6 Primary hard disk 298GB Free (462GB Total) 5.9 Windows 7 Home PremiumSystem Manufacturer Hewlett-Packard Model HP Pavilion dv6 Notebook PC Total amount of system memory 8.00 GB RAM System type 64-bit operating system Number of processor cores 2 Storage Total size of hard disk(s) 1397 GB Disk partition (C 298 GB Free (462 GB Total) Disk partition (D 325 GB Free (932 GB Total) Disk partition (E 1 GB Free (4 GB Total) Media drive (F CD/DVD Graphics Display adapter type Intel(R) HD Graphics Family Total available graphics memory 6373 MB Dedicated graphics memory 2560 MB Dedicated system memory 0 MB Shared system memory 3813 MB Display adapter driver version 8.882.2.3000 Primary monitor resolution 1366x768 DirectX version DirectX 10
This question was solved.
View Solution.

Hi,
There may be a 3rd party option you could try for a more updated set of gpu drivers, however I'd first suggest getting your system back to a state where the switchable graphics function correctly.
Try the System Restore first.
If that doesn't work, the AMD driver package ( containing both gpu drivers ) you require can be downloaded from HP on the following link.
http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55092.exe
Regarding being able to find a more updated set of drivers, a lot of people with your type of switchable graphics have had success with the offerings on the following 3rd party website - I would strongly recommend reading the Manual first to get an understanding of how this works and why driver signing enforcement will need to be disabled in order to load these drivers.
http://leshcatlabs.net/
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

AD connectors fail after Update Rollup 5 installation

Similar Messages

Maybe you are looking for