Ad -hoc On Call allowance

Hi firends
I have to write 1 PCR for Adhoc on call allowance
Details:Ad-hoc on call allowance will be captured from the attendance infotype 2002 based on these 2 attendance subtypes.
1.9830--Adhoc on call main 2.9840-Adhoc on call secondary.
Based on this subtypes Ad-hoc on call allowance will be paid out as follows:
                                                     Weekday             weekend
Ad-hoc on call main                            22$                       30$
Ad-hoc on call secondary                    11$                       15$
<b>Now my query is how can i code this attendance subtypes in my PCR?</b>
Thanks&best regds
Shailaja.B

Unfortunately it seems to still need a workaround.
It's not working according to our trials when you directly try to access an ad-hoc network.
If you first connect to an access point and then, while the other connection is active, connect to the ad-hoc network, it works and stores the connection.
After that, you can connect to the ad-hoc without the detour with the access point.
Very, very, very unpleasant that!!!
Could anybody from Apple make a statement whether this is know and when it will be solved?
Thanks,
Oliver

Similar Messages

HT5463 I turn the do not disturb button on and I am not given any options for setting or calls allowed. Does anyon have a fix for this?

I turn the do not disturb button on and I am not given any options for setting or calls allowed. Does anyon have a fix for this?

Do Not Disturb and Notifications
Push notifications appear in Notification Center and alert you to new information, even when the
associated app isn’t running. Notifications vary by app, but may include text or sound alerts, and
a numbered badge on the app icon on the Home screen.
Turn off all notifications: Go to Settings and turn on Do Not Disturb. When it’s turned on and
iPhone is locked, all notifications and calls are silenced, but alarms will still sound. You can set the
following options in Settings > Notifications > Do Not Disturb:
• Automatically turn on Do Not Disturb: Set the starting and ending hours for when you don’t
want to be disturbed. iPhone turns on Do Not Disturb during these hours each day.
• Allow some phone calls during Do Not Disturb: When Do Not Disturb is on, calls are silently sent
to voice mail. To allow some callers to ring through, tap Allow Calls From. You can allow calls
from your Favorites list or other Contacts groups you define. For information about Favorites,
see Chapter 25, Contacts, on page 100.
• Allow persistant callers to ring through: Turn on Repeated Calls. If the same caller (based on
their Caller ID) calls you twice within three minutes, iPhone will ring.
Turn an app’s notifications on or off: Go to Settings > Notifications. Tap an item in the list, then
turn notifications on or off for that item. Apps that have notifications turned off appear in the Not in Notification centre

HT1212 i have no passcode option only emergncy call allow what i do ??

hy my iphone have a problem it cannot show the pass code only show the emergncy call what i can do for this ??

You're gonna have to force the phone into recovery mode:
Turn your phone off. If you cannot turn off your phone using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When your phone turns off, release the Sleep/Wake and Home buttons. Then, leave the USB cable connected to your computer, but NOT your phone, itunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.

Conference call CME 4.0

Hi guys
you know
how many consumers in conference call can participate on an only conference with cme 4.0?

Hi Marcello,
Ad Hoc Conferencing
Before Cisco Unified CME 4.1, support for conferencing is limited to three-party ad hoc conference calls using a G.711 codec. To have an ad hoc conference with a party that is not using a G.711 codec, transcoding is necessary.
In Cisco Unified CME 4.1 and later versions, multi-party ad hoc conferences allow more than three parties.
From this excellent CME doc;
Cisco Unified Communications Manager Express System Administrator Guide - Configuring Conferencing
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeconf.html#wp1010335
Hope this helps!
Rob

Conference calls all of a sudden do not work??

We have a Call Manager 5.1 with MGCP controlled gateways. Out of no where our ablility to ad hoc conference call does not work. We connect the calls and no one can hear one another. Any suggestions as to what could be the cause? Any feed back would be great.
Rgds,
Vicky

Here is the Troubleshooting and Debugging VoIP Call Basics.
http://www.cisco.com/en/US/tech/tk1077/technologies_tech_note09186a0080094045.shtml

Application to report cost of INCOMING calls

Hello everybody,
My requirement for a project is:
*"After user hangs up on a completed call, this app will put up a popup, saying your call to phone number nnnn lasted ssss seconds, and cost cccc cents.*
*Cost will be computed by multiplying call during in seconds rounded up to minutes, at 5c a minute."*
Can you please tell me what are the process/steps I need to follow in order to complete the project successfully and what are the jar files and other stuffs I need to download.
I hope I am with the right forum, and is eagerly waiting for your prestigious suggestions.
Regards,

I was told in April 2012 you can add a call barring to landline for £3.15 a month, no outgoing calls allowed but allows emergency calls.
Hope this helps

How to Allow Assignment to Multiple Suppliers?

In 11.5.9 there was a field called Allow Assignment to Multiple Suppliers on the Bank Accounts window.
Does anyone knows where this field is in R12?

Metalink note 560714.1

Calls in queue drop when first call is answered

When all agents are busy and there are multiple calls in queue, at the point a call gets routed to an agent and answered from queue, the other calls in queue hear the disconnect prompt.
This is CME 9.1 on Version 15.0(1r)M16
application
service queue flash:app-b-acd-2.1.2.3.tcl
param queue-len 30
param aa-hunt1 7426701
param queue-manager-debugs 1
param number-of-hunt-grps 1
service KCC flash:app-b-acd-aa-2.1.2.3.tcl
paramspace english index 1
param handoff-string KCC
paramspace english language en
param call-retry-timer 15
param service-name queue
param drop-through-option 1
param second-greeting-time 60
paramspace english location flash:
param drop-through-prompt _TYFC.au
param send-account true
param max-time-vm-retry 3
param voice-mail 1426900
param max-time-call-retry 1400
param aa-pilot 7427701
param number-of-hunt-grps 1
Thanks in advance.
HHe

Try this , see if that helps...
param queue-len number
Router(config-app-param)# param queue-len 15
Sets the maximum number of calls allowed in each ephone hunt group's call queue used by Cisco Unified CME B-ACD.
•number—Number of calls that can be waiting in the call queue for each ephone hunt group. The range is from 1 to 30. The default is 10.

Cannot get video calls to work on two 9971 phones.

we are using two 9971 phones, both have the cameras enabled, and the preview video button works, but we do not get video on any calls.
camera has been enabled in the Enterprise Phone parameter.
CUCM 7.1.5.1
so, we should be fine for service pack level. anyone have any ideas? both phones are set to "auto transmit" video.

Ok, now you'll need to do a few things for real-life:
Adjust the per-call bandwidth (region) and total bandwidth (location) on CUCM. The table below will help you calculate what values to plug into the fields.
Note, there are system-wide inter-region default values under Service Parameters. Set that first and then set the fewer one-offs on the regions/locations individually.
The 9900 series phones support several different video resolutions per the data sheet on Table 6.
Bandwidth consumption for each of the supported resolutions is not well documented; however, the CSF-based clients release notes actually mention it on Table 11 provide a table. Note that CSF may not support the exact same list of resolutions so use this only as a guideline.
Do not forget to update your QoS configuration. Be careful not to undersize the video queue; this traffic is bursty unlike voice.
Cisco Call Admission Control Bandwidth Values
This table identifies the appropriate bandwidth value calculations to use with CUCM or IOS. This table was originally obtained from the Cisco Live 2010 session BRKEVT-2300 presentation.
UCM Region
UCM Location
H.323 Gatekeeper
IOS MQC LLQ Class
Audio Only Call Configuration
Audio-Only CODEC
Audio Bit-Rate plus Layer 3+ Overhead
Twice the Bit-Rate
Bit-Rate plus Layer 2+ Overhead
Video Call Configuration
Audio CODEC plus Video Call BW
Video Call BW
Twice the Bit-Rate
Bit-Rate plus 20% Overhead*
Audio Call Example (G.711)
64kbps
80kbps (One Call Allowed)
128kbps
95.2kbps (on IEEE 802.3)
Video Call Example (384k)
384kbps
(64kbps for audio and 320kbps for video)
384kbps (One Call Allowed)
768kbps
460kbps
*This is a reference value for typical Cisco video endpoints such as CUVA and the 9900 series phones. Adjustment may be required for new CODECs or other models and manufacturer equipment.
Please rate helpful replies.
Message was edited by: Jonathan Schulenberg to qualify UCM Region Video Call Example

Allow indexing service to index this disk for fast file searching

Hello,
I'm using Oracle on Win 2000, I have lately found out that the option "Compress drive to save disk space"
is not supported in Oracle.
When I've opened the drive specifications on the properties dialog, I found also another option called "Allow indexing service to index this disk for fast file searching".
My question are;
1. Should I turn it off?
2. Same question when the indexed directories does not include Oracle files?
3. Same question, when the indexing service is set to off?
Thanks,
Tal Olier ([email protected])

If this is a production machine, I'd definitely turn this off. Hopefully, no one is going to be searching for particular files on a production server-- they'll know where to go. You probably don't want any unnecessary background processes using up CPU or RAM either.
If this is a development machine, the developer may be searching for files with some frequency. If that's the case, it may be worth it to keep this service enabled.
I'm not aware of any Oracle issues when this service is running, but I'm paranoid enough not to trust it on a production box. If you're running on a dev box, you shouldn't have problems, particularly if you're not indexing Oracle files.
Justin

Ad hoc Conference restrictions

I have an India CUCM Cluster that needs to have restrictions on ad hoc conference calls that are being made between three participants (1-India PSTN caller, 2-Internal India Cluster phone and 3-Internal North American Cluster). India law doesn't permit this type of a call to happen.
What is the best way to restrict the India PSTN to be connected to the North American Cluster?
Thanks,
Jim

Hi Jim,
This problem was solved by cisco back in cucm7, the docs can be found here.

How to disable "slide to call" feature for missed calls from lock screen on ios7

I realized that when the iphone (running iOS7) is locked, the“Slide to Call” allows anyone to make an outgoing call to the missed calls from a locked phone (with passcode).
it is nice feature for people who don't care about locking their phone.but I believe there should be an option to disable the “slide to call” or at least require password before allowing the outgoing call to go through.
This is a serious security issue.it should be user configurable.
Hope Apple will take it seriously and release a update for the same.

You can provide feedback to Apple here: http://www.apple.com/feedback/iphone.html

Option to disable the "slide to call" feature for missed calls from lock screen

I realized that when the iphone (running iOS5) is locked, the“Slide to Call” allows anyone to make an outgoing call to the missed calls from a locked phone (with passcode). This may allow malicious and unwanted calls to be made from a locked phone by anyone having access to the phone and defeats the purpose of having the phone locked by a passcode.
Don't get me wrong, it is nice feature for people who don't care about locking their phone, but I believe there should be an option to disable the “slide to call” or at least require password before allowing the outgoing call to go through.
At this point the only option that I see is to disable the phone related notifications from lock screen, which prevents all phone related notifications to be displayed on lock screen (missed or voicemail). This is not a desired solution.....
This is the first time in the history of iOSes, that a user can make outgoing calls from a locked phone with a passcode. Even the voice commands (for dialling a number) have option to be disabled on locked screen.
I was wondering if anybody else feels the same way about this? or have a solution?

I share the same feeling with you about this issue.
Actually I was very surprised when I discovered that!
In addition to this, when you actually slide a missed call, it calls the person and when you end the call, the notification of the missed call is still present! So that person can be called again and again and again.
This is a serious issue that Apple has overlooked!
Please secure the iOS 5.
Thanks.

GSM/GPRS gateway with Call Manager ?

Do CISCO make a GSM/GPRS gateway / interface card ?
To make sure I am using the correct terminology, I'll explain what I want to do.
I want a gateway registered with Call Manager (in the same way my e1 equipped 2821's are) but instead of using an e1, use up to 30 mobile SIMS so I can forcecalls to mobiles through this gateway and get "mobile-to-mobile" rates rather than "land-to-mobile" rates.
In order to achieve this, do I get a 3rd party box and connect this to the e1 interface of CISCO router - and this 3rd party box emulates an e1 ? meaning the use of mobile SIMs is transparent to the CISCO router (it just sees an e1). Do CISCO make/rebrand this type of device ? Is there a WIC/interface card that achieves this with a CISCO router ? Or a specific piece of CISCO equipment for this purpose ? Does anyone have any experience/recommendations ?
Just to clarrify, this is literally for voice calls only and cost savings based on "mobile-to-mobile" rates/call allowances in an active Call Manager 4 deployment, there is no data requirement. UK based.
Any help would be greatly appreciated.
Thanks.

The Cisco GPRS Gateway Support Node Service Manager (GGSN-SM) is a set of tools that interface with the CiscoWorks desktop navigation user interface to perform provisioning and troubleshooting of access point names (APNs) and Cisco GGSN charging profiles. The Cisco GGSN-SM interfaces with the CiscoWorks LAN Management Solution (LMS) to provide an end-to-end management solution for Cisco Mobile Exchange networks.
http://cisco.com/en/US/products/ps6454/index.html

Can't make a call with my 8130

I just noticed today that I can't make calls. Everytime I try to make a call it says "only emergency calls are allowed"
I can send an SMS and when I try to call my cell from another phone it goes to the msg after one ring but my BB wont ring though

Only emergency calls allowed usually indicates a telecom carrier issue. Make sure the indicator near your signal strength is in capitals letters, it should be something like GPRS, EDGE, or 1XEV. If the indicator is in lower case, it means the BB has detected the carrier, but is not being allowed into their network. The telecoms are required by law to allow 911 calls to go through, which accounts for the message you are seeing. If you are roaming, it may be that your home telecom does not have a roaming agreement with the telecom you are currently latched onto.
A couple of things to try:
-Pop the battery out for a few seconds, then put it back in. This will reset the device and all connections, forcing it to reconnect again. This will often fix errors caused by a bad tower connection.
-If you are in your home service area, try resending the registration signal using Options/Advanced Options/Host Routing Table, click for the menu and select Register Now
-If you are roaming, see if there are other carriers in the area you are in using Options/Mobile Network
If none of these work, you are probably going to have to contact your carrier.
posted by DigitalFrog
WARNING: May contain traces of nuts.

Ad -hoc On Call allowance

Similar Messages

Maybe you are looking for