Ad-hoc querry for education

hi experts,
i have an issue relating ad-hoc query.
The adhoc query for the education report is not working properly i.e. It's captures only the last record tht has been entered gets displayed.is there any way for displaying other education details.
pls. help me.
Regards
Sumeet

Also be ware if you have IT22 records with validation prior to employment.  This is often the case in our installation.  To be able to fetch these records, set the following switch in your infoset (go to "Extras" and the tab "Code"):
*$HR$ [P0022,P0023]  <<<< This needs to be in brackets.  Doesn't show here
*$HR$ TIME_DEPENDENCE = 'INDEPENDENT'
As you see here, we set the same switch for IT0023.
Hope this helps
Kirsten

Similar Messages

  • Ad Hoc Querry

    hi all,
    i was using ad hoc querry for generating some reports. but now some error is coming, and ad hoc querry is not working fine. how 2 make changes in ad hoc query, i m nt able 2 generate education and previous employee details correctly.
    kindly help.
    Regards

    Hey
    What exactly is the problem,
    Have you re-tried it once..
    Cheers
    Rafi

  • Does Adobe CC for education also allow 2 installs?

    Does Adobe CC for education also allow 2 installations? I'm asking specifically about licensning Creative Cloud for a primary school student and installing it on both a laptop and iMac.

    Yes.

  • Which is better for educational purpose ( for attending online classes ) ??

    which is better for educational purpose ( for attending online classes ) ?? iPad air 2 or d macbook pro?? what abt iPad pro ?? plz suggest one for me plz

    Some educational site are behind the times.  At times, they require software that isn't available on the ipad.  You should visit an apple store and try the educational site with the ipad.  Considering that you have an iMac, I'd lean in the direction of the iPad.
    Robert

  • Statistics indicator option in Ad hoc query for IT0033

    Hi,
    My client is trying to run the ad hoc query for IT0033 and not able to see the "Statistics indicator"  fields in the selection so is there a way to add this field to ad hoc query so it will facilitate to query on this field ? please advice.
    Thanks,
    Lisa

    Hello Lisa,
    If you need to have there the statistics indicator, you would need to create there additional fields for that, selecting from
    table T543A, with the employee molga and infotype 0033 subtype
    Best Regards,
    Deepak.

  • Tds for education cess

    HI,
    Please let me   know i maintained TDS  configuration but its wrongly calculating for   Education Cess.
    vendor invoice
    vedor cr -
    117288
    fright dr -
    120000
    tds dr2400-2%
    surcharge-dr--240-10%
    education cess-dr-723%(tds+surcharge)---correct figure is 79
    ihave maintained withholding tax rates correctly
    pls help me...
    Rehgards
    nasa

    Hi,
    Please Chcek the following Tables:-
    maintain the tables as under...(use SM30 to maintain these values) or SE11/ SE16 (also take help of the abaper) there are some related notes which you have to check and there is one note that you have to apply.
    1. If you have separate tax codes for Surcharges,
    J_1IEWT_SURC table should be maintained, by setting the checkbox checked, for the company
    code.
    Those tax codes should be available the J_1IEWTSURC table
    2. If you have a combined tax code for surcharges, then the tax rates
    should be maintained in J_1IEWT_SURC1 table.
    Make sure that tax codes available in J_1IEWT_SURC1 table are not
    available in J_1IEWTSURC table and vice-versa.
    3. If you are using separate tax codes for Education cess, those tax
    codes should be maintained in the J_1IEWTECESS table
    and 'X' should be maintained for the company code in J_1IEWT_ECFLAG table.
    4. If you are using combined tax codes for Education cess, tax rates
    should be maintained in J_1IEWT_ECESS1 table.
    Make sure that the tax codes available in J_1IEWT_ECESS1 table are maintained in J_1IEWTECESS.
    And also go step
    Spro->Refimg->Finance->Financial Global Sttigs>Withholding Tax ->Extended Withholding TAx->Calculation--->Define WIthholding TAx codes in that for ECess in % feild give as 2.2 % and for secess tax code give % as 1.1% and after that.save and come back.
    Next in WIthholding tax base amount--->Protray Dependencies ---> give the depency reference as the no which u wll find for the base tax code.
    Regards,
    Raghavendra.M
    SAP-Practice

  • I am looking for educational posters from Apple or for Garageband, if they exist. I'll be teaching a new class for middle school using Garageband next year. Thanks!

    I am looking for educational posters from Apple or for Garageband, if they exist. My school district will be teaching a new class for middle school using Garageband next year. I'd love to make the rooms look awesome! Can anyone hook me up? Thanks!

    lucky14life wrote:
    first i was wondering what everyone thinks about macbooks compared to let's say another pc like hp,dell,etc.... i have been told that i'd have to be dumb to get a machine with windows vista on it,so that is why i have turned my focus to a macbook because i have heard they are pretty good and worth it...
    I personally like my MacBook better than any other computer I have ever owned. I like being able to use windows when I need to but not being tied to it. My wife bought an HP with Vista and it doesn't seem to bad. Lots of updates at least one a week. Mostly graphic card drivers update.
    also is it true that if you upgrade let's say the memory,hard drive,etc it won't be covered in the warranty/apple care plan??
    Only two things you can upgrade on a MacBook is the Hard drive and Memory. It will not void the warranty. This is apples word on it. DIY Warranty Info
    I would just like to ask for people's opinions please on purchasing one of these i am currently a senior in college and will be using it next year for grad school,need to replace the one i currently have...
    Be sure you can live with the graphics. If you do a lot of graphics work you might want to consider the MacBook Pro. I use my MacBook for video editing using Final Cut Express HD and it works well. The MB is also not very good for gaming if you are into that. The integrated chip set doesn't work well with 3D games.
    also any other ideas on getting iwork or office, a hard plastic case or a skin,thanks alot for anyone's input it is greatly appreciated.... i am looking to get one once leopard comes out thanks!!
    Depending on your school may be a factor in what you choose. I use iWork and it is pretty good. You could also try NeoOffice or Open Office. They are good also. Office is supposed to be coming out with a new Mac version but not sure yet how it will work.
    Be sure to ask for the student discount when you purchase the computer and software. It adds up.

  • Can I use Oracle Express Edition for Educational purposes?

    Dears,
    I have an Information Technology school and I'm wondering if I can use Oracle Express Edition for Educational purposes. Do I need any special licenses for this?
    I noticed the following statement on Oracle 11g Express download (Oracle Database Express Edition 11g Release 2) but would like to confirm if I have any restrictions about that.
    "Oracle Database XE is a great starter database for:
    Educational institutions and students who need a free database for their curriculum
    Thanks
    Martins

    Hi Darsh,
    I can't say that this was a good answer, but I addressed a similar question in this forum posting:  https://forums.oracle.com/thread/2600958
    Joel

  • FieldPoint devices and LabVIEW program for educational project

    I use LabVIEW 7.1 and NI FieldPoint devices (FP-1000) for educational
    purposes. I want to control a automation unit which has got 6 digital
    input(DI) and 5 digital output(DO). I used the sequence structure, but
    actually I am not sure the solution whether true or not.
    Working principle of my system:
    If "Channel 1" DI is ON, DO Channel 10 must be "ON"(turn table motor
    Start)
    If Channel 2 DI is ON, DO Channel 10 must be "OFF"(turn table motor
    Stop) and DO Channel 11 must be "ON" (drill motor Start) and after a
    delay time DO Channel 12 will ON (drill motor down)
    If Channel 3 DI is ON, DO Channel 12 will OFF, a bit of delay time DO
    Channel 13 ON ( drill motor up)
    If Channel 4 DI is ON, DO Channel 13 and Channel 11 will be OFF (drill
    motor stop) and then DO Channel 10 must be activated.(turn table again
    Start)
    If Channel 2 is ON again DO Channel 10 will OFF and check cyclindir
    control Channel 14 will ON, after a delay Channel 14 will OFF
    If Channel 5 DI is ON, DO Channel 10 will ON again while DI Channel 2
    is ON.
    How can I project the system with LabVIEW 7.1?
    Thanks, stn

    This is a pneumatic technical experiment set. Your suggestions okey
    but I have already studied these subjects.I have tested a solution for
    the system using the sequence structues in the LabVIEW. But if you
    sent to me an example vi, I will understand the solution way.Thanks.
    Working principle of my system as a summary:
    Step 1: When DI 1 is ON, DO 1 must be "ON"(turn table motor
    Start) while DI 2 is ON. In this case DO 2 must be "ON" (drill motor
    Start) and after a bit
    time delay DO 3 will ON (drill motor down),
    Step 2 : when DI 3 is ON,(drill bottom level), DO 3 will OFF, after
    that DO 4 will ON ( drill motor upper position) in this case DI 4 is
    ON, after that DO 1 again ON while DI 2 is ON (like step 1)
    On 27 Ocak, 21:40, tst <[email protected]> wrote:
    > Your description is not particularly clear.
    > For example, what happens if DI 1 and 2 are True at the same time? Is DO 10 T or F?What's the difference between the DI 2 at the beginning and at the end? And so on...
    > As a&nbsp;start,&nbsp;I suggest you try searching this site and google for LabVIEW tutorials. <a href="http://cnx.rice.edu/content/col10241/latest/" target="_blank">Here</a>, <a href="http://zone.ni.com/devzone/learningcenter.nsf/03f7c60f17aad210862567a..." target="_blank">here</a>, <a href="http://www.mech.uwa.edu.au/jpt/tutorial/index.html" target="_blank">here</a>, <a href="http://www.iit.edu/~labview/Dummies.html" target="_blank">here</a> and <a href="http://www.upscale.utoronto.ca/GeneralInterest/LabView.html" target="_blank">here</a> are a few you can start with and <a href="http://www.fafiles.com/" target="_blank">here</a> are some tutorial videos. You can also contact your local NI office and join one of their courses. In addition, I suggest you read <a href="http://zone.ni.com/devzone/conceptd.nsf/webmain/CB5E46406090C61C86256..." target="_blank">the LabVIEW style guide</a> and the LabVIEW user manual (Help&gt;&gt;Search the LabVIEW Bookshelf).
    > To get more details about might be relevant for this case, try searching for "state machine" and look at the examples in the File&gt;&gt;New dialog.

  • Shop for education

    I noticed on the Apple website that if you're currently enrolled in college you can "shop for education" and get products for a cheaper price. Does this also take place if you visit an apple store? Or is it strictly an online offer?

    You can get the discount in an Apple Store as well as long as you have a valid student ID.
    Cheers,
    GB

  • Mac for Education

    Can i buy a mac in USA with the discount(mac for education) with a acceptance cirtificate from a university in south africa?
    This will realy help me because there is a $500 dollar difirance between the us and south african price

    no, an acceptance certificate does not confirm that you are enrolled, it is just confirmation that you have been admitted to a university.  You can have a letter and never actually enroll.

  • Looking for education materials of developing C++ application with Eclipse

    Hello everyone,
    I am looking for education materials of developing C++ application with Eclipse. Could anyone recommend some good education materials?
    Thanks in advance,
    George

    Thanks nereidahoxhaj,
    So this is funny...
    Hi George,
    i see from your history that you have never ever
    tried to help anybody... anyway i'll answer just to
    show you that the people in this forum are different!
    Download CTD plugin form eclipse site:
    http://www.eclipse.org/cdt/
    and then go to another forum...
    Addio!Your reply is very helpful. You are really different.
    regards,
    George

  • Looking for Education Related Sample Pages

    I am looking for "Education" related sample pages or sites to
    use for our districts. The current sample pages in Dreamweaver 8
    only have business related pages.
    Mr. Tony Amsler
    Monticello Community Schools
    850 East Oak St
    Monticello, Iowa 52310
    Email: [email protected]

    A quick Google search will give you one and a quarter billion
    "school" pages
    to inspire you.
    "TonyAmsler" <[email protected]> wrote in
    message
    news:frs0on$e9u$[email protected]..
    >I am looking for "Education" related sample pages or
    sites to use for our
    > districts. The current sample pages in Dreamweaver 8
    only have business
    > related pages.
    >
    > Mr. Tony Amsler
    > Monticello Community Schools
    > 850 East Oak St
    > Monticello, Iowa 52310
    > Email: [email protected]
    >

  • Multi Folio App for Educative Institution

    Hello,
    We are an educative institution and have an internal magazine which we view in iPad with Adobe Content Viewer.
    Now we want to publish to App store and we already have the Apple Dev Account, and all Certificates and Assets ready too.
    My question is: ¿What is the simplest, and, well, cheapest way to publish our multi folio app?
    I see that with a Creative Cloud Account you get the DPS but only single edition. Do we have to purchase the DPS Pro Edition in order to publish Multi Folio App or is there another way?
    We also have the CS5.5 license for education. Are there any special offers for Educative Intitutions?
    Thank you so much
    Eduardo Flores

    You can purchase DPS Professional Account either Monthly or Annual to create Multi Issue Apps. I do not think that there are any offers for DPS Pro edition.

  • Querry for Production receipe

    I am new to this forum
    From C203 : We get Receipe Details of 1 singel Material and Plant
    I want to know the Operations with lead times for List of materials
    For this purpose i have creaed a SAP querry using below tables
    MKAL : Production Version of Materialas
    MAPL :Assignment of Material to Task List -
    >Linked through material number
    PKLO: Task list header --->Link is Key for task list group
    PLPO Task list operations---> Link is key for task list group
    The problem is of Valid list of operations as on Date
    C203 displays only valid list of sequence but this querry shows multiple sequence of operations as stored in PLPO
    I want to restrict the querry(For multipler items) exactly to same as C203 display.
    T-code C203 has 3 seleiction fields , Material , Plant and Key date(Validity)
    However the Key date is not stored in any table
    I have also checked the tables about Valid From, Valid to , change date etc there is no difference is sequence of operations
    How can i restrict the entry to exactly the same as of c203

    Hi there,
    technically You miss one table: PLAS (...PLKO - PLAS  PLPO)
    I am not sure of what You said: do You have the same operation from PLPO multiplied (missing table could cause multiplication), or You have the one, which could be seen in C203 and some more? In this case  have You checked if those ones are deleted ones? The operation deletion could be also found in PLAS-LOEKZ.
    Br

Maybe you are looking for