Ad-Hoc Query (Personal Data Infotype)

Hi,
Our employees are able to update/correct any personal details (name changes, addresses, NI number etc) using ESS.These changes are reflected in the personal data infotype. I would like ot run an ad-hoc query to pick up any personal changes that employees make.
How do I do this?
Thanks

You can do this by checking the AEDTM field of the infotypes.
Regards,
Amit

Similar Messages

  • Change Time Constraint for Personal Data InfoType

    Hi,
    How to change the Time Constraint for Personal Data InfoType.
    I tried to do it in Customisation Procedure --> Infotypes, but the option to change Time Constraint is disabled for Infotype 0002.
    Thanks

    Hi,
    you can change time constraints in general attributes of infotype attributes,this can be done through table maintenace view V_T582A.
    But note that we cannot change the time contraints for mandatory infotyepe of personnel in an organization i.e -0000,0001,0002.
    ex:- without personal details like names no personnel will exist in an organization.
    regards,
    Soori

  • PC 10.0 - Error in Ad-Hoc query in Data Source

    Hi,
    We are facing an error when running an Ad Hoc query in the Data Source. We have built a DS to monitor the job log table TBTCO and was running the query to check if data is getting fetched correctly. But the query does not return any data and shows the message "Table does not contain visible columns". Is this an issue with the configuration of the SAP table or is the error on the PC side?
    Thanks,
    Soumya

    Hi Naveen,
    The connectors are setup and we are able to monitor other tables but not this particular table TBTCO.
    We have already added the table and the required fields into the Data Source. We are getting this error when running the query after that.
    Is this because of the Delivery Class L of the table TBTCO?
    Thanks,
    Soumya

  • Start date personnel number infotype 0002 (Personal data)

    Hi gurus,
    I have the following problem in SAP ECC6.
    I created a personnel number with transaction PA40 with start date 200208.
    In infotype 0002 (Personal data), after that I have filled various field, if I save, the start date changes from 200208 to 01011900.
    Could you help me please?
    Thanks in advance
    Regards
    Raffaele

    Hi
    Adding to what Mr. Sai Naraynan has said.
    See whatever happening at your end is absolutley correct you have to understand the logic behind that.
    See Personal data infotype will contain the master data of an employee like name, ***, complete name, form of address etc... whuich is same from his birth so there is no need to have a validity starting from the date of hiring because this data is same from his birth thats why system automatically stamps a Birth date out there.
    Hope it clarifies your doubt.
    Regards,
    Bhupesh Wankar

  • How to add an Infotype to an exsting Infoset (ad hoc query)

    Hi,
    How to add an Infotype (Ex. 0025) to an exsting Infoset (ad hoc query)?
    I was trying by clicking on 'Extras' tab & create...I get three options, create field, create table or create structure.
    I am not sure which to use or is there any other way? Pls. let me know the steps...
    Also what is this 'Package', which is aked whenever you create or change an Infoset.
    Pls. suggest.
    Tnx
    SKR

    I was able to add the infotype by adding the table as PA0025 & include all the fields in the field group.
    When I check, I get the following error:
    "Access to PA0025 with sequence no. 01"
    Message Text
       Access to PA0025 with sequence number 01
    Technical data
    Message type__________ W (Warning)
    Message class_________ AQ (Message texts for SAP Query)
    Message number________ 006
    Message variable 1____    Access to PA0025 with sequence number 01
    Message variable 2____ 
    Message variable 3____ 
    Message variable 4____ 
    Message attributes
    Level of detail_______ 4 (Level of detail 4)
    Problem class_________ 3 (medium)
    Sort criterion________ 
    Number________________ 1
    Do we need to input the sequence no. as 00? or is their anything else that I have to maintain?
    Tnx
    SKR

  • Ad Hoc Query - While executing - System could not read any data

    Hello Techies,
    When I am excuting my Ad hoc query - for one personnel number for which Infotype 28 subtype 0001 has been maintained
    But system is throwing this error -
    System could not read any data
    Message no. AQ_AD_HOC226
    Diagnosis
    There is no data available for the specified selections.
    System response
    The results list in the lower part of the screen still displays the last list to be created.
    Please let me know why does it happening ?
    Thanks
    Jaydeep

    It was an date selection issue - as while executing the Ad hoc query - the reporting date is today -
    changed to all

  • Ad Hoc Query Data Issue for Position Based Infoset

    Experts,
    I've created an infoset that is based on the S object using the PCH database.  For this infoset, I've included several infotypes with focus on 1000, 1001, and 1028.  I've included the Address infotype (1028) as this is where we store our work location information.  For some reason though when I attempt to pull information from 1028, specifically the House Number and Street field, the Postal Code field, and the City field.
    For some reason though, no data is being returned in those fields.  I've verified for the position (in PP01) that I'm querying on that the data is maintained in 1028, and I've verified that I'm attempting to report on the correct fields by verifying the field technical names I'm pulling in the Ad Hoc Query with those I know have data stored in them on the infotype for the specific position.
    Would anyone have any guidance on what could be happening here or what I might need to adjust to be able to pull this data?
    Thanks in advance for your time and help.
    Best Regards,
    Joe

    To add some further clarity to this item, the Address infotype on the Position (S) object is pulling from a dropdown of selectable Buildings.  If unfamiliar, the Building drop is populated by configuration data from the IMG.  The fields that are populated then in the Address infotype actually come then from the Building entries and are simply populated onto IT1028 (address) depending on which Building is selected.
    I think this is what it occuring then when I select the fields from the Address infotype and I see nothing populated in the Ad Hoc query since the field information is not actually stored in IT1028 but on in the Building entry.
    Has anyone else experiencing this particular problem?  If so, have you found a solution?
    Regards,
    Joe

  • Incorrect leaving date in ad hoc query

    Hi all
    Well I am running an ad hoc query for the numbers of leavers from the company and the reasons for it. This is working absolutely fine but its not showing the correct date of leaving for the employees. even if i have changed the period from 01.01.2007 to 04.07.2007, it still picks up the data for all the employees who have left the company before this period like for the years 2002, 2003, 2004, 2005, 2006.
    I need urgent help/advice on it.
    Please help me out urgently.
    Thanks and Regards.

    Hi Suresh..
    Thanks for the prompt reply. I have infotypes 0001, 0002, 0006. I also agree to the fact that infotypes like 0001 stay valid even after the employee has left the organization, but Suresh the problem is that it should not be picked up these in the report when it is run for the period from 01.01.2007 to 04.07.2007. this is what is happening in this scenario. the report is picking up the data which is a lot older than this. Is there any way to fix this problem??
    Thanks and Regards

  • Ad-Hoc Query reporting off of Payroll Results Infotypes

    Dear Experts,
    Has anyone used the Payroll Results Infotypes (IT0448 - IT0464) to create Payroll Results reports using Ad-hoc query? I would appreciate it if someone could enlighten me as to how to get the Cluster Data into these Infotypes.
    Cheers,
    Venkata

    I tried this option but was able to succed so
    Fetched the data through the use of the functional module and desigend the code as per the client requirment
    Pasteing the code
    DATA: payroll TYPE pay99_result.
    DATA : BEGIN OF itab OCCURS 0,
          srno TYPE sy-tabix,
           pernr TYPE pa0001-pernr,
           ename TYPE pa0001-ename,
           location TYPE pa0001-zz_loca,
           dept TYPE pa0001-zz_dept,
           hq TYPE pa0001-zz_hq,
           desig TYPE hrp1000-stext,
           pay_day TYPE pc207-anzhl,
           basic TYPE p0008-bet01,
           con TYPE p0008-bet01,
           hra TYPE p0008-bet01,
           hra_o TYPE p0008-bet01,
           trans TYPE p0008-bet01,
           we TYPE p0008-bet01,
           oth TYPE p0008-bet01,
           tal TYPE p0008-bet01,
           a_loan TYPE p0008-bet01,
           h_loan TYPE p0008-bet01,
           p_loan TYPE p0008-bet01,
           total TYPE p0008-bet01,
           t_ded TYPE p0008-bet01,
           net_sal TYPE p0008-bet01,
           END OF itab,
           ipa0001 TYPE STANDARD TABLE OF pa0001 WITH HEADER LINE .
    the help of technical consultant is needed
    Edited by: Sikindar on Oct 27, 2009 7:46 AM

  • Access data on multi-logical database with ad hoc query

    Dear all,
    I would like to know if it is possible to access data in multi-logical database with ad hoc query.
    I recall that I read some document stated that you can access data in multi-logical database with PNP as base.
    But I find no document about how to set it up, any comment?
    Regards
    Bill

    Hi Bill...
    PNP can be accessible..............
    PNP  0000-0999, 2000 to 2999 HR Master Data & Time 
    PCH.... I don't think so....
    Experts please do reply on this please...................
    Vijay
    Edited by: Vijay Shankar on Sep 13, 2011 11:32 AM

  • IDOC HRMD_A for Infotype 0002 (Personal Data)

    Hello,
    I'm trying to send the modifications that I make in a person in the transaction PA30 in the table PA0002 automaticly. But when I go to thew program "RBDMIDOC" and select the message type "HRMD_A" (HR: Plan data and HR master data) it says that it doesn't have anything to send. But when I modify a Object (o, c, s), and I execute the program it send information. The object(o,c,s) has sent correctly. But when I want to send the Personal Data (P), it doesn't send anything. I have the trigger activated.
    Have I selected the message type correctly?
    PM

    updating id for malasian employee is not working.
    Q0002-perid. it come only for malasian employee.
    screen no 2044
    Use transaction PA30,
    Enter infotype number 2 or select Personal Data (0002) on the Personal Data tab
    You can use any Malaysian employee #
    Click on change button
    Enter in an ID number.  (There is no validation on ID number field.)
    Click either the enter or save button.  The ID number disappears and a message says ‘No change found’.

  • Employee Entry Date in ad-hoc query

    I have maintained dates in IT0041 - datetype 01, IT 0016 KONDT and also IT0000 has Hiring date with Emp Status 3 active. 
    The entry feature is also active. When i test the Function module, it brings the correct date.
    However, when i run ad hoc query the output does not bring Entry Date . The values output for all employees is 00.00.0000.  Can someone please guide how to resolve this error.
    Thanks in advance
    JG

    Hey,
    Check this Entry date not proper in adhoc query
    Hope its helpful.
    Regards,
    Manoj.

  • Extract CRM Master Data - Ad Hoc Query

    Hi,
    Does anyone know of a tool in CRM like Ad Hoc Query in HR?
    Basically I'm looking for an end user tool that allows the user to pull of Master Data. Effectively like a report but they can pick and choose the data they want it to search on.
    Any help with this would be greatly appreciated.
    <b>Points awarded for helpful responses.</b>
    Regards,
       Philip Johannesen

    Hello,
    query /SAPQUERY/HR_ADM belongs to the client independant (global area) more info you can find here: http://help.sap.com/saphelp_erp2005vp/helpdata/en/d2/cb3f6f455611d189710000e8322d00/content.htm
    I think your copy of the infoset will also belong to the global area.
    Koen

  • EHP5 ESS - Add Additional fields from custom infotype on Personal Data

    Hi Gurus
    I am able to launch the Personal Information screen under Personal Profile
    I will need to add more fields on the Personal Profile --> Personal Data section
    I have added the infotype in V_T7XSSPERSUBTY
    I am not sure if I will need to do some configuration GenIL Model Editor
    Is BADI (Enh. Imp) HRESS_PER_CONFIG_KEY relevant to adding fields to the screen?
    Please guide how to go about doing this
    Thanks in advance

    for adding a infotype and fields you need to do this
    1. Customizing the Fields in Overview Screens
    http://help.sap.com/erp2005_ehp_05/helpdata/en/77/804c18e1844944b7f8baf5
    3159be78/content.htm
    2. Configuration of Personal Profile Services
    http://help.sap.com/erp2005_ehp_05/helpdata/en/3a/fe6eac579d4a9ead651d77
    9a2dbd23/content.htm
    3. Personal Profile application Documentation
    http://help.sap.com/erp2005_ehp_05/helpdata/en/14/60cd56b1514ae5aa811d2a
    a4a59de3/content.htm
    In EhP5 ESS Personal Profile application, in order to change the
    Address overview page fields, you need to adapt the Address component
    configuration HRESS_CC_PER_OVR_ADDRESS_XX.
    Note: In EhP5, ESS screens are based on Floor Plan Manager for
    WebDynpro ABAP Generic UI Building Block concept. To configure
    overview page fields we no longer use 'Determine Fields for Business
    Card on Area Page' View instead of that we adapt the FPM configurations.
    In the standard delivery in the Overview Page, always international
    Address is displayed and in the edit screen based on the country
    selection (Foreign Address scenario), corresponding country screens
    are displayed.
    Note: We always show international address screen in overview page in
    order to support Foreign Address scenario.
    If you want to chanage the fields in the Address overview page fields
    then adapt the Address component configuration.

  • Object selection on Ad-Hoc Query

    One of our users has created an infoset based on LDB PCE and selecting PA and PD objects. If this is ran through Ad-hoc query there is the option to restrict selections using "persons along the org structure" which gives the tree repreesentation that the user can then  easily expand and click through.
    If the user runs the infoset through SAP query this function does not seem to be available.
    Can anyone advise if/how to enable this selectin  of org structure positions through the tree structure in SAP query?
    If not, does anyone know if there is a specific reason it's not possible?
    Thanks
    Phil

    Martin,
    In SAP HR we have 3 Logical Data Base which we can use to get the information output as report
    1 . PNP/PNPCE - This database contains PA,TIME,and PAYROLL infotype & Tables (0000 - 0999 & 2000 - 2999)
    2. PCH - this database contains PD infotype and tables (1000  for OM and 5000 for TEM)
    3. PAP - This database contains recruitment infotype and tables (0001,0002, 4000 - 4999)
    When we want to create a query we have to choose from one Logical database only ... if u want the output from different Logical database the it will be development program/report which is done by the Help of technical consulant (ABAP)
    Hope this gives you the general information on ADHOC Query
    In your question you trying to get output from PA and PD both has different database of each
    so the output which you are expecting will not reflect
    even if you create infoset .... the out put shows the values/information of the specified Logical database only rest of the fields will mark as blank in the report.
    Conclution
    if  you want to create reports for Bussiness events, qualifications, Positions all are different objects so you need to create different infoset
    Hope you get some idea
    Thanks and Regards
    Rajeshk

Maybe you are looking for