Ad-link cable for Sound Blaster X-Fi XtremeMusic and Sound Blaster X-Fi I/O Consol

I have both, new pc came with sound card and bought console over ebay which came without cable to connect the two. Can anyone help to locate the missing ad link cable? Have spoken to Creative tech support and they say they don't stock any. Maybe someone has one lying around?!?! Have an audigy zs platinum pro fully funtional with hub to swap or sell.
thanks,
Ilka

On the control pod for the speakers, just press the input button until it reads "Direct" on the display. then the same goes for the effect button, press it until the effect is "Direct" from there you can run the Creative diagnostics and do the speaker test so you can make sure you have them pluged in correctly. then mess with the effects however you like

Similar Messages

  • Need the AD Link cable for SB X-Fi and other models. Anyone have an unneeded one?

    Need the AD Link cable for SB X-Fi and other models. Creative is out of stock & discontinued. Anyone have an unneeded one? TIA.

    This will do it perfectly. http://www.cableyourworld.com/prodde...?prod=CYW-1755
    I once swapped such a cable with the one supplied by Creative because I needed a few extra inches of length. Therefore my recommendation is no gamble, it is a certainty. The only reason I would anticipate failure is if the PIN 1 matching is not performed on both the sound card and I/O bay. I have also seen people turn the cable upside down as well.

  • What cables do I need to connect my 2013 macbook pro to my HD tv? I know I need mini display to HDMI, but male? female HDMI??? and also, do I need a separate cable for sound?

    what cables do I need to connect my 2013 macbook pro to my HD tv? I know I need mini display to HDMI, but male? female HDMI??? and also, do I need a separate cable for sound?

    Actually you need a Thunderbolt to HDMI adapter. It will carry both audio and video.
    This one will work: Mini DisplayPort | Thunderbolt® to HDMI® Adapter w/ Audio Support

  • Aud_ext cable for sound blaster li

    I'm trying to find the flat aud_ext cable that connect sound blaster li've! to IR dri've, the one that looks like an IDE cable but broken into 2 to buy but no where seems to sell them, not even creative shop, not even Ebay it seems, does anyone know where I can buy them from?

    shaman_nsd wrote:
    I'm trying to find the flat aud_ext cable that connect sound blaster li've! to IR dri've, the one that looks like an IDE cable but broken into 2 to buy but no where seems to sell them, not even creative shop, not even Ebay it seems, does anyone know where I can buy them from?
    Just get an IDE cable but make sure that the alignment between the pins and correct. Pin to Pin, etc.....

  • I have a macbook pro, a mini display port to hdmi cable to hook up to my tv (a toshiba 1080p flatscreen).  what do I do to actually get the image on the tv screen?  Do I need another cable for sound?

    I am trying to watch a tv show that I purchased into I-tunes.  I have the cable and it hooks to the TV okay.  The TV shows the regular apple screen that looks like the universe screen - like when it boots up or is doing an upgrade on the OS.  I can't get the image to go from the laptop to the TV.  I tried under displays and it shows the TV as a display but I can't get the image on the TV.......Please help.

    Rwogera wrote:
    I couldn't transmit sound either, do i need another cable like Kim said? i mean it cant be transmitted through this HDMI port? as for me i have one of the latest mac pro with intel core i5..tnx
    I need to know which MacBook Pro you have.  Only mid-2010  and later MBP's transmit sound through MiniDisplay Port to HDMI.  I have no information about the Mac Pro, so you might want to go to that Forum and ask there.

  • DDK Links dead for PCI-6133/6143 / Searching docs and examples

    Hello,
    On the following page
    http://digital.ni.com/express.nsf/bycode/exyv4w?opendocument&lang=en&node=seminar_US
    the links for the RLP examples and documentation of the 6133/6143 PCI-Card seem to be dead.
    Can anybody post these please?
    Thanks,
    Thomas Fleischmann

    Thanks.  The links are good now. 
    -Alan A.

  • No sound from the TV when using HDMI cable, No sound from the TV when using HDMI cable

    I recently purchased HDMI cable and adaptor, so that I can play downloads from my Macbook Air on my TV. There is only sound from the Macbook, not the TV - Do I need as separate cable for sound?

    I've got the same issue: when I connect my Macbook Air (2011) to TV via HDMI cable there's no sound through the TV system, only from the Macbook Air. I used to use my older Macbook Pro with the same HDMI adapter and it worked just fine, but not with the Macbook Air it doesn't.
    My software is up to date. I tried to select the TV as an output option in sound preferences, but it doesn't yield any results.
    Rebooding multiple times doesn't help either.
    Any suggestions on how to tackle this problem?
    Thanks in advance.

  • Monster iTV Link Cable

    hey there all,
    just been reading some posts & thought i'd pass this along. i've been using a Monster Cable to connect my MacBook to my Olevia 26" 16:9 LCD HD monitor/TV. it's the iTV Link cable for the old 12" PowerBook, which also had video out over a mini-DVI connector. the cable is 10 feet long, has a mini-DVI + 1/8" stereo plug on the Mac end & an S-Video + 2 RCA plugs on the TV end. i've set my MacBook for extended desktop & use the external monitor w/ Final Cut Express to display the Canvas. i know it's not the greatest for "real serious work" but to be able to be in bed & work on a project from an external FW hard drive as opposed to going downstairs & firing up the "Big Mac" it's pretty cool, also for watching a DVD on the bigger screen. & once i set the extended desktop it's easier to work in FCE as opposed to sending signal over firewire to my cam/deck then to a TV, because the MacBook sees the TV as 2nd computer display(it shows the desktop wallpaper). the TV is set as follows: resolution 1024 x 768 @ 60 Hz(NTSC), millions of colors. the TV is also set @ fullscreen from it's menu. the MacBook is set @ max native resolution 1280 x 800, millions of colors.
    i got 2 cables from CompUSA($15.00/ea.) less than 1/2 the original list price. probably because there are no more 12" P'Books & they think they have no market for them & want to get 'em out of inventory. iTV Link cable might also work for MacBook presentations using a Projector.
    hope this helps someone.
    DP 2.0 G5 w/ 2.5 GB RAM, 20" Cinema Display, 23" Philips HDTV   Mac OS X (10.4.8)   17" FP iMac G4 w/ 512 MB RAM, MacBookC2D w/ 1GB RAM

    iPod AV Cable M9765G/A

  • AD_Link-cable for SB Audigy 2 Pro Plati

    Hi,
    I need a new Ad-Link-cable for my soundcard.
    Are there any german dealers who would sell this cable?
    Thanks!
    cpu

    cpu,
    It would be best to contact our Customer Support directly, to see if they can supply you with this cable. It's very unlikely any stores would get them in especially.
    Cat

  • Manual for Sound Blaster Live! CT4670 needed

    I'm looking for the manual of the Sound Blaster Li've! CT4670 card in English or German. Somebody has got this manual in PDF format or knows a source where I can download it's

    0Re: Manual for Sound Blaster Li've! CT4670 needed" CT4670 = SB Li've Value according to here,
    ?http://support.creative.com/kb/ShowA...=ws:,case=0846
    so using that here is a link to the manual,
    http://support.creative.com/manuals/download.aspx?nDownloadId=2386&prodName=Sound%20Bl aster%20SBLi've!%20Value%20User%20Manual

  • Finding the ASIO driver for Sound Blaster ZS

    Finding the ASIO driver for Sound Blaster ZS
    And One More question
    Anybody are using the Guitar Rig (Guitar effect software)
    How to detect the Sound Blaster ZS sound card with WDM Driver

    shlomokg wrote:
    Hello,
    I am trying to use my Sound Blaster LX with the new Adobe Audition 2.0 with no luck.
    With the new version 2.0, Audition came with this ASIO solution that should make things easier.
    Somehow for me it does not work.
    Please advise, what should I do that Audition will work with my sound card?
    Thanks,
    Shlomo
    Perhaps Asio4All or USB-ASIO (LX not said to be supported) driver is needed to be installed to get a sort of ASIO support for that USB device.
    jutapaMessage Edited by jutapa on 07-2-2006 07: PM

  • HT1551 Do you have to have a certain Hdmi cable for sky go to stream picture not just sound?

    Do you have to have a certain Hdmi cable for sky go to stream picture not just sound?

    hdmi is a std which always stream both picture and audio
    but when you say sky then connecting the atv to a middle box hdmi switch is a hit or miss if it can be don
    really comes down to the switch in this case the sky one

  • Windows Vista Driver for Sound Blaster 5.1 P

    I want driver for Windows Vista 32 Bit edition for Sound Blaster 5. PCI sound card. I have loaded the Windows XP driver but as a result of that it is playing audio in 2 speaker stereo mode, but i have creative 5. speaker system. As a result of that sound is coming almost only from the front two speakers. Creative MIXER is also not working. Please suggest a solution.

    Hi daniel_k , the driver works fine but there's a little problem : when i reboot , the startup process stops at about 50 percent (stops responding)?, when i launched the startup repair utility which takes about 0 mins to complete , then the pc boots normally?. When i look in device manager , it says my sound card?has no driver installed?but when reinstalling your driver it's ok again ! The main problem is when i restart ! Please note that i reinstalled windows 7 and performed a clean install of the driver as you requested before this problem arises . Please?can you fix the driver or give another one . Thanks .

  • Software Installation for Sound Blaster X-Fi Notebook

    5Software Installation for Sound Blaster X-Fi Notebook[ Hello, I have searched through the sound blaster forum for an answer to my question, but have been unable to find it.
    I recently recieved a sound blaster x-fi notebook. When I inserted the unit into my computer, the drivers installed just fine and I am able to use it, however, when I try to install the software bundled with the product on disk, something goes wrong. To be honest, I have no idea what it is. The problem seems to be with the install wizard itself on the disk provided me, because the install progress gets to about 20% and freezes while installing the Creative Console Launcher. I'm not sure if I just need a new CD, or if it is a problem with the software itself and nothing can be done.
    If anybody can provide some insight as to what the problem is or how I can fix it, I would be very appreciati've.

    Hi,
    Glad that it work for you. I think someone is asking for feedback in that driver download thread. Maybe you can post your feedback there on how is it for your x-Fi Notebook with the new driver set. I believe there are others who would be like you and would certainly love to hear any good news. Everyone has always been posting on what's bad and what's not working, but i think we should also post to tell what's good and what's working.

  • DO NOT install this driver for Sound Blaster Audigy SE, or Sound Blaster Audigy Va

    I have two creative products that work fine under xp. But since installing vista my sBli've platinum doesn't work at all, i find out that creative are no longer supporting this card for vista. Fair enough... So I'm waiting for the SB audigy driver update and behold I read that i shouln't install the driver for my other Sound Blaster card, Audigy SE.
    what are creative trying to do? does'nt look like a well run company.
    And from what I've read what is the point of getting a card that is suppoted by the new driver as other people seem to be complaining that this new driver doesn't enable all the features as under Xp.

    If I am right your Audigy is the first Audigy (EMU0k2) soundcard that was launched by Creative Labs. You need the drivers for the audigy series. For driver/application updates: Latest downloads Audigy Platinum
    For a proper install, you may use the tools Driver Cleaner or Driver Sweeper in Windows Safe Mode to clean up the older drivers that are left in the system which can cause the problems you are having now; you can find these tools at Guru3D (under 'General Utilities').
    After that You can install the drivers including the software/applications by using the install cd which is supplied with your Audigy soundcard, and then install the driver updates manually afterwards.
    Or you can try out the new Daniel_K's driverpack (software/applications included, install cd not needed): SB Audigy Support Pack 2.8.000EQ (08/22/2008)
    Good luck!
    Message Edited by CTman on 09-23-2008 05:38 PM

Maybe you are looking for

  • Windows Update Crashing my Tablet

    I have a Samsung Ativ that I have had problems with since I got it.  I get the "KMODE_EXCEPTION_NOT_HANDLED " error when I update the tablet.  I was able to get it into Windows 8.1 but I can't plug it in and run windows without the error.  I am on my

  • Archived BP visible in Segment builder

    Hi, Even after a BP is archived it is visible in Segment Builder(target group). I also tried checking 'Central Block' in Status tab. This too didnt solve the issue. Is there anything I can do so that archived BP will not appear in Segment Builder. Th

  • Groups possible for many managed servers?

    Hi, we have to manage 30+ servers in 6 different locations. In Microsoft Remote Desktop for Mac V 8.0.15 there is only one main group called "My Desktops" and all servers are listed in this group. I don't see a function to add more groups to have a o

  • Can I have Recovery and HP Tools in the same partition?

    My HP originally came with 4 partitions. However, I needed one parition to install Ubuntu. Therefore I deleted the HP Tools partition since I backed up the HP Tools files and knew I could get another copy from HP. However, I would like to know if it

  • Does iPad3 have a magnetic on/off switch?

    I have a Targus cover with magnetic on/off but won't work with iPad 3. It will work with iPad 2.  Noticed iPad 3 doesn't have magnetic switch option in setting like iPad 2.  What am I missing here?