AD Link Problem with ACS 5.2

Hello at all,
we have a Problem with a ACS 5.2. We have installed the Software on a VMware. The Machine ist running without Problems.
Now i would like connect to our AD. The connection is o.k but i can not see any Groups when i make a search.
I get a failure Message in the CLI:
*** glibc detected *** corrupted double-linked list: 0x43b77858 ***
Did anyone know this Message?
Thanks for help.

Hi Erick,
thanks for your Answer.
I can solve this Problem. I have Installed the ACS Version 5.2 but without the new Patch.
With this Patch i can connect to the AD and can see all Groups.
regards
Andreas

Similar Messages

Re: Fwd: Link Problems With Borland C++ 4.52

I have seen this problem before in another context, and I'll offer the
cause and solution in the hope that they will apply to the Crystal problem.
Many Windows based applications rely on PASCAL calling conventions, which
change the way parameters are handled in function/method calls. They
indicate this by placing one of the following immediately before the
function name in the prototype declarations:
- pascal_far (or something like that)
- WINAPI
- some other typedef of either of the above
For example:
int WINAPI AddTotal(int valueA, int valueB);
Unfortunately, v2.0 of Forte does not provide any mechanisms for changing
the calling conventions of the prototypes in the generated C++ wrapper
library, so when you compile that code, the linker fails. I think that the
compiler may generate different symbols depending on calling conventions,
so that's why it fails.
To fix this, don't autocompile your code, but generate the distribution, go
into the generated C++ files and look for the function prototypes (I think
you can search for FORTE_NO_PROTOTYPES), add WINAPI to the appropriate
places in the prototype definitions (see above) and use fcompile to build
the library. Instructions for fcompile are in the Interfacing With
External Systems manual.
Hope this helps,
James
At 11:05 AM 5/29/97 PDT, you wrote:
>
We are trying to wrapper Crystal Reports from Forte. I know that there
are a number of other people in this same boat, as I've seen messages
posted here at various points during the past few weeks. We are having
a particular problem with getting the compile to go through, which we
have sent in to Forte Tech Support. I'm forwarding the message I sent
Tech Support to this group in the hopes that someone here may have
already seen and resolved a similar problem.
Thanks in advance for any help you can offer!
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, Inc. [email protected]
>
Date: Wed, 28 May 97 13:47:20 PDT
From: dg7077a
To: Forte Technical Support
Cc: Gardner, Steve
Subject: Link Problems With Borland C++ 4.52
Name of requestor: [Dale V. Georg / Alaiah Chandrashekar]
Company: [Indus Consultancy Services]
Phone for callback: [(610) 709-3956]
Customer Site: [Mack Trucks, Inc.]
Product: [Forte]
Version of Forte: [2.0.H.1]
Server OS: [SunOS 5.5.1]
Client OS: [Windows 3.1]
DBMS: [Oracle 7.2.3]
Reproducible?: [Yes]
Brief description: [Link Problems With Borland C++ 4.52]
Complete description of problem or question:
We are attempting to write a C-wrapper interface from Forte to Crystal
Reports' Report Engine. We are using Borland C++ version 4.52.
Unfortunately, we have been unable to get a clean compile after a day
and half of effort. We get as far as the link stage of the
compilation, and
the compiler aborts with an "Unknown symbol" error message for each
of the functions we are trying to wrapper. We have tried a number of
ideas to fix this problem, and are continuing to try to solve it on
our own,
but any help would be greatly appreciated. Please have someone call
Alaiah Chandrashekar at the number above as soon as possible.
Thanks!
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, Inc. [email protected]
James Urquhart [email protected]
Product Manager phone: (510) 986-3513
Forte Software, Inc. fax: (510) 869-2092

James,
Thanks for your quick response. Yesterday we had been running down
the path of examining the calling conventions and trying to change them
to PASCAL, but without much success. After receiving your note, we
went back over it again, and this time we were able to finally to piece it
together. In addition to editing the Forte-generated .cc file to declare
the functions as PASCAL, we also had to turn off the compiler's case
sensitivity. (The Crystal .lib file had the function names in mixed case,
but the Borland compiler was generating all uppercase for the names.)
Now I had actually tried this yesterday and it didn't work (in fact it
generated a whole bunch of new errors) - because until we took a
second look at it today, I didn't realize that Borland's linker actually has
TWO flags that control case sensitivity. If you only turn one or the
other off, things can get pretty ugly looking. As soon as we turned
both of them off, the compile and link went beautifully. Again, thanks
for your help; hopefully we are over the worst of it now!
Dale
I have seen this problem before in another context, and I'll offer the
cause and solution in the hope that they will apply to the Crystalproblem.
>
Many Windows based applications rely on PASCAL callingconventions, which
change the way parameters are handled in function/method calls.They
indicate this by placing one of the following immediately before the
function name in the prototype declarations:
- pascal_far (or something like that)
- WINAPI
- some other typedef of either of the above
For example:
int WINAPI AddTotal(int valueA, int valueB);
Unfortunately, v2.0 of Forte does not provide any mechanisms forchanging
the calling conventions of the prototypes in the generated C++wrapper
library, so when you compile that code, the linker fails. I think thatthe
compiler may generate different symbols depending on callingconventions,
so that's why it fails.
To fix this, don't autocompile your code, but generate thedistribution, go
into the generated C++ files and look for the function prototypes (I think
you can search for FORTE_NO_PROTOTYPES), add WINAPI tothe appropriate
places in the prototype definitions (see above) and use fcompile tobuild
the library. Instructions for fcompile are in the Interfacing With
External Systems manual.
Hope this helps,
James
At 11:05 AM 5/29/97 PDT, you wrote:
We are trying to wrapper Crystal Reports from Forte. I know that
there
are a number of other people in this same boat, as I've seenmessages
posted here at various points during the past few weeks. We arehaving
a particular problem with getting the compile to go through, whichwe
have sent in to Forte Tech Support. I'm forwarding the message Isent
Tech Support to this group in the hopes that someone here mayhave
already seen and resolved a similar problem.
Thanks in advance for any help you can offer!
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, Inc.
[email protected]
>
>>
Date: Wed, 28 May 97 13:47:20 PDT
From: dg7077a
To: Forte Technical Support
Cc: Gardner, Steve
Subject: Link Problems With Borland C++ 4.52
Name of requestor: [Dale V. Georg / AlaiahChandrashekar
Company: [Indus Consultancy Services]
Phone for callback: [(610) 709-3956]
Customer Site: [Mack Trucks, Inc.]
Product: [Forte]
Version of Forte: [2.0.H.1]
Server OS: [SunOS 5.5.1]
Client OS: [Windows 3.1]
DBMS: [Oracle 7.2.3]
Reproducible?: [Yes]
Brief description: [Link Problems With Borland C++ 4.52]
Complete description of problem or question:
We are attempting to write a C-wrapper interface from Forte to
Crystal
>>
Reports' Report Engine. We are using Borland C++ version 4.52.
Unfortunately, we have been unable to get a clean compile after aday
and half of effort. We get as far as the link stage of the
compilation, and
the compiler aborts with an "Unknown symbol" error message foreach
of the functions we are trying to wrapper. We have tried a numberof
ideas to fix this problem, and are continuing to try to solve it on
our own,
but any help would be greatly appreciated. Please have someonecall
Alaiah Chandrashekar at the number above as soon as possible.
Thanks!
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, [email protected]
James Urquhart [email protected]
Product Manager phone: (510) 986-3513
Forte Software, Inc. fax: (510) 869-2092-----------------------------------------------------------------------------------
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, Inc. [email protected]
[email protected]------------------

Fwd: Link Problems With Borland C++ 4.52

We are trying to wrapper Crystal Reports from Forte. I know that there
are a number of other people in this same boat, as I've seen messages
posted here at various points during the past few weeks. We are having
a particular problem with getting the compile to go through, which we
have sent in to Forte Tech Support. I'm forwarding the message I sent
Tech Support to this group in the hopes that someone here may have
already seen and resolved a similar problem.
Thanks in advance for any help you can offer!
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, Inc. [email protected]
Date: Wed, 28 May 97 13:47:20 PDT
From: dg7077a
To: Forte Technical Support
Cc: Gardner, Steve
Subject: Link Problems With Borland C++ 4.52
Name of requestor: [Dale V. Georg / Alaiah Chandrashekar]
Company: [Indus Consultancy Services]
Phone for callback: [(610) 709-3956]
Customer Site: [Mack Trucks, Inc.]
Product: [Forte]
Version of Forte: [2.0.H.1]
Server OS: [SunOS 5.5.1]
Client OS: [Windows 3.1]
DBMS: [Oracle 7.2.3]
Reproducible?: [Yes]
Brief description: [Link Problems With Borland C++ 4.52]
Complete description of problem or question:
We are attempting to write a C-wrapper interface from Forte to Crystal
Reports' Report Engine. We are using Borland C++ version 4.52.
Unfortunately, we have been unable to get a clean compile after a day
and half of effort. We get as far as the link stage of the
compilation, and
the compiler aborts with an "Unknown symbol" error message for each
of the functions we are trying to wrapper. We have tried a number of
ideas to fix this problem, and are continuing to try to solve it on
our own,
but any help would be greatly appreciated. Please have someone call
Alaiah Chandrashekar at the number above as soon as possible.
Thanks!
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, Inc. [email protected]
-------------

We are trying to wrapper Crystal Reports from Forte. I know that there
are a number of other people in this same boat, as I've seen messages
posted here at various points during the past few weeks. We are having
a particular problem with getting the compile to go through, which we
have sent in to Forte Tech Support. I'm forwarding the message I sent
Tech Support to this group in the hopes that someone here may have
already seen and resolved a similar problem.
Thanks in advance for any help you can offer!
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, Inc. [email protected]
Date: Wed, 28 May 97 13:47:20 PDT
From: dg7077a
To: Forte Technical Support
Cc: Gardner, Steve
Subject: Link Problems With Borland C++ 4.52
Name of requestor: [Dale V. Georg / Alaiah Chandrashekar]
Company: [Indus Consultancy Services]
Phone for callback: [(610) 709-3956]
Customer Site: [Mack Trucks, Inc.]
Product: [Forte]
Version of Forte: [2.0.H.1]
Server OS: [SunOS 5.5.1]
Client OS: [Windows 3.1]
DBMS: [Oracle 7.2.3]
Reproducible?: [Yes]
Brief description: [Link Problems With Borland C++ 4.52]
Complete description of problem or question:
We are attempting to write a C-wrapper interface from Forte to Crystal
Reports' Report Engine. We are using Borland C++ version 4.52.
Unfortunately, we have been unable to get a clean compile after a day
and half of effort. We get as far as the link stage of the
compilation, and
the compiler aborts with an "Unknown symbol" error message for each
of the functions we are trying to wrapper. We have tried a number of
ideas to fix this problem, and are continuing to try to solve it on
our own,
but any help would be greatly appreciated. Please have someone call
Alaiah Chandrashekar at the number above as soon as possible.
Thanks!
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, Inc. [email protected]
-------------

Link Problem with port 2 in WLC 4402

Hi,
I have a problem with port 2 in Wireless Lan Controler 4402. The problem is that the distribution port 2 of the WLC not link with the switch (3750). We receive the WLC and we follow the autostart wizard and we enable LAG. The wizard finish, I restart the system and all works fine. The two distribution ports of WLC, 1 and 2 appears UP and the LAG works correctly. After this we upgrade the firmware of the WLC to the version AIR-WLC4400-k9-6-0-182-0.aes and we restart the system again but at this time port 2 does not link and port 1 link OK. We do not know the reason why port 2 doesn´t link? Could you help me ?
Thank in advance.
Regards.

Does it properly refuse authentication ? Or does the login page stop appearing or something ?
There was a bug with the webauth dying under heavy load, regardless of number of identical accounts used.
One good way for you to check would be, when problem occurs, to create a second backup guest user and see if that would start working. If it doesn't, the account is not the problem.
I'm not aware of any maximum of usage of the same account.
Which 4.2 exactly are you running ?

Problem with ACS Server

Good morning;
I hope this is the right forum so here it goes. I have an ACS server v4 that keep hanging. If I try to restart the server (CSAuth), the service hangs and the only thing I can do is restart the server. Is there something I can do to fix this or troubleshoot it better?
Thanks

Good morning,
I have the same problem with an ACS 3.3.3 that occasionally restarts CSAuth for a configured function to proceed, but the service keep hanging.
Have you find any solution?
Thanks

Tacacs+ problem with ACS 5.2

I am new with ACS server 5.2 can someone please help me before I bang my head on the wall. I have configured the ACS server 5.2 but still cannot authenticate users. The router can ping the ACS server. With debugging I got the following error message:
Switch#
6d07h: TAC+: Using default tacacs server-group "tacacs+" list.
6d07h: TAC+: Opening TCP/IP to 110.7.111.8/49 timeout=5
6d07h: TAC+: TCP/IP open to 110.7.111.8/49 failed -- Connection timed out; remote host not responding
6d07h: TAC+: Opening TCP/IP to 110.7.111.7/49 timeout=5
6d07h: TAC+: TCP/IP open to 110.7.111.7/49 failed -- Connection timed out; remote host not responding
6d07h: TAC+: send AUTHEN/START packet ver=192 id=3004581909
6d07h: TAC+: Using default tacacs server-group "tacacs+" list.
6d07h: TAC+: Opening TCP/IP to 110.7.111.8/49 timeout=5
6d07h: TAC+: TCP/IP open to 110.7.111.8/49 failed -- Connection timed out; remote host not responding
6d07h: TAC+: Opening TCP/IP to 110.7.111.7/49 timeout=5
6d07h: TAC+: TCP/IP open to 110.7.111.7/49 failed -- Connection timed out; remote host not responding
Your kind help will be highly appreciated.

Did you add the switch as AAA client in ACS box? Make sure you use the correct switch IP when adding it in ACS.
YOu can go to "monitoring and Report" on ACS to check the log to see what happened.

Link problem with Fireworks CS5 - net::ERR_FILE_NOT_FOUND

Hi,
I'm having trouble with the hotspot links in Fireworks CS5. When I've added the links I want and click F12 to preview in Chrome, it loads the page without problems. But when I click on one of the links I get the following message:
Webpage cannot be found
There was no webpage at the adress: file:///C:/Users/Margiiie/AppData/Local/Temp/FWTemp/LinkedPage.htm
Error 6 (net::ERR_FILE_NOT_FOUND): Could not find file or catalogue.
(translated by me from Swedish to English, so it might not be 100% correctly translated).
A few days ago I used Revo Uninstaller Pro to remove some files from my computer, and I remember clicking "Remove temporary Internet Files" on all of the web browsers. This might have something to do with the problem, but I can't seem to able to recover the files I removed..
So, I really need som help here! Do you think that the removal of the temp files is the problem? What can I do about it?
Regards,
Margiiie

If you tried a) refreshing/reloading the page within the browser and b) emptying the contents of the FWTemp folder, and neither of those worked, then I'd take another look at the link itself. Assuming there are other links on the page you've created, compare the links within Fireworks: Are there any differences between them? Would it be possible to re-enter or re-establish the problem link's URL?
One thing I notice in your intial post is that "LinkedPage.htm" seems all by itself within the FWTemp folder, instead of being placed in a subfolder. When I generate a preview in FW, it places the contents in a folder (named with a random number), like this:
file:///Users/doug/Library/Application%20Support/Macromedia/Fireworks%208/FWTemp/24327926/ 00000002.htm
Generally, a website observes a folder hierarchy. I'd kind of expect "LinkedPage.htm" to be in the same folder as the "index.htm" or whatever your problem page is called.
I have to admit, I don't use Fireworks to create and preview web pages, so I'm not completely versed in how it works for a full website. I'm not 100% certain that previewing an individual page should result in a functional preview of an entire site. In other words, I'm not certain that links are supposed to work if they lead to another page within the same site (assuming you're previewing one page at a time). If this remains a problem, I'd suggest letting it go for now. Try File > Export instead, and make sure you're exporting all the pages in the site. If that works, then you're in good shape.

Image Link Problem with Dreamweaver CS4?

On my website, I have several images that link to other parts on my website. These work no problem when I preview the site, but after I test the links, the images that had those links have purple outlines that really clash with my website's design. Will users see this if they click on my links, and then return to the page? I'm using CS4 right now, and never recalled having this issue come up when using MX. Thanks for the help.

I got stuck on this one too - not realising that Dreamweaver automatically palces a border on every image link - but the simplest way I found was to have my "Properties" panel showing on the bottom and input 0 into the "Border" box. By having this panel open you can see if you have accidently applied any styles to the image, where it links to, Image size attributes and the Image name.

Archive Link problem with redundant document names

Hi all,
I have a tricky problem in archive link. I would like to attach some different documents to an HR/PD Organisation unit ( objekttyp pdotype_o )
All customizing works fine but the problem is, all documents attached to one busines object ID have the same name ( in this case objectnumber.pdf)
I am not lucky with this issue because the users must be able to see all documents ( via document finder ) attached to the org. unit and all what the users get, is a list of one or more documents with exactly the same name.
In some cases this are about 10 different documents and this issue is a very bad solution because users have to open all attached docs to recognize which one they need.
During the import/check in of the documents via transaction OAAD and OAWD, SAP renames the original document name.pdf into the related object ID.pdf and there is no way to rerename it or influence this process.
I tried to use some scan software with SAP interface but unfort. with the same result because software of this kind use the archive link interface too and cannot influence the process of check in and rename.
Has anybody an idea ( third party software, customer development or something like this ) to prevent this problem and give me the possibility to stay with the original document names or change it after check in?
Thank you in advance
Rayko

How you fix this problem?
I'm with the same problem. Could you help me please?
Edited by: broullon on Jul 16, 2009 5:31 PM

Link problem with Solaris 9

hello,
i habe a problem in linking my application under the Solaris 9 os using the forte cc environment. Linking on an older machine under Solaris 8 is ok.
I get this error:
ld: fatal: file fz_df_db_anmelden.o: wrong ELF class: ELFCLASS64
ld: fatal: File processing errors. No output written to FZDFNO
There must be a conflict with 32 and 64 bit libraries. How can i link either in 32 or 64 bit. I need both, because the application shall also run on an 32 bit system.
best regards
Stefan

What about the bios settings ? The sony laptop that I have as an install guinea pig had a host of problems as long as plug and play was turned on in the bios then I turned off IrDa and the box seemed a bit quicker. Once I turned PnP off the USB ports started working as well as an external hp 3button mouse. Still no luck with the PCMCIA NIC's though...

OCCI link problem with gcc2.96 in Redhat7.2, Oracle9.0.1

When I compiled and linked the occi program occidml.cpp with dynamic shared library, all was OK.
But when occidml run, segmentation fault happened.
I'v read a topic that we can build the program with static library to avoid segmentation fault.
So, I recompiled the program and I used the following command to relink it.
/usr/bin/g++ -L/ora9/lib/ -L/ora9/rdbms/lib/ -o occidml occi
dml.o -lclntst9 -locci9 -ldl -lm
But, a lots of errors happened:
/ora9/lib//libocci9.a(occiAnyDataImpl.o): In function `oracle::occi::AnyDataImpl::s
etNull(void)':
occiAnyDataImpl.o(.text+0x2c2c): undefined reference to `OCIAnyDataConvert'
/ora9/lib//libocci9.a(occiAnyDataImpl.o): In function `oracle::occi::AnyDataImpl::g
etDate(void) const':
occiAnyDataImpl.o(.text+0x2cba): undefined reference to `OCIAnyDataAttrGet'
/ora9/lib//libocci9.a(occiAnyDataImpl.o): In function `oracle::occi::AnyDataImpl::s
etBlob(oracle::occi::Blob const &)':
occiAnyDataImpl.o(.text+0x2d83): undefined reference to `OCIAnyDataAttrSet'
/ora9/lib//libocci9.a(occiAnyDataImpl.o): In function `oracle::occi::AnyDataImpl::s
etClob(oracle::occi::Clob const &)':
occiAnyDataImpl.o(.text+0x2e13): undefined reference to `OCIAnyDataAttrSet'
/ora9/lib//libocci9.a(occiAnyDataImpl.o): In function `oracle::occi::AnyDataImpl::s
etBfile(oracle::occi::Bfile const &)':
occiAnyDataImpl.o(.text+0x2ea9): undefined reference to `OCIAnyDataAttrSet'
/ora9/lib//libocci9.a(occiAnyDataImpl.o): In function `oracle::occi::AnyDataImpl::s
etNumber(oracle::occi::Number const &)':
occiAnyDataImpl.o(.text+0x2f4c): undefined reference to `OCIAnyDataAttrSet'
/ora9/lib//libocci9.a(occiAnyDataImpl.o): In function `oracle::occi::AnyDataImpl::s
etDate(oracle::occi::Date const &)':
occiAnyDataImpl.o(.text+0x2ff3): undefined reference to `OCIAnyDataAttrSet'
/ora9/lib//libocci9.a(occiAnyDataImpl.o)(.text+0x30b8): more undefined references t
o `OCIAnyDataAttrSet' follow
Who can help me ? Is the static library libocci9.a with any problem?

I tried clicking on the link and nothing whatsoever happened. So I tried a control click and selected "Open Link in new window" and a new window opened, followed by the Utilities folder opening. I made a test.html file with the link in it, put it on my startup drive and it worked as expected, and ditto for putting it on a second internal drive. I then put it on my iDisk and navigated to it thru its web site address of
http://homepage.mac.com/francines/testlinks.html
and discovered that the two other "local" operation links (to launch ScriptEditor) both worked, but the open folder link no longer did, except by using control click and choosing either "Open link in new window" or new tab. A new Safari window or tab opens, then the Utilities folder opens.
I then tried the page in Firefox, and it didn't work AT ALL, not even with new window or tab. I then tried Mozilla and Netscape. Same deal. The ancient Internet Explorer opened the Utilities folder inside a new browser window rather than the Finder. This might be a clue as to why the link doesn't work as expected, but unfortunately I don't know what it means.
Francine

Tacacs problem with ACS 4.2 NDG and shell authorization sets

Hi all,
I am trying to solve this problem without success so far. I have fresh ACS 4.2.15 patch 5 ACS installation and I am tryng to deploy it to our environment. So I have configured one 2960S to be my test client and everything works fine. Problem is when I try to create fine grained policies using network device groups and shell authorization sets.
I have created shell authorization sets called ReadOnly and FullAccess. I have also created NDG called FloorSwitches and added my 2960. I have 2 user groups called FloorSwitchesReadOnly and FloorSwithcesFullAccess. Now, if I configure group FloorSwitchesFullAccess and assign Shell command authorization set per NDG and then log into the switch, all of my commands are refused as unauthorized.
One thing that I have noticed is that if I assign shell command authorization set to any device ( in user group settings ) it works fine. Or if I create association with DEFAULT NDG in user group it also works. So my conclusion is that ACS for some reason does not associate my switch with correct group but rather puts it to DEFAULT group for some reason.
Did anyone had similar problem or is there something that I am doing in a wrong way? Is there another way to achieve such thing without using NDG's?
Thanks everyone....

Please upgrade to patch 6, there is a bug in patch 5 and you can check the release notes or the readme for more information.
What is your user setting set to while you are testing command authorization, did you set it back to the group setting?
Thanks,
Tarik Admani

Problems with ACS View Eval

Hi,
i have installed the eval 4.0 ACS view.
If i would generate a report following message, comes a windows with:
Exeption
Version Mismatch
See Stack Trace
Know someone a solution.
Thank you.

The problem was not enough disk space. My initial VM had only 32 GB. I got a larger disk and a 50 GB VM and the install went well.

FCP I-Link problem with DSR-1500A

FCP 6.01, G5 and OSX will not work with Sony DSR-1500A. System Profiler recognizes that something is plugged in, the color wheel spins for a while then I get a warning that the device can not be recognized. The I-Link indicator on the DRS-1500A never stops blinking. I have used two different DSR-1500A's and Two different FCP systems. The DSR-1500A works fine when I connect the DSR-11 as an I-Link source.

Thank you for your input.
It seems that the series in which the device come up is important.
I shut the DSR-1500A and my laptop down.
Installed the firewire cable.
Powered up the DSR-1500A
Powered up my MacBook Pro
Started Systems Profiler which reported the deck 1503 interface card not a DSR-1500A deck.
I link light continued to blink.
I played a tape in the 1500A and got A/V into my MacBook Pro.
Tried the same process on my second DSR-1500A and still got the error message that the device could not be listed. Max bus speed 800 Mb/s
Tried the same process with my G5 and got the same error message.
I think I have one bad 1503 board on one of my DSR-15000A's and I think that the Mac's have a problem identifying and linking to the DSR-1500A.
So My problem is still unsolved.
Anyone else out there interfacing a SR-1500A with their FCP?

Linker problem with M series card

I am attempting to incorporate a PCI 625 DAQ M series card into a Borland C++Builder application. To get started I have used the code from the example "ContAccelSamps-IntClk-AnlgStart" in the documentation. I have added "nidaq32.lib" to the project and included "nidaq.h" and "NIDAQmx.h" as in the example.
Everything compiles correctly. However on linking I get the error message "NIDAQ32.LIB contains invalid OMF record, type 0x21 (possibly COFF). I am not sure what this means.
Is this a bug in NIDAQ32.LIB or am I missing something simple here?
In an attempt to resolve the problem I have rebuilt the library from the dll, but this doesn't work either, the new library is only 215 KB whereas the original one is 886 KB.
So as a su
bsidiary question might I ask how you build libraries from NI dlls.

Hello,
I apologize for the confusion around this. Currently, the NI-DAQmx C import library for Borland is only installed with LabWindows/CVI DAQ support. However, I am attaching the NI-DAQmx 7.3 import library that you will need for Borland support. We are working on posting this in a Knowledge Base on our website. Here is a link to another discussion forum thread in which a customer used with borland's "coff2omf" to work-around the linker issues they were seeing. This link also discusses another problem you may run into with floating point initialization that you may need to take into account. Hopefully this information will enable you to get your application working with Borland and M Series. If not, please let us know.
http://exchange.ni.com
/servlet/ProcessRequest?RHIVEID=101&RPAGEID=137&HOID=5065000000050000005EC50100&HTHREAD=000116062&UCATEGORY_0=_30_%24_12_&UCATEGORY_S=0
thanks,
Nicole
Attachments:
NIDAQmx.lib ‏487 KB

AD Link Problem with ACS 5.2

Similar Messages

Maybe you are looking for