AD-OID and WNA Question

Two questions:
Is it necessary to configure AD-OID integration to use Windows Native Authentication?
Can I populate OID with my Active Directory users once and still use WNA?
Thanks,
Jim

Update to my original post:
After successfully configuring AD-OID synchronization and WNA on a Win2003 Server (and opening multiple SRs in the process), I learned that it IS possible to bootstrap the users once from AD into OID.
Bootstrapping is required to import the users' krb5principalname and orclsamaccount attributes into OID, which are used by the SSO server to authenticate their kerberos tickets.
Synchronization between AD-OID is not required for WNA to work, but it helps if you expect to add new users from AD into OID.
HTH,
Jim

Similar Messages

Creating a new context in OID and extending DIT

I am developing a portal. I need to create a new context in the OID and extend the DIT so that i can store Subscriber information in it. Please help me with the procedure, and sample schema.
thanks in advance,
udai.

Hello JB-Baby
You can't create a subfolder in Sent. Mail does this automatically for each account you set up. If you wish to organise messages you send by some criteria or other, why not consider a Smart Mailbox?
I assume by your second question you mean can you change the columns in the message viewer? Yes you can. You select View -> Columns and check the ones you want. You can adjust the order of the columns by dragging the titles around in the message viewer.
If you didn't mean this, maybe you could explain what you are after in a little more detail.

OID and MS Active Directory LDAP information Synchronization

Do you know have to do the integration between OID and MS active Directory? How to synchronize the LDAP information between two?

Hi, I have the same question.
Thanks,
Malin

OID and MS Active directory integration in 9ias

How to integrate OID with MS Active directory ?
We have 9ias and Portal . How to use the username/password in MS AD for Portal authentication ? As far as I know 9ias is using OID , so the question comes down to how to replicate MS AD information to OID ?

Hi, I have the same question.
Thanks,
Malin

Install Forms and Report 11g, Weblogic, OID and SSO ?

Hello,
I want to migrate our system from Forms and Reports 6i to 11g with weblogic server 10.3.3 and I have two questions:
1st: If we considered to obtain a system consists of (Weblogic 11g + Forms and Reports 11g + OID + SSO + Weblogic Portal + BI Publisher)
What is the steps and the sequence of products installation and configuration, and what is the required versions of each one ?
2nd: Can I abandon OID and SSO, is there a substitute ?
If so, what's the steps and the sequence of products installation and configuration ?
Thank you very much

>
You use the Oracle WebLogic Server installer to install Oracle WebLogic Server and to create a Middleware home (which is required before you can install Oracle Forms and Reports).
For Oracle Forms and Reports 11g Release 2 (11.1.2), download Oracle WebLogic Server 11g (10.3.5) from OTN or Oracle Software Delivery Cloud.
Be sure to select the proper Oracle WebLogic Server installer for your platform.
>
weblogic you can download from http://www.oracle.com/technetwork/middleware/ias/downloads/wls-main-097127.html

Account with an icon of a face and a question mark

Same issue of other user in Yosemite Apple Support.
Following advises on that thread I also installed the ETRECHECK software tool, report is as follows:
Problem description:
At the login screen I find an icon with a face and a question mark in it - with a message it needs an update.
EtreCheck version: 2.1.5 (108)
Report generated 02 gennaio 2015 12:37:26 CET
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1600 MHz ok
BANK 1/DIMM0
8 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 1:22:54
Disk Information: ℹ️
APPLE HDD HTS545050A7E362 disk0 : (500,11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 498.89 GB (467.03 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
User Login Items: ℹ️
iTunesHelper Applicazione (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox ApplicazioneHidden (/Applications/Dropbox.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 600 - SDK 10.10
Safari Extensions: ℹ️
Pin It Button [Installed]
Save to Pocket [Installed]
Add To Amazon Wish List [Installed]
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      14% WindowServer
      3% hidd
      2% Safari
      1% Dock
      0% fontd
Top Processes by Memory: ℹ️
333 MB com.apple.WebKit.WebContent
155 MB mds_stores
137 MB Safari
137 MB Finder
86 MB Dropbox
Virtual Memory Information: ℹ️
7.76 GB Free RAM
4.88 GB Active RAM
3.28 GB Inactive RAM
1.26 GB Wired RAM
4.73 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Jan 2, 2015, 11:15:06 AM Self test - passed
Jan 2, 2015, 12:06:57 AM /Library/Logs/DiagnosticReports/Dropbox109_2015-01-02-000657_[redacted].cpu_res ource.diag [Details]
---------- is there any troubleshooting for delete that fake account every time I start my Macbook Pro?
thanks and regards
Edoardo

Smiley face with a ? means a bootable system is not found.
There maybe a problem with either system software or hard drive itself.
Try this.
Repair Disk
Steps 2 through 8
http://support.apple.com/kb/PH5836
Best.

I am trying to build a basic TCL skeleton script that reads a remote SNMP OID and displays the value on the screen.

I am trying to build a basic TCL skeleton script that reads a remote SNMP OID and displays the value on the screen.
I don't want it to be an EEM Event, I just want to run it from the (tcl)# prompt.
So I guess I'm asking if you can use cli_exec and other commands in the "namespace import ::cisco::eem::*" in a normal non-EEM script - can I do that?
This is the error I get:
OTN.159(tcl)#source flash:TCL_SNMP_Remote_Read.tcl
invalid command name "::cisco::eem::event_register_none"             ^
% Invalid input detected at '^' marker.
What am I missing?
================= TCL_SNMP_Remote_Read.tcl ==============================
::cisco::eem::event_register_none
namespace import ::cisco::eem::*
namespace import ::cisco::lib::*
if [catch {cli_open} RESULT]
    { error $RESULT $errorInfo }
    else { array set cli1 $RESULT }
if [catch {cli_exec $cli1(fd) "snmp get v2c 192.168.1.100 public timeout 1 oid 1.3.6.1.2.1.1.1.0" } RESULT]
       { error $RESULT $errorInfo }
       else { set SnmpSysDesc $RESULT }
if [catch {cli_close $cli1(fd) $cli1(tty_id)} RESULT] {
            error $RESULT $errorInfo
puts $SnmpSysDesc
=========================================================================
In the sho-run config I have:
event manager directory user policy "flash:/"
event manager session cli username "cisco"
Any help to get me started would be greatly appreciated!
Tim

If you don't want an EEM policy, then don't use any of the EEM constructs. Instead, all you need is this:
set output [exec "snmp get v2c 192.168.1.100 public timeout 1 oid 1.3.6.1.2.1.1.1.0"]puts $output

Performance issue and functional question regarding updates on tables

A person at my site wrote some code to update a custom field on the MARC table that was being copied from the MARA table. Here is what I would have expected to see as the code. Assume that both sets of code have a parameter called p_werks which is the plant in question.
data : commit_count type i.
select matnr zfield from mara into (wa_marc-matnr, wa_marc-zfield).
update marc set zfield = wa_marc-zfield
     where werks = p_werks and matnr = wa_matnr.
commit work and wait.
endselect.
I would have committed every 200 rows instead of every one row, but here's the actual code and my question isn't around the commits but something else. In this case an internal table was built with two elements - MATNR and WERKS - could have done that above too, but that's not my question.
            DO.
              " Lock the record that needs to be update with material creation date
              CALL FUNCTION 'ENQUEUE_EMMARCS'
                EXPORTING
                  mode_marc      = 'S'
                  mandt          = sy-mandt
                  matnr          = wa_marc-matnr
                  werks          = wa_marc-werks
                EXCEPTIONS
                  foreign_lock   = 1
                  system_failure = 2
                  OTHERS         = 3.
              IF sy-subrc <> 0.
                " Wait, if the records not able to perform as lock
                CALL FUNCTION 'RZL_SLEEP'.
              ELSE.
                EXIT.
              ENDIF.
            ENDDO.
            " Update the record in the table MARC with material creation date
            UPDATE marc SET zzdate = wa_mara-zzdate
                       WHERE matnr = wa_mara-matnr AND
                             werks = wa_marc-werks.    " IN s_werks.
            IF sy-subrc EQ 0.
              " Save record in the database table MARC
              CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
                EXPORTING
                  wait   = 'X'
                IMPORTING
                  return = wa_return.
              wa_log-matnr   = wa_marc-matnr.
              wa_log-werks   = wa_marc-werks.
              wa_log-type    = 'S'.
              " text-010 - 'Material creation date has updated'.
              wa_log-message = text-010.
              wa_log-zzdate = wa_mara-zzdate.
              APPEND wa_log TO tb_log.
              CLEAR: wa_return,wa_log.
            ELSE.
              " Roll back the record(un save), if there is any issue occurs
              CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'
                IMPORTING
                  return = wa_return.
              wa_log-matnr   = wa_marc-matnr.
              wa_log-werks   = wa_marc-werks.
              wa_log-type    = 'E'.
              " 'Material creation date does not updated'.
              wa_log-message = text-011.
              wa_log-zzdate = wa_mara-zzdate..
              APPEND wa_log TO tb_log.
              CLEAR: wa_return, wa_log.
            ENDIF.
            " Unlock the record from data base
            CALL FUNCTION 'DEQUEUE_EMMARCS'
              EXPORTING
                mode_marc = 'S'
                mandt     = sy-mandt
                matnr     = wa_marc-matnr
                werks     = wa_marc-werks.
          ENDIF.
Here's the question - why did this person enqueue and dequeue explicit locks like this ? They claimed it was to prevent issues - what issues ??? Is there something special about updating tables that we don't know about ? We've actually seen it where the system runs out of these ENQUEUE locks.
Before you all go off the deep end and ask why not just do the update, keep in mind that you don't want to update a million + rows and then do a commit either - that locks up the entire table!

The ENQUEUE lock insure that another program called by another user will not update the data at the same time, so preventing database coherence to be lost. In fact, another user on a SAP correct transaction, has read the record and locked it, so when it will be updated your modifications will be lost, also you could override modifications made by another user in another luw.
You cannot use a COMMIT WORK in a SELECT - ENDSELECT, because COMMIT WORK will close each and every opened database cursor, so your first idea would dump after the first update. (so the internal table is mandatory)
Go through some documentation like [Updates in the R/3 System (BC-CST-UP)|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCSTUP/BCCSTUP_PT.pdf]
Regards

How can i restore my iphone 5s as i forgot my icloud password and sec questions

I bought a new iphone 5s (32G Gold)
and when I connect it to itunes asked me to restore from my old iphone 4
with all my account settings and passwords.
but I have a problem with my account for icloud password and security questions because my cloude id is *************** and with no problem with my apple id "*****************", I tried to restore my new iphone after I turned off find my iphone from icloud setting and when its restore was finished the iphone is locked and asked me to unlock the iphone with a ****************** that I forget the password and security questions and when I tried to enter my account id "**************** with no problem with its password it says to me "this account can't unlock this iphone"
when I visit tradeline (Apple products dealer) I found no answer and they adviced me to contact apple directly.
Name : Alaa Rashed Abd el Hafiz
Country : egypt
<Personal Information Edited by Host>

First, remove your personal information from your post. That's not needed here. This is a public forum, and it is unwise to provide your personal data online.
Second, here's how you reset your password and/or security questions.
How to reset your Apple ID password.
Go to iforgot.apple.com and type in your Apple ID, then click 'Next'.
Verify your date of birth, then click 'Next'.
You'll be able to choose one of two methods to reset your password, either E-Mail Authentication or Answer Security Questions.
If neither method works, then go to https://getsupport.apple.com
(If you see a message that says 'There are no products registered to this Apple ID, simply click on 'See all products and services')
Choose 'More Products & Services', then 'Apple ID'.
A new page will open.
Choose 'Other Apple ID Topics', then 'Lost or forgotten Apple ID password'.
Click the blue 'Continue' button.
Select the contact option that suits your needs best.
How to reset your Apple ID security questions.
Go to appleid.apple.com, click on the blue button that says 'Manage Your Apple ID'.
Log in with your Apple ID and password. (If you have forgotten your Apple ID password, go to iforgot.apple.com first to reset your password with a password recovery email)
Go to the Password & Security section on the left side, and click on the link underneath the security questions that says 'Forgot your answers? Send reset security info email to [email]'. This will generate an automated e-mail that will allow you to reset your security questions.
If that doesn't work, or there is no rescue email link available, then click on 'Temporary Support PIN' that is in the bottom left side, and generate a 4-digit PIN for the Apple Account Security Advisor you will be contacting later.
Next, go to https://getsupport.apple.com
(If you see a message that says 'There are no products registered to this Apple ID, simply click on 'See all products and services')
Choose 'More Products & Services', then 'Apple ID'.
A new page will open.
Choose 'Other Apple ID Topics', then 'Forgotten Apple ID Security Questions'.
Click the blue 'Continue' button.
Select the contact option that suits your needs best.

How can we get ADFSecurity work when used in OC4J, OID and OAM?

I am getting error in http server log "mod_oc4j: Response status=499 and reason=Oracle SSO, but failed to get mod_osso global context."
But I am not using Oracle SSO and my client doesn't want to use it either, I am using OAM SSO(CoreIDSSO) in my configuration. Please read the details below.
I am using ADFSecurity in an app that is protected by OAM. To migrate ADFSecurity permissions from
system-jazn-data.xml to OID, I used JAZNMigrationTool to populate OID with Grantees and Permissions. OAM gives login page, and authentication works fine.
But ADFSecurity is not working. ADFComponent Delete button is enabled even for roles that dont have permissions for the iterator delete.
- The app works fine when I use without OAM. ADF Security permissions work fine.
- The app works fine when used with OAM, but with ADFSecurity disabled (enforce=false).
- When I enforce ADFSecurity alongwith OAM, ADFSecurity is not working.
In the doc "Oracle Containers for J2EE Security Guide b28957", there is a mention of use of CoreIDPrincipal for permissions. Our OID Permissions entries show
LDAPRealmRole for attribute orcljaznprincipal. I am not sure if this could be the reason.
We have configured AccessServerSDK for the SOA instance and have policy for the urls in the policy manager. We have entries in orion-application.xml, orion-web.xml and system-jazn-data.xml as per the documentations.
How can we get ADFSecurity work when used with OID and OAM?

Have you been able to successfully integrate OAS with OAM & OID? We have similar requriement and so far we have not been able to get it working.
We have application specific roles which we map to OID roles using orion-application.xml.
Any pointers to achieve this would be greatly appreciated.
thanks,
Dipal

I have purchased music with my old apple id, old computer and old email. My old email and computer are not available anymore and I dont remember my password and securtiy question anymore. How can I authorise my old apple id to authorise the new computer?

Hi, I have a new computer and new apple id. I've purchased music with my old computer, email and apple id.
I cant access now the previously purchase music, because it wants to authorize the new computer to play the
music. I cant remember password and security questions for my old id and the old email doest exist anymore.
What can I do?

Hi, Carmen.
Thank you for visiting Apple Support Communities.
If you need to reset you security questions, do not know the answers and no longer have access to that email account, see the last sentence under Note in step 5.
You'll be asked to answer 2 of your 3 security questions before you can make any modifications. If you are unable to remember your answers, you can choose to send an email to your rescue email to reset your security questions.
Note: The option to send an email to reset your security questions and answers will not be available if a rescue email address is not provided. You will need tocontact iTunes Store support in order to do so.
Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/ht5312
Cheers,
Jason H.

Spam filtering solution for iPhone and a question.

I've read a lot of posts about spam filtering for the iPhone and have yet another solution and a question. I use SpamSieve and I am not affiliated with them in any way. The nice thing about SpamSieve is that if it is the first rule in your Mail.app rule set any mail that follows has already been filtered. All you need to do then is create another rule that redirects email to what ever mail account you choose. Since my ISP allows multiple accounts, I will simply create an iPhone@myISP account.
Now the question. Is it possible to write an applescript that will turn the redirect rule on or off so that I don't have to dig into the rules section of Mail to get this done?
Thanks

Is it possible to write an applescript that will turn the redirect rule on or off so that I don't have to dig into the rules section of Mail to get this done?
not at present time

HT1553 I did the back up as instructed... Installed a larger hard drive and followed the restore instructions... Now I get a white screen with a folder icon and blinking question mark. When trying to set startup with new drive I get a bless tool error...

I did the back up as instructed... Installed a larger hard drive and followed the restore instructions... Now I get a white screen with a folder icon and blinking question mark. When trying to set startup with new drive I get a bless tool error... Help!!

If you have installed a new hard drive , you will need to have formatted it in Disk Utility correctly. This may explain your problem.
Boot into your 10.6 Install disk again at the top menubar > Utilities > select Disk utility and in there select your new hard drive, and select the tab Erase and choose to make the format as Mac OS Extended Journaled. When that is finished look in the main window to make sure that the partition map scheme says GUID Partition Table.
Now go to the Restore tab and reinstall from your backup.

Trying to download songs on iTunes and it's asking for "my 1st car I owned" and other questions that I never answered. It won't let me download anything til I answer them. Can you help me?

Trying to download songs on iTunes and it's asking for "my 1st car I owned" and other questions that I never answered. It won't let me download anything til I answer them. Can you help me?

You need to contact Apple to get the questions reset. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
(94816)

I want to integrate SMS gateway to Cisco ISE 1.2 and my question is SMS notifications are supported for Guest self−registration

I want to integrate SMS gateway to Cisco ISE 1.2 and my question is
SMS notifications are supported for Guest self−registration Services ? or it should be done by Sponsor

I'm not sure I understand the question. Do you want to log in to the Sponsor Portal using AD credentials?
Create an Identity Source Sequence using AD as an Authentication Source. Go to Administration > Identity Management > Identity Source Sequences. Either Edit or +Add a Sequence and choose from the Authentication Sources shown.
Then choose that Identity Source Sequence by going to Administration > Web Portal Management > Settings. Double-click Sponsor from the Left Menu and click Authentication Source. Choose the Identity Source Sequence. Click Save.
I hope this helps.
Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question. Otherwise, feel free to post follow-up questions.
Charles Moreton

AD-OID and WNA Question

Similar Messages

Maybe you are looking for