Ad providers discussion: PubCenter, Smaato, InnerActive, AdMob, MobFox, VServ.mobi, MillennialMedia, InMobi, AdDuplex, komlimobile, adwired, mOcean

Hello,
I would like to start a discussion about the Windows Phone and Windows ad providers.
What about your experience with it? Regarding:
- eCPM
- fill rate (%)
- How they paying on time
- Stability: crashes, errors, startup time, ... etc
- Which SDK version do you use
- Others: like reporting
Currently I found these ad providers for Windows Phone and Windows platform:
- PubCenter
- Smaato
- InnerActive
- AdMob
- MobFox
- VServ.mobi
- MillennialMedia
- InMobi <= they are canceled windows
- AdDuplex
- komlimobile
- adwired
- mOcean

Similar Messages

Welcome to the Service Providers General discussion

Welcome to the Cisco Networking Professionals Connection Service Providers Forum. This topic will provide you the opportunity to discuss issues surrounding General Service Provider solutions. We encourage everyone to share their knowledge and start conversations on issues such as storage Cable, DSL, WiMAX, and any other topic concerning SP networking.
Remember, just like in the workplace, be courteous to your fellow forum participants. Please refrain from using disparaging or obscene language or posting advertisements.
We encourage you to tell your fellow networking professionals about the site. If you would like us to send them a personal invitation simply send their names and e-mail addresses along with your name to us at [email protected]
Dan Bruhn
NetPro Community Manager

Welcome to the Cisco Networking Professionals Connection Service Providers Forum. This topic will provide you the opportunity to discuss issues surrounding General Service Provider solutions. We encourage everyone to share their knowledge and start conversations on issues such as storage Cable, DSL, WiMAX, and any other topic concerning SP networking.
Remember, just like in the workplace, be courteous to your fellow forum participants. Please refrain from using disparaging or obscene language or posting advertisements.
We encourage you to tell your fellow networking professionals about the site. If you would like us to send them a personal invitation simply send their names and e-mail addresses along with your name to us at [email protected].
Dan Bruhn
NetPro Community Manager

Ask the Expert Live Discussion – BT Infinity

Hi All
I’m pleased to announce our next live discussion with some BT experts! It’s on a subject that is of great interest to many of you – BT Infinity! We’ve recently announced the changes to the BT Infinity service and thought it was a great chance to get our Infinity experts on to the community to tell you a bit more about that and answer any Infinity related questions you may have.
Our experts Charles and Martin will be chatting with you on Tuesday 15th May at 7pm.
The format is pretty simple – simply come back here on that date and the box you see below will turn into an area where you can submit your questions. Enter your email address in the reminder section so you don't miss any of the chat.
BT Infinity Expert Chat Transcript
(05/15/2012)
7:00
KerryG:
Hi Everyone, let’s get the chat started! Welcome to our live discussion with our BT Infinity experts.
7:01
KerryG:
Today we are joined by Charles and Martin from the Infinity team. Welcome everyone!
7:01
KerryG:
Today’s chat is tech focused on BT Infinity, so if you have any individual service queries, we can’t answer them during the chat, sorry. Those queries can be raised in the forum as normal. This chat is focused on the Infinity service itself, all comments will be moderated and the usual forum terms apply.
7:01
Charles:
Hi everyone!
7:02
KerryG:
We have our first question...
7:03
Comment From GedGed:
my wired infinity speed is 54 kps but I can only get 20 when wireless - any way I can improve the wireless speed - Thanks
7:04
KerryG:
We're typing up the answers, so bear with us as we get the answers through to you...
7:05
Charles:
Hi Ged
• Upgrade your computer to ‘N’ standard wireless hardware. If needed, buy a suitable N wireless adaptor from BT atwww.bt.com/nwireless
• Keep your computer streamlined eg. by running our ‘PC Healthcheck’ app (part of BT’s Desktop Help software atwww.bt.com/desktophelp)
• Reserve wireless for mobile devices, use Ethernet for main computer
• Consider powerline adaptors for longer ranges
7:05
Comment from
john 46
hi all
7:06
KerryG:
Hi gooch - thanks for your question, but this is an Infinity tech chat so we need to keep it on topic if you post in the Phones board there's lots of helpful community members that will help you out with your query
7:07
Comment From Neil Potter
How soon after an exchange goes live with Infinity will BT allow other providers to sell Fibre To The Cabinet services from that exchange? My existing ISP is waiting to announce pricing details to me so I can make an informed choice. Thanks
7:08
KerryG:
Hi John Good to see you on the chat - who else is here?
7:09
Comment From Chris
Hello world.
7:10
Comment From Helen
hi all.
7:11
Comment From Paul
Are we able to get fastpath on BT infinity,or will this ever be available ?
7:12
Martin S.:
i Neil. When Openreach enables an exchange for fibre, all internet service providers are able to use that service equally - so other ISPs should be able to offer their fibre products at the same time as BT Retail's Infinity product
7:12
KerryG:
Thanks for all the great questions coming through guys... answers being typed as we speak!
7:13
Charles:
Hi Paul, We don't support Fastpath on BT infinity at the moment, I'm afraid.
7:13
Comment From Helen
I've recently upgraded to Infinity 2. The ethernet connection is fine, but the wifi is constantly dropping. I have an old Homehub 2 , which we had for total broadband, will it work, so I can test the wifi.
7:14
Comment From Simon
Hi all
7:15
Martin S.:
Neil - also its worth remembering that when an exchange is enabled for fibre, this does not automatically mean that all cabinets and lines connected to that exchange are also enabled, which might explain if your exchange has been enabled but your line is not appearing as eligible yet
7:16
Comment From Kevin
Whats the upgrade path from fttc to fttp does it mean a new contract or can we just expect it to migrate?
7:17
KerryG
Out of interest...are those on the chat existing Infinity customers or people thinking about it?
7:18
Charles
Hi Helen, your wireless should work ok on your Hub 2, though our more recent Hub 3 is better. If you're expereincing drop outs, it's usually a sign of radio interference. Have you any powerline adaptors you could use instead?
7:18
Comment From Neil Potter
Thanks Martin - Workmen recently dug up the path outside my driveway to install FTTC so I know it's there  My exchange goes live on 30th June - I can't wait!I have another question: I'm in the process of consolidating my TV, Telephone and Broadband into one bundle. The "BT Vision Unlimited" looks ideal.
7:19
Comment From Paul
Is there a estimated date that fast path will be available ?
7:19
Martin S.
Hi Kevin - Due to the structure of how fibre has been deployed, your line will either be FTTC or FTTP; there is no way to change your technology type. If you mean 'how do you move to the faster 80mb product (on FTTC)?', this can be done using the links on BT.com
7:19
Comment From Helen
I'm an existing customer.
7:19
Charles
No, 'fraid not, Paul.
7:19
Comment From Neil Potter
thinking about re-joining BT just for Infinity product(s)
7:19
Comment From Paul
existing customer here
7:20
Comment From Chris
I've recently ordered my Infinity package, installation is due the 22nd.
7:20
KerryG
Great to see you all on here... roll on the 22nd for you Chris
7:20
Comment From Kevin
Why are you fitting 2 separate items a modem and a wireless router? cant we have a combined unit, without the need for 2 adaptors and sockets its not the tidiest install
7:21
Comment From Chris
Regarding the Infinity installation, is it mandatory for the BT O/R Engineerer to have access to your PC?
7:22
Martin S.
Hi Chris - It is not mandatory, but we recommend allowing the engineer to show you on your own equipment your fantastic new speeds!
7:22
Comment From Simon
hi, im trying to setup port forwarding to my old draytek, as it has more powerful wirelelss capabaility then the bt homehub, is it possible
7:23
KerryG
Hi Simon - that sounds like a great question for the forum boards, the Draytek is not a BT product so we can go into detail here in this chat, but there will be lots of people who i'm sure can help in the forum.
7:24
Charles
Evening Kevin, for BT Infinity is based on thecurrent FTTC product offered by BT Openreach, which comprises the VDSL modem provided by Openreach and the Home Hub 3 provided by Retail. If/when Openreach move to supporting a single box solution, then we would look to moving to that. Openreach will shortly be trialling this.
7:24
Comment From Helen
I've already checked there's nothing interfering with the Hub.
7:24
Comment From Helen
I don't have a Hub3, both the one that is currently connected, and the old one I have in the box are Hub 2.
7:25
Comment From Chris
Yes, going from 3mb to an estimated 50mb+ is quite the upgrade, I would even be happy if it was merely a 10MB upgrade. - If I remember correctly FTTC is around(if not the same) price as standard broadband these days.
7:26
Charles
Helen - could you post your issue in the Bt Infinity forum and one of our mods will look into this for you.
7:26
Comment From Kevin
My install is planned for the 28th May my question is i have my master socket downstairs directly below the room i want my fttc modem installed is it possible to have the modem upstairs with the extension cable ?
7:27
Comment From Mike B
I have an istalation question. I understand that the modem for Infinity needs to be sited close to the BT phone socket. Am I right in thinking that the modem is then connected via a Cat 5/6 cable to the wireless router situated elsewhere in the house? Does this impact on the speed?
7:27
Comment From Helen
Ok charles, I will do..
7:28
Comment From Neil Potter
On the subject of Powerline Adaptors (PA's) - I have a unique setup here at home whereby I would need to utilise 4 x PA's. Are there any known performance issues sharing data, experiencing latency or dropped packets from Desktop PC's all connected via PA's at the same time?
7:28
Martin S.
Kevin / Mike B: The engineer can use an extension cable up to 30m long to help position your equipment where you want it - this should not affect your speed.
7:29
Comment From Eric Simpson
I have bt broadband .. I am currently getting 3M download. I have two "estimates" from the BT site. One says I should get between 10-17 ... the other which does some sort of check/diagnostic (and appears to be the real thing) says I should get between 1-4. We are meant to get Infinity next month. How would that impact me?
7:31
Charles
Hi neil - good question. I've found from experience that powerline performance is very much dependent on the adaptor manufacturer and your home environment, specifically how 'clean' your electrical spectrun is. All I can say is give it a try. That said, i would always recommend an Ethernet connection for the fastest and most stable speeds.
7:31
Martin S.
Hi Eric. You can find your predicted BT Infinity speed (if it is available on your line) at bt.com/infinity and entering your number into the availability checker
7:31
Comment From Simon
hi, really I'm just asking a tech question - can the bt home hub port forward?
7:32
Comment From Eric Simpson
Does my question pop up only when it comes up the queue?
7:33
KerryG
Hi Eric - Yes, they will flow in as they get answered - it helps to make the chat easier to read as the Q & As flow in a reasonable order.
Great questions coming through... lots more to get through...been a quick 33 mins!
7:33
Charles
Hi simon - I'm assuming you're talking about the Hub 3 (our latest Hub). Yes, it does support port forwarding. You can set this up via the configuration menu in your Hub. See instructions in your Hub user guide for how to do this.
7:33
Comment From Glynn
Will BT Retail be selling fibre-on-demand at an affordable cost for home users?
7:35
Comment From guilbo
Hello folks. I have a question. We often see on the Vision forum that users start having problems with their service on Infinity that they weren't having with ADSL. Do you know of anything that would cause this?
7:35
Martin S.
Hi Glynn, we are currently reviewing Fibre on Demand and have not yet announced any pricing or availability details.
7:36
Comment From Chris
How reliable is that checker by chance?
7:37
Comment From Paul (Heanor)
Also I am booked for installation on 22nd May
7:37
KerryG
Nice one Paul  You'll be enjoying super fast speeds then too
7:38
Charles
HI guilbo - I'm not aware of any technical issues for Vision customer regrading to Infinity. We have hundreds of orders go through each week. If the problem persists, I would suggest customers contact the Infinity helpdesk.
7:38
Comment From Neil Potter
Thanks for your reply Charles - If I could ask, the PA's you supply with the current BT Vision boxes are manufactured by Simpler Networks - would I need to purchase identical PA's from the same manufacturer for extending my network? Will BT Retail sell me these as an additional extra? This will be my last question - I feel I have been fortunate to have two answered already
7:39
Martin S.
Hi Chris - The speeds estimated in the checker are a very good indication of actual speeds, but we can only know the exact speed once installed.
7:39
Comment From Eric Simpson
it says not available yet. I am just frustrated because I get faster speed from my little Android phone using it as a hotspot. If there is a bottleneck somewhere in the system, would fibre really make a difference
7:41
Comment From Kevin
I have been given the estimate of 59.4Mb download 20.0Mb upload will this be accurate?
7:42
Charles
Hi neil - yes you should always stick to the same model for all your PA's. I am pretty sure that additional Vision PA's can be bought from the BT Shop, and these should be fine. I have had 70mbps out of mine! seewww.bt.com/shop
7:43
Martin S.
Eric - Generally fibre can make a very significant difference to overall speeds, though individual increases can't be guaranteed. If / when it becomes available on your line, the checker will tell you how much of a difference it could make to you.
7:43
Comment From Chris
I'm assuming it's based on the length of copper from my house to the Green Cab. - The exchange is 2miles~ away from me and the said Cab. Will this also effect my speed?
7:45
Charles
Hi Kevin - our estinmates are as accurate as we can make them, but your actual speed will depend on your underlying phone line speed. We will only know your true speed once Infinity is live - it will then train to your optimal line speed, which should be approx as shown by your prediction.
7:45
KerryG
Glad to see you all keeping Charles and Martin busy here... keep the questions coming in, we're in the last 15 mins now...
7:45
Martin S.
Chris - Yes, your speed is primarily affected by the total amount of copper between you and the exchange. With FTTC fibre products, the old copper between the exchange and the cabinet is replaced by fibre, meaning less copper overall and faster speeds.
7:45
Comment From Lewis
Why does DLM take so long to take interleaving off?
7:45
Comment From Neil Potter
Thank you very much for your time this evening Charles / Martin / Kerry. It's nice to see these types of events becoming more accessible to your customers and I for one feel I've got a lot from joining you all this evening
7:46
Martin S.
Thanks Neil - you're welcome!
7:46
KerryG
Great stuff Neil.... glad you've found it useful.
7:46
Comment From Chris
The Cab is 500-600 metres away from me, and according this graph the the BT estimated speed is just right on that.
7:47
Charles
Hi Lewis - DLM will apply interleaving only if it detects an ustable line. It will not apply interleaving unless it is warranted.
7:47
Comment From Kevin
I guess when i get my infinity installed a lot of sites and links will still be on dsl or adsl+ or even slower and the speed my end wont improve the speed there end ie my speed will depend on the site i visit and there upload speed for my download speed?
7:48
Comment From Dom
I am moving to BT infinity, but I had to order my line and then wait for it to be activated before ordering infinity. Is this a technical issue or a process at BT issue?
7:49
Charles
Evening Dom. It's a process issue - we can only provide Infinity once a Retail line is up and running.
7:49
Comment From William Sinclair
Hi guys. I've upgraded to Infinity 2 with an estimated max download of 49.5 Mbps however my IP profile hasn't budged from the Infinity 1 value of ~30. Any thoughts?
7:50
Comment From Dom
Thanks - this is a great service BT, keep it up!
7:51
Martin S.
Hi Kevin - yes, some websites that you visit may not be able to keep up with your superfast speeds! We aim to give you the best speeds at your end, but sadly there may sometimes be bottlenecks in the wider internet.
7:51
Charles
HI William - sorry for the delay in responding. Best thing to do is to reboot your Hub, then it should pick up the new speed. If not, contact the Infinity forum.
7:51
Comment From Lewis
What would cause an unstable line?
7:53
KerryG
@wiesiek @ Martin (not S) thanks for your questions, but as they're individual issues we can't pick them up as part of this chat. Please post in the forum and we can help.
7:53
Comment From guilbo
Apologies in advance for my ignorance. If Infinity is installed does the 'phone continue to use copper all the way to the exchange or does this also go over fibre?
7:54
Charles
Hi lewis - the most common cause is interference on your phone line, in which case DLM will moderate your BB speed until the line stablises. There'smore lot of info on this at the Infinity FAQs on BT.com
7:54
Martin S.
Hi Guilbo - good question - yes, the phone still uses the copper.
7:54
Comment From Paul (Heanor)
Will downloading from such as Xbox market place or apple store as examples max out the connection?
7:55
Comment From Kevin
Thanks to Martin, Kerry, and Charles for all your answers to the questions very much appreciated and a credit to BT Kevin
7:55

Hi everyone
Just a reminder that we have our Infinity Expert chat this evening at 7pm. If for any reason you can't make the chat, you can PM me your questions in advance and we'll try to include them. There will also be a replay available of the chat here on the same post after the event.
Thx
Kerry
Retired BTCare Community Manager - StephanieG and SeanD are your new Community Managers
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Changing Header and Footer in Discussion Channel

Hello,
I need to change the header and footer graphics and links for the page that displays when you search for Discussion Channel topics and displaying Ciscussion Channel posts. I have been looking in the DiscussionProvider directory and I am now looking through the SearchProvider directory. Does anybody have an idea of the locations of the Header and Footer files?

I am sure someone in this forum has had the desire to change the headers from the default of SUN ONE Portal Server and has accomplished this throughout their implementation. Please help! I have succeeded in some containers like the JSPEditContainer so when someone edits bookmarks from a BookmarkProvider channel they see a header that I define, but not in the SearchProvider nor the DiscussionProvider directories. I have seen no mention or <include header.jsp> tags in the jsp files for either of these providers, and I have copied header.jsp and menubar.jsp to both of those directories but it is not picking up the files. Do these containers find the header and menubar.jsp file contents from another location?

Lumia Imaging SDK and PubCenter on WP8.1 RT : System.TypeLoadException

Hello, i'm developping a WP8.1 RT app using the Lumia imaging SDK for 8.1 and it's working like a charm. Recently, I had to put some PubCenter ads on my layout. When navigating to a page that is making calls to Imaging library, I catch an exception : "Requested
Windows Runtime type 'Lumia.Imaging.RandomAccessStramingImageSource' is not registered".
I tried reinstalling the Imaging SDK through nuget. The only way to make my code work again is to delete the reference 'Microsoft Advertising SDK for Windows Phone 8.1 (XAML)'.
I also tried to add this reference on a Lumia Imaging Sample from the official website, same problem but on different methods from the Lumia.Imaging namespace.
Do you guys already experienced this kind of errors ? Is PubCenter known to work with the Lumia Imaging SDK ? If not, is there any other good ad provider on WP8.1 RT (since Admob is no longer supported...)

This looks like is a Visual Studio 2013 update 4 issue, or if you are using Community Edition which includes this update.
The "Requested Windows Runtime type <class> is not registered" exception is caused by that fact that the appxmanifest is file is not correctly generated in VS2013 update 4. There is a bug in Microsoft.Build.AppxPackage.dll, creating an incomplete
list of classes to be registered. This is supposed to be fixed in VS2013 update 5.
Workaround:
Replace the AppxPackage files with VS2013 update 3 version.
- Microsoft.AppxPackage.Targets
- Microsoft.Build.AppxPackage.dll
Replace the two files located at VS2013 installation path (e.g. C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v12.0\AppxPackage\ ) with the update 3 version.
The update 3 files are available here (patch.zip):
https://onedrive.live.com/redir?resid=99B45FF02D12B84D!60194&authkey=!ACQoovyOLV-_7LQ&ithint=file%2czip
Hope this helps!

Discussion Forum - Retain Portal Login

Hi all,
Hope I'm in the right place for this.
We are looking to install a discussion forum solution (currently running 9.0.4.1.0 - Build: 129).
Ideally we would like the forum to work in the following way:
A user logs into the portal, clicks on 'Discussion Forum' tab and posts a message. We would like the message to insert their login name (#USER.FULLNAME#) along with their message i.e. the user doesnt have to register to the forum, or enter their name or email.
Is this possible with any of the forums out there?
Thanks for your time.

Hi There,
<p/>
You could check out the Oracle Provider for Jive Discussion Forums on Portal Integration Solutions page. You will need to buy Jive Discussion Forums and then install the providers.
<p/>
What you are asking for is definitely possible as the portlets provide a single sign-on mechanism to the users.
<p/>
thanks
Harsha

Error during register discussion forum provider

Hi,
I have AS 10.1.2.0.0.
I deployed the Discussion Forum successfully -> I can access the provider test page.
But when I try to register the forum provider in Portal I get the following error:
Internal error (WWC-00006)
An unexpected error occurred: Invalid column index (WWC-43000)
Any help would be highly appreciated as there is no support through OS for it and I don't have any idea what's going wrong...
Best Regards
Manfred

Hi
Yes, the registratio was ok, and when access the URL :
http://diesel.agencia.anp.gov.br:7778/df/providers
Congratulations! You have successfully reached your Provider's Test Page.
Checking for components:
Portlets are:
DiscussionForum_Portlet
The application.log file is undedr another directory:
%OC4J_HOME%/j2ee/OC4J_Portal/application-deployments/df/OC4J_Portal_default_Island_1/application.log
and there is a lot of errors on it. I´ll send it by email for you.

Interconnecting MDS 9148 with 2 different Fiber Providers

Hi
I would like discuss the following issue :
We have 2 HP SAN EVA 8400 ( one at the production site and one at our Disaster Recovery site ) replicating using a fiber channel service from ( 2* FC dark fiber from PROVIDER A )
They are linked together with 4 Cisco MDS 9148 Multilayer Fabric Switch (2 fabric ).
We have recently purchased a new fiber service ( 2* 1Gb FC managed service from PROVIDER B) in order to create a port channel with the 2 running ones and we have some problem.
We disconnected the PROVIDER A FC ( running for 10 years now ) and left the SAN replication during a couple of days running with the new PROVIDER B 1 Gb FC to make sure the link was stable and we had no issue.
Then we tried to connect the 2 FC together from the 2 providers and tried to create a Port channel.
However we discovered that to create a PortChannel, interfaces must have the same configurations ( speed, mode, rate )
In our case , the interface FC 1/1 using PROVIDER A link is running at 4 Gb and the interface FC 1/2 using PROVIDER B is running at 1 Gb
PROVIDER A dark fiber
PROVIDER B fiber managed service
fc1/1 is trunking
    Hardware is Fibre Channel, SFP is CWDM-1550
    Port WWN is 20:01:00:05:9b:72:b1:60
    Peer port WWN is 20:01:00:05:9b:72:b1:a0
    Admin port mode is E, trunk mode is on
    snmp link state traps are enabled
    Port mode is TE
    Port vsan is 1
    Speed is 4 Gbps
    Rate mode is dedicated
    Transmit B2B Credit is 32
    Receive B2B Credit is 32
    B2B State Change Number is 14
    Receive data field Size is 2112
    Beacon is turned off
    Trunk vsans (admin allowed and active) (1)
    Trunk vsans (up)                       (1)
    Trunk vsans (isolated)                 ()
    Trunk vsans (initializing)             ()
    5 minutes input rate 4416 bits/sec, 552 bytes/sec, 6 frames/sec
    5 minutes output rate 91616 bits/sec, 11452 bytes/sec, 11 frames/sec
      51537358280 frames input, 50955393731852 bytes
        0 discards, 0 errors
        0 CRC, 0 unknown class
        0 too long, 0 too short
      223256095067 frames output, 408667816663528 bytes
        32 discards, 0 errors
      34 input OLS, 36 LRR, 51 NOS, 0 loop inits
      53 output OLS, 35 LRR, 45 NOS, 0 loop inits
      32 receive B2B credit remaining
      32 transmit B2B credit remaining
      28 low priority transmit B2B credit remaining
    Interface last changed at Fri Dec 14 17:02:48 2012
fc1/2 is trunking
    Hardware is Fibre Channel, SFP is short wave laser w/o OFC (SN)
    Port WWN is 20:02:00:05:9b:72:b1:60
    Peer port WWN is 20:02:00:05:9b:72:b1:a0
    Admin port mode is E, trunk mode is on
    snmp link state traps are enabled
    Port mode is TE
    Port vsan is 1
    Speed is 1 Gbps
    Rate mode is dedicated
    Transmit B2B Credit is 32
    Receive B2B Credit is 32
    B2B State Change Number is 14
    Receive data field Size is 2112
    Beacon is turned off
    Trunk vsans (admin allowed and active) (1)
    Trunk vsans (up)                       (1)
    Trunk vsans (isolated)                 ()
    Trunk vsans (initializing)             ()
    5 minutes input rate 48 bits/sec, 6 bytes/sec, 0 frames/sec
    5 minutes output rate 48 bits/sec, 6 bytes/sec, 0 frames/sec
      39496053 frames input, 2696451760 bytes
        0 discards, 0 errors
        0 CRC, 0 unknown class
        0 too long, 0 too short
      167653989 frames output, 230540944084 bytes
        70 discards, 0 errors
      40377 input OLS, 345 LRR, 4248 NOS, 0 loop inits
      5186 output OLS, 1154 LRR, 39568 NOS, 0 loop inits
      32 receive B2B credit remaining
      32 transmit B2B credit remaining
      28 low priority transmit B2B credit remaining
    Interface last changed at Fri Dec 14 16:50:42 2012
So we tried to force the FC 1/1 to run at 1 Gb ( same speed as FC 1/2 ) to create the PortChannel, by doing the basic command on the interface : Switchport speed 1000
Since that , our SAN is logging every 10/15 minutes the following errors :
---------- Problem Found: CUST: CA informational: EVA8400_LIVE: Write resources on the inter site link have been reduced. at Fri 14 Dec 2012 17:21:04 GMT+01:00 ----------
---------- Problem Found: CUST: CA warning: EVA8400_DR: Excessive out of order message rate on the inter site link. at Fri 14 Dec 2012 17:27:04 GMT+01:00 ----------
---------- Problem Found: CUST: CA warning: EVA8400_DR: Excessive data exchange retry rate on the inter site link. at Fri 14 Dec 2012 17:41:34 GMT+01:00 ----------
---------- Problem Found: CUST: CA warning: EVA8400_LIVE: Excessive data exchange retry rate on the inter site link. at Fri 14 Dec 2012 17:41:49 GMT+01:00 ----------
We have the following questions :
Have you already seen that kind of situation ?
Is there a best practice to reduce the interface speed in order to create the PortChannel with identical interface setup ?
Your help and advice would be much appreciated.
Regards

the RTT delay by each link is different and this is causing packets to arrive out of order.
not sure if port channeling between two different links or different characteristics is good practive.

Are you inviting us to discuss BT's challenge to t...

Kerry G wrote:
http://community.bt.com/t5/Announcements/The-buzz-around-BT-and-The-Digital-Economy-Act/m-p/27335#M3...
The buzz around BT and The Digital Economy Act
Hi everyone
Perhaps if you've read the news, you'll know that BT is legally challenging the UK’s Digital Economy Act because it says it is unfair to customers. If you're wondering what it's all about, here's some info.
Thanks
Kerry G
BTCare Community Manager
What is the Digital Economy Act and how does it affect me?
The Digital Economy Act is designed to prevent copyright infringement by requiring internet service providers to act against persistent offenders. BT and TalkTalk have concerns about the Act and have asked for a judicial review to find out whether the Act is enforceable under European rules.
How would service providers be expected to act against persistent offenders?
Service providers could be asked to cut off an entire household's internet connection. This assumes guilt and would ensure that everyone in a household stopped using the internet for legitimate purposes; other people would suffer the consequences too.
Don’t you agree with protecting copyright?
Breach of copyright is entirely wrong but action against those who access or share music, movies and other material unlawfully needs to follow due process and be proportionate.
Are you inviting us to have a discussion on the DE Act?
And BT's challenge to it?
Privacy, internet copyright infringement, tracking, EU e-Privacy Directive, and all that stuff?
Clauses 1 - 48 and Schedules 1 & 2?
http://www.opsi.gov.uk/acts/acts2010/ukpga_20100024_en_1
Which section of this forum should we kick off in please?
Or is here the right place?
And what are the guidelines for such a discussion please? In terms of what we can say, and quote and link to?
And what opinions we can express?
Are you SURE about this?
My broadband secrets and tips

Hi Linda_Smith
This announcement was for info for everyone as I know there has been press coverage on this. We don’t have anything else to say on this at the moment.
Thanks for your interest.
Kerry
Retired BTCare Community Manager - StephanieG and SeanD are your new Community Managers
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Discussion forum Cannot find the configuration file config\common\bc4j.xcfg

I successfully deployed the discussion form portlet and registered it with portal. I can reach the provider test page at Http://myserver:7777/forum/providers/forum
Everything seems to be good except when I add the portlet to a page, and then view the page, I see an error in the portlet:
"Unable to perform the operation: JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-33001: Cannot find the configuration file config\common\bc4j.xcfg in the classpath"
I have verified that bc4j.xcfg (as I have modified it) exists in:
$IAS_HOME\j2ee\OC4J_Portal\applications\forum\forum\WEB-INF\classes\config\common
I followed the instructions exactly. Does anyone know how to resolve this error? I'm running portal 9.0.2.3.0B, PDK 9.0.2.6.2 and the latest discussion forum download (downloaded 7/1/2004)
Many thanks in advance!

No ideas anyone?

External RAID-1 storage providers?

I'm looking for suggestions and providers of RAID-1 (mirroring) storage solutions. I work in-house for a corporate video company and we think that an external RAID-1 storage would be best. I'm also very open to hear what other people think would work for us as i'd rate my technical knowledge at intermediate.
All our work is currently DV25. We may switch to HDV in 2 years or so. Currently we're working off various single drive Firewire or USB 2.0-based hard drives. Thus, I don't believe read speed is a concern for our needs. Also, I read alot about the drive speeds of technology like SATA III, so maybe read speed is a null issue?
We like RAID-1 for it's simplicity, it's very easy to understand how it works . It also feels like the right 'place' we'd like to be on the backup spectrum. We could be more intense with the backups (e.g. multiple backup drives at off-shore locations) or less intense (simply burn project files to DVD), so RAID-1 feels like a nice balance.
Cost is almost a null issue. But we're looking for a solution that provides for some portability. So we're not looking for some intense multi-server rack solution, but more something like a typical LaCie drive that we can put into our backpack and move to a different location. We definietly don't mind paying extra for the 'backup' drive as it pays off for us in piece of mind and ease of use.
How we're basically looking to do this is that when we're done a project and the RAID-1 is near full, we would simply catalogue it (whole different discussion lol), then place it on a nice looking shelf for clients to gawk at. We don't generate a ton of data. With the availability of 1+ TB hard drives, we would probably only be putting one or two RAID-1 drives into our storage space per year.
In terms of a RAID-1 drive/provider, we'd prefer to deal with a company that would still be around and relevant ~10 years down the road. Great customer service is also key. Internal build quality is important, and i'd be very happy to have an ugly ugly chassis if the internal parts were top notch. We also live in Canada incase that's an issue. We bought a G-Tech drive a while back and had to pay an extra 20% on it due to import duties .

Thanks Shane for the reply! My last experience with 'hot swap' was ~5 years ago with a server. It required a bunch of special trays, and I had extra hard drives pre mounted into these trays for hot swap daily backups. What is hot swapping a drive like now a days? Is it simply plug and play?
How durable is the CalDigit FirewireVR? The front grill looks delicate :S. As I may bring the drive to different locations (though it would be reasonably cushioned), durability is important to me.
Would you recommend that I buy spare hard drives directly from the enclosure manufacturer (e.g. CalDigit)? Do you know why they are so expensive (250 GB drive from CalDigit ~$120), higher quality? Since i'm doing RAID-1, would it be ok for me to buy drives from Best Buy (could get 500 GB for ~$100).
Also to clarify my previous post, our intention would be to use multiple enclosures. So once the RAID-1 is filled, we would NOT take out both hard drives and put them on the shelf. Rather we'd prefer to simply put the enclosure, WITH the hard drives inside, onto the shelf.
But if hot swapping IS simply 'plop in the naked hard drive and you're good to go', then maybe I'd be open to simply storing the RAID-1 hard drive pair on the shelf...
Message was edited by: Phillip Roh

Malformed URL Exception causing discussion channels to fail.

Hello,
I created several new discussion channels in role level DisplayProfileXML files using DiscussionsProvider. The channels are not displaying proper content but are displaying error messages: ERROR: Content is not available
This function worked previously using the defalt discussions channel that was already created with the install of the sample portal
I have tried restarting the server, doing the redeploy command.
Here is the error text. Any help would be appreciated!
11/17/2005 12:56:49:836 AM EST: Thread[Thread-98,5,main]
ERROR: JspServletEnvironment.getRealPath():
java.net.MalformedURLException: JspServletEnvironment.getResource(): not found for channelName=LDTLaunchDiscussionChannel, path=discussionContent.jsp
at com.sun.portal.providers.jsp.JspServletEnvironment.getResource(JspServletEnvironment.java:206)
at com.sun.portal.providers.jsp.JspServletEnvironment.getRealPath(JspServletEnvironment.java:133)
at com.sun.portal.providers.jsp.JSPProvider.getJspWrapper(JSPProvider.java:706)
at com.sun.portal.providers.jsp.JSPProvider.getContent(JSPProvider.java:544)
at com.sun.portal.desktop.context.ReusableProviderCaller.run(ReusableProviderCaller.java:158)
11/17/2005 12:56:49:886 AM EST: Thread[Thread-98,5,main]
ERROR: ProviderCaller.run(): exception thrown from LDTLaunchDiscussionChannel
com.sun.portal.providers.ProviderException: JSPProvider.getJspWrapper(): jsp=discussionContent.jsp, com.sun.portal.providers.ProviderException: JSP file not found: discussionContent.jsp
at com.sun.portal.providers.jsp.JSPProvider.getJspWrapper(JSPProvider.java:763)
at com.sun.portal.providers.jsp.JSPProvider.getContent(JSPProvider.java:544)
at com.sun.portal.desktop.context.ReusableProviderCaller.run(ReusableProviderCaller.java:158)
com.sun.portal.providers.ProviderException: JSP file not found: discussionContent.jsp
at com.sun.portal.providers.jsp.JSPProvider.getJspWrapper(JSPProvider.java:710)
at com.sun.portal.providers.jsp.JSPProvider.getContent(JSPProvider.java:544)
at com.sun.portal.desktop.context.ReusableProviderCaller.run(ReusableProviderCaller.java:158)
11/17/2005 12:57:26:769 AM EST: Thread[Thread-103,5,main]
ERROR: JspServletEnvironment.getRealPath():
java.net.MalformedURLException: JspServletEnvironment.getResource(): not found for channelName=MLTDiscussionChannel, path=discussionContent.jsp
at com.sun.portal.providers.jsp.JspServletEnvironment.getResource(JspServletEnvironment.java:206)
at com.sun.portal.providers.jsp.JspServletEnvironment.getRealPath(JspServletEnvironment.java:133)
at com.sun.portal.providers.jsp.JSPProvider.getJspWrapper(JSPProvider.java:706)
at com.sun.portal.providers.jsp.JSPProvider.getContent(JSPProvider.java:544)
at com.sun.portal.desktop.context.ReusableProviderCaller.run(ReusableProviderCaller.java:158)
11/17/2005 12:57:26:769 AM EST: Thread[Thread-103,5,main]
ERROR: ProviderCaller.run(): exception thrown from MLTDiscussionChannel
com.sun.portal.providers.ProviderException: JSPProvider.getJspWrapper(): jsp=discussionContent.jsp, com.sun.portal.providers.ProviderException: JSP file not found: discussionContent.jsp
at com.sun.portal.providers.jsp.JSPProvider.getJspWrapper(JSPProvider.java:763)
at com.sun.portal.providers.jsp.JSPProvider.getContent(JSPProvider.java:544)
at com.sun.portal.desktop.context.ReusableProviderCaller.run(ReusableProviderCaller.java:158)
com.sun.portal.providers.ProviderException: JSP file not found: discussionContent.jsp
at com.sun.portal.providers.jsp.JSPProvider.getJspWrapper(JSPProvider.java:710)
at com.sun.portal.providers.jsp.JSPProvider.getContent(JSPProvider.java:544)
at com.sun.portal.desktop.context.ReusableProviderCaller.run(ReusableProviderCaller.java:158)

Found it - stepping into the remoteObject.execute() call in debug mode, I eventually got to the class that throws the error (com.sap.tc.webdynpro.model.webservice.model.WSGenericModelClassExecutable). In the catch block of the operation invoke call, the actual error object is visible in the NWDS variables list - it was an XmlMarshallException:
"com.sap.engine.services.webservices.jaxrpc.exceptions.XmlMarshalException: XML Serialization Error. Property [LOVLanguageMode] of class [com.bp.models.siebel.servicerequest.ServiceRequestQueryPage_Input] must exist and can not be null. This is required by schema description."
So I hadn't populated a mandatory field in the xml!
Russell.

Win 8 discussion - take note

All,
We truly appreciate for your participation here in Lenovo Community especially in Windows 8 forum.
However, please take note that this Windows 8 forum board is created for discussions evolve around Lenovo products. Should it touches specifically Windows 8 development in details, we strongly encourage you to share your feedback in the appropriate channels.
Many thanks for your co-operation.
Best regards,
Cleo
WW Social Media
T61, T410, x240, Z500, Flex 14
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

One further point, please no offense intended.
I lost access to my blogger account with Google several years ago, automated spam clearing bot of Google just deleted everything. Months passed before I managed to actually get my data restored. My point here is I now simply do not trust the "cloud" with my data. They make no substantive guarantees as to privacy, nor availability on a day to day basis or in the longer term. So I am wed to a local copy as well as a cloud copy. I think they cover different loss scenarios. My local copy might get wet or burned, the cloud might get hacked or the company just loose the data.
Some suggestions I can make that might help long term is create an exception for the Thunderbird profile folders in your anti virus program. They do not need to be scanned every time you move or delete a mail.
Turn off incoming mail scanning. Especially if your are using Nortons. Most Thunderbird users are using SSL or TLS. Most ISP's and free mail providers now require it. Nortons does not scan email over encrypted connections. So the functionality can only have a downside.

Discussion Forum installation problem

Hi,
I'm having trouble installing the discussion forum by Peter Moskovits. The test page (http://server:port/df/providers) gives the message "The page cannot be found". It seems to be looking for a /df/ directory under /htdocs/. Can anyone help me?
Thanks
Carey
PS. I have Portal 902 installed on Windows 2000.

Hi Carey,
Has the application been deployed successfully (ear file unzipped, ...)?
Did you make all the necessary changes to the config files (http-web-site.xml, server.xml)? Can you double-check whether you have any typos in there?
Could you post the relevant sections of the config files here?
Peter

I cannot connect to the internet after switching providers. I've changed the email address associated with the new account but am sure there is something else I need to change. Can anyone help me?

I cannot connect to the internet after switching providers. I've changed the email address associated with the new account but am sure there is something else I need to change.   I have also changed the apple information as well including user name and password. Can anyone help me? (This is an ipad question).

Apple ID: Changing your Apple ID
http://support.apple.com/kb/ht5621
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796?viewlocale=en_US&locale=en_US
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
iOS: Changing the signed-in iTunes Store Apple ID Account
http://support.apple.com/kb/ht1311
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Ad providers discussion: PubCenter, Smaato, InnerActive, AdMob, MobFox, VServ.mobi, MillennialMedia, InMobi, AdDuplex, komlimobile, adwired, mOcean

Similar Messages

Maybe you are looking for