AD Site / IP Range Boundary Question

We have one small office that is included in our primary AD Site and this will not change. This site has its own boundary and DP's.
I am creating a DP for that office and am wondering how I can ensure that this office will exclusively use that DP once it is deployed.
I can create an IP Range boundary for that office, but it will overlap with what is in the AD site. I think this should be something simple that I am overlooking.
Thanks In Advance
Kev

Hi,
Have a read on this,
http://it.peikkoluola.net/2013/10/29/designing-boundaries-and-overlapping-boundaries-in-sccm-2012/
Regards,
Hau

Similar Messages

I was on the apple support site and typed my question in the small box at the bottom but couldn't figure out how to send it. The person at the other end couldn't read what I typed.

I was on the apple support site and typed my question in the small box at the bottom but couldn't figure out how to send it. The person at the other end couldn't read what I typed. I have a new OS10.8.4 and can't find "empty cache" when I'm ready to close Safari. How do I do this? Thanks

https://discussions.apple.com/thread/4448839

Range Operator Question

Hello all,
I asked a question yesterday under the title of "Range
Operator for first 2 letters of item" which was answered promptly and was much appreciated. I have since encountered another problem and would like another example if possible.
How would I search for all folders under C:\ that start with "Commercial_Global_Trading" through the end of all folders that start with "C"? Can I use a Range Operator for this as well?
Hopefully it makes sense what I'm asking!
Thanks!

Yes it is a bit confusing. Maybe an answer from my previous post will help clear up what I'm asking:
Using range operators, we can get folders that start with A, B, and C by saying:
get-childitem 'C:\Folder\[a-c]*'
We can also get folders that start with Aa, Ab, and Ac by saying:
get-childitem 'C:\Folder\A[a-c]*'
What I'm wondering is, is there a way to get all folders in a range, beginning with a specific
word and then continue through the rest of the range? For example:
The folder C:\Folder contains the following 6 folders:
Account
Commercial
Commodity
Commodity_Product
Conduct
Finance
How would I use range operators in get-childitem to return the folders that start with Commodity, and then continue on through the rest of the C's? So the output would be the folders Commodity, Commodity_Product, and Conduct. The folder "Commercial" would
be excluded from the output. Is this possible using Range Operators and Get-ChildItem?

Do I need multiple primary sites? Some design questions..

I have about a thousand users & devices, across two sites. Setting up SCCM 2012 R2 and wondering if I need to have multiple primary sites?
From everything I've read so far, it seems that a single standalone site will handle tens of thousands of users/devices or some very large number, so I'm not sure if I'd ever need a secondary site or what it's function would be - failover, backup, or is
it just best practice to have different roles spread across multiple servers?
I was originally thinking of just doing a single primary site on a single server. But then I'm not sure if my DP should be separate.
Can someone point me the the right direction to a high level planning document or blog?
Thanks
Nathan

How many clients are there in total? How many at each location? What's the WAN speed in between?
Multiple primaries are only needed for scale out purposes (>100k clients)!
Torsten Meringer | http://www.mssccmfaq.de
About 500 at each, T1 speeds connect the sites, so I want to enable software metering I think.
Also - if I have a single server with DP role installed, what kind of RAM/HD requirements are needed? I know this probably varies with the install/features, but are there any ballpark estimates/starting points posted? Sorry I know this is probably
on the MS site somewhere, the the volume of information is hard to weed through. Update, I found some good guidelines here:
http://myitforum.com/myitforumwp/2012/06/27/sccm-2012-site-hardware-requirements/
For 1000 or less users, is a single Gb NIC sufficient? Sounds like it might be? Also, when using a virtual machine, do you need to still somehow separate SQL logs & data from OS?
Update #2, looks like that above post answered that question too:
If you’re in a VM, it’s not sufficient to have a single VHD file, and having the roles split among 4 virtual drives inside that file. It’s not sufficient to have that single file on a shared set of remote disks. It’s not sufficient to have that
single file on a dedicated set of disks, regardless of the number and size of those disks. Any VM should be configured to only run the OS, and the 3 other spindles should be dedicated sets of disks, attached to the VM. Otherwise, it’s like painting
with watercolors in a hurricane…you’re spending a lot of time, looking creative, with zero value.
But I'll take any follow up comments or recommendations if you have them on proper VM setup.
Thanks
Nathan

AP-grouping and SIte-Specific Vlan's question

Hi Friends,
I was wondering if Site-specific Vlan's can be implemented on Guest-vlans where SSId's are anchored to Anchor-controllers from main controllers.
I will appreciate any inputs.
Thanks
JAy

Unfortunately I don't believe this can be done. I've run in to this question before at least one other time.
Basically, AP Groups (inteface assignment) only work for the clients local to that controller. Once you hit an "anchored wlan" you are not using the interface assigned by the AP group.
As an anchored client, you are not seen as connected from a particular AP, but instead are see as a client from the foreign controller.
Your only option would be to create multiple SSIDs and map each SSID on the anchor controller to the required vlan. You could use AP groups (wlan override) to specify which guest ssid you want on a particular AP, but I think thats your only option
Perhaps if you were anchoring a client doing 802.1x, you could pass interface/vlan parameters that way, but it wouldn't work for a typical "webauth guest user"

Editing FP site with Dreamweaver (was "Question please")

This may be a stupid question, but I am not that familiar with web design. I have a web page that I created using Front Page. Can I maintain that site using Dreamweaver?
Thanks
Don

Hans always has good suggestions!
Also look here:
http://forums.adobe.com/thread/429114 -- FAQ
http://www.adobe.com/devnet/dreamweaver/?view=gettingstarted -- Getting Started w/DW
http://www.adobe.com/devnet/dreamweaver/articles/frontpage_to_dw8.html -- Migrating from FP to DW
http://kb2.adobe.com/cps/140/tn_14031.html -- converting an FP site to DW
At the beginning of this year, I moved from FP to DW. There is a definite learning curve and you must bite the bullet and learn some CSS in addition to HTML. There is great information on the Adobe website and lots of folks here who are very generous with their time to offer help. And, yes, when posting try to describe your problem in a few words in the subject line. You will get help much faster when you do that.
John

Short-range wireless question

My computer sits across the room from the telephone outlet. I would like to get rid of the telephone line I now have running to the DSL modem and the Ethernet cable running from it to my Mini. The guy at the Apple store suggested I get the AirPort Express Base Station, which, he said, would make it possible to use my computer "all over the house." The $99 price tag is certainly worth it for that kind of range. However, I live in a studio apartment, so the $99 price tag is a bit of overkill for me.
Can someone suggest a cheaper product? Its range only needs to be about 15'.

Thanks. I wondered if every router would have software that would work with a Mac. The guy at Radio Shack first checked the box to see if it would before he recommended a $70 unit, which he preferred because he said the cheaper ones were more difficult to set up. So that was another concern.
I just looked on Craig's list and noticed a couple advertised locally for $5 and $10. I'll check them out.
For the telephone itself, I'll get a 2-phone cordless with the base unit set by the telephone outlet and the other unit on my desk.

Router and range booster question. PLEASE HELP! :(

Okay so I used to use the WRT54G router and since I upgraded to a new WiFi router / modem I don't need to Linksys one anymore. Well my neighbors aren't getting a very good signal and I managed to find an old WRE54G Range Booster in a box. Well my question is that if I set up the WRT54G router and Range Booster at their house would they be able to have a stronger signal if trying to connect to my new WiFi router? Oh its a HUAWEI, this seems like a pretty easy question and I'm guessing it wont work but I am just wonder like what are my options here to get them a better signal with these 3 components. Thanks!
Solved!
Go to Solution.

You can certainally try the WRE in their house but 1 bar may not be enough to repeat the signal throughout their house.
Another thing you can try is to try and position the WRE somewhere in your house that is as close as possible to their house and aim the antenna towards their house.
As I recall I think the V3 version of the WRE has an ethernet port underneath a cap on top (I don't think V1 and V2 had one) but I believe that it was only intended for setting up the range extender. If you can get a sufficient wireless signal into their house I think you would have to have their laptop connect wirelessly to the WRE.

Site finished with one question

Hello my site is done and is up and running on the internet.
www.bluelikethecolor.com
Please go and look and rate it if you wish on a 1-10 scale.
Also I have a question
I need to make the site so it opens up from the html page to
a new window that is the exact size (sizable?) of the flash file. I
would like it so you cannot resize the window like how all those
pop up guys do. I want just the flash file, with no tool bars or
anything. How?
I will be making a test page in dreamweaver that I want to
test to see if you have the correct flash installed and have the
links to install it then go to my page how do I do that?

Hello my site is done and is up and running on the internet.
www.bluelikethecolor.com
Please go and look and rate it if you wish on a 1-10 scale.
Also I have a question
I need to make the site so it opens up from the html page to
a new window that is the exact size (sizable?) of the flash file. I
would like it so you cannot resize the window like how all those
pop up guys do. I want just the flash file, with no tool bars or
anything. How?
I will be making a test page in dreamweaver that I want to
test to see if you have the correct flash installed and have the
links to install it then go to my page how do I do that?

Multi site, multi vlan configuration question

Hi Brian,Good questions.If the router connects to the switch on a VLAN 1 access port then it is a non-issue since the packets are not tagged.If there is a trunk between the router and the switch with tagged traffic, then I would recommend using inside and outside VLANs on the switch. Essentially this is just two VLANs, one for each Wanos interface so that it sits in the middle of the traffic flow. For example the gateway would say be in a VLAN 100 sub-interface on the router. Wanos wan0 would be in VLAN 100 and the lan0 interface remain in VLAN 1 along with the devices. The only way to the gateway is through the bridge. The bridge deployment is almost always the simplest way to get going, but where it is not possible, router mode is also available.Express will be ok for one remote location and if either direction across the WAN is...

Ok, I'm getting ready to setup Wanos for a test run at one of our remote locations. I'm seeing packet loss on the circuit to this specific site and I want to test the packet loss recovery capability of Wanos. Our network topology is point to multipoint with MPLS connections between our main location and each of our 7 remote offices. So at our main location if I read correctly I would have to add a bypass rule for all the other offices that do not have a Wan optimization device.I have to preface my question with this... we have VLAN tagging going on at the remote locations for data and voice. The switch is ultimately responsible for the tagging of the packets. The IP phones and computers are both on completely different networks. The devices are assigned their IP's from the router through DHCP with the data VLAN 1 as the default. The...
This topic first appeared in the Spiceworks Community

Site definition settings - simple question

When I use Dreamweaver to FTP my site elements via my Mac I
have no problems. Sadly not the case with a PC though. I cannot
connect, yet all the site definition settings are the same as for
my Mac. Is this a simple problem to solve?

As David says, such problems are almost always the result of
Firewall
intervention. You might consider disabling the firewall
altogether if you
are using a Router for your internet connection, since the
router also
provides this functionality.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"dulcettones" <[email protected]> wrote in
message
news:euqmjt$o3d$[email protected]..
> Hello David.
>
> I've checked the passive FTP box. Now when I try to
connect it finds the
> /www/ folder where the site elements belong, but it
doesn't show any of
> them.
>
> When you say change the firewall settings, do you mean I
have to disable
> them
> everytime I want to FTP to the server. I cannot find a
check box that
> enables
> the McAfee security centre to allow Dreamweaver inbound
and outbound
> access.
>
> Thanks for your help.
>

Wrn300n range issue question

do you need the companion wpc300n, or can you get extended range using a g?

" using a G-standard adapter/card, you will only get the G-standard capability of your wrt300n... "
Thats odd....I asked the store "specialist" at CompUSA if the WRT300n would increase the range to my regular G notebooks. He told me that not only would the range be significantly increased, but I might see a bump-up in speed or rather more consistant 54mbps connection. ...the perfoemance and connection is WORSE than the Netgerar regular "G" router that replaced it (which only cost me only $10.)
(Mod Note: Edited for non-compliance of forum guidelines.)
Message Edited by daikunzeon on 11-26-2006 08:54 AM

Bleed boundary question

I have a multipage document with spreads (facing pages). The document is showing the bleed boundary, although, in the Document Presets, all four bleed values are zero (and I have no bleeds in the document). It is only displayed in this one document. If I create a new document with the same Document Presets, the bleed boundary is not displayed.
I don't see this as a big issue, but I am curious as to why it is displayed in only one document, and why it is displayed at all, when the settings are all zero.
Does anyone have any ideas?
I searched this forum but I didn't find any relevant posts.
My computer is a Dell Inspiron 6000 with a 1.5 GHz pentium M processor, 2 GB of RAM, and Win XP/Pro SP3

Presets only define the starting condition. You can add or remove the bleeds at any time (even during file creation using a preset) by opeing the document setup dialog.

Out-of-range security question: Export a certificate with the private key

Hi Forumers'
As above title mention, if we doing PKI, we sure will get invovle with Certificate.
The moment i doing WLC and ACS express appliance, where the appliances is not coming with generate CSR feature...So we use openSSL for it.
To clear my curiousity, Why we need to export the certifiate wit the private key? Itsn't the private key cannot publish to the public ??
Thanks
Noel

Because both appliances are acting as a server, and you would need to have the private key on the server. However, you don't give the private key to all the clients for sure as you mentioned you only need to provide public key to the client, not the private key. Private key should only be kept on the server, and in this case both appliances are the server.

Site with div newbee question - content is not showing rights

Hi
I have set up a template with div codes and it looks right.
However as soon as I am putting content into my editable div (content) - the design goes funny. I am sure there is something stupid that I made wrong.
Can you help?
That is how it should look like (apart from the footer)
http://www.heroldes.com/jac/site_vorschlag/show_right.html
and this happens, when I put content into it.
http://www.heroldes.com/jac/site_vorschlag/vorschlag_badcontent.html
Code css
http://www.heroldes.com/jac/site_vorschlag/show_right.html
Looking forward to your reply
Cader

cader01 wrote:
Hi
Yes the BG picture is in the right place.
I have posted another link just to show what happens if I put more text.
The container is defined long enough - but it just mosves everything around.
http://www.heroldes.com/jac/screenshot.PNG
The background images are not in the correct place on the server so its difficult for me to see what is going on because I can't see the whole picture.
However looking at your css you should never set a height on a <div> unless you actually know what height it is going to be and you will only ever know that on 2 ocassions:
1) If only an image/s is in the <div>
2) When you specifically set the height of a <div> for a scrolling area.
I would remove any height from the <divs> where they not needed. Setting height for <divs> will generally pose you a nightmare as you can never keep track of them. Building for the web is ALL to do with mathematics and calculations. If you are out by the slightest, only has to be a pixel, then you could find yourself in all sorts of problems.

AD Site / IP Range Boundary Question

Similar Messages

Maybe you are looking for